Poison Spyder Bruiser Bumper Review & Install
Вставка
- Опубліковано 5 вер 2024
- I finally got rid of my faded banged up plastic bumpers and upgraded to the new released Poison Spyder Bruiser front and rear bumpers. I’m going to give you a detailed look and show you how the install went.
Poison Spyder Bruiser Bumper:
Front: bit.ly/PSfont
Rear: bit.ly/PSRearbu...
KC G-34: amzn.to/2OnMUh8
Factor 55 Flatlink: amzn.to/2Qdz8eo
🌐 TRAILRECON.COM 🌐
trailrecon.com
Check out our website if you’re looking for off-road or overland gear and equipment for your next rig and your next off-the-grid adventure. We have everything you need, including recovery gear, tents, cooking and kitchen gear, sleeping bags, TrailRecon clothes and stickers, and a lot more.
If you’re interested in reading in-depth articles about the places we go, products we use, and our personal insights about overlanding, you’ll want to check out our blog.
trailrecon.com...
********************
📲 SOCIAL MEDIA LINKS 📲
Facebook: trailrecon
Instagram: trailrecon
Disclaimer:
TrailRecon assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Due to factors beyond the control of TrailRecon, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TrailRecon. This video is solely for entertainment purposes only.
Ha, I was wondering if the sway bar was going to be angled due to the vacuum pump relocation bracket. That's awesome that they include that little plate to level it out, good job PSC!!!!
Added the same bumpers, love them. On the back we added the rigid lights with the red back light and hooked that up to the brake lights. So we have the white connected to the backup, and the red to brake lights. Looks great!
I've been patiently waiting for this front bumper since I saw it at SEMA. Looks great!
I'm with you, when I saw them at SEMA and then on Iron Man's Jeep, I know this was the bumper for me. I'm excited to start seeing these on many other Jeeps soon!
Miss these kinds of videos
I think you just help me make my mind up about bumpers. I’ve been looking for awhile. Thank you Brad!!!
Right on! These are a great choice!
The recessed winch is so nice. I have a different bumper, but that is the exact reason I bought the bumper I have, so that I would get good clearance for the air to the radiator. Jeep looks awesome dude, nice work!
What size of cube lights that bumper need it ?
3" cube lights will fit.
Great looking bumpers and a great video as always. 👍 I currwntly have their brawler light front and rear bumpers with a tire carrier and their quality is superb. I'm sure you won't be disappointed. Keep on jeepin'
PS has been making quaintly stuff for a while now and I don't think I've every heard anyone say they were disappointed with their gear. Thank!
Love how those G34’s fit !! These upgrades totally changed the looks of your Jeep!
Good looking bumpers. That's what I'm putting on my 2016 Jeep JKU. the clean look of the winch sold me.
The bumpers look great! The overall look is awesome. Thanks for sharing.
Looks real nice. Big fan of Poison Spyder and factor 55. Your setup looks correct now. No directions, well you conquered it...good job. I ain't gonna lie I'd be lost.
Thanks! I had to take a few minutes here and there just to figure things out as I was going along. Not having instructions keeps you thinking!
great realistic install! great job, and thanks for sharing. Good to know waiting till last to install the winch! Great looking bumpers!
That is a good looking bumper Brad. I'll add it to my list of contenders. Looking to get a bumper soon.
I’m not usually the biggest fan of these poison spyder bumpers but I gotta say these really look nice on your jeep! 👍
Thanks, I'm very happy with how it all turned out!
I have the poison spyder brawler lite front bumper and love it. Solid.
I love the gradual build on this and hey....at least the jack made lifting the rear bumper into place. :) Looks amazing!!!
Wow those bumpers made a big difference in the look of your Jeep, looks great!!! Can't wait to see the new fenders. 👍
So glad to be rid of the plastic! Thank you! Fenders soon!
You've done a terrific job with your rig. hat kind of fenders are you getting?
Great video. I like that you left in your errors for all to see, because I probably would've committed the same errors.
I don't think I've ever done and install that went perfectly, so keeping it real I think is important for first time DIY folks.
I just put that same rear bumper on my JK. The instructions are awful and I couldn't find a good color PDF anywhere,. Fortunately I watched your video beforehand so I knew the process. Thanks!
I have a Poison Spyder brawler lite front bumper and its great.. but I am really jealous of the low profile winch mount. Looks good!
Looks awesome! The bumpers really look well made. Nice install video. I really like your honesty about products and the issues you share during your installs. Your rig is looking amazing!
