Stylize and Animate Font In DaVinci Resolve 15

Поділитися
Вставка
  • Опубліковано 7 сер 2024
  • The text+ node has a lot of flexibility and customization options for stylizing and animating your text. #DaVinciResolve
    -- Follow me --
    www.jayaretv.com/
    / jayaretv
    / mrjayaretv / jayaretv

КОМЕНТАРІ • 117

  • @surefocusmedia
    @surefocusmedia 6 років тому +58

    this guy came outta no where and is the new g for davinci lol

  • @TheGalacticWest
    @TheGalacticWest 4 роки тому +17

    everyone: daVInCi Is pOWeRful
    Me: all i want to do is bend my text into an arch.

  • @ColonelK0rn1
    @ColonelK0rn1 6 років тому +1

    Dude, I've been using only Title texts in my videos since I'm a beginner. My mind was just blown with this video. I've already subbed, on a binge watch now.

  • @dalegreer3095
    @dalegreer3095 5 років тому +2

    Dude, most videos I have to turn up the speed to at least 1.5, and even then I click on the timeline to speed things up. This one is dense like reading a physics paper. I have to pause and reflect, pause and replay... there's so much good information in it!

  • @sleetvisuals
    @sleetvisuals 6 років тому +1

    JR, you are quite the Fusion master. Thank you for all your tutorials!

  • @CineSoar
    @CineSoar 5 років тому +1

    I wish I had run across this a week ago! What a powerful and relatively hidden, set of tools! I needed bold, block text, with a dark blue stroke (outside only) a black drop shadow and a gradient white stripe, horizontally through the blue faces of the letters. For the project, I ended up doing it in layers, one to get the clean black drop shadow, one to get the gradient (using the color controls, to blow gain up to white, under a softened power window), and then a third with the faces keyed out, to add the dark stroke (without gradient) over the top.
    Ultimately, it was the same result (and with the learning curve, perhaps the same amount of time), but this is much more elegant and now, I have to take back all of the bad things I muttered about Davinci not having more powerful text tools :p

  • @DaytonaShooter
    @DaytonaShooter 5 років тому

    Thanks Jayare.... These videos that teach us what to look for, before knowing what's out there, are really helpful.

  • @BockaufHolz
    @BockaufHolz 3 роки тому

    I think, I have to rewatch this video many times because there is soooo much value. Thank you for showing the possibilities of manipulate the text in fusion.
    Best Regards, Patrick

  • @Varstahl
    @Varstahl 4 роки тому

    This straight up is the best video on the subject, told me everything I needed to know and then some coming from After Effects and Premiere.

  • @alex.muntean
    @alex.muntean 5 років тому +1

    Thank you for these videos. You are helping the community tremendously! :D

  • @massimodambrogio
    @massimodambrogio 5 років тому

    Man, your tutorials are simply awesome. Full of informations and nice to watch.

  • @SwimBikeRunFastest
    @SwimBikeRunFastest 5 років тому

    Incredible. I learned more in that 20 minute video than I have in a year using resolve. Thanks man. Awesome video

    • @JayAreTV
      @JayAreTV  5 років тому

      Nice, good to hear!

  • @Hirudin
    @Hirudin 5 років тому +4

    I just spent hours looking for a way to change formatting of specific words/characters... Seems like it would be simple, but, as you said, you'd probably never find it. I searched like crazy, read a bunch of unrelated forum posts, tried adding HTML tags, tried learning and adding expressions, tried finding a way to do it with Lua, bringing over other text from a different formatted text node... etc. Then, after giving up and moving along, UA-cam recommends this to me.
    Thanks a bunch! (several of your other videos have been helpful as well, so thanks for those too!)

  • @bradsatern494
    @bradsatern494 5 років тому

    This was so helpful for me! Thank you! I'm literally just using Davinci to make vid ads for Instagram etc right now, but making the ads POP will get more attention and you showed me like 1000 things in 19 minutes that I can implement.

