SolidWorks tutorial | Design And Assembly of Ball Bearing in SolidWorks | SolidWorks

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 668

  • @darrenrobin7555
    @darrenrobin7555 7 років тому +101

    When a full tutorial on making something teaches you way faster than a "Step-by-step" tutorial about Solidworks. Thanks a lot! You saved so much of my time learning the fundamentals.

  • @fernandotobias9707
    @fernandotobias9707 10 місяців тому +3

    This was the first Solidworks tutorial I saw. I will remember it for ever ❤

  • @davidelliot9884
    @davidelliot9884 5 років тому +36

    Your tutorials are really speeding up my Solidworks learning. Many thanks!

  • @HemaratneGamage
    @HemaratneGamage Рік тому +4

    Marvellous. Now my Knowledge is improved to a certain level on this subject. Thank You Sir. Good Luck

  • @Shafayat-xz9jo
    @Shafayat-xz9jo 4 роки тому +6

    Thank you sir. I successfully made a ball bearing with my chosen measurement by following your tutorial.

  • @bardiajavid6425
    @bardiajavid6425 4 роки тому +2

    I study mechanical engineering and I have to admit you are the best

  • @rodrigobriano1287
    @rodrigobriano1287 5 років тому +8

    Congratulations man!!! The best bearing’s construction video I have watched.

  • @u87626
    @u87626 4 роки тому +2

    Very slow that makes an ease for beginners... Excellently explained

  • @dharmesh776
    @dharmesh776 5 років тому +2

    Skilled Indian 😎

  • @shivamkumar-vl6nt
    @shivamkumar-vl6nt 3 роки тому +1

    Awsome sir sum up in 18 mint 🙏

  • @vladimircastanon9682
    @vladimircastanon9682 4 місяці тому +1

    Amazing video! I love how you walk through every. single. step. Explaining these steps is also really helpful to a beginner, thank you!

  • @AgorosoHansel
    @AgorosoHansel 2 роки тому +2

    Thanks a lot for the tutorial. I followed step by step, pausing the video when needed. I got a perfect result.

  • @rodblackler6789
    @rodblackler6789 3 роки тому +9

    You explain everything very clearly, you are a master, I enjoyed the tutorial, I learned a lot from this tutorial thank you

  • @rizwanali7491
    @rizwanali7491 2 роки тому +3

    We really enjoyed your effort just watched this video got exactly wht i was looking for

  • @memologic9298
    @memologic9298 2 роки тому +2

    Excellent servant, I have also symbolically placed the bearing design on the channel

  • @rahulsuhaskulkarni2294
    @rahulsuhaskulkarni2294 7 років тому +33

    For those using Solidworks 2012, and the ball is not able to mate with inner ring face, I found a solution. Go to Mates, select, ball 'top plane' and inner ring 'top plane' and give distance between both of them as 45 mm. It sure works! Thanks

  • @마메보이
    @마메보이 2 роки тому +2

    멋지십니다
    한수 잘 배웠습니다
    좋은 영상 감사합니다

  • @pinokiomil1712
    @pinokiomil1712 3 роки тому +1

    Thanks I love you brother ! All respect from Amgeria ! I'm already liked and subscribed !

  • @hadinarimani831
    @hadinarimani831 7 років тому +2

    thank you thank you thank you you solve my problem easier than any one else thank you and respect

  • @rajeshbhanu9946
    @rajeshbhanu9946 6 років тому +6

    really great , these is helpful to design training students

  • @thinking-monkey
    @thinking-monkey Рік тому +2

    Thank you for your excellent tutorials! This helps tremendously!

  • @ermdallauddinansari1948
    @ermdallauddinansari1948 3 роки тому +2

    Beautiful PROJECT sir

  • @akarshpatilhotte7381
    @akarshpatilhotte7381 3 роки тому +2

    thankyou so much sir I learnt it perfectly through your video

  • @shuaichen4483
    @shuaichen4483 8 років тому +8

    your methods are really great! Much simpler than mine!

  • @olegbaturin3122
    @olegbaturin3122 Рік тому +1

    Thanks a lot! Great tutorial!!!

