For the ignition on these trucks, yes you need the key in order to pull it out normally. However, you can actually just drill out the key tumbler, go to the parts store and get a new tumbler for the tuck and pop it in like normal. I had to do that with mine. Its pretty easy to do as well.
Guy I got my 78 truck from the reason he sold it didn't know how to put the tumbler in correctly and he put it in and it stayed in the start position and he drove it like that. Luckily the starter teeth were softer than the flywheel. I bought it without being able to start it. a $25 starter and installing the ignition cylinder correctly I've driven it like 5 years now. Lol
I really like the way Craig takes pride in cleaning up these old vehicles, and we must have close to the same taste as I love old Ford trucks, and fox body cars in general. I can't wait to see this done and put to work. Also hats off to Dylan for helping you guys out with the truck.
This is a fun watch. I am currently working on a 1965 F100 that has been off the road since at least 2004 and was left abandoned in the back yard of an acquaintance of mine. It has been one of the most exciting and frustrating thing I have ever done. I just finished a full engine rebuild on the old 300 inline 6, now I am on to rebuilding the 3 speed manual transmission. Still so much work to do but can see the end of it coming soon.
I have a 1990 F250 I'm fixing up (I have a video on my channel of it) but after watching these videos, kind of wish I went with a late 60s body style ford like you guys
@@Wrenchingredneck I'm about 3k into mine so far. Most of it was from the machine work for the engine rebuild, and hunting down engine parts because the head on mine was cracked.
Absolutely awesome truck. It’s extremely satisfying just putting some elbow grease in getting it to look like it’s former glory. Really like the collab with Dylan as well. Getting your frequent flyer miles built up this year!
after I graduated from high school (1977) I worked for our County HI way department; I remember that they had a similar truck sitting around. It wasn't used much, but I always thought that ought to be mass produced... forty + years later, now EVERYONE makes crew cabs and club cabs ... the one you have is a real treasure!!!
I can really relate to watching you guys doing your archeological dig through the cab - loved that part of the video. I have a 78 crew 4WD that was originally bought new by a local logging company based in Woodland, here in SW Washington State. They used it as a crummy and welded a tow bar bracket to the front of the frame. These trucks were produced in Windsor Canada (at least mine was) by altering a single cab, hence the propensity to rust in the drip rails. Not only are the bench seats identical, so is the side window glass. In fact the rear doors are essentially just front doors without wing windows. I think they also used van hinges instead. In any case I cleared out the entire cab for a repaint, and my big surprise was finding two one-hundred dollar bills neatly folded and hidden under the factory rubber floor carpeting. They were printed in the early 1980's. I wish now I hadn't spent them, but at the time of my project that paid for all the paint.
Pull the carpet out, power wash it, then use your shop vac to extract the water. Take out the floor mat, then scrub the bare floor and bleach it. That will kill most of the smell.
Man I love that truck and I like the patina look You guys are having a blast and fixing up a pretty rare old Ford truck that's always exciting 🤠 Keep up the good work and long live the mullet✊
Being able to play Columbo and figure out the backstory is a huge plus in my book. Plus it doesn't look like it was abused at all. Not coddled. But not beat on.
12:35 Just some input on old tapes, that tape will sell for some good money online like ebay. Probably $20-25 for every sealed Type II cassette, especially Maxell and TDK. Type III and Metal cassettes if you come into those, that gets into real money for what you're selling. Type II probably around $40, and metal tapes can sell upwards of $100-250 sealed. Make sure to keep an eye out for those, and don't just throw em away. Capable of great sound and they don't make em anymore. People buy up old tape stock like mad. Even if you find used recorded tapes, but good tapes, just run them past an erase head and sell em for $10 less as used, they still sell. Highly recommend anyone who does revivals on old cars where they come by these to do a lil research on em, and make sure to always grab em Saving something thats no longer made, and gettin a little extra money to put back into the car along with. Also, some companies buy and re use working 70s-90s era Cassette tape players as hardware of that quality is simply not made anymore. So they'll buy old, bring it back with some tlc, and repackage it as a new product. So make sure to keep those as well.
I mean do what ya do lmao, just tapes. But after ya find a bunch if you get a good stack of stuff, I mean hell could be a quick $1,000 from just pulling shit out of old cars and throwing it online
I was horrified when he threw it in the trash. I know he is young, but he has a lot of old cars. He must know that tape players were very common and are useful today. And a sealed high quality tape like that is a major score. I'd be recording cruising around music on it. Or having his grandpa do it.