  • @michaelhebert6328
    @michaelhebert6328 3 роки тому

    What excellent advanced fusion techniques! If you know fusion but don't know about modifiers this is a great video. I could see how some could get lost if you don't know fusion well. Thanks for all the information!

  • @luciusphil
    @luciusphil 5 років тому

    great one. it's always good to know about the different options and being inspired by short examples from you

  • @harpazohope
    @harpazohope 6 років тому +3

    Great stuff! Another suggestion... A year ago I looked for a tutorial on how to do a cinemagraph in resolve, and there wasn't one. It's easy enough to translate from one program to another, but it'd be nice to see a resolve specific video. 😊

  • @carrytrainer.editor3321
    @carrytrainer.editor3321 6 років тому

    Thanks, I was looking for this in Fusion yesterday. This is huge!

  • @LetsJustRide
    @LetsJustRide 4 роки тому

    Your video has taught me so much! Thanks a lot for putting this up and making it so clear

  • @youknowhoo
    @youknowhoo 5 років тому

    I've never been so intrigued and lost at the same time. Earlier today, I decided I want to make a montage (montages in 2018... I know) and was looking into a free video editing software. I have never edited anything before and all of this is way out of my comfort zone, as I still have to learn the basics of the program, but this will definitely come in handy later when I have a more general understanding of what I'm doing. Thanks for this. I'm gonna sub and peruse through your older content until I get a grasp of the rudiments.
    Take care.

  • @TerenceKearns
    @TerenceKearns 6 років тому

    Great coverage. Love this channel

  • @mindfusionmedia7984
    @mindfusionmedia7984 4 роки тому

    WOW - I knew Davinci was good, but this is next level!

  • @kaiooshin79
    @kaiooshin79 4 роки тому

    Great vid and so amazing what hidden features are packed in Resolve! Thanks!

  • @tokyosan1
    @tokyosan1 4 роки тому

    thank you ! this saved my morning and the whole project I'm working on

  • @arlinghk
    @arlinghk 5 років тому +1

    SUPER helpful! Thank you!!

  • @SteelTone
    @SteelTone 6 років тому

    Great tutorial as always, thanks !

  • @Marandal
    @Marandal 4 роки тому

    Hey man i just wanted to say thanks for helping out us newbies ❤️

  • @LeoTelles
    @LeoTelles 5 років тому

    hey man, you are awesome. I'm new to resolve and i was like "fuck, the titles here suck" but now you showed me a whole new level of customization right in the software. Thank you!

  • @istulover
    @istulover 5 років тому

    Omg! The matrix effect ! I will definetely do it for my intro ! Thaaaanks !

  • @johnbeck2020
    @johnbeck2020 5 років тому

    Great tutorial, thank you very much!

  • @aahumada7
    @aahumada7 6 років тому +2

    This is awesome! But I would love to see a lyric video tutorial with actual footage in the background. I want to try learning this over aftereffefts because I am already use to this program

  • @manu-zb
    @manu-zb Рік тому

    thanks for this great explaination

  • @deadmanswill
    @deadmanswill 4 роки тому

    Thanks this is really useful.

  • @LarryGibson
    @LarryGibson 6 років тому

    Jay awesome video ! I've learned so much from these. Can you do one on 3D text with different lighting effects.
    Thanks

  • @MEGATestberichte
    @MEGATestberichte 6 років тому +1

    Another geate one. Thx.

  • @TheWippsFamilyOfFive
    @TheWippsFamilyOfFive 6 років тому +1

    Is there a way to do this in 3d? I can't figure it out.

  • @thetrooper123
    @thetrooper123 3 роки тому

    thank you so much for this

  • @JulioRodriguez-js6vm
    @JulioRodriguez-js6vm 6 років тому

    thanks so much for the tutorials.

  • @love92935
    @love92935 5 років тому +2

    dopeeeeeeeeeeee, really helpful for me! to create new content :D thanks a lot !

