Baron's Air Kit Installation - Do it Yourself - Video Guide: Tip of the Week
Вставка
- Опубліковано 15 жов 2024
- Kelly & Kyle of Cruiser Customizing introduce and demonstrate the Installation of the Baron's Big Air Kit known as the BAK. Air kits allow your motorcycle to breath better and with the addition of a jet kit or electronic fuel manager, this installation can provide the greatest HorsePower increase for your money. Stay tuned and learn more about BAK!
Store: motorcycle-acce...
CONNECT WITH US:
Community: www.cruisercust...
UA-cam: / cruisercustomizing - SUBSCRIBE
Twitter: / cruisercustom
Facebook: / cruisercustomizing
Pinterest: / cruisercustomizing.com
Coupled with a free flowing aftermarket exhaust, some models of motorcycles have seen 12% to 20% increase in overall power. Call 888-857-5417 or 925-583-2200 to speak with a Barons Big Air Kit Specialist or visit: www.cruisercust...
Enter to WIN this V-star!
www.surveymonk...
Choose from our large selection of top-of-the-line motorcycle air intake systems! Easily navigate hundreds of products all in one location.
Thank you for watching this Cruiser Customizing Tip of the Week!
Until Next Week,
Take Care & Ride Safe!
Kelly & Kyle
Thanks for a great video showing the install. Installed my baron bak and short shots today and this was a big help.
Awesome job guys, great tutorial.
The brass screws that are drilled out are actually plugs that are removed to access the actual mixture screws. You do not replace the plugs.
I have a stock 2008 VStar Classic 650 but live in Denver, so it's a very big change in altitude for the bike. Would you recommend re-jetting and putting on the Baron's Air Kit? The bike seems to do fine until we get to about 80 mph or a headwind, then it's difficult to get much power. The air up here is just very thin.
4:22 Love that exhaust tone
Yes, both get done the same!
It was never answered do you replace the brass plugs after adjustment??
Hey, great guide on this how to ! quick question, when you drilled out the brass fitting, do you have to replace that ? does the barons kit come with that ? And also, I see you drilled out the " left " side of the carb, do you have to drill out the right side as well ? Thanks ! and keep up the good work ! I'm learning a lot !
its looking good!
I jetted my 2005 vstar 650 and put spike air intake on it and when i go full throttle it bogs down y is it boggong down what do i do to fix it
Hi, i have an important question. When you tapped the 2 brass screws, do you replace the same screws or install new ones? Does it come with the Barons kit or purchase separately? Thank you
What size is the self tapping screw you used?
can you tell me the size off the main jet? thanks
hey great video, when setting the fuel mixture with the three rotations, i see you only displayed the process on the rear carb box, do you also set the other carb box with the same three rotations for proper air/fuel mix? Or just do the one. thanks
You need to do both. Another more precise way to set them is to pre set them to three then warm the motorcycle up and one at a time slowly turn the fuel screw in until you hear that cyl start to die then slowly open the screw until the cyl picks back up and from that point turn it one more full turn out. Depending on the mods and mileage on the bike and the altitude of the state you live in the end point will very. If your bike runs better with the screw in more than 2 turns you have a carb problem and if it wants to be out more than 4 or 4.5 turns you have a carb problem.
onde posso comprar esse Kit?
Hello, thank you for the video!
I have an 06 model, aftermarket exhaust already on bike. I have just rejetted and put intake on. However my air fuel mixture part is different to the ones in the video, eg. no brass plug to drill out although I have turned the fuel mixture screws I do have anti clockwise 3 turns. Now the bike just only turns on with the choke is on, and dies once I turned choke off? any ideas?
thanks
If you purchased the bike used it may have already had a jet kit. Did you keep the old jets? Verify that the new jets are larger than the ones you removed. If the jets are smaller try reinstalling the ones you removed.
Cruiser Customizing Video what size jets did you guys use
I have a 2005 Vstar 1100 silverado. If I can only afford to do the air, jet, and exhaust in stages, what order should I do them in?
It might be best to collect all the parts before installing them. The jetting and exhaust need to really be done in unison. The intake could be installed before the others if you choose.
Thanks. I'm going to try to install the BAK tomorrow, rejet and sync, then will in the future do the pipes and rejet and sync again. Hopefully this works out.
Bear Can Ride has it so far?
What do you have for an exhaust system on the bike?
Is this exhaust system allowed in Germany?
Thanks
That is a cobra slip on slashcut. I have the same exhaust. I did not rejet. I adjusted the air fuel mixture screw and synced the carbs. It's good.
you guys are a little stiff on the acting, but beautiful workmanship lol, bravo
Song 2:31 ?
what bike?
That is a Yamaha V-Star 650
Kristen Stewart acting😂
So awkward