So cool to see it Saturday. Loved the gaa tank setup. Thanks for spending time talking, enjoyed meeting you. Remember to hire this old fat engineer when 909 Speed Shop hits big time.
I'm on board with that idea. 909 Speed Shop in B'Ham AL, I'm on the floor or behind the counter helping out. Retired old gear head has to have something to do.
If I'm not mistaking, I think those generation Ford F-series pickups were the first Fords to have a crew cab. Those are the fifth generation F-series & they were produced from 1967 - 1972.
Looks Awesome! You keep the White wagon wheels that were on it? Could always put Center wheel covers on the White steel wheels! The paint might even polish up and shine! Washing the 20+ years of dirt off made it look 110% better! Glad To see you got it running and driving again! Rare awesome curecab F250 with 390 big block and 4 on the floor and heavy duty Dana 60 rearend! Power brakes and Air conditioning very nice opitions! Can't wait To see more vidéos on it! Take care.
Hi Soddy, The alternator and the multimeter color red No brand. It's worth a try to get to read the 14 voltages from the volt meter display. If the alternator and the battery reads with the lead points touching the battery posts x 2, It could be bad or high as 25 volts or higher. Check for a price of the Alternator in O'Reilly. The price comes from Rebuild at Parts Geek for only Remy-Delco remanufactured at a price range between $67.55 US dollars up to $110.00 plus return the core charge and no money back. So throw it away and ask the O' Reilly to keep a box and don't ask for money at the O'Reilly. O'Reilly can moth ball some of the recycle/salvageable the parts including old alternator into long gone. You have two choice Parts Geek or the other? There is a yoke for holding the bottom of the solid case alternator over there under your hood of the F250 truck and you'll see the long hinge and short hinge that bracket up the alternator. Overall, you saw just one alternator or a new one per truck pick up. The Chrysler alternator for AG long truck Four seater pick up F250 is a caged case alternator that shall fit into the mount of the Ford rusted truck. It depends on similar to the stock alternator comparation. Bye.
I know its been a while since you posted this, but I work as a boat pilot, that placard you found is actually still valid and the rule for dumping at sea.
A Craftsman wrench, originally "back in the day" if you wore out a Craftsman tool you could take it to a Sears store and trade it for a new one. I watched my dad several times back on the 70s swap out tools my grandfather purchased back in the 30s. They were great tools and my grandfather and father used their tools daily and it took a lot of wear and tare to wear them out.I still have all those tools and my dad's upright tool chest that holds them 😀
I took my 20 year old Craftsman ratchet there and the 20 year old sales girl took it apart, cleaned out the gunk, and put it back together. Then it worked fine again. The ratchet has lasted another 20 years. It probably needs to be cleaned again though.
I love watching new racers. Nerves and mistakes then something clicks. I used to offer my entry level stock car to all non-racers, free. It wasn't fast but it was safe. It was never damaged but such an eye opener for beginners.
Well Done Craig!!!! That would be so satisfying to me to power wash that and get that just Classic Paint back!!!!!! Also just to be able to see out the windshiled.....INCREDIBLE!
GREAT VIDEO @Thecraig909 I Love these old bump sides and especially the crew cabs, just something you don't see everyday!! Can't wait to see the next video as well as what the future holds for your new bump! Keep up the Great Work!!
I got to admit that is one hell of an awesome old Ford. Tiny world moment my truck aka "the spud truck" has the same two tone colors a 89 F150 Lariat (ex cab long bed) saved after sitting for 10 years at a Idaho potato farm parked because the rear diff suffered from hands-free disassembly.
Great vid! I think the seat back rear cover might just unscrew and swap over so that you can cover the springs on the "new" front seat. Not 100% sure, but worth a try.
Any wheat penny is worth at least 4 cents to most dealers. Given the popularity of collecting Lincoln Wheat cents, there will always be a demand for quality coins. Therefore, collect coins in the highest grade that you can afford.
As much dirt in and under that carpet you might be better served to rip it out and get home depots cheapest indoor / outdoor and call it Sanitized/fresh. Seat covers looked salvageable. A good cleaning add 5 hp to any auto. Really good project guys.