  • @russbradbury5959
    @russbradbury5959 6 років тому

    Excellent tutorials

  • @daeuslamb8191
    @daeuslamb8191 3 роки тому

    mindblown

  • @dtll84
    @dtll84 6 років тому

    Thanks Jay. Do you use expresions? If so, may you explain the basics to find them useful?

  • @SewonSon
    @SewonSon 5 років тому

    Very NICE!!! Miss your tutorial. Are you making new tutorials anytime soon?

  • @pkstudionagar
    @pkstudionagar 5 років тому +1

    How to run a running text like a news channel in a video the vinci resolve

  • @7thperspective666
    @7thperspective666 4 роки тому

    Mind blown...

  • @VivaLaVidz
    @VivaLaVidz 5 років тому

    The Davinci God ! Jayaretv

  • @simbaoutdoor4964
    @simbaoutdoor4964 3 роки тому

    Nice Tutorial! Please more:)

  • @healthwise2105
    @healthwise2105 5 років тому

    Thank You.... thanks for the lesson...

  • @CarlosPerezFilms
    @CarlosPerezFilms 4 роки тому

    Hey man thanks so much for these. Can this be done on the Edit Tab? I just cant fine the modifiers tab on there (using the Text+).

  • @TheRedValue
    @TheRedValue 5 років тому

    Question: Can you put in the individual stylization and the follower modifier in at the same time?

  • @RiasatSalminSami
    @RiasatSalminSami 3 роки тому

    Anyway to transition from one font style to another without any simple fading? Like more advanced animations?

  • @pkstudionagar
    @pkstudionagar 5 років тому

    The vinci resolve how to add running tex left to write as news hedline..

  • @sanskarpandit5072
    @sanskarpandit5072 6 років тому

    amazing

  • @julianoangeliano8801
    @julianoangeliano8801 6 років тому +3

    Dude in your spare time ,,,can you please make a tutorial for Fusion 101 pleaseeeeeee explaining every feature button etc....

  • @pfarinella
    @pfarinella 4 роки тому

    Thanks for sharing, super cool tutorial. Question: how do you apply blending modes to tracked text in fusion???

    • @JayAreTV
      @JayAreTV  4 роки тому

      You would set the blend mode on the merge that has the text as the foreground.

    • @pfarinella
      @pfarinella 4 роки тому

      @@JayAreTV Thanks man, you are a star! I also found you can set the blend of the text as foreground object of the planar tracker node

  • @SewonSon
    @SewonSon 6 років тому

    First of all, thanks so much for the tutorials. I am watching almost every upload you made.
    Have a quick question and tried to find it but failed. I have a 34" ultra wide monitor and I could fill the entire monitor with output setting but could not find how to do it with DaVinci. Can you show how to export?

    • @JayAreTV
      @JayAreTV  6 років тому +1

      I'm not sure I understand the question. If you want your video to fill a ultra wide you would need to export a resolution that would match the aspect ratio.

  • @GopalaAsmr-sounds
    @GopalaAsmr-sounds 4 роки тому

    how to do that in a 3d text ? dosen't work for me, work only a 2d text. Thank you for your tutorials

  • @MeinVideoStudio
    @MeinVideoStudio 4 роки тому

    Rum as Backgroundvid. You are my MAAAAAN

  • @drde63
    @drde63 6 років тому +1

    Great video as always. Would it be possible for you to breakdown the text effect in the opening credits of Kong: Skull Island? Are you located on the east coast or west?

    • @JayAreTV
      @JayAreTV  6 років тому +1

      I haven't seen it. Is it on UA-cam somewhere? East.

    • @drde63
      @drde63 6 років тому

      JayAreTV Yes: ua-cam.com/video/SEQJQ6Tsxn0/v-deo.html
      Easy coast👍🏿

  • @John-stellar
    @John-stellar 5 років тому

    @jayaretv can you please tell me- how to add a follower and a character level styling in same node?

