One length of Rain Gutter (To fit your aquarium), 2 Gutter End Caps, 1 roll of reflective (Silver) Duct Work Tape, 1 Remote Waterproof LED strip kit from EBay to match Aquarium length (10.99 + free shipping). Line your gutter on the Inside with the reflective tape, run your LED Strip over the reflective tape and the power wire through one end cap. You can add additional tape to support your lights but the factory Adhesive is more then strong enough. Paint your gutter cap Black on the outside if it's exposed, draws less attention. Plug it in and play with the settings. It is a Cheap Alternative to most DIY Aquarium Light Projects. This is a KING OF DIY project, Joey. Not my idea, but I have used it on every aquarium I own. If your not familiar with Joey, KING OF DIY, look him up you won't regret it.
Nice idea, but I feel that it should have been made longer to give a bit more stability. Perhaps designed to hook over the ends of the tank. Also the wiring connection could have been done properly, and would have made it look a lot nicer.
The arowana will eventually end up dead in the floor, and since they can break through class canopies, electrocution is a very real possibility with the way you have chosen to just rest the light across the tank. gl!
The idea is good, but the execution is bad. The wire ends must be insulated (heat shrink tubing) and the connections soldered and insulated with heat shrink tubing. In addition, I test the function before I close the final.
Muito boa a ideia vou fazer parecido vou apenas passa um fita preta em cima e nas laterais assim não ilumina o teto semente o aquário....muito obg pela idéia
People wondering what the leds are called and where to get them. Doesn't look like this guy is gonna help. But look up led modules and you'll find a few different designs and colours. But connected in string type like these. And for the the connector look up led inline connectors on eBay and others.
It is an idea up on which every on can work to have their own DIY project. As the saying goes " I can feed food in your mouth, don't ask me to chew it for you though".
@@kevintango6567 LED lights DO generate a small amount of heat compared to other light sources. They Can burn out if it is not dissipated and the temperature gets too high
What about maintenance. What if the strip get fused. How should you replace the strip. Again hav to do all process by removing glass slab and replacing LED lights again to silicon it. Very hectic process.
all things people say aside, I just didn't like how you used silicone so little... if used black caulking to coat top and used it on sides... or used alminum/acrylic with epoxy. i may have liked more...
Does anyone knows if LED as the same effect on the tank as the regular aquarium lights, i mean if im gonna have any sort of problem with my plants. Can anyone help? PLEASE and THANKS
as long as the wave length is right, photosynthesis will occur. if the WL is wrong then no matter how blight it is it may not work as much as you spend money on.
That's what I did and used PVC guttering lined with aluminium insulation tape for the reflector. Plus you can use your phone with the app to program and adjust colour etc.
ChiChinLighting 20 Piece Pack - Lucky Red 12 Volt LED Module - SMD LED Chip - Red LED Strips - Super Bright - IP65 Waterproof www.amazon.com/dp/B00QLZI4DI/ref=cm_sw_r_cp_apa_i_8khKCbEVANQ87
![Aquarium model 5 - How to make a led light aquarium - [Piece of Paper]](http://i.ytimg.com/vi/gE5VeGa5s5s/mqdefault.jpg)
![Aquarium model 5 - How to make a led light aquarium - [Piece of Paper]](/img/tr.png)
Bagus kreatif👍...
Salam sukses...
Nice diy lights perfect for aquarium 👌👍
One length of Rain Gutter (To fit your aquarium), 2 Gutter End Caps, 1 roll of reflective (Silver) Duct Work Tape, 1 Remote Waterproof LED strip kit from EBay to match Aquarium length (10.99 + free shipping). Line your gutter on the Inside with the reflective tape, run your LED Strip over the reflective tape and the power wire through one end cap. You can add additional tape to support your lights but the factory Adhesive is more then strong enough. Paint your gutter cap Black on the outside if it's exposed, draws less attention. Plug it in and play with the settings. It is a Cheap Alternative to most DIY Aquarium Light Projects. This is a KING OF DIY project, Joey. Not my idea, but I have used it on every aquarium I own. If your not familiar with Joey, KING OF DIY, look him up you won't regret it.
Could you please share the link of king of diy
Very nice sir I have plant aquarium
great video
done the same with clear pvc tubing
silicone the ends and was a winner.
top notch
hey what name of the led light he use?