I work on ships as a welder and THAT PLAQUE FOR DUMPING IS STILL IN USE!!!! I see it all the time on fishing vessels, tug boats, large dredges and I'm pretty sure I've seen it on a coast guard ice cutter.
@@MaxGiganteum True those conditions can cause that. I watched a former Fed Exp mechanic that owned nothing but Ford autos n trucks. One of his daughters lost keys to her car. He popped in a new ignition switch went to a drawer with a few old Ford keys in it. Put one in giggled it a little vroom. Turned right over.
Fantastic satisfaction just watching the progress of the video. Sure appreciate the efforts you put into these for our entertainment. Can Not wait for the next one either. Such a cliff hanger! Love this Rig! Great project! Great friends too!
Well for an old 1969 truck it does run pretty well after a minimum of replacement parts. The seat covers are those old saddle blanket seat covers I used to have those same ones on my 1989 lol. Oh and by the way Craig i subscribed to your channel so I can see what else you do to this truck and how it fairs at Holley Ford fest. You are right about those plastic liners first thing I pulled out of mine and luckily i had not rusted just painted to make sure and it has a solid steel bed. Good idea pulling the dash pad off too. Mine in my 89 f150 doesn't have any cracks in it and it sits outside in the hot Nevada Sun every day.
Why would you suck up penny's I learned a long time ago only an idiot would throw away money regardless of the amount sorry but if you saved what was in every car you have and will do I bet its more than you think
There's just something about power washing the moss off of an old vehicle that's so satisfying. That truck is beautiful. Even with the whiskey wrinkle in the rear passenger door. Lol I would daily this thing.
Good luck with build. Restored a 69 so definitely enjoying the videos. Like seeing the progress including the cleaning... but less yacking and more repairs! Order up the new parts and start thrashing on it!
Hello Craig with the crew cab trucking into bumper car speed not fast enough. The box in within the bump type sheet metal bed floor. Surburban roof less truck pickup hard head roof but the Surburban with your teardrop camper called trailer or just concrete floor is all you have. The teardrop camper two wheel is in Nelson, Nevada. We don't go there in the Ghost town of Milling and mining site near Mead Lake Park. It is private property Memorabilia such as Double Cola old stuff plus 7 windows sedan Ford around 1930's Vintage scrap yard all good condition Minted car with not running engine called Nash sub-compact cars. It is not mine land property in Nelson property or town of the Nevada. The F350 with 351 CID or the transmission is bad? Thank you.
check those quarters, if any of them are 1964 and older they are 90% silver and currently worth $3 melt value 1964 and earlier dimes and half dollars were also 90% silver and 1965-1970 half dollars were 40% silver
@@MaxGiganteum Yeah. I even scrub up the filthy coins I find in my project cars. Throwing away money, even a penny or a dime seems wrong. And the copper in an old penny is worth way more than a penny so....
wow this truck turned out very NICE after a lil cleaning! i hav an OLD OLD car (1976 Lincoln Mark IV) she looks rather ROUGH cosmetically but i still hand wash her at home 2 x a week
That truck would be SO badass with a Black Widow dual exhaust. Also, with that bed cleaned out, it'd be cool to see it lined with Rhino Liner or something similar.
Don’t forget to pre-order your decals here! Thanks everyone. www.nineoninespeedcompany.com/collections/frontpage/products/soddy-decal-pre-order
I know you love the patina look but just imagine how satisfying it would be to make it look like it just came off the factory floor.
Was thinking this same thing while watching the washing part of the video. Would love to see this one completely redone.
That’s exactly how u have to explain it to the wife so that u can get a second one for that purpose 😉
Your right he likes “ patina “ but that truck would look so good repaired and painted like new condition!!!
Imagine the nerve racking anxiety of having a vintage truck that looks brand new, I’d say patina all day lol
@@ericalbertson6621 I would not you drive the truck ! On Saturday morning you wash the truck and drive it again ! That’s how it works
For the ignition on these trucks, yes you need the key in order to pull it out normally. However, you can actually just drill out the key tumbler, go to the parts store and get a new tumbler for the tuck and pop it in like normal. I had to do that with mine. Its pretty easy to do as well.
