@ 4:45 I get no errors and it just goes to 3d without the circle. If I go to edit again the circle is there. Tried it a dozen times exactly how you did it on the points. Tried trimming a few times, but forgot the middle line. Wew... finally done. Fixed that also under options->messaging->show what's wrong for every rebuild was unchecked.
@@hbgamers3008 It's been a while and I've done about a two hundred since that one that I'm not sure what I was talking about. I think going back to the point in video if I remember it was just the center line in the circle/part of the square that I wasn't deleting. I do these with the volume off so I miss things sometime. These video's are old, he never even years ago replied to people it looks like. I was trying to get an answer from anyone out there and it looks like I might have to be that person lol. I also don't like that on a lot of video's he gets things wrong himself or just clicks the fully define sketch, when as teaching beginners gives them an easy way out? Should never do that and figure out the problem yourself. Wish we had a way to chat. I wouldn't mind helping get through some of the problems that I basically was going through a few months ago. I can say what I've learned and try to help. I pretty much am at the point of doing the beginner one's before he does, then I watch the video to see how he did it.
i got problem in error solving steps when i finished the stop and repair command it was still showing a pop up error and I had tried that so many times ....
sir at 4:45 it is not showing any errors, when i create the circle it stays 2d instead of becoming 3d like yours. Edit: I have solved this problem, for some reason it worked when i deleted the old model and created a new one.
At 4:41, i've tried to sketch the circle for many times n do exactly they way you teach but its still got error?? I've already draw the circle starting on the midpoint but when i tried to cut the circle, its still hv a little bit of the line at the end of the rectangular point which make it error each time i try to exit sketch.. The thing is i hv already put the dimesion on every line of that rectangular but still got the error after sketch the circle.. Pls help me 😢
Video has explained all the important basic points perfectly.
Thank you 😊❤️
one of the best video available explaining all the necessary information for the beginners. thanks for making this kind of content
Man I am starting for my university's formula team and your videos are very helpful!
Thanks 😊 It means a lot.
Perfect. I'm used to working with rhino.....but this is fantastic. Thank you sir, for the lovely tutorials.🙏🏼
You are very welcome
also coming from rhino nice
I don't like solidworks, but I click every upload 😁😁
Thank you so much sir! These videos have helped me a lot. U have taught really well from beginner level to advanced.
Thank you for this video series, you are very generous to offer it for free
I m not Mechanical Engineer but i learn a lot, i can make small parts of the machine, Thank you Sir for uploading video.
गुरुर्ब्रह्मा गुरुर्विष्णुः गुरुर्देवो महेश्वरः 🙏जयगुरुदेव 🙏
Very Well Explained 🙏
Thanks
Your video for solidworks is remarkable . I enjoy it lot. Thank you sir
You're welcome 😊
@@CADCAMTutorials Hello Brother, can you help me to get a free version of Solidworls software? It is a request
Sir aap best ho mera sheet metal me laser cutting ka kaam hai
This guy is the BEST! ZER0 WASTed TIME; RIGHT TO THE POINT. Every DETAILED explained perfectly!
Thank you very much for your time to explain to us, I have learned a lot with the three videos that I have seen.
You're welcome 😊
i am learning through with you sir..
thank you sir teaching us in simple way..
Helllo Bhai. Can you help me to get a free version of solidworks software?
@@avinashtitarmare4695 bro i get solidwork from teacher they had help me..
I'm going to watch and like your all videos !
Thanks a lot brother.Take love.
@ 4:45 I get no errors and it just goes to 3d without the circle. If I go to edit again the circle is there. Tried it a dozen times exactly how you did it on the points. Tried trimming a few times, but forgot the middle line. Wew... finally done. Fixed that also under options->messaging->show what's wrong for every rebuild was unchecked.
which middle line ?? actually i am also getting the same issue .....and not able to resolve it.
@@hbgamers3008 It's been a while and I've done about a two hundred since that one that I'm not sure what I was talking about. I think going back to the point in video if I remember it was just the center line in the circle/part of the square that I wasn't deleting. I do these with the volume off so I miss things sometime. These video's are old, he never even years ago replied to people it looks like. I was trying to get an answer from anyone out there and it looks like I might have to be that person lol. I also don't like that on a lot of video's he gets things wrong himself or just clicks the fully define sketch, when as teaching beginners gives them an easy way out? Should never do that and figure out the problem yourself. Wish we had a way to chat. I wouldn't mind helping get through some of the problems that I basically was going through a few months ago. I can say what I've learned and try to help. I pretty much am at the point of doing the beginner one's before he does, then I watch the video to see how he did it.
Lot of thankyou sir
You're welcome 😊
Great Video. Thank you
Thank you so much sir
You're welcome 😊
Thank you for sharing your knowledge sirr🙏🙏🙏
You're welcome 😊
THANKYOU VERY MUCH
You're welcome 😊
Thank you sir, It helps a lot
You're welcome 😊
Thanks
You're welcome 😊
impressive
i love it
great videos thanks so much. to make a solid i have to fully define my sketch or it doesnt matter so much?
To make fully defined is important.
I can't thank you enough
How can you Exit the sketch even it is Undefined.. When I exit the sketch without dimensioning it shows under defined
Very Nicely Explained.. Thank you for your valuable time
You're welcome 😊
thank u sir
You are fantastic ! Thank you so much!!
You're welcome 😊
i got problem in error solving steps when i finished the stop and repair command it was still showing a pop up error and I had tried that so many times ....
sir at 4:45 it is not showing any errors, when i create the circle it stays 2d instead of becoming 3d like yours.
Edit:
I have solved this problem, for some reason it worked when i deleted the old model and created a new one.
At 4:41, i've tried to sketch the circle for many times n do exactly they way you teach but its still got error?? I've already draw the circle starting on the midpoint but when i tried to cut the circle, its still hv a little bit of the line at the end of the rectangular point which make it error each time i try to exit sketch.. The thing is i hv already put the dimesion on every line of that rectangular but still got the error after sketch the circle.. Pls help me 😢
do you got any solutions
i too have same problem
@sensationalwolf no i dont 😌
10:47 marking for myself
How you record the screen sir
missing "cut extruded" feature help
Bro, I am facing problem even though i am selecting Marge result my Boss extrude 1& 2 is not getting marge!
What can i do?
Go see the 3rd video and you will find your solution
@@STM_MOHAMED bro. It's been long while i solved it by myself.