You're just incredible! Thank you so much for this content. I've never used Da Vinci before and I was able to follow these steps perfectly and make my own intro. Really, thx! 🇧🇷
Привет. Всё супер. Видео урок очень хороший. А подскажите, я всё сделал как у вас в видео, но у меня в правом экране не появилось изображение лого, в чём может быть причина? Спасибо вам огромное.
Thank you so much for this, this tutorial helped me out a lot! Straight to the point and very simple! This is what I have been looking for, for a while!
Hello, this is a really great tutorial! Quick question: I'd like to keyframe an animation like this so that it starts dissolving slowly before it speeds up. Which variables should I be keyframing? There's a lot going on with these nodes that I don't really understand well.
Thank you. You can actually keyframe the velocity parameter in pimage emitter node and increase it over time, that is the soeed of the particles moving. Hope this would help 😊
@@salmannafeesacademy Hmm, I tried keyframing the velocity -- starting it at 0 and then adding a keyframe to gradually increase it, but now I'm not seeing any dissolve at all. Is there anything else that I would also need to change if I'm starting the velocity at 0? Thank you again for such a quick reply!
@@bensyversen i think you should not keep it at zero in start, keep it in the middle somewhere according to the tutorial and then drag it up to something more later on
you,re bangladeshi myboy...it,s very easy to catch and understand your english accent. i understood all of your speech. thank you for your tutorial. cz sometimes i face many problems watching usa youtubers and sometimes it hard to catch their voices.thanks
I am glad you understand my videos. I try to put out good content after reaearch for my small subscriber family. :-) I am from Pakistan btw, and love my Bangladeshi friends. You guys rock 😍
In this tutorial the particles move towards the screen from the actual logo. If one wants to start from particles coming to the screen and ending with the still logo, what would be the easy way to turn it around?
Very clear explanation and a lovely simple use of Fusion for us Fusion virgins! Thank you for doing this. It's an effect I was hoping to be able to create. But I do have 3 questions. Will lengthening and shortening the Fusion composition retain all the settings? I want to reverse the effect to a cloud of particles coming together to create the final logo, is there a way within fusion to do this? Is the alpha value of the particles animatable so they become less transparent as the logo comes together (in my reversed scenario)?
Thanks, yes it will retain the settings after lengthening , but it's always a good idea to start of with a desired length of fusion comp. Reversing the effect could be done with a retime node at the end. Or an easy way of reversing this whole thing is to make a compound clip of this fusion composition after completing the steps in the video and just reverse that in the edit page. About the third question , I am not sure what you meant to say.
Thanks for this great tutorial, however could you please share as to how can I convert this effect into a Macro so that I can directly use it on the Edit page. Thank you
Great explanation. First time on the fusion page and I was able to follow completely. Question: I need to use this logo dissolve on many short videos. Is there a way to save this so I can just pop it when I need it?
I am glad you liked it. You may drag the fusion composition into the power bins in the media pool and you'll have it in the media pool in each project , alternatively you may export it out and then use it as a clip in all projects.
Great video! Could you teach me how to create an animation where a logo starts to melt over lava, then burns, and finally turns into ashes? I would like to know the steps to achieve this effect.
Hello and thanks soo much for the video..... how do i make my logo zoom into the screen as particles then come together into one solid logo........ don't know if you understand me .... thank you
Thank you :-) Yes this same techmiqur can be applied in a 3D worksapce of nodes as well with 3D particles, or you cam simply remder out the 3d logo and aplly this effect im 2d workspace.