Guy I got my 78 truck from the reason he sold it didn't know how to put the tumbler in correctly and he put it in and it stayed in the start position and he drove it like that. Luckily the starter teeth were softer than the flywheel. I bought it without being able to start it. a $25 starter and installing the ignition cylinder correctly I've driven it like 5 years now. Lol
I really like the way Craig takes pride in cleaning up these old vehicles, and we must have close to the same taste as I love old Ford trucks, and fox body cars in general. I can't wait to see this done and put to work. Also hats off to Dylan for helping you guys out with the truck.
This is a fun watch. I am currently working on a 1965 F100 that has been off the road since at least 2004 and was left abandoned in the back yard of an acquaintance of mine. It has been one of the most exciting and frustrating thing I have ever done. I just finished a full engine rebuild on the old 300 inline 6, now I am on to rebuilding the 3 speed manual transmission. Still so much work to do but can see the end of it coming soon.
I have a 1990 F250 I'm fixing up (I have a video on my channel of it) but after watching these videos, kind of wish I went with a late 60s body style ford like you guys
I have a 1960 F350 thats been off the road since 78, $5k into it and it now runs and drives about $2k left for new engine
@@Wrenchingredneck I'm about 3k into mine so far. Most of it was from the machine work for the engine rebuild, and hunting down engine parts because the head on mine was cracked.
@@evasesh6585 I have about 1.5k into my engine rebuild and about the same on performance parts, like headers, aluminum rad ect.
Absolutely awesome truck. It’s extremely satisfying just putting some elbow grease in getting it to look like it’s former glory. Really like the collab with Dylan as well. Getting your frequent flyer miles built up this year!
after I graduated from high school (1977) I worked for our County HI way department; I remember that they had a similar truck sitting around. It wasn't used much, but I always thought that ought to be mass produced... forty + years later, now EVERYONE makes crew cabs and club cabs ... the one you have is a real treasure!!!
I can really relate to watching you guys doing your archeological dig through the cab - loved that part of the video. I have a 78 crew 4WD that was originally bought new by a local logging company based in Woodland, here in SW Washington State. They used it as a crummy and welded a tow bar bracket to the front of the frame. These trucks were produced in Windsor Canada (at least mine was) by altering a single cab, hence the propensity to rust in the drip rails. Not only are the bench seats identical, so is the side window glass. In fact the rear doors are essentially just front doors without wing windows. I think they also used van hinges instead.
In any case I cleared out the entire cab for a repaint, and my big surprise was finding two one-hundred dollar bills neatly folded and hidden under the factory rubber floor carpeting. They were printed in the early 1980's. I wish now I hadn't spent them, but at the time of my project that paid for all the paint.
and VGG spent how mmuch on a crew cab??? eat your heart out Derek LOL
Pull the carpet out, power wash it, then use your shop vac to extract the water. Take out the floor mat, then scrub the bare floor and bleach it. That will kill most of the smell.
Man I love that truck and I like the patina look You guys are having a blast and fixing up a pretty rare old Ford truck that's always exciting 🤠 Keep up the good work and long live the mullet✊
Being able to play Columbo and figure out the backstory is a huge plus in my book. Plus it doesn't look like it was abused at all. Not coddled. But not beat on.
Just pre ordered the sticker. Mint truck man. This week is when my first truck gets back on the road after 3 years. I’m so happy.
12:35 Just some input on old tapes, that tape will sell for some good money online like ebay. Probably $20-25 for every sealed Type II cassette, especially Maxell and TDK. Type III and Metal cassettes if you come into those, that gets into real money for what you're selling. Type II probably around $40, and metal tapes can sell upwards of $100-250 sealed. Make sure to keep an eye out for those, and don't just throw em away. Capable of great sound and they don't make em anymore. People buy up old tape stock like mad.
Even if you find used recorded tapes, but good tapes, just run them past an erase head and sell em for $10 less as used, they still sell.
Highly recommend anyone who does revivals on old cars where they come by these to do a lil research on em, and make sure to always grab em
Saving something thats no longer made, and gettin a little extra money to put back into the car along with.
Also, some companies buy and re use working 70s-90s era Cassette tape players as hardware of that quality is simply not made anymore. So they'll buy old, bring it back with some tlc, and repackage it as a new product. So make sure to keep those as well.