  • @Hrithik_Crick_Videos
    @Hrithik_Crick_Videos 6 років тому +2

    Nicely explained sir

  • @letsracetogether8898
    @letsracetogether8898 4 роки тому +1

    Vera level bro hands of bro 👍👍👍

  • @ChauhanJiVlogs007
    @ChauhanJiVlogs007 4 роки тому +1

    Thanks sir... I learnt something today.

  • @ireidemarfernandescosta8158
    @ireidemarfernandescosta8158 Рік тому +1

    Dei valor 👍👏👏👏

  • @Virtualik
    @Virtualik 3 роки тому +3

    Спасибо. У меня всё получилось! Хороший учитель.

  • @tonyjones629
    @tonyjones629 5 років тому +3

    Sir, You are one of the best at Solidworks, Thank you, I used you video to learn and pass the Certification for Solidworks.

  • @n.manjunathmanju1742
    @n.manjunathmanju1742 6 років тому +3

    so nice and good very help to students all students watch this all video guide trainings technology thank you for guidance

  • @rahulsuhaskulkarni2294
    @rahulsuhaskulkarni2294 7 років тому +10

    Very simple and beautifully explained. Thanks so much.

  • @8kSarah
    @8kSarah 4 роки тому +4

    Awesome video! Thanks! Although I had some difficulty to fit the cage on the ball due to the wrong plane!!

  • @arschannel9000
    @arschannel9000 4 роки тому +2

    This is very helpful for me and thanks you to teach how to do step by steps.

  • @surajgururani9935
    @surajgururani9935 Рік тому

    Very helpful. Thanks sir.

  • @codesrhodes3757
    @codesrhodes3757 3 роки тому +2

    Very good work sir. Lots of efforts. Thanks you very much. Helps a lot in learning.

  • @Tr-ie6zy
    @Tr-ie6zy 2 роки тому +1

    I love, thanks
    Can you dsign Spherical roller bearing next time ? Im waite for it

  • @devenahir4622
    @devenahir4622 2 роки тому

    Thank you ♥️ Sir For This Assembly

  • @Abbu594
    @Abbu594 5 років тому +25

    God level skills

  • @dimkoengineering
    @dimkoengineering 5 років тому +2

    πολυ καλη δουλεια συνεχισε ετσι !!! CONGRATULATION!

  • @mrturboautomobiledesigneng1716
    @mrturboautomobiledesigneng1716 2 роки тому

    Lovely Job, perfect tutorial

  • @gopalakrishnandharmaraj1689
    @gopalakrishnandharmaraj1689 4 роки тому +2

    Bro really thank you for this video and how you are getting the dimension of the product

  • @emilyfogerty6438
    @emilyfogerty6438 5 років тому +19

    I was very confused until he made it go all the way around and then I was like WOOOAH! That's cool.

  • @belviashop5054
    @belviashop5054 3 роки тому +2

    Easy to follow for beginner thank you!

  • @juanjobadia4502
    @juanjobadia4502 4 роки тому +2

    Excellent video, you explain things very well..!! 👍👍

  • @ameramer4682
    @ameramer4682 8 років тому +20

    Very beautiful and painted professionally I hope that you provide us with information on the sheet metal Thank you teacher

  • @brxnsounds
    @brxnsounds 4 роки тому

    what can i do if the ball doesnt flip in the mating process with the inner ring? it just dont flip

  • @ghosalarghya
    @ghosalarghya 4 роки тому

    You are an artist

  • @siphilipe
    @siphilipe 6 років тому +1

    Without that background noise, it's a great job.

  • @ramakantpatil2011
    @ramakantpatil2011 6 років тому

    Superb Masterjiiiii

  • @nsolanoc.
    @nsolanoc. 5 років тому +3

    AWESOME!!! Your deserve a mention on the next release of SW.... Thnx 4 sharing this knowledge. Best regards!!!

  • @tarekmiah4739
    @tarekmiah4739 Рік тому +1

    Excellent

  • @Engineers_Web
    @Engineers_Web 3 роки тому +1

    Which is your default appearance...?
    It is awesome to look
    Please help me

  • @Sizifus
    @Sizifus 5 років тому +1

    Very nice, concise and efficient.