Thank you for this really great tutorial? If I can allow myself to suggest a subject to you it would be "how to integrate a large 3D model (like a castle in OBJ or STL) into a video" Thanking you in advance👍
Great suggestion! i just uploaded a video which explains a similar concept using 3D text , but you may also import any 3d object in it, the process is going to be the same. here's the link : ua-cam.com/video/mk-cbUUdYFU/v-deo.html
Thank you very much for this video, it’s great!! Do you know what the maximum weight of the 3D model is, because I would like to integrate a model of more than 1 gigabyte? Thank you again for all these super interesting videos and look forward to the next video.👍
@@mwanzacreation thank you, the easiest way would be just follow the same instructions. At the end in the edit page turn all the clips used into a compound clip and just reverse it's speed 😉
hi, it was worth to watch and follow this channel.. You said by using same nodes we can replace any logo ? can we do image as well ? Pls guide ? as i tried but not happening 😔
Thanks. Yes an image and a logo in essense are just same , you would just need to readjust the sizing. And in this case the logo was a PNG , with transparent background. So you may want to make some parts of the image transparent to give it an even better effect like the logo animation we did.
Follow the complete tutorial guidlines from start to finish and at the end select all the layers in the edit page and right click and select compound clip. Then just reverse the compound clip using the retime controls by pressing control or command R amd using the drop down menue that shows up. There's going to be an option called reverse segment
@@salmannafeesacademy Hi, thanks for that, however did try this and it lags a bit., maybe my Ipad can't handle compound clips too well. Sooo, I came up with easier solution. I just exported original clip to mp4, reimported to timeline and then just reversed playback. Exported that to mp4 and now have 2 clips for begin and end. Brilliant. Thanks for taking time to reply.
So cool! I’ve been hesitant to get into the fusion tab until now. This is the first time I’ve done anything in fusion! I’m stoked that I found your channel!
Hello, thks for usefull vidéo. Is it possible to transform the initial image (image A) into particles, then leave the particles moving (for a period of time) and finish them on an image B? Or should we create two videos (image to particles) and invert one, and make an additive transition between the two?
hey amazing tutorial, I don't know why my media out is 3000x3000, that's the size of my logo, but I can't fix the size of the output and the particles just show up in this square size. Please help :(
Hey thanks, you may have actually started of from a logo file in tge dit page and then went to fusion so it took that as your composition settings. Try starting with bringing a fusion composition in the timeline and then go to fusion and import your logo. It will solve the problem hopefully :-)
4070ti is a powerfull graphics card and i am pretty sure it is going to give you a considerably good preview playback when using particles. But Particle systems in resolve are generally very slow on even the high emd systems. So the best solution for that is keeping your render cache on smart.
I need your help, I did exactly what you asked for, but I am having a problem the PNG or any photo text I am using in the media one. It is in great quality, but after the render is complete, the quality is reduced. How do I fix it? Please help
i tried this on my pc, and the davinci resolve 19 public beta is just crashing whenever i try to watch it or do something with it.( i7 14700k, rtx 4070 super) what to do? is there any settings I'm missing or something?
You have a powerful system , it shouldn't have done that. Probably there is a problem in the beta version or the logo file that you are using might be of a very large resolution .
@@salmannafeesacademy the png fils was 300 pixel, and i dropped the timeline proxy resolution to quarter, smart render cache, still resolve was crashing, so I had to quit the particle effect. I felt so dissapointed.
Just export it using the deliver page and select quicktime in format and prores4444 in codec, then you will get a check box for alpha output. Check it and export. The file will be with transparent background.
Is there also a possibility to create a logo or text from particles so that they are pulled towars it like to a magnet? In all the tutorials I only se the particles flying away from a logo or text to dissolve it instead of creating it. And when you use 'reveal image' the particles still keep flying away, which is not logical and counter intuitive.
@@1MarcVD I suppose you can use the same technique and reverse the whole thing in the edit page , the direction of the particles can be controlled in the velocity x y and z .
@@salmannafeesacademy I have found already a solution. If you want to create text with the particles flying towards the text, you can do that by turning it into a compound clip and reverse the direction of the clip into -100%, reverse the clip actually. Then all the particles wil fly towards the text or image.
I've an i7 3050ti, 16gigs of ram but these effects just take forever to render, i've tried everything like render cache, optimiztion even drivers are in studio mode still, any help?