I mean do what ya do lmao, just tapes. But after ya find a bunch if you get a good stack of stuff, I mean hell could be a quick $1,000 from just pulling shit out of old cars and throwing it online
I was horrified when he threw it in the trash. I know he is young, but he has a lot of old cars. He must know that tape players were very common and are useful today. And a sealed high quality tape like that is a major score. I'd be recording cruising around music on it. Or having his grandpa do it.
I like the collaboration between the two channels, made me laugh you guys more than any UA-cam channel in a while, thank you🙂
You’re welcome!
@@Thecraig909 , what do you all plan on doing to the truck, out of curiosity?
Fantastic video, love the truck. I can see a beautiful picture now. This truck, an old school car hauler trailer with the Galaxy on it. Oh yes. 🤙🤙🤙
So cool to see it Saturday. Loved the gaa tank setup. Thanks for spending time talking, enjoyed meeting you. Remember to hire this old fat engineer when 909 Speed Shop hits big time.
I enjoyed talking with you too. Thank you for the support. And you’ll be first on the list!
I'm on board with that idea. 909 Speed Shop in B'Ham AL, I'm on the floor or behind the counter helping out. Retired old gear head has to have something to do.
If I'm not mistaking, I think those generation Ford F-series pickups were the first Fords to have a crew cab. Those are the fifth generation F-series & they were produced from 1967 - 1972.
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
Looks Awesome! You keep the White wagon wheels that were on it? Could always put Center wheel covers on the White steel wheels! The paint might even polish up and shine! Washing the 20+ years of dirt off made it look 110% better! Glad To see you got it running and driving again! Rare awesome curecab F250 with 390 big block and 4 on the floor and heavy duty Dana 60 rearend! Power brakes and Air conditioning very nice opitions! Can't wait To see more vidéos on it! Take care.
So freaking awesome man. Got one I'm fixing and just got another with a 460. Pretty stoked.
That truck is in pretty solid shape for the year and a pretty rare find. This truck definitely deserves some love.
Hi Soddy, The alternator and the multimeter color red No brand. It's worth a try to get to read the 14 voltages from the volt meter display. If the alternator and the battery reads with the lead points touching the battery posts x 2, It could be bad or high as 25 volts or higher. Check for a price of the Alternator in O'Reilly. The price comes from Rebuild at Parts Geek for only Remy-Delco remanufactured at a price range between $67.55 US dollars up to $110.00 plus return the core charge and no money back. So throw it away and ask the O' Reilly to keep a box and don't ask for money at the O'Reilly. O'Reilly can moth ball some of the recycle/salvageable the parts including old alternator into long gone. You have two choice Parts Geek or the other?
There is a yoke for holding the bottom of the solid case alternator over there under your hood of the F250 truck and you'll see the long hinge and short hinge that bracket up the alternator. Overall, you saw just one alternator or a new one per truck pick up.
The Chrysler alternator for AG long truck Four seater pick up F250 is a caged case alternator that shall fit into the mount of the Ford rusted truck. It depends on similar to the stock alternator comparation. Bye.
I know its been a while since you posted this, but I work as a boat pilot, that placard you found is actually still valid and the rule for dumping at sea.
Dylan video brought me here. The crew cab is night and day difference looks really nice. Just subscribed. Greetings from Silverstreet South Carolina.
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
A Craftsman wrench, originally "back in the day" if you wore out a Craftsman tool you could take it to a Sears store and trade it for a new one. I watched my dad several times back on the 70s swap out tools my grandfather purchased back in the 30s. They were great tools and my grandfather and father used their tools daily and it took a lot of wear and tare to wear them out.I still have all those tools and my dad's upright tool chest that holds them 😀
I took my 20 year old Craftsman ratchet there and the 20 year old sales girl took it apart, cleaned out the gunk, and put it back together. Then it worked fine again. The ratchet has lasted another 20 years. It probably needs to be cleaned again though.
Just a tip if you take the whole truck and spray it down with purple power it makes all that stuff spray right off with the pressure washer
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
I bought a lot of those cassettes for recording on my 4 track in the 90's...was a great time will miss it.
I love watching new racers. Nerves and mistakes then something clicks.
I used to offer my entry level stock car to all non-racers, free. It wasn't fast but it was safe. It was never damaged but such an eye opener for beginners.
Well Done Craig!!!! That would be so satisfying to me to power wash that and get that just Classic Paint back!!!!!! Also just to be able to see out the windshiled.....INCREDIBLE!