Thanks you! I imagine if I would have had the instruction it would have been much, much simpler... but who need instructions!!!
Nice job goin with the Poison Spyder bumper, I have their Brawler Lite and they really knock it outta the park when it comes to build quality. The one and only gripe I have (if you can even call it one) is their powder coating isn't really too good it begins to chip off and it stains easily too, but nothing a coat of black spray paint can't fix. The bumpers can take a REAL beating tho, I've taken down small trees no problem and recovered people with no evidence at all left behind on the bumper. Truly worth the money.
Well I hope I don't have to take down any small trees, but looking forward to the durability of these. Thank you!
I order my bare steel and painted my self. It’s crazy they charge around $120 for their coating lol
Arckiz I think when I ordered mine they had a special offer where the coating was discounted or free (I think heavily discounted). Definitely going to strip down and repaint it soon tho.
Alvin Rohani nice! I did gave them a call about an item and ended getting free shipping lol
Plasti dip the chrome Jeep emblem black. It would make the front of your rig way cooler!
Good job man!!! It's always a fly by wire with Jeeps, JMIW, Just Make It Work! I like the bumpers a lot, how about a subscriber discount?!?!?!?!?!? Thanks again man! Keep on Jeep'n well!!!
You can use the code TRAILRECON on Northridge4x4's website and get discounts on many of their items (doesn't work for everything).
Nice bumper I like the winch is tucked away... on a non related note I seen your rig in a 4wheel parts magazine for a KC advertisement, pretty cool seeing your rig in there. Have a great Easter bud.
Thanks, I was pretty exited about the ad! Happy Easter to you as well!
Nice job on the install and dealing with some of the obstacles that came up. Its a good looking set of bumpers - I wonder if PS will offer a version with round fog light openings or possibly a round adapter plate.
Thanks! That's a good question regarding the round light option, I hope so as I think there are lots of folks that would prefer that.
I am in the process of installing my bruiser bumper with g34 as well. However,either the supplied bolt in the KC g34 are too big or poison Spyder changed the size of the mounting holes.
Also recommend replacing the button head with real bolts on the vacuum pump relocation bracket. I some how managed to bend and break one of the supplied button heads,lol. No big deal, hardware store to the rescue......
Also if you use a warn zeon winch you'll need to cut off the forward piece of OEM vacuum pump bracket. I cut the winch mount like in the video and I still needed to cut the factory bracket. Anyway,just a little id like to add to this great video and review. Thanks Trailrecon!
Hello: Looks like they thought of everything.. I think the Bull Bar sticks out further than I want...
This bumper on your Jeep is totally awesome! Nice work! I love it!!!
Bumpers look nice.
I would suggest doing an upgrade on the cargo door hinges. Those dv8 offroad hinges are amazing.
Already done... just did it the morning!
Great look! I want the Trail stinger with this recessed wench style. Awesome install with no instructions.
Look Good Brad. Good Job
Install looks very clean and fits the JK very well!
Thanks!
Very nice Brad! Clean lines, well built, SOLID! I’m wondering if Poison Spyder is considering doing the same bumper to accommodate KC Gravity Pro fog light? Don’t want to give up my KC Gravity Pro setup I got going on 🤗
It looks great I have a Poison Spyder bumper and I love it. Very good stuff reasonably priced.
Curious about the prices but I guess that's undecided. Both bumpers look fantastic and you figured it out pretty well.
That's awesome Brad!!! You look like a kid on Xmas happy!! Congrats!! Love the look. Can't wait to see the fender flares installed..
LOL! Ya, pretty happy for sure! Thanks!
Hey Brad, doing this exact time install, quick question. I'm trying to put KC g34 lights in bumper and bolt on pod doesn't fit through poison Spyder bracket. Did you replace bolt or drill out slot on bumper??? What was your method? Was hoping it would have just bolted right up.
that looks more trail ready now...
your headlights are awesome.
Great choice on the bumpers! I’ve been very happy with my Crawler Conceptz bumpers, but the look of these might have me swapping them out if I were farther along in my build.
Excellent channel. And my favorite front bumper. Keep up the good work
Hi Brad, I love your channel and have learned a lot. I bought the same bumper and the G34 KC lights like you did here. Did you have to modify anything to get the lights to fit? I cant get the bumper all the way on with the lights installed. I may need to find a smaller light. Any suggestions would be much apppreciated.
Following
Poison Spider good choice Brad! like it a lot.
Right on!