  • @VTPyzon
    @VTPyzon 5 років тому +1

    I'm having trouble getting the individual letters to hightlight/select (i.e. what you're doing around 3:31). I've tried right-clicking, left clicking, double-clicking, selecting text in modifier box, etc. I'm missing something basic here but can't stumble upon it. Any help is appreciated! Thx!

  • @Veniessubdentem
    @Veniessubdentem 5 років тому +12

    Usualy I love your tutorials, but I gave up on this one halfway through.

    • @Leatherfall
      @Leatherfall 5 років тому +2

      same bro

    • @Vampirate1782
      @Vampirate1782 3 роки тому +3

      He’s so hard to follow... usually I’ll be able to make sense and just make my own process after watching how he does it; but this one beyond frustrated me.

    • @pretschious
      @pretschious 3 роки тому +1

      I'm two minutes in and gave up. It's like he's doing 20 clicks and only explaining only one...

  • @TheBeeOBee
    @TheBeeOBee 6 років тому

    I've been binging in your vids all day. Learning so much. Thank you.

  • @margiesings
    @margiesings 5 років тому

    does anyone know if it's possible to animate text in davinci resolve lite? not the paid version, which it appears is what you're working with in this video. that'd really help me out!

  • @findingjoe
    @findingjoe 5 років тому +6

    Is there a way to preview the fonts in Resolve without clicking on each individual one.

    • @markcanonmedia
      @markcanonmedia 4 роки тому +1

      I hope someone responds. I've been wondering the same thing.

    • @sergiomartinez5946
      @sergiomartinez5946 4 роки тому

      Nope not right now. Really annoying right?

  • @daveward3029
    @daveward3029 6 років тому +9

    I just want to say that I really appreciate your content. I am learning so much following along with you. Thank you!

  • @EvenStarLoveAnanda
    @EvenStarLoveAnanda 4 роки тому

    How do I change the font size for the User interface, please.???
    I cant see the letters after install.

  • @dominikseitz
    @dominikseitz 5 років тому

    I realy apprecitate your tutorials, they helped me so much thank you. But from where do you know all this stuff? xD

    • @JayAreTV
      @JayAreTV  5 років тому

      I've just used the software for a few years.

  • @andreasleipelt2553
    @andreasleipelt2553 4 роки тому

    How can i add more than just one modifier?

  • @thanhtule6799
    @thanhtule6799 Рік тому

    That's such a huge complint. I rember watcNice tutorialng Nice tutorials videos/channel with hundreds of thousands of subs when I was just starting out

  • @juancoloradomellaman
    @juancoloradomellaman 5 років тому

    What menu/option do you select between 00:59 and 01:02?

  • @johnbeck2020
    @johnbeck2020 4 роки тому

    Jay, can I apply more than one followers to a text node? I can't find out. Please help.

  • @Nicollaos
    @Nicollaos 6 років тому

    Супер!

  • @3KGONE
    @3KGONE 6 років тому

    How can I buy Davinci Resolve 15 Fullversion? because all providers offer only Davinci Resolve 14. And if i buy Davinci Resolve 14 can i upgrade it free to 15?

    • @JayAreTV
      @JayAreTV  6 років тому

      DaVinci Resolve 15 isn't out yet. 15 is still in beta. Version updates have been free.

    • @3KGONE
      @3KGONE 6 років тому

      JayAreTV okay thanks.

  • @TousisDimitris
    @TousisDimitris 5 років тому

    I made my own logo, how can I put it on my edit (timeline) from fusion?

    • @JayAreTV
      @JayAreTV  5 років тому

      Add a media out node at the end of your node tree. After add the fusion comp to the timeline.

    • @TousisDimitris
      @TousisDimitris 5 років тому

      @@JayAreTV Thank you very much!

  • @MarkMash17
    @MarkMash17 4 роки тому

    This doesn't seem to work on 3d text? In the modifiers tab no attributes appear for the 3D text...