GREAT VIDEO @Thecraig909 I Love these old bump sides and especially the crew cabs, just something you don't see everyday!! Can't wait to see the next video as well as what the future holds for your new bump! Keep up the Great Work!!
I had an awesome time meeting you at Holley Ford fest, thank you
I got to admit that is one hell of an awesome old Ford. Tiny world moment my truck aka "the spud truck" has the same two tone colors a 89 F150 Lariat (ex cab long bed) saved after sitting for 10 years at a Idaho potato farm parked because the rear diff suffered from hands-free disassembly.
Great vid! I think the seat back rear cover might just unscrew and swap over so that you can cover the springs on the "new" front seat. Not 100% sure, but worth a try.
6:38 we said "oh yeah bud" at the exact same time
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
Great collaboration with Dylan team work makes the dream work
Any wheat penny is worth at least 4 cents to most dealers. Given the popularity of collecting Lincoln Wheat cents, there will always be a demand for quality coins. Therefore, collect coins in the highest grade that you can afford.
Here from Dylan's channel to see part 2 of the land train series!
Home Depot, that 1/8th or 1/4 inch fiber board could be used as a seat back, custom!
It's got the holder for a camper on yhe hood maybe the tubed the bed tryiing to put Dual wheels on it . For the weight those old campers where heavy.
As much dirt in and under that carpet you might be better served to rip it out and get home depots cheapest indoor / outdoor and call it Sanitized/fresh. Seat covers looked salvageable. A good cleaning add 5 hp to any auto. Really good project guys.
I really appreciate the knife hand off at @9:50 this guy cares
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
the way those bed tubs are cut you cant help but wonder if someone ran the truck as a dually for a while.
Thank you for your APPRECIATION to your subscribers!
The old headlight was an old school non-halogen setup that didn't have a small bulb inside the 7 inch glass casing.
I work on ships as a welder and THAT PLAQUE FOR DUMPING IS STILL IN USE!!!! I see it all the time on fishing vessels, tug boats, large dredges and I'm pretty sure I've seen it on a coast guard ice cutter.
The patina looks great. Truck came out amazing.
That really makes me feel old that you guys didn't know about the blank cassettes lol! Too funny!
Love this project , I know you're gonna turn this old girl into something special !
@22:54 don't forget to get your knob polished.
Awesome truck. A tip in the future. Most 70’s Ford’s if you have any square key. You can wiggle that key in the ignition and they “should” turn over.
@@MaxGiganteum
True those conditions can cause that. I watched a former Fed Exp mechanic that owned nothing but Ford autos n trucks. One of his daughters lost keys to her car. He popped in a new ignition switch went to a drawer with a few old Ford keys in it. Put one in giggled it a little vroom. Turned right over.
Nice 👌 what a faithful old truck she is, can't wait for the next episode 😀
Absolutely love that truck! Can not wait for the build on this truck
After watching so much Coldwarmotors, I can only think of cigarettes when I hear darts.
It needs a stereo and some sound insulation in the back of the cab.
Good job bringing another old truck back to life! Good content keep em coming
Awesome crew cab bump
Leave the patina! Just clear coat it over and if anything, restomod it.
Patina cars are hot now!
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
Looks amazing, reminds me of when I pressure washed my 71 crewcab highboy a few months back.
i collect coins to lol, got a bunch of em, also have some mercury head dimes to an silver quarters and dimes
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
I just realized how important lighting is for a power washing video. And how hard it is to actually capture
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
Loving the CC content!
I’ve seen you in the background of others like Ford Era, glad I found this new issue 👍🏼
This is the truck i have always wanted, bump side 4 door, but in 4x4. F250. Had a 71 f250 that i got for free, when i was younger. Dang i miss it.
The two of you guys together is hilarious ! fantastic video!!!!!
nothing like three grown men, some sparklers from the 80s, and a nasty old truck
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
Love them old trucks. Open the hood and just so simple to work on. Now u look at these newer trucks and its like!!!!!😥😥😥😵😵😵
Fantastic satisfaction just watching the progress of the video. Sure appreciate the efforts you put into these for our entertainment. Can Not wait for the next one either. Such a cliff hanger! Love this Rig! Great project! Great friends too!
