*Now had one we like to have a live PTO it had an eagle claw hitch on it and we pull a 7 foot flail mower with it but the front end was so late. We took a 41 Chevy front bumper poured concrete oh just to try to hold the front end down but boy she would pop with it. We converted hand clutch over to a foot rocker clutch and we custom mode up here in the middle of Iowa for years. I see they take them tractors and put a diesel engine in them and runner front axle off the belt drive and I used them in the rice fields. Good tractor. I love it. Have fun be safe. May God bless.
Some unusual views - oil flowing into the pan and the crankcase in action as it built first oil pressure. Nice that it even has a wet clutch. Glad you're able to keep it inside.
i was built in 1949 so be careful what you say! i have a McCormack Deering 10-20 that is complete, just in pieces, im not a mechanic but you have given me hope!
We mainly used fords on the farm and for the agricultural contracting but we did have two Case international 1256 xl and 1056 xl the straight six engine sounded marvellous 🇬🇧🇮🇪.
Rudy @rebuiltmags5832 might be able to help with the mag if you ever need! Loved watching the ole Case come back. Not many people like messing with them relative to the more popular tractors of the era. Glad to see someone else who likes them!
Say Randy, ya'll need to send that magneto to someone with a re-magnetizer to make that thing have hot blue spark. If Ya'll pulled it around then it won't magnetize. With an electrical coil the magnets can be made hot again. Without that this engine won't run. With as hard as it was seized it may have bad blowby. Sometimes they won't.
Most of today’s folks think you gotta “spin” an engine to start it and they would be mostly correct. They have never dealt with magnetos with impulse springs. It does not matter if it’s a 502 cubic inch Deere-D model, an Allis Chalmers WD, CA, McCormick Deering or a Piper J-3 Cub. If you got fuel and fire and flip one piston it’s running. BAM!
People are always surprised how effortlessly my old crank start tractors start. (Even some that have their own) 1/4 turns off the crank is all they need. No need to try and make a full revolution.
Grandpa told me several stories about a case LA. They could really pull
*Now had one we like to have a live PTO it had an eagle claw hitch on it and we pull a 7 foot flail mower with it but the front end was so late. We took a 41 Chevy front bumper poured concrete oh just to try to hold the front end down but boy she would pop with it. We converted hand clutch over to a foot rocker clutch and we custom mode up here in the middle of Iowa for years. I see they take them tractors and put a diesel engine in them and runner front axle off the belt drive and I used them in the rice fields. Good tractor. I love it. Have fun be safe. May God bless.
👌 clean ! great Job. 👋👋 fom Germany 🇩🇪
Some unusual views - oil flowing into the pan and the crankcase in action as it built first oil pressure. Nice that it even has a wet clutch. Glad you're able to keep it inside.
This was a fun series to watch! Thanks for persevering and thanks for sharing!!
Thanks for watching! Stay tuned! There will definitely be more in the future!
Well done! That's a great tractor. I am so glad you brought it back to life. I think it's a first class candidate for a full restoration.
good job brother. thanks for giving that mean ole beast the love that it deserves. 👍
i was built in 1949 so be careful what you say! i have a McCormack Deering 10-20 that is complete, just in pieces, im not a mechanic but you have given me hope!
I'm glad I have given you some motivation! Those 10-20s are neat tractors, I have owned two in the past.
Nice tractor I think you could take it and get some work done. I find all your videos interesting. Thanks Randy
Great job
We love our case tractors in Rollag MN
We mainly used fords on the farm and for the agricultural contracting but we did have two Case international 1256 xl and 1056 xl the straight six engine sounded marvellous 🇬🇧🇮🇪.
Good job and nice work.
Might could even warrant a new starter , nice job
Great video
Rudy @rebuiltmags5832 might be able to help with the mag if you ever need!
Loved watching the ole Case come back. Not many people like messing with them relative to the more popular tractors of the era. Glad to see someone else who likes them!
She is a sweet old tractor. I hope we can see her pulling in the field
Great job Randy!!
Great video sir
Job well done
Nice job, well done lovely tractor.
Say Randy, ya'll need to send that magneto to someone with a re-magnetizer to make that thing have hot blue spark. If Ya'll pulled it around then it won't magnetize. With an electrical coil the magnets can be made hot again. Without that this engine won't run. With as hard as it was seized it may have bad blowby. Sometimes they won't.
the old girl sounds pretty good
That was a good video. It looks like a heavy old tractor. Wonder how many plows it would pull.
Thanks
I believe they were rated at 4-5 bottoms.
Late LA, steel platform
IT RUNs better than i thought it would BUT I would do a valve job and RINGs thanks
On kyllä komee traktori👍 paljon painaa kg ja hevosvoimaa💪😊
Most of today’s folks think you gotta “spin” an engine to start it and they would be mostly correct. They have never dealt with magnetos with impulse springs. It does not matter if it’s a 502 cubic inch Deere-D model, an Allis Chalmers WD, CA, McCormick Deering or a Piper J-3 Cub. If you got fuel and fire and flip one piston it’s running. BAM!
People are always surprised how effortlessly my old crank start tractors start. (Even some that have their own) 1/4 turns off the crank is all they need. No need to try and make a full revolution.
@@Randys_Relics Trying to make a full revolution of the crank is how people get hurt when it kicks back.
Mjög skemmtilegt til hamingju. Translet englis :)
Where is dist rotor?good luck
Put a eight volt battery in it and it will turn over faster and won't burn up the six volt system
The 6V generator will typically struggle to keep the battery up unless you can get it to put out about 9-10V
doesnt the engine sound good!
Man that case is beautiful pressure, wash it and clearcoat it leave that beautiful patina