Probably would have chopped off that vacuum pump bracket. Factory hard rock bumpers have the same problem when installing a winch plate, mopar suggests bracket removal.. Honestly a horrible place for that pump to begin with! Either way the bumpers look AMAZING! Long time coming!
rig is coming along man! Keep up the good work
Thank you!
I'm really surprised it does not require any cutting. looks great.
A little cutting with that vacuum pump bracket, but that is all.
Did the kc light plug straight in to where the factory fog lights did or did you have to splice the
wires?
answered below
I really like the looks of both, though I’ve seen some bad reviews of the rear bumper and for the possible future of camping with my Jeep I’m probably going to go with the LoD rear bumper and tire carrier for its additions such as fuel cans and other attachments. Awesome video!
Nice! keep waiting to see them come out with the JL
I know they are working on JL bumpers and I can't wait to see what they come up with.
Isn’t there a front skid plate as well? Looks great I like these and don’t want to relocate my license plate/lose my rear tire
Very clean, professional look
Thanks Brad, just installed mine 👌 is there a space for a high lift jack anywhere?
I love this bumper! And one day my JK will be wearing it!
I think it's will be a nice additions to your Jeep!
Great result!😀
'Brad....when are you gonna mount a winch on that nice, new bumper??? Just kidding. I know..Calm down .
Looks great! 👍⭐🏆
HAHA! You know, it might be an inexpensive winch and except for a broken connector pin I had to replace, it's served me well over the last 3 years. I have pulled myself and several others out of tough spots many a time with this guy..... but a Warn would be nice!
You need to hit up Arcteryx for some clothing/jackets/gear....
Looks good! I am looking for something with a better approach angle to replace my LOD in the future but most of them I see do not have the recessed winch that I want. So if this is offered with round light holes to accept a factory style light I may be a buyer!
Videos are great thx, Do you have one on how to cut your fenders. I know there are others out there but you do such a great job of how to’s and so on
Honestly, I watch RockTroopers video on how to cut fenders... I didn't have time to film a video when I did mine and his is very detailed.
Your Jeep is coming together nicely now, I like the new clean front it look so much better now. I would suggest getting the skid plate for the bottom, it will hide and protect that vacuum pump, protect the steering track bars and it will improve the look even more.
Do you know and keep track of the cost of all the accessories and upgrades?
THanks! The skid plate is on my to-do list. I don't keep track...not sure I wan to know, LOL!
Once again great video! I will be ordering these soon so hopefully i will find a black Friday or Cyber Monday sale.
Thanks! I hope you are able to find a great deal!
Looks great! I have the original version of the brawler I really like the recessed winch I might have to sell mine and get a new one.
As always another good informative video, thanks again!
Man great work keep it up!! One thing I like about you is how perfectionist you are , just like me keep it up !
I have a little OCD... :)
Hate the vacuum pump relocation bracket, I have the older model of the same bar (without the recessed winch plate). Why not relocate the vac pump into the engine bay and shorten the hoses? I think Teraflex sell a relocation kit.
Good video bro. Looking good. Those fenders are going to compliment it nicely.
Thank!
You have one of the best intro's
Appreciate that, thank you!
Looks awesome ... I bet the "poison spyder" price is scary though. Watching that install made me wonder if the winch mount could be used on with other bumpers if you were willing to do a little cutting and grinding?? Nicely done as always Brad.
Thanks! I'm sure if someone is motivated to do some cutting and grinding and even a little welding, they could surely make it work.
Looks awesome! Do you happen to have a measurement for the size of the fog light openings?
Awesome video as usual!!👍🏻👍🏻
Thank you sir!
So you know where that bar is that has a 45 degree angle at the bottom of the bumper? I bit the bullet and got 2 more cyclone lights, it gives a nice coverage of lighting for your under carriage camera for night riding. You'll need larger washers you probably have in your misc items. I mention this because this is something you talked about doing in your cyclone light setup ;)
That's a great suggestions... I'm going to have to get a couple more cyclones! Thank you!
TrailRecon np, if you get the kit that you got similar to your engine bay lights, you'll end up cutting the loom to make it shorter between lights, it's a super easy run obviously from there to your spod/Apollo. I know 6 lights then getting 2 more is a stretch but you'll be glad you did it haha.. Thx for this VID, I've been looking for a shorty bumper to replace the barricade.
This bumper would be perfect if it had round lights and a trail stinger option
Awesome except one thing. I dislike when manufacturers laser cut their logo into their parts. That front bumper has a very nice style to it. I especially like how the front hoop meets the bumper right on the corner where it’s strongest, good detail.