It was awesome running into y'all at Walmart, really awesome experience !
That truck is such a BEAUTY!!
You did about 3 weeks of work on that thing in 3 days? 2 days? Take a Nap!😮😂👍
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
Well for an old 1969 truck it does run pretty well after a minimum of replacement parts. The seat covers are those old saddle blanket seat covers I used to have those same ones on my 1989 lol. Oh and by the way Craig i subscribed to your channel so I can see what else you do to this truck and how it fairs at Holley Ford fest. You are right about those plastic liners first thing I pulled out of mine and luckily i had not rusted just painted to make sure and it has a solid steel bed. Good idea pulling the dash pad off too. Mine in my 89 f150 doesn't have any cracks in it and it sits outside in the hot Nevada Sun every day.
you should've sprayed the truck down with purple power or simple green and it would've just rinsed off for the most part
Why would you suck up penny's I learned a long time ago only an idiot would throw away money regardless of the amount sorry but if you saved what was in every car you have and will do I bet its more than you think
This is like watching Ed, Edd, Eddy in real life. Lol. I'm glad that old ford is getting the love it deserves! Mint!
That's quite a sporty looking truck
I love your vids. Yours and 4 Speed Film’s are some of my faves on YT
Be sure to look in the pocket in the front of the seat covers. Lots of goodies slip into those.
There's just something about power washing the moss off of an old vehicle that's so satisfying. That truck is beautiful. Even with the whiskey wrinkle in the rear passenger door. Lol I would daily this thing.
Good luck with build. Restored a 69 so definitely enjoying the videos. Like seeing the progress including the cleaning... but less yacking and more repairs! Order up the new parts and start thrashing on it!
Great to see you and Dylan working together. Also happy to see Marty there with you, maybe someday you can get your own shop.
Like the wash and the start and workmanship
Hello Craig with the crew cab trucking into bumper car speed not fast enough. The box in within the bump type sheet metal bed floor. Surburban roof less truck pickup hard head roof but the Surburban with your teardrop camper called trailer or just concrete floor is all you have. The teardrop camper two wheel is in Nelson, Nevada. We don't go there in the Ghost town of Milling and mining site near Mead Lake Park. It is private property Memorabilia such as Double Cola old stuff plus 7 windows sedan Ford around 1930's Vintage scrap yard all good condition Minted car with not running engine called Nash sub-compact cars. It is not mine land property in Nelson property or town of the Nevada.
The F350 with 351 CID or the transmission is bad? Thank you.
check those quarters, if any of them are 1964 and older they are 90% silver and currently worth $3 melt value
1964 and earlier dimes and half dollars were also 90% silver and 1965-1970 half dollars were 40% silver
@@MaxGiganteum Yeah. I even scrub up the filthy coins I find in my project cars. Throwing away money, even a penny or a dime seems wrong. And the copper in an old penny is worth way more than a penny so....
Love how you posted the same time with Dylan lol
Looking forward to the next iteration of the resurrection.
wow this truck turned out very NICE after a lil cleaning! i hav an OLD OLD car (1976 Lincoln Mark IV) she looks rather ROUGH cosmetically but i still hand wash her at home 2 x a week
What company did you use for the headlights?
New to the channel but if Mccool here it’s got to be good. Good luck boys
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
That truck would be SO badass with a Black Widow dual exhaust. Also, with that bed cleaned out, it'd be cool to see it lined with Rhino Liner or something similar.
Loveing the crew content
That front seat back should just un-screw.✌
Let’s recap. You found gloves, children’s suntan lotion, and a huge knife. Does anyone find that creepy?
nice dirt dauber nests. i am glad i dont have those buggers up here in canada.
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆
Can't wait to see this towing the f100 and the fox body
That bed is bouncing around.
I would go back with a doeskin and burgundy color. Awesome truck! Seats row pleated with leather. Cheap leather on ebay
I'm here from Dylan's video with this truck. Better late than never.
Cool video. Is that Mike Finnegan's Death Metal Charger in your garage?
Can't wait for the next video on the crew cab pretty nice truck. Knock that Dent out of that right rear door.
TREMENDA DOBLE CABINA MI HNO UNA NAVE ESA FORD 100
Thanks for watching, you been selected among my giveaway winners 🎁🎁🎁 message me now to claim your price. ☝️ ☝️ 👆👆