3050ti is a powerful card amd can easily handle this effect. Probably your software is not recognising the card properly. Probably it could be a windows issue, because if everything is fine it could never cause that problem. Or try playong over that clip sevearal times in the edit page it could start the force render.
Proof that keeping it simple is the way. to go. Thanks for the excellent, clear explanation!
Glad it was helpful!
So many people do not make it as simple and clear as you just did. So many thanks.
I am glad you liked it 😊
Thank you. This was exactly the lesson I needed for a project I'm working on.
🙂
a 100% helpfull´n explanatory tutorial even for catalan speakers, thx a lot
❤️
thanks very clear and easy to follow, much appreciated!
@@zestful713 😊
You're just incredible! Thank you so much for this content. I've never used Da Vinci before and I was able to follow these steps perfectly and make my own intro. Really, thx! 🇧🇷
I am glad it was helpful 😃
Привет. Всё супер. Видео урок очень хороший. А подскажите, я всё сделал как у вас в видео, но у меня в правом экране не появилось изображение лого, в чём может быть причина? Спасибо вам огромное.
Thanks , please check if your media out is previewed in the viewer. Select the viewer and press 1 or 2 to preview in the left or right viewer.
Wow. This is a great tutorial. Thank you for sharing this.
I am glad it was helpful :)
Thank you so much for this, this tutorial helped me out a lot! Straight to the point and very simple! This is what I have been looking for, for a while!
you are welcome :-)
I like both the effect and showing the shortcuts! Thank you.
Glad you liked it
Great tutorial, clear and to the point.
I am glad it was helpful :-)
Too Cool! Thanks so much, Great Tutorial.
Thank you :-)
Thank you man this is so amazing and easy to understand
I am glad it was helpful :-)
Hello, this is a really great tutorial! Quick question: I'd like to keyframe an animation like this so that it starts dissolving slowly before it speeds up. Which variables should I be keyframing?
There's a lot going on with these nodes that I don't really understand well.
Thank you. You can actually keyframe the velocity parameter in pimage emitter node and increase it over time, that is the soeed of the particles moving. Hope this would help 😊
@@salmannafeesacademy great thank you!
@@salmannafeesacademy Hmm, I tried keyframing the velocity -- starting it at 0 and then adding a keyframe to gradually increase it, but now I'm not seeing any dissolve at all. Is there anything else that I would also need to change if I'm starting the velocity at 0? Thank you again for such a quick reply!
@@bensyversen i think you should not keep it at zero in start, keep it in the middle somewhere according to the tutorial and then drag it up to something more later on
@@salmannafeesacademy Great, thank you!
you,re bangladeshi myboy...it,s very easy to catch and understand your english accent. i understood all of your speech. thank you for your tutorial. cz sometimes i face many problems watching usa youtubers and sometimes it hard to catch their voices.thanks
I am glad you understand my videos. I try to put out good content after reaearch for my small subscriber family. :-)
I am from Pakistan btw, and love my Bangladeshi friends. You guys rock 😍
thank you SO MUCH for such an easy to follow tutorial. YOU ROCK
Thanks for watching!
Made my first DR project thanks to you bro.
I am glad it was helpful 😄
Thank you so much, so easy to follow
😃
Fantastic tutorial look forward to trying this aspect DR, I'm a new DR user - outstanding tutorial thank you!!👍
You are welcome 😊, I am glad it was helful. Best of luck
Great video!
Thanks :-)
Why r u underrated man 😮
@@ManishRaj-ky6nw I don't even know bro 😁
Great tutorial! Thank you!
I am glad it was helpful 😊
👏 Great tutorial. Thanks
❤️
In this tutorial the particles move towards the screen from the actual logo. If one wants to start from particles coming to the screen and ending with the still logo, what would be the easy way to turn it around?
Well the easiest way to do that would be to follow the same instructions and at the end in the edit page reverse it
@@salmannafeesacademyhow do we do that it won’t let me go the edit clip speed route
Really great tutorial. I have just used it now. Thank you!
