How To Fix Samsung Washing Machine 5E/SE Error
Вставка
- Опубліковано 14 жов 2024
- A quick tutorial on how to fix 5E/SE error on your Samsung Washing Machine. A common draining error. Covers Samsung model WF1752WPC and many other models. A simple fix that can be done by anyone. * You can buy your new Drain Pump too at www.ebay.com.a...
Very good simple clear instructions video. I brought my ecobubble about 2 months ago and im a girl trying to fix this.. your video is the easiest too watch. Thank you 😊
Hi thanks for watching the video. Glad you were able to understand it. Welcome. Always happy to be putting this information out there to help more people
Just did this & my toddlers sock came out of it. Fixed the issue so thanks a lot! This is a new washer that came with our new place & I’m still learning how to use it.
I just found my kid's sock as well. You'd think they'd design these to not eat clothing lol
@@MissWinkle555 ikr!
Thank you! I had already tried cleaning the filter. After I watched this I went back and checked behind the filter with a little plastic piece made to pull hair out of drains. Sure enough my daughter's sock and a big piece of a toy? came out. I'll definitely check behind the filter every time I clean it out from now on.
Thank you for saying this! I was fast forwarding through the video because I already cleaned the filter but it kept erroring… So I skipped that part…. Then I read your comment, sure enough, action figure in there!
By "behind the filter" do you mean the black rubber housing/piping? I have seen another video where the guy takes this off but you don't seem to have taken it off so was just wondering how you got access that you could pull out the sock etc.
Attempting to fix my Samsung. Did all the checks. Now ordering the drain pump.
Thank you for the clear and concise instructions👏 you deserve millions of views and subscription.
Welcome Thank you that’s encouraging. Hope you’ve been able to get it working again
@@askmrwashywashy
Thanks to your clear instructions, I ordered the drain pump, fitted it in, and the machine is good as new.
Yow, I saw that SE and this was the first video I saw... attempt number 1 and all is ready to go.
Thank you Bro 🙏🏽
Yessss! It worked. Thanks for making me look like a house hero !!
Awesome. I'm glad you could fix it. Well done mate
Cleaning out the filter worked! Washer drains now in under a minute!
Awesome well done
Yezzz!!!! Thank you so much 🙏🙏🙏 You video goes beyond the manual. Helped me get the machine back to work. No more 5E.
Yay. Welcome glad you could get it to work again
Thank you so much, I was able to replace our pump and the process was a lot easier than I would have expected!!
Thank you so much. It worked and now I don't need to buy a whole new wash machine.
Thanks for the video. saved few hundred rupees. Found 9 coins in the filter.
welcome nice and you found some money as well not a bad day
Me too. I just found 9 coins.
GOOD JOB AND CLEAR INSTRUCTIONS
Hi, I can’t get the screws off the bottom plate. Could I do a video consult with you? I’m in NSW. I think the plate is soldered on
Thanks heaps, found a bit of elastic tangled around the pump 😊
Awesome easy fix 😃
Thank you so much! Well explained
Thank you! I found a .. rope (!) on this small propeller. It works now! Greetings from Poland 👍
wonderful video. solved my problem ! clear and concise. Hope you make more and I love your accent. Thank you so much
Thank you so much for your video!We were able to fix our washing machine.
Glad I could help!
yeah maan you are good thanks for spreading the knowledge......
Welcome glad to help
Hi, thanks your good video. Our machine gives the same problem. İ check the pump with external electric and it works good. I think while machine washing doesn't go electric to pump then manually i gives electric to pump that works and drain dirty water. After that machine go an so until finish.
Do you think is pump good? Or is there a PCB problem?
I have the same issue, i tested the pump with my external current and it works, but my machine won't drain the water
Did either of you find a solution??
Hi! Great video thanks so much. I was just wondering, when I try to pull out the terminals to the pump, they are super hard to get off, I feel like if I use much more force, they will break. Got any suggestions? Cheers!
Got em but damn, felt like I was gonna break it 😂
Such a good video, thanks again!
Hi mate thanks you can use a flat screwdriver and use it to wedge off the pump and terminal. Otherwise pull hard you won’t break the terminals
Welcome mate. Glad you got it sorted
Is there any way to tell if the pump is broken, there is no blockage and I'd already cleaned the filter only a few weeks ago. If the hoses are free from blockage, will it be the pump?