  • @vivektrada9155
    @vivektrada9155 5 років тому +1

    Really good knowledge of solid work

  • @getsuga1396
    @getsuga1396 7 років тому +7

    Very nice tutorial, thanks. I would like to ask why the centre line is so important. I have been making simple drawings and haven't really used centre lines

  • @muhammadalvrido889
    @muhammadalvrido889 3 роки тому +2

    I like your explanation brother, this is amazing. Good luck brother. I hope you are always blessed. Thanks a lot. :)

  • @sivaram4565
    @sivaram4565 5 років тому +3

    Sir amazing videos u have to done sir..thank u soo much and super voice base...

  • @lambsauce5445
    @lambsauce5445 3 роки тому +5

    By the way everyone, In true Bearing and Mechanical Engineering terms, the parts in which he referred to as rings are called races. Don't ask me why.

    • @dakotareid1566
      @dakotareid1566 2 роки тому +1

      Because that’s where the bearing race lol

  • @ng.huuminh
    @ng.huuminh 2 роки тому

    thank you very much. Its really useful

  • @roni490
    @roni490 4 роки тому +5

    It's good work but I think the balls should roll on the inner or outer part I mean the relation should be similar to gears
    Best regards

  • @Siddu78
    @Siddu78 6 років тому

    Nice tutorial send some moulding technologies

  • @baroroba123
    @baroroba123 6 років тому +3

    the way you used for cage for the ball bearing is brilliant.

  • @yeasinmahmudemon3087
    @yeasinmahmudemon3087 5 років тому +2

    I try for make it,plz pray for me....i was a attracted for cad and cam. ❤
    I love it,and enjoy it❤
    Thank you for yor Sharing ❤

  • @hasanimran9009
    @hasanimran9009 Рік тому +1

    i am facing problem in selecting centeral axis of cage in assembly??

  • @sidla6989
    @sidla6989 6 років тому +3

    thank you indian support :)

  • @md.imteyaz225
    @md.imteyaz225 6 років тому +3

    I love your way of explaining each and every step very clearly

  • @doubleoverheadcamshaft882
    @doubleoverheadcamshaft882 2 роки тому

    Nice. Thank you for this lesson. Very interesting

  • @Dinhokk
    @Dinhokk 7 років тому +2

    Hey, how are you doing? I'm still learning SW and your tutorials are so helpful. The best ones ever!!! Actually I'm trying to assembly this ball bearing but I'm having some troubles on positioning the ball upon tangent the inner ring, When I try to follow all steps you teaches, it doesn't work to me. I've ever tried of all ways to make it work and hadn't any success. The step which I'm talking about is on video up to 14'14'' until 14'20''. I have the version 2016 on my PC and when I click on flip mate the ball moves down instead of move up. I don't know more what to do. Would appreciate your helhp if possible. Thanks in advance

    • @Dinhokk
      @Dinhokk 7 років тому

      I did the same as the Rahul Suhas Kulkarni and it worked, but now I have another problem with the cage, I couldn't mate them using the steps from video but I aligned the cage and ball planes, after I mirrored the component but when I rotate, only the inner ring and the balls move, the cage is static at all. Any help?

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 років тому

      make relation between ball & cage, tangent & parallel plan mate.

  • @jaouadiiheb9112
    @jaouadiiheb9112 8 років тому +28

    really i appreciate this..thank you man and plz keep going on for others useful tutorials

  • @futurelemon4197
    @futurelemon4197 7 років тому +2

    man i was bored and i was looking for SW Videos since I was bored I might do something usefull, you're the best

  • @abhijais75
    @abhijais75 11 місяців тому +1

    sir kindly provide the 2D view of all parts including dimensions....

  • @FarazArastu
    @FarazArastu 7 років тому +13

    Thanks for posting! This was very helpful for a graduate project I'm working on!

  • @sathyam815
    @sathyam815 Рік тому +1

    excellent

  • @patriknemecsek9634
    @patriknemecsek9634 5 років тому +6

    You helped me a lot with theese tutorial, thank you!!

