CARELL UNI 70/C Mandrel Type Tube/Pipe Bender
Вставка
- Опубліковано 29 сер 2024
- CARELL UNI 70/C Mandrel Type Tube/Pipe Bender with 10' Mandrel Table
Our UNI 70/C tube and pipe-bending machine uses a rotating former about which the tube/pipe is bent. Quality bends are produced swiftly and efficiently without using an internal mandrel. Bends requiring a mandrel can be accomplished with the optional mandrel attachments.
Specifications:
Bending capacity: 2-3/8" OD x 0.125" mild steel
Max. black iron pipe: 2" Schedule 40
Max. bending angle: 180°
Max. bending radius: 9.5"
Mandrel table length: 10'
Useful tube over mandrel length:
Main motor: 3.5 HP
Included:
Mandrel Former Radius with 2.5” CLR
Locking Jaw
Slider
Wiper Die Support
Wiper Die Connection
Wiper Die
Steel Mandrel for: 1.75” OD sq x .065” x 2.5” CLR
Features:
Digital Programming & Rapid Approach CBD Support
Automatic operation: Former rotation electronically controlled
Programmable Control for precise bends 50 programs of 6 bends each
Bends up to 180 Degree Bends in one operation
Quick Change tooling, that can be carried out in a few seconds
Two Speed Operations: for fast and slow control
Self-Braking TEFC Motor: for precise stop at preset degree
Wide Range of Bending Radii: from 1/2" (special former) to 11"
Rapid Return of former on backstroke with ‘non crush’ safety movement
Portable Unit: compact yet rugged unit can be easily moved
Standard Equipment: 1 small & 1 large arbor, rapid approach/release cam
Type CBD bracket (RCCBD)
Optional:
13' Mandrel Table with useful tube over mandrel length of 14.9’
Mandrel tooling sets are comprised of 5 components:
Former, Clamp, Wiper Die, Follow Type Pressure Die and Simple Plug type M
Longer mandrel set-ups on request.
Tooling Sets complete with all required components including a plug type mandrel. Articulated mandrels can be quoted separately.
Tooling Set for CLR from 1.20” up to 3.14” approx.
Tooling Set for CLR from 3.15” up to 5.10” approx.
Tooling Set for CLR from 5.12” up to 5.90” approx.
A easy to use machine with a programmable control for precise bends 50 programs of 6 bends each. Former rotation and return is powered for rapid operation. Bending angle is electronically set through the Microprocessor & Digital Display for precise bend control. Die rotation to bend and return to start position are effected through double push buttons, machine mounted controls.