I am glad it was helpful :-)
Very clear explanation and a lovely simple use of Fusion for us Fusion virgins! Thank you for doing this. It's an effect I was hoping to be able to create. But I do have 3 questions. Will lengthening and shortening the Fusion composition retain all the settings? I want to reverse the effect to a cloud of particles coming together to create the final logo, is there a way within fusion to do this? Is the alpha value of the particles animatable so they become less transparent as the logo comes together (in my reversed scenario)?
Thanks, yes it will retain the settings after lengthening , but it's always a good idea to start of with a desired length of fusion comp. Reversing the effect could be done with a retime node at the end. Or an easy way of reversing this whole thing is to make a compound clip of this fusion composition after completing the steps in the video and just reverse that in the edit page. About the third question , I am not sure what you meant to say.
Awesome tutorial. I can sure you this one!!!!
😊
Exelent tutorial Thanks
I am glad it was helpful :-)
It's a very good video... Thank you for sharing 🎉
Thanks for visiting
Good to know. I've been doing this in AE in the past.
Glad that you found it useful
Very helpful. Thank you!
You're welcome!
Amazing tutorial, thanks. Could you please do a sweetheart with particles also particle trails. Thanks
Great suggestion!
Thanks. Super nice!👍
😁
Thanks for this great tutorial, however could you please share as to how can I convert this effect into a Macro so that I can directly use it on the Edit page. Thank you
I am glad, it was helpful. I really appriciate you reaching out, please watch my video on creating macros.
Excellent tutorial!
I am glad it was helpful :-)
Really great thank you
:-)
Good tutorial. 👍
Thank you! Cheers!
Great explanation. First time on the fusion page and I was able to follow completely. Question: I need to use this logo dissolve on many short videos. Is there a way to save this so I can just pop it when I need it?
I am glad you liked it. You may drag the fusion composition into the power bins in the media pool and you'll have it in the media pool in each project , alternatively you may export it out and then use it as a clip in all projects.
Great video! Could you teach me how to create an animation where a logo starts to melt over lava, then burns, and finally turns into ashes? I would like to know the steps to achieve this effect.
Hey thanks ,That seems like a custom request, I haven't tried it, but surely will try to make something like that 😄
How do I reverse it, so the particles come together and Form the Logo?? The rest was very helpful, thank you.
@@juliajuhu just make a compound clip of the clips in timeline at the end , and reverse that 😃
i set everything as you did but i can't see anything from the edit, where can i set the visibility of my video output?
muchas gracias muy bueno
Hello and thanks soo much for the video..... how do i make my logo zoom into the screen as particles then come together into one solid logo........ don't know if you understand me .... thank you
Just reverse the whole thing in the edit page
This is a great video. Is there any way that you can keep the fusion composition for use in other videos? Thanks for the video and advice by the way
I am glad it was helpful, yes i think you can put that composition in the power bins in the media panel on edit page.
Great stuff. 👏🏽👏🏽👏🏽
Can this be applied to an animated 3D logo in Davinci Resolve?
Thank you :-) Yes this same techmiqur can be applied in a 3D worksapce of nodes as well with 3D particles, or you cam simply remder out the 3d logo and aplly this effect im 2d workspace.
Thank you for this really great tutorial?
If I can allow myself to suggest a subject to you it would be "how to integrate a large 3D model (like a castle in OBJ or STL) into a video"
Thanking you in advance👍
Great suggestion! i just uploaded a video which explains a similar concept using 3D text , but you may also import any 3d object in it, the process is going to be the same. here's the link : ua-cam.com/video/mk-cbUUdYFU/v-deo.html
Thank you very much for this video, it’s great!!
Do you know what the maximum weight of the 3D model is, because I would like to integrate a model of more than 1 gigabyte?
Thank you again for all these super interesting videos and look forward to the next video.👍
@@absdrones1988 you are welcome. Well about the size of the file i am not sure. You may import it and then see if it works
thanks again👍@@salmannafeesacademy
I love this tutorial. I have a quick question. How do you reverse the effect so it starts from the particle to become a solid?