  • @kashifchishti3887
    @kashifchishti3887 4 роки тому +6

    I appreciate your work it’s very useful sir
    Kindly make a video on shaft structure containing (coupling, Bearing , bearing block , shaft , gear , key , sleeve , end cover and through cover )
    Looking forward to your new video 🙏🏼👍🏼👍🏼👍🏼👍🏼

  • @jasoneyes01
    @jasoneyes01 8 років тому +7

    Inspiring. Can you please make video on your Solidworks default settings?

  • @priyalohar1707
    @priyalohar1707 7 років тому +3

    Nice work , but you can save the time in making more axises then required but nice tutorial.

  • @EduardSidorov-i3f
    @EduardSidorov-i3f 2 роки тому +2

    Супер. Спасибо Вам за урок и объяснения.👍

  • @bishnusateli1690
    @bishnusateli1690 3 роки тому +1

    thanks a lot finally I made my 2nd perfect assembly. It took me 2 days to do this exactly.

  • @suzanmahmud208
    @suzanmahmud208 8 років тому +3

    Thank you very much. It's great example

  • @kellymoses4378
    @kellymoses4378 4 роки тому +1

    Thank you I learn a lot👍

  • @luffysan3972
    @luffysan3972 2 роки тому +2

    Thanks a lot man!this was amazing and saved me so much time for my project!

  • @saeesonawane5481
    @saeesonawane5481 3 роки тому

    Excellent Work Sir, Thank You 🧚‍♀️😊

  • @abbasi11889
    @abbasi11889 3 роки тому

    Really great 🥰🥰🥰🥰🥰🥰🥰

  • @HARLYZZCCC
    @HARLYZZCCC 8 років тому +1

    VERY NICE TUTURIAL!!

  • @jannahfirdaus6277
    @jannahfirdaus6277 4 роки тому

    Excellent Sir. !

  • @johnv341
    @johnv341 7 років тому +3

    I came upon your tutorials today. Excellent! Thank you!

  • @mwont
    @mwont 3 роки тому +2

    Awesome tutorial. thank you. Even though it is done in solidworks 2014, it works with version 2020.

  • @umarmughal1087
    @umarmughal1087 6 років тому +10

    Sir First of all, your tutorials are great and have helped me a lot. Secondly, do you have these sketches from where you extrude drawings like this or its just a plain guess to take the values. I am really looking forward to your approach on this comment. Thanks. Waiting

  • @cad_krenovaku
    @cad_krenovaku 7 років тому +2

    Very Good ur Design

  • @TheHyperrat
    @TheHyperrat 8 років тому +3

    Really usefull example. Thanks a lot!

  • @arsi_fathur
    @arsi_fathur 8 років тому +3

    hi im subsriber from indonesia. im very glad to find this channel. that very helpfully for me.
    thank.s

  • @johnfeldhausen5576
    @johnfeldhausen5576 8 років тому +1

    What setting are you in that your parts look all shiny and pretty. Mine are very dull colors. Thanks!

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  8 років тому

      you need professional graphics card in your system like Nvidia Quadro series or AMD firpro Series. other cards will not support real views.

    • @johnfeldhausen5576
      @johnfeldhausen5576 8 років тому +1

      +CAD CAM TUTORIAL I have the m970 in my computer right now. I'm running solidworks 2015. In wondering could this views be possible still?

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  8 років тому

      no its not possible you must install only Nvidia Quadro series Graphics Card or AMD Firepro Cards.

  • @afern2053
    @afern2053 7 років тому +1

    Thanks alot! great tutorial!

  • @sagarbhoir2437
    @sagarbhoir2437 6 років тому

    superb sir

  • @niravpanchal5652
    @niravpanchal5652 4 роки тому

    Jordaar Sir

  • @arifulislamamel927
    @arifulislamamel927 3 роки тому

    Just Amazing tutorial.

  • @vinaybhavsar8031
    @vinaybhavsar8031 4 роки тому +3

    Very helpful tutorials, such a great way to explaining design method. May I have some Drawings to practice?