Griot's Garage THE BOSS Foam Cannon | AUTO MIXES! | BF302
Вставка
- Опубліковано 30 вер 2024
- We broke the bank again and bought the Griot's Garage "The Boss" foam cannon. This is the BF302 version. The build quality is amazing, but the Auto Mix system is what is really impressive and innovative. Check out and let us know what you think.
Check out my Amazon Storefront
amazon.com/shop/carswithkeav
Griot's Garage THE BOSS - amzn.to/3Bcjx71
MJJC Foam Cannon - amzn.to/3v00rO6
MJJC Site - www.mjjc.com/c...
Gtechniq Products W4 Citrus Foam and Gwash.
Code Heidi10 for 10% off at www.gtechniq.com
or check out the Gtechniq section of my Amazon Storefront.
Products in video
Brass Garden Hose Shutoff valve - amzn.to/3d39O93
MTM Swivel Spray Gun - amzn.to/3s20y9z
MTM Swivel Spray Gun Fittings installed - amzn.to/3dTuKPh
Pressure Washer Hose - amzn.to/2WEaD2M
Pressure Washer Hose Reel - amzn.to/2HwjdIZ
VE52 Pressure Washer - amzn.to/3fWWqp9
Gtechniq Products W4 Citrus Foam and Gwash.
Code Heidi10 for 10% off at www.gtechniq.com
Sponsors and Discount Codes:
Sliplo - HEIDI at or 15% off sliplo.shop/ca...
Gtechniq - Heidi10 for 10% off at gtechniq.com
Blackvue - Heidi10 for 10% off at blackvue.com/r...
BBS Wheels- www.bbs-usa.com
Eurofed - www.eurofedaut...
Street Approved Customs - www.streetappro...
Liqui Moly USA Canada - www.liqui-moly...
Camera Equipment:
Main Camera - amzn.to/2IbheXB
50 mm Lens - amzn.to/3anD06y
Camera Light - amzn.to/3jtDAHW
Lights - amzn.to/3hhxGXD
GoPro - amzn.to/3wnxTxZ
Dashcam - amzn.to/38jFlOB
Tripod - amzn.to/3hoVCcZ
Gopro Mounts - amzn.to/38hmnrN
Main Camera SD Card - amzn.to/2x00FeV
Gopro & Dashcam Micro SD Card - amzn.to/2Ti2PQ0
Main Camera Batteries - amzn.to/2IqoIGF
Filters - amzn.to/2VPYPYL
My Social Media:
Instagram - / carswithkeav
Facebook - / heidithe335
Tiktok - wm.tiktok.com/...
#foamcannon #howtogetmorefoam #griotsgarage
Hi Keav, I hope all is well. I have a question:
I recently bought a griots garage the boss foam canon and planning to use it on an active 2.3 pressure washer with mtm sgs35 gun. I want to keep it below 15 amps; how should i go about it in terms of orifice size and other factors producing great foam output? Im new to this so dont mind me asking a stupid question. Thanks
Please note I havent opened the boss foam canon and can return it and instead go for mjjc, please let me know if mjjc is better than the boss to use with active 2.3?
I prefer the MJJC over the Griots when it comes to foam production. The 2.3 should have shipped with a 1.45 orifice to use with the foam cannons you will be using. It should foam great with an MJJC and stay a good bit under 15 amps. These 1.4 on Amazon work good as well. amzn.to/3yqL8oI I would not advise going less than a 1.4 size.
@@CarsWithKeav thankyou so much. I returned Griots Garage The Boss foam canon and ordered MJJC S V3.0. I'll try with the one provided, if the foam is too runny then I'll order the 1.4 and see the difference. Thankyou soo much Keav
@@fasha MJJC will foam great with the 2.3 on their nozzle. As long as you have a good foaming soap.
Just used this cannon yesterday with a craftsman 2100. Used purple tip, poured very little mr. pink in, and this thing is awesome. Nice foam and hardly used much soap, but plenty on vehicle to wash. All this with hard water. Thanks for the review. Helped with my decision.