@@mwanzacreation thank you, the easiest way would be just follow the same instructions. At the end in the edit page turn all the clips used into a compound clip and just reverse it's speed 😉
@@salmannafeesacademy thank you so much! It worked. I’m pretty new with Davinci transferring from premiere and you video was very helpful!
hi, it was worth to watch and follow this channel.. You said by using same nodes we can replace any logo ? can we do image as well ? Pls guide ? as i tried but not happening 😔
Thanks. Yes an image and a logo in essense are just same , you would just need to readjust the sizing. And in this case the logo was a PNG , with transparent background. So you may want to make some parts of the image transparent to give it an even better effect like the logo animation we did.
@@salmannafeesacademy yes done.
Do u take fusion or davinci online tutorials.?
@@YELLOWBOXINDIA I make tutorials for color , edit and fusion all
This worked so well! How do you reverse the effect? Like particles come in and form the image vs image flying away?
Thanks, just reverse the whole thing in the edit page 😁
Merci, simple et efficace !
This is super for opening, how can I reverse so that can also be an ending
Follow the complete tutorial guidlines from start to finish and at the end select all the layers in the edit page and right click and select compound clip. Then just reverse the compound clip using the retime controls by pressing control or command R amd using the drop down menue that shows up. There's going to be an option called reverse segment
@@salmannafeesacademy Hi, thanks for that, however did try this and it lags a bit., maybe my Ipad can't handle compound clips too well. Sooo, I came up with easier solution. I just exported original clip to mp4, reimported to timeline and then just reversed playback. Exported that to mp4 and now have 2 clips for begin and end. Brilliant. Thanks for taking time to reply.
I wonder if it's possible to: add randomness to the particles size and opacity and add motion blur.
Yes that could be added using the settings or expressions.
How do you make the logo flow around in a circle like liquid instead of flying off screen?
You'll have to work around with the velocity and tge shaoe of particles and number to get it act like water.
Great
Thank you
brilliant and how to implement this into a video edit? just started resolve 😊
You may make an intro for your video using your logo
Thanks for a nice and easy tutorial.
You are welcome:-)
Excellent tutorial!
Can you do the same effect on a title instead of a logo?
Thank you! yes the same effect can be achieved with the text but that would require the Pemmiter node , instead of pImageemitter node.
@@salmannafeesacademy ok, thank you, i will try it
Awesome Tutorial , Thank you 💯‼️
@@UnK1999 😊
So cool! I’ve been hesitant to get into the fusion tab until now. This is the first time I’ve done anything in fusion! I’m stoked that I found your channel!
Hello, thks for usefull vidéo.
Is it possible to transform the initial image (image A) into particles, then leave the particles moving (for a period of time) and finish them on an image B?
Or should we create two videos (image to particles) and invert one, and make an additive transition between the two?
Yes that's possible but that would require a different procedure in term of nodes.
@@salmannafeesacademy if you have the time, could you make this tutorial. That s can be a good tutorial for a beautiful fade in fade out images. 😉
@@LittleGorille Yea, please do, that would be awesome..... that concept intrigues me about creative possibilities for intros and transitions
Any one's logo not.show up in the right media screen very well
Thank you!
Thanks you very much!
🙂
Excellent tutorial. Actually this is exactly the opposite of what I need. I need to turn particles into a logo, any quick suggestions?
Thanks, just do what is done in the video. Then in the end make a compound clip of everything in Edit page and finally reverse the compound clip
@@salmannafeesacademy Much grateful for the prompt reply. I'll do as suggested.
my screen is still covered with particles, not like an open starfiled like yours. How?
Probably you might be missing a step
hey amazing tutorial, I don't know why my media out is 3000x3000, that's the size of my logo, but I can't fix the size of the output and the particles just show up in this square size. Please help :(
Hey thanks, you may have actually started of from a logo file in tge dit page and then went to fusion so it took that as your composition settings. Try starting with bringing a fusion composition in the timeline and then go to fusion and import your logo. It will solve the problem hopefully :-)
Excuse me teacher. Can 4070ti afford smooth video preview on 4k particle affect ?