Wt led light name
Great idea Super
Where to buy the low iron glass?
Wow..... Very nice and warm regards
The better you watch on 1.75x😂 xd
Excellent
Nice idea, but I feel that it should have been made longer to give a bit more stability. Perhaps designed to hook over the ends of the tank. Also the wiring connection could have been done properly, and would have made it look a lot nicer.
Nice DIY light but criminally small tank for an Arrowanna. This tank needs to be like 3 times it's current capacity for an Arrowanna.
very nice
Are the lights normal led white lights or specially we get lights fir aquariums ?
Where do we get these lights @..
Is this light can help to grow Aquriam plants
Does these LED stripes work for growth of basic plants?
This is nice great
what is the name of the leds? is it availble in market? is it called led strip or wat name is it called?
U made it from glass or acrylic? Im sure it super heavy weight
Request pembuatan lampu aquarium 3 warna bang, tp setiap 1jam sekali atau brpa jam sekali lampu nya nyala secara bergantian di setiap warna 🙏🏼🙏🏼
The arowana will eventually end up dead in the floor, and since they can break through class canopies, electrocution is a very real possibility with the way you have chosen to just rest the light across the tank. gl!
Dave Smith Class canopies
power suply 12v?
Can you try with mirrors and black glass that way you can make it look more refined
Hola donde has comprado los LEDs y que tipo son.gracias
Cool design on the light.
Cuantos luces led puedo poner para mi acuario de 1metro 3 de largo x 35 cm de altura x 28 cm de ancho gracias
Wonderful amazing
Nice idea but i wpuld suggest u to put a cover on that tank since arowana can jump out of the tank...
ua-cam.com/video/dzU5_NfQkjg/v-deo.html
Very nice, what is the name of the gule?
Hola amigo, me encantó tu lámpara. No te molesta si copio tu modelo?
Can't suffer the music enough to watch full video. It's brutal.
Sir anong tawag yang input at output jack?
🌷Good 👽👀👆✍️
you can buy a LED strip at Walmart for $5 with remote control and change to any color you want. Thank you for sharing
Link Please
Any sources on where to get the materials?
🌟Good🌟
Crazy idea I was just thinking the same too too on how can I make a cheap led light for my tank
Horror film sound thaa
The idea is good, but the execution is bad. The wire ends must be insulated (heat shrink tubing) and the connections soldered and insulated with heat shrink tubing. In addition, I test the function before I close the final.
Very nich Bhai to Good
For my Flowerhorn 4 ft aquarium what materials size is required. Please give.
Can address where I got the LEDs?
how do you calculate the watts...
Como se funda un led a ver cómo lo cambia. Rompes el cristal?
Hola, de qué medida es tu pecera y que grosor tiene el cristal?
Led light gud ,,,where buy this led lights
So mach effort , money , time for what ?
The cost of that its way more than aquarium led from Ebay
The look ?
what’s the reason of all that ?
Please give the sizes. LBHT of the glass. Thanks
How to purchase Led light send the link
Where u buy the lights off of
Tutorial was good... But Can't tolerate the music...
7:50 what is the name of this help please
Muito boa a ideia vou fazer parecido vou apenas passa um fita preta em cima e nas laterais assim não ilumina o teto semente o aquário....muito obg pela idéia
Ah a led vou por apenas uma colorida assim da pra escolher a cor...tem opção com controle remoto e já vem com a tomada sem precisa fazer remendo
What about heat?
Could you tell me how to manage the heat????
People wondering what the leds are called and where to get them. Doesn't look like this guy is gonna help. But look up led modules and you'll find a few different designs and colours. But connected in string type like these. And for the the connector look up led inline connectors on eBay and others.
Available on Amazon, look under led capsule
Very nice #diyaquarist
Amazing
Clicked. . Paused. . Saw the amount of advert tabs . . Left.
Not all advt. tabs ll pop out
Cool story, Bro
nice idea, great guide..
can i ask what are the electrical materials u need for it?
If u placed this on top of the aquarium then wt was the fun making this water proof.. we could use waterproof LED strip also.
It’s totally pointless showing how to make this without giving links to where to buy the parts required.
Or replying to anyone...
Everything available on Amazon
It is an idea up on which every on can work to have their own DIY project.