Glad you liked it and with your hard water the Stainless steel will help with corrosion as well.
This is hands down the best video I have seen this far on the Boss Foam Cannon. Thank you.
Really appreciate that!
Dude you need to move! Bug noise is Annoying!
That’s why I built my dream garage and wash in there now. It’s one of the few downfalls of living in the countryside of the south eastern U.S. you get all the noises of nature.
I just bought this product from Amazon. But I am having difficulty turning the nozzle so it can be a horizontal spray. Whenever I hit resistance, I try to turn it (just like at 1:51), but it doesn't change the angle no matter how much force I apply. Can you provide any guidance?
Based on what others have said there seem to be two versions out there. Not sure if it’s a older and brewer thing or not. Like the MJJC they changed the cap to not allow dual threading in newer versions.
Produces quality foam. The dwelling process us important. Nice review.
Got to get that those little micro abrasives off the cars gently.
I bought one of these from OG
With the upgraded mosmatic plug and 1.1 orifice pre-installed for my sunjoe.
I also have the PF22.2 MTM cannon.
Very nice! MTM just came out with a new quick release big neck bottle for the PF22.2 You can convert your old one to work with it.
I am in the market for a new foam cannon and I've watched all of your videos. What would be better, buying the Griots Brillance and installing a metering tip for a few dollars per your "Easy $6 foam cannon hack" or to buy the Griots Boss Foam Cannon? Other than the Frankenfoamer would the BOSS still be your top choice for foam cannons?
Currently my pick would be the MJJC S V3.0. Just did a review on it. The one draw back to the $6 hack is Griots charges so much for shipping. BOSS foam cannon is amazing and what I would buy if I was going to auto-mix. I don't do that anymore as I have way too many products and constantly changing for reviews so it's not feasible for me anymore. If you are sticking with one soap and want to auto meter then the BOSS is what you want. The build quality is amazing on it.
Another amazing review brotha! 🧽
Hey, question. I just want a real specific answer.
The metering tip allows you to just put straight soap in there? I know you spoke about "not worrying about dilution ratios anymore" with it, but is that straight up? Like I can just straight up fill it to the top with soap with that little attachment?
That is correct, it will siphon the soap at a slower rate allowing all the mixing to happen in the manifold. Same technology car washes use to distribute soap and foam from large containers. Some soaps will do better than others though.
Mjjc n the boss exact for most part n you got same results from both . If your a prof detailer cost is nothing n worthwhile buys investing in both of these. Hell even I tryed the armor all cannon yesterday changed out orifice to a 1.1 its a solid performer if u change it out . N I don't buy armor all products 😀
If I was a pro detailer the BOSS and MJJC would be my pic. Probably the BOSS just for auto mixing and it weighs a little less. Plus the longevity of machined stainless.
How can griot say it auto mixes at specific dilution with metering tips if you are allowed to adjust the knob.
Dilutions are based on the max setting. If you adjust the knob then the dilutions get weaker.
Here in Canada is 80$ the old model or 160 for the big boss Ouch i will wait a bit for the new model its too bad i know its quality but its not my living .😕
Yeah it’s a big spend that’s for sure.
Well Done! It takes a lot of views from many sources to learn which cannon to choose and the information and you that you gave me was a big piece of the puzzle.
Glad to help, I love talking about the details.
Awesome review. Definitely seems like a quality foam cannon
Thanks for the review .. I'm assuming you only use the tips when doing auto-mix but if doing manual mix, you dont use any of the tips?
Correct, the tips siphon the product at different rates. If using a dilution mix take the tip out.
@@CarsWithKeav you the man, thanks!