4070ti is a powerfull graphics card and i am pretty sure it is going to give you a considerably good preview playback when using particles. But Particle systems in resolve are generally very slow on even the high emd systems. So the best solution for that is keeping your render cache on smart.
how to duplicate that fusion clip so that it works for every logo.whats the shortcut?
@@Titanflame007 just copy and paste in the edit timeline
THANKS A LOT.
Glad you liked it :-)
My time line is to 235! any idea? Thanks
hello, what mac do you use?
For this video i was using mac mini m2 16 gb
@@salmannafeesacademy thank you
Can you do the same thing in premiere pro?
@@Fea_4Lgaming unfortunately not. You'll have to go to After effects to make something like this.
How can you put a background color or image behind the scene ? If it's only black doens't look that good.
Cheers
The background is already transparent the way it is created so you can just put anything in the layer below in the edit page 😊
I need your help, I did exactly what you asked for, but I am having a problem the PNG or any photo text I am using in the media one. It is in great quality, but after the render is complete, the quality is reduced. How do I fix it? Please help
Probably check if your cache Is on while rendering, you need to turn it to none before rendering
i tried this on my pc, and the davinci resolve 19 public beta is just crashing whenever i try to watch it or do something with it.( i7 14700k, rtx 4070 super)
what to do? is there any settings I'm missing or something?
You have a powerful system , it shouldn't have done that. Probably there is a problem in the beta version or the logo file that you are using might be of a very large resolution .
@@salmannafeesacademy the png fils was 300 pixel, and i dropped the timeline proxy resolution to quarter, smart render cache, still resolve was crashing, so I had to quit the particle effect. I felt so dissapointed.
@@saimaljim oh that's sad to hear
great! how do i save it with transparent background??
Just export it using the deliver page and select quicktime in format and prores4444 in codec, then you will get a check box for alpha output. Check it and export. The file will be with transparent background.
Is there also a possibility to create a logo or text from particles so that they are pulled towars it like to a magnet? In all the tutorials I only se the particles flying away from a logo or text to dissolve it instead of creating it. And when you use 'reveal image' the particles still keep flying away, which is not logical and counter intuitive.
@@1MarcVD I suppose you can use the same technique and reverse the whole thing in the edit page , the direction of the particles can be controlled in the velocity x y and z .
@@salmannafeesacademy I have found already a solution. If you want to create text with the particles flying towards the text, you can do that by turning it into a compound clip and reverse the direction of the clip into -100%, reverse the clip actually. Then all the particles wil fly towards the text or image.
@@1MarcVD exactly that's what I was talking about. It's great you figured out yourself ♥️
Can you make an MGM lion logo and add your own name to it please
thank you so much
You're welcome!
I've an i7 3050ti, 16gigs of ram but these effects just take forever to render, i've tried everything like render cache, optimiztion even drivers are in studio mode still, any help?
3050ti is a powerful card amd can easily handle this effect. Probably your software is not recognising the card properly. Probably it could be a windows issue, because if everything is fine it could never cause that problem. Or try playong over that clip sevearal times in the edit page it could start the force render.
thanks
when i going back to fusion i dont see my animation node there. why?
Check if the files are not unlinked ?
Thanks.
Bro In my software this is not working
This is wierd, what problem are you facing?
❤❤❤❤👌👌👍👍
Is it pc or mac my pc is almost bomb 😅😂
It's Mac 😄
Exactly what I needed, if ever meet you gotta drink on me, and for now a subsription and a like, thank you!
You are welcome. :-) stay blessed
Its not even render in mac air 15inch 256/16ram
Well it's a heavy effect , it mostly work on m1 devices and devices released after that.
4k 60 fps my system 😶🌫️😶🌫️😶🌫️
I can imagine that 😱😜
Thank you!
Great video!
Thanks 👍
Very useful thank you.
Glad it was helpful!🙂