As the saying goes " I can feed food in your mouth, don't ask me to chew it for you though".
Just look up led modules on ebay or similar sites. The rest is acrylic, plastic or glass. Your choice. And silicone.
nice
Did he just remove the double side tape at the back of the led and stick them using super glue?
Why didn't you paint the glass from top and from sides with black colour. the light would not reflect outside, it will focus beneath only.
Correct
Good idea, might have been nice if you edited the video to be shorter.
Yeah
Wow...i Will try it,it's awesome.Thanks for the sharing.😘
Ye mai bahot pahle hi bana chuka hu old ho gaya hai ab😂😂😂
Yaar mai bhi bananeka soch rahahu, will it last for more than a year,I won't be using any fan either....
That music!😲🤔😂😂
aluminum backing is more practical for dissipating the heat
i'm pretty sure there is no heat from led lighting
@@kevintango6567 LED lights DO generate a small amount of heat compared to other light sources. They Can burn out if it is not dissipated and the temperature gets too high
Cool but how are you planning to cool the LED’s?
with aquarium water ...hahahaha
What about temperature inside the lamp
nelson gonzalez they had cooper heat sinks on the back sides
One LED not work, how to repair..??
What about maintenance. What if the strip get fused. How should you replace the strip. Again hav to do all process by removing glass slab and replacing LED lights again to silicon it. Very hectic process.
Vou copiar, obrigado ;)
Nice idea, but not very safe for the arowana, if it jumps and taps that fixture, it'll probably get electrocuted, good luck buddy!
Where is the On/Off switch? Where are the links to the parts?
This video could have been A LOT SHORTER!!!!
Music super
Vendo assim, parece fácil!
The music was horrible.
I watched the video by mute
Same
Where I can buy those lights ??? Provide me link 😊
El adaptador de cuanto es
all things people say aside, I just didn't like how you used silicone so little... if used black caulking to coat top and used it on sides... or used alminum/acrylic with epoxy. i may have liked more...
I purchased this type of led but they only last about a year to eighteen months then burn out but they are very bright and stick well
nice idea but low IQ for the open tank for the arowana.., haha
Had to be done with powerled
Sux light. Standard led.
Where Did I Found These Led Light's Brother ...Please Share Proper Information Bro
Available in most of the electrical shops just rs10 per piece
@@shareehshakkir9925 rs10 per piece? What does that mean?
@@martinalbert5653 each module of 3 LEDs cost 10 INR...I bought a few today
@@arkajitchatterjee8289 What is rs?
@@martinalbert5653 INR..or Rupees.I made mine today....
So i want asking u How to make LED aquarium light?
Thr is no difference in before n after
Cuanto mide ese acuario
Does anyone knows if LED as the same effect on the tank as the regular aquarium lights, i mean if im gonna have any sort of problem with my plants. Can anyone help? PLEASE and THANKS
as long as the wave length is right, photosynthesis will occur. if the WL is wrong then no matter how blight it is it may not work as much as you spend money on.
@@kazy425 Thank you
Probably would have tested the lights before I sealed the glass on it 🤷🏻♂️
An alternative is to use ready made, cheap waterproof LED strips...I have a video on that, if interested
Hiiii can u pls post that video link, tnx in advance.....
That's what I did and used PVC guttering lined with aluminium insulation tape for the reflector. Plus you can use your phone with the app to program and adjust colour etc.
Круто молодец
Better idea..But ye l e d light kaha milege...
Ok where to buy the red led lights?
Ebay
Bangkok Bruce name of product please
ChiChinLighting 20 Piece Pack - Lucky Red 12 Volt LED Module - SMD LED Chip - Red LED Strips - Super Bright - IP65 Waterproof www.amazon.com/dp/B00QLZI4DI/ref=cm_sw_r_cp_apa_i_8khKCbEVANQ87
100w chip in your choice of spectrum off ebay SMD/LED chip and a 36v 1400ma driver cheap piece of aluminum 18 x 6in will murder this LED in the video
Muito bom 👌 aonde comprou? mande o link por favor 🙏
Ye LED Kahan milta jai Aur Isla naaam kya jai ? KRIPYA BATANE KI KRIPA KAREIN.
Tell me glue name??
Silicone Glue.
Poor workmanship never leave wires open or uncapped around water
it's DC power
@@gstarny So are tasers.