Can you do a review on the Armor all foam cannon? For the price it looks like it could be a contender
I will add it to the list. I'm running out of room to store these. LOL
(Try this method to save more shampoo) spray the car with a little less foam first ( A LAYER OF MILK LOOKING ) NO FOAM ! just to drip off all the surface dirt then wait about 5 min to do a full drip off then power wash it off then apply a 2nd foaming really thick shaving cream. But Only on the top of the car NO SIDES using that same thick creamy shampoo From top of the car only That is when you come in with the micro rag/towel to hand wash the car first doing the top then Sliding the Foam downward from the top and using that extra creamy foam to wash now the sides saving more shampoo Then a full rinse and Done . What do you think of that way to save not a big deal but some folks want to save the Shampoo level or sqeeze as much foam you can get out of a 1 gallon Honey Due shampoo ect..
Sounds like a good way to me. Soap isn't that expensive though plenty of affordable ones out there. You could also not even do the 2nd foam on the top. Just fill a bucket 1/2 with water and then shoot the foam cannon into it. Use that for your mitt wash.
@@CarsWithKeav Did not see that 1 very good way as well to save on shampoo I really don't have any problems with squeezing every oz from the shampoo but was just trying to see what can save on shampoo usage for people that want to save every drop lol .And with my Griot's Garage THE BOSS Foam Cannon with that great AUTO MIX a Gallon of shampoo can last 1 yrs+ with washing your car every weekend
Also one more thing, usually once complete with a wash I filter water through the foam cannon to keep the chemicals from corroding the cannon. Do you just fill the container up and use it week after week or do you only fill 50-100ml and still flush with water?
When I ran auto-mix I would flush the cannon with the manifold not attached to the bottle then screw it back on with the soap still inside. Got to keep that manifold free of anything to have it last a long time.
@@CarsWithKeav no idea why they can't cover this information in the instructions which are poor at best 3/4 of the info is the standard disclaimer not useful. I hope they paid you for explaining how to properly set it up and use it. From soap, mixing, actually how to place the purple tip and its use, and how to properly clean the soap out when done. Excellent job on your video camera techniques, audio, and editing. Cheers!
@@cp1699 Never been paid for anything I just buy the stuff and figure it all out testing it. I like to be unbiased. Some do send me free items, but Griots doesn’t do that.
crazy foam...looks like a great product..great review dude
Thank You, I was surprised out how good it was at auto mixing.
1.1 jet and aqua metering tip test that then deside
You can’t use a 1.1 on a high flow output pressure washer such as the Active. It will go way over the amps rates for the motor. Now on a Ryobi or any of those 1.2gpm machines for sure you can. I have added that to my future testing to use two different pressure washers with different tips.
when you use the auto mix do you put water in the foam canon or just straight soap? ordered some purple ones for my brilliant finish canon I just ordered from watching your video as well!
Straight soap, you can adjust the thickness of foam you want with the dial on the unit. The manifold will mix for you.
@@CarsWithKeav nice thanks so much! really excited to get it as my cheap amazon one broke yesterday after having it for 2 yrs
@@chrisguzman7926 That’s pretty good longevity for the price on the Amazon one.
So other than machined stainless vs.brass bodies, the main difference between the 2 foam cannons tested is a small 50 cent changeable plastic orifice on the pickup tube to allow you to auto-mix?
Can you order those plastic orifice replacements parts from Griots for when you lose them? (Or to upgrade your MJJC cannon?)
Ok, so you can buy a set of the 3 different plastic metering tips on the Griot’s website for $5.99. Could you test if they fit in the MJJC cannon pickup tube and report back how it performs to auto-mix?
I could see the value in adding that to my MJJC foam cannon to be able to dial it in to use soap mix undiluted.
After reading Griot’s page more carefully, for $5.99 they sell you a set of 6 orifice tips but they’re all the same color (orifice size). You have to select which color you want. The product description lists which color is optimal for gas/electric/max foam. So 6 for $6 but all the same orifice size.