I'm also not a big fan of manufactures putting their logo in places that takes away from the design of the product, but I think the spider is subtle and king of cool so I'm okay with it.
Didn't have a 1/2" bit? I thought you had step bits. Looks dang fine either way.
the floor jack part lol sry but it was pretty funny XD least you saved your back from heavy liftin :P
Why mix square lights with round lights ?
Nice job B-Rad.....
Can you put the winch support link?
Is there any video showing how you regear or calibrate the speedo meter after installing big tyres?
Great video in detail!! Just a question... How would the factory airbags work with your front bumper?
That's a good question and something I'll have to look into a little deeper. I'm not sure where the sensor is located, but I'll find out.
How did this hold up and how is the brand now?
So nice.
My poison spyder fairlead bolts don’t fit through the bumper holes
Did the kc fog lights plug into the stock harness? Do you still pull the turn sign to turn the fog lights on and off? I'm looking to get this bumper really soon. Love the channel
Bumpers look amazing I would modify them and put lights on each end for the side views. What year is your jeep
I may slap some rock lights on the edges, we'll see. Jeep is a 2105. Thanks!
Great video and awesome looking bumpers! What do you think the weight difference is over stock? Thanks again for your work with these videos - I feel like I’m learning right along with you. 👍
Thank you! I didn't weigh the bumpers, but they are 3/16" vs the stock plastic, so I just added 70-100lbs total to my Jeep if I was to guess.
Like the bumpers.
Do you think the AEV rear tire carried match with your rear bumper?
Looks great! I am dreaming and researching for now, so I can live vicariously through you and a few others. My only thought on these, is that I really like the jack points that are on the Smittybuilt bumpers.
Do you think you may take advantage of the modular tire carrier on that?
I just upgraded my tailgate hinges today, so need to see if the PS tire carrier will still work... these new hinges are bulky. Thanks!
Sweet bumpers man!!! Love the new look & looks like it added more ground clearance! Hey by the way I was wondering if by chance you're selling any trail recon decals?
Thanks! I hope to get some new decals made and up on the website soon!
TrailRecon sweet! I can't wait to hopefully buy one!! I'll keep an eye out on here and your website for them!
I was going to go with a Savvy stubby alloy bumper but you have given me a decision to make. That is one sharp bumper. Only considered Savvy because of the lightweight and strength. But this Poison Spyder looks very clean. Can you tell me what it weighs without the winch?
I actually was taking a close look at the Savvy a while back, but you have to do a lot of cutting and they was a turn off for me. Sorry, I didn't weigh them, but hopefully they will have full specs available soon.
TrailRecon Plus the Savvy is bare. I was planning on Line X'ing it. I'll ask Poison Spyder for the specs soon. Thx
Enjoyed the video and those bumpers have a really nice look. Is there no provision for mounting a front license plate?
There is a winch fairlead license plate contraption I have seen a few folks use, there are some options out there.
Do you plan to tow anything? Very few bumpers are tow rated, even though they have the hitch. Just curious, as I'd like to run the similar setup.
Hey Brad, where can I buy a pry bar for the Christmas Tree plastic plug clips?
Are you still running the stock tire carrier? I can't imagine it holding up to the amount of wheeling you do sir.
Nope, I upgraded to a Teraflex tire carrier.
@@TrailRecon After a year how is the Teraflex tire carrier holding up? I'm getting ready to order one. Thanks
That's a great look! Thanks for sharing.
I’ve just recently spent $3k in my 2k16 jku. Jeez!, Jeep gonna bankrupt me 😆#jeepthing I bought both lite poison spider bumper(back&front) Westin snyper fender kit, teraflex hinged, both jw speaker lights(tail&headlight). Now I need to upgrade my 33 to 35 👌 it already have a 2.5 teraflex lift so no worry there for now 😎 btw everything came on same day so I install all parts by my self in 2 days. I’m a do it ur self guy 👽 dope rig by the way!
Sound like you've been very busy and have one heck of a build going on! DIY is the best way to go!
3k is just the tip of the ice berg!
Casey_250 yea lol
Brad, what is the make model and size of your wheels? Are you happy with them?
Hey Brad, does the poison spyder bruiser bumper for the jl require a winch plate or does it mount directly to the bumper?
Hello , what’s the tow capacity on your new poison Spyder rear bumper ? I’m interested in getting one of those trailer campers so I wanted to know if that poison Spyder would pull that with ease
Is this the mid size one. I see they have 2 available and there website does not give good photos