Thank you so much for this video!!
Thanks dude ..it was really helpful
Welcome. Glad it helped
Sorted my problem, thanks mate.
Glad it helped
IT WORKED, YOUR AMAZING !!!!
Great!Glad it helped you
Great video very very helpful
You saved me
Welcome. Glad it helps
Thanks sir ..good video
If the washing machine is full of water and I open the filter, wouldn't all the water come out? It didn't come out. The filter seems fine. I had to open the door to get all the water out. Does that mean it's not the pump?
Great video! You saved me a ton of time and some money!
Welcome glad it helped
Ive followed all your advice, no blockage. How do i tell if its the pump?
Hi put it on spin only cycle have a look to see if the pump is spinning freely inside. Look inside with a torch
@@askmrwashywashy Thankyou for all your help. The pump is spinning, the filter is clean and the hoses aren't blocked, what else might be causing the intermittent lack of draining? It happens mostly on the daily wash program? I'm stumped.
@@harriettfox if your drain hose is connected under the sink there might be a blackage where the hose connects to the sink.
There's no sink, it plumbed into the mains in the garage, I don't see any kinks in the hose.
I don't understand why you didn't unplug the drain hose to release any water that may still be in the tub. Upon opening the debri trap if there is any water in the wash tub it will come flooding out everywhere including under the washer possibly the dryer as well (if they are placed close together) and with the smell of the water I doubt any sane human would want the horrid sulfur smell in their home 🤷🏼♀️ its such s simple first step to remove the plug to the drainage tube. It could be a few minutes up near an hour before all the water is drained. You told make s video showing this step for sure. In regards to the rest of your video it was fabulous.
Thank you so much it worked
Welcome glad it helped
Great video thanks
Welcome glad it helped
Good video man, I also changed the drain pump and l continue whit that problem 5E I have the Samsung WD7102RBW, can you help me please?
Thanks, glad you found it. Make sure you reconnected the wiring to pump. If the fault persists highly likely there are coins stuck in the black pipe that comes from tub and also check your grey drain hose make sure there are no obstructions. Also check if your washer has two pumps, you might have changed the wrong one
Thanks a lot....it worked!
Awesome glad it worked out for ya
Thank you so much.....i tried and succeed
Great I’m glad it worked out
Awesome, i think i could do it!!! TY TY TY
Awesome stuff mate! Thanks
welcome mate glad it helped
Thanks mate, helped alot! :)
You are an absolute legend thanks for the video
thank you so much!
Thanks you brother i solve my problem now
Thank you
Found a face mask in mine that would be the problem cheers 👍
Welcome Glad you could sort it out
Hi I have same machine have dE error pl help out how to fix this issue
Legend!
Quality stuff mate, helped me a bunch
welcome glad it helped
Would you please tell me - should the spinning part on the drain pump have tight parts and loose or should it just spin freely?
Hi it should spin freely but with a bit of resistance too. If it’s a bit loud when draining it’s worn
Thank you for easy to understand.
welcome glad it helped
Thankx
Great video
Thanks Bro!
Any tips for when it's not the pump?
check your drain pipe and where you drain pipe goes intpo might be a blockage there
@@askmrwashywashy whole drainage system seems to be flowing fine 🤷🏽♂️
Assuming pcb
Are you a Samsung washing machine
I have a washer dryer have a burning smell coming from it on drying sometime
Hi. You need to check if there is lint buildup inside. Also are you doing time dry or cupboard dry option
@@askmrwashywashy no build-up inside
But there's no way of taking Lint out of the duct any way because enclosed
And you're not allowed to touch only
Engineers are
What's the difference between the drying functions you said
Your parts link isn't working. Do you have an updated link?
Hi sorry I will update it now
Where’s the link??
Thanks bro
Welcome
Great 👍🏼
Great
The filter it’s clean what else can be.?
either coin stuck in the pipes or you need new drain pump
@@askmrwashywashy thx mate
Salam
Thanks
Shit load of water came out all over my kitchen floor
Same here its a drain smell mess. Mopping now😂