They do not fit as I have already tried, but I'm trying to figure it out. It's just a change to the orifice of the pickup tube to be like a pinhole. The MJJC metal ball is very small and has a plastic tube with a filter built in that is glued and pressed into the ball opening. The Griots ball is much bigger and is all one piece of metal. There is a barb that sticks out the end to attach the pickup tube. I checked and the plastic on the MJJC is not big enough to drill out and use the metering tips. Now for the fun part though as the tip can actually fit in the tube itself whether at the top before the cap or at the bottom just before the ball. I have not tested yet, but the theory is sound as the metering tip fits very snug in the MJJC tube. Now could there some kind of pressure difference? Possibly, but only one way to find out. Will let you know.
I see you already answered your question, but to add I think the MJJC is machined as well just in brass. What do you think? I will say with liquid the Griots is super light compared to the MJJC.
How many ounces of soaps again?
90 to 100 ML so right at about 3 ounces.
So at this point what is your best/favorite Foam Cannon ?
If money is no object right now it’s the BOSS by Griots.
@@CarsWithKeav so true I just ordered 1 from there web sight I can't wait to put it to the test I love the fact that you can just add the Mr pink only no water and it can do the watering for you with (Auto Mix) that is really a game changer right there and with a 1.1 m orifice it will.shoot nothing but shaving cream 😀 liken that 👍
what electric power washer are you using ?
Active VE52
@@CarsWithKeav Thanks for replying Love your channel from a fan .Also I will love to see you use a AR Blue Clean AR630TSS or a Kranzle 1622TS you would be a perfected user for them pressure washers . I am thinking about buying the AR Blue Clean AR630TSS Why! the unit can be used with Hot Water and Cold water. The Kranzle 1622TS is also very good but the AR Blue Clean AR630TSS got it beat with Hot water and cold water .
@@TonysLawnCare215 I have been looking, but they are inflating the prices like crazy. Used to be in the low $600 range. The VE52 can do the slightly better numbers than the Kranzle for 25% the cost. 630 is slightly better numbers, but both require 20AMP which I don’t have yet.
Diesel bmw ?
Nah, just straightpiped and catless. Sounds like a diesel at idle and at low rpm with the big turbo whistle then sounds more like a gasser when you hit the throttle.
Griots states in their videos if your pressure washer is 2,200 PSI or lower to use the 1.1mm orifice for thicker foam 👇🏾
ua-cam.com/video/c9IqeNUI5YA/v-deo.html
ua-cam.com/video/JA1Qm3xRHN0/v-deo.html
Thanks for that information and it's true that a 1.1 will get thicker foam for sure. I'm surprised Griots would be that reckless in a statement as there are so many other things to look out for when choosing the size of the orifice. I run the 1.25 mainly because the Active VE52 likes to push close to 14 AMPS when using a 1.1 orifice. The unit is rated at 15 AMPS so that's safe, but if I can run a 1.25 at 12.5 AMPS and I still get great foam, then I will be prolonging the life of my machine. I have had a machine that went over the rated wattage of the motor running a 1.1 orifice as well and it was advertised as 1800 PSI. Going over the rated wattage is a recipe for short life and overheating.
@@CarsWithKeav Yeah I agree with you. It’s more about the electrical requirements first and maintaining the machine first. The foaming is last because GPM, Water Quality, and a Good Foam Cannon all contribute to the Good quality foam
@@positivevibes4957 Couldn't have said it any better. Forgot to mention eater quality as well which is huge for foam.
@Positive Vibes I use the Kill A Watt to measure my amps. amzn.to/3GA2K0e
@@CarsWithKeav Thank you for helping me out and making great quality content.
Great review Keav! Would you say the "The Boss" foam cannon is better than the MJJC foam cannon when paired with the Active VE52? In terms of overall foam thickness and not having to switch to the 1.1mm orifice to overwork the pump?
I would say using the auto mix metering tip does create slightly more foam, but it did use more soap than my usual dilution. So I still think for the amount of soap the MJJC still shoots thicker foam and is the more efficient unit, but how light the BOSS is plus the Auto Mix does make it my current favorite. I’m going to try and retrofit the metering tip into the MJJC though. If it works I will make a video on it.