    • @MarkMash17
      @MarkMash17 4 роки тому

      with modifying each character

  • @viewbens
    @viewbens 5 років тому +2

    the video tutorial it self is so messy lots of connecting stuff etc

  • @jmalmsten
    @jmalmsten 4 роки тому +3

    Wait... There actually IS character level styling in Resolve?!
    Welll, that ticks off yet another thing I missed from Premiere. :D

  • @bartbrinkmann8101
    @bartbrinkmann8101 4 роки тому

    I love everything you're showing here, especially the text effects at about 9:00. As someone completely new to text effects, I'm finding it really hard to track everything that you're doing. For instance it took me a while to figure out that I needed to have the merge node visible, and I had a lot of trouble seeing how you were selecting a single character because things were jumping around so much. I'm really glad you've covered this though, it's very helpful.

  • @OnlySuper
    @OnlySuper 6 років тому

    I can't see fusion tab

    • @JayAreTV
      @JayAreTV  6 років тому

      You need DaVinci Resolve 15 or newer

    • @OnlySuper
      @OnlySuper 6 років тому

      JayAreTV could you make a update tutorial? I've been watching a few of your videos and their awesome!

    • @vigdu1246
      @vigdu1246 6 років тому

      Just go on Blackmagix site and download it man. If you can't do that I can upload to mega and send'ya an link

  • @PenRippyJr
    @PenRippyJr 5 років тому

    yo Jay dog you're the MAN
    edit: i vote you make more videos on text just like this but experiment with more features! thanks!!!

  • @lorenzmiguelbermudez6548
    @lorenzmiguelbermudez6548 6 років тому

    And it's so sad that it is not available in the free version.. :'(

    • @JayAreTV
      @JayAreTV  6 років тому

      But it is.

    • @lorenzmiguelbermudez6548
      @lorenzmiguelbermudez6548 6 років тому

      Yah yah, sorry I thought it's not, thanks man!
      You're the best tutor for davinci resolve, hope you still make more tutorial videos in fusion.
      Im an Asian so I cant afford your products, im also a beginner in terms of video edting soim just going to wait for your tutorials!
      Good Job Man!.. The Best tutor for the Davinci Resolve!

  • @brandonse167
    @brandonse167 4 роки тому

    It wont let me select the text

    • @JayAreTV
      @JayAreTV  4 роки тому

      Make sure you have the text+ node selected in the node window

    • @brandonse167
      @brandonse167 4 роки тому

      @@JayAreTV you know what, I read through the manual and I think either it's updated so the bounding boxes don't show the same on every system (kinda like how when you move a character in manual kerning mode, some systems won't live update until you drop the character) or now they just don't have them on version 16. I just get a cursor and it won't let me select multiple characters through the viewer no matter what settings I put in on the top left of the window. But thanks for the video, you are one of the only sources I trust to talk about resolve! Lol

  • @GamerKittyEuphoric
    @GamerKittyEuphoric 6 місяців тому

    I wish people would turn off their facecam when they are doing tutorials.

  • @randallburgess6393
    @randallburgess6393 5 років тому +1

    You are well versed on the software but you move around much too fast when showing a task. People can’t tell where and what you’re clicking on. Please slow down. Don’t assume we know where you are going and why you selected that menu.

  • @alphaandomegaproductions5073
    @alphaandomegaproductions5073 5 років тому

    I know some people already said this but, watch this yourself and see if you can follow it. Half way through, when you start talking about masking the text, this video is impossible to follow. I appreciate you doing this, and I mean that, but if your goal is to teach others, you need to be more specific in your explanations.

  • @hausofone
    @hausofone 5 років тому

    Yes, you know your stuff. But please, slow down some of us are beginners and not on par with you.

  • @zacchew4232
    @zacchew4232 4 роки тому

    Way out of my level

  • @rodrodriguez7032
    @rodrodriguez7032 4 роки тому +2

    dude slow down.... you do not even explain in detail what you're doing.

  • @GauravSaharanELN
    @GauravSaharanELN 5 років тому +1

    please try to explain every step instead of doing bunch of stuff in a jiff

  • @gustavop5706
    @gustavop5706 6 років тому +1

    excellent tutorials