Several hp inkjets remember the last 3 or more cartridges and keep complaining that the cartridge is empty by its estimation process. Keep 4 or more cartridges around and install 3 or more old ones till you add the "NEW" one. it will see the last couple and think it hasnt seen the "NEW" one before.
This video was the only one who helped me. Follow all the step by step that comes with the recharge and nothing. Thank you so much for sharing this discovery
That vacuum part is amazing, thank you so much for that! I couldn't get my yellow, or cyan, to come out, I knew I needed to suction them but didn't know how without the tool, this worked perfectly the first time!
Thank you, it worked. I ordered my ink from China, it took approx 8 weeks to arrive. To my surprise it still worked, because I ordered when my cartridge it was completely dry. I did take a paper towel and dampened the end where the ink comes out, used about 7 ml, then I put the cartridge in and after a couple of copies I showed my husband who said the better copy is the one I printed.
Thank you for your video is answered prayer to this frustration I have had with my printer costing me so much money on the cartridges. I learned the vacuuming part new today from your video. Thanks for sharing. Amby
Great video. I also bought these inks, and I'm really happy with the quality of the print produced from the refilled cartridges. As with other reviewers, really appreciate the tip on using a vacuum cleaner to prime the cartridges, especially as no priming tool is provided with the kit.
I bought my printer for $20 during Thanksgiving 5 years before. When I checked for a refill, it cost double the price of my printer. So I didn't replace it for more than 4 years since I took all my printouts from the office. During the lock down I had no other option. Since original refills were super costly I thought of buying a new printer. But none of the budget printers were available in stock near my place. So I ended up searching for the third party ink replacement. I found your video. I was not confident but thought of giving it a try since the refill cost was very reasonable. To my surprise, it worked like a charm on my five-year-old printer. But it didn't show ink levels and I get a warning whenever I restart the printer. But I can live without ink levels. Thank you again for sharing.
For the coloured the process is the same but unlike the black each colour must go into its perspective holes.....the red that is in the middle goes into the top hole, the blue and yellow goes into whichever sides they are found on.
Tips & Tricks: 1. Wear gloves 2. Make a work space with something you don't mind getting ink on. I used paper grocery bag. I would use something you can throw away. Unless you are hand washing after. I would not put it in the washing machine unless you don't care about ink inside your washer, dryer and other things you are washing. 3. Wear gloves. 4. Wear an apron. 5. Have rubbing alcohol on hand. Near by. At least, it's what I used when I got it on my light beige carpet. 😤😁 6. Have extra paper towels already off the roll ready to use. 7. Wear gloves. 8. If you use the vacuum method, only do 1 or 2 second bursts. Trust me. 9. Don't open the bottle all the way, just poke needle through the foil, it will be better later when you need to tip the bottle some. 10. Wear gloves. 11. If using plastic throw away gloves you can take an unused pair and sips the tips off the fingers to put over the ink bottle and then put the lid back on. I know it's not necessary but it has helped me. 12. Tighten the caps closed. Check again before storing. 13. Did I say wear gloves?? Trust me. You're not that good. I am and I still need gloves. JK 😛 Just get some gloves will ya.. I say trust me but you don't know me so, there's that but I will say... alcohol took it out of my carpet. It didn't take it off my skin...
Everything that you stated in your video was simply brilliant!!! The trick with the vacuum to get the ink flowing was awesome! I did everything that you said, including the vacuum trick, and it worked like a charm as I got my ink cartridge working again. I also liked your advice to fill the ink cartridge BEFORE it runs out and the printer starts detecting and rejecting it to be used again. Yes, these HP cartridges are a pain and a money grabber - they just put all these obstacles in front of a person so that he/she gives up and buys a new cartridge which can get expensive over time. I agree, the best saying of your video - "Stick it to the Man!" I love it! Thank you so much for posting this video that just promotes common sense in order to help others. I can't thank you enough. Your video was well worth it - I Liked it and I Subscribed! Excellent job! Paul.
You’re video was the only one that actually Helped me. NowI have a question.. is refilling cartridges good for printing other things besides documents? I’ve tried printing stickers and the ink tends to be textured doesn’t come out smooth, you see lines running through it I’m not sure what I did wrong or if I did anything wrong I clean the cartridges but the problem still occurs. Could it be the ink ?
Very cool do you know about using tape to cover the e contacts on a HP 63 BLK cartridge to reset the printer ink level? If so please let me know... Thank you in advance ✌️😎👍
I've long thought that this could be done but haven't seen it done. Thanks for sharing! The cost of ink for printers is above and beyond ridiculous for how long it last.
I did a refill on an HP 2710 all in one printer. The first one I did was black 63XL I pieced the hole as was suggested and the cartridge was not recognized and the printer would not print. I suspect the label has information on it as it is foil. The second one I did was 63XL tricolor. I used a heatgun but a blow dryer might work and I carefully pealed off the label with a razor blade. I did the refills really loading them with ink and it worked and still working for 2 months. The third time I did a black 63 non-xl. I cut the bottom label corner accidently while removing the label. The cartridge would not stop dripping because when I put the label back on air was getting sucked through the cut label at the top. I sealed it with clear silicone sealant and a piece of shipping label. The label was porous so I had to coat the label surface with silicone sealant as well. I popped it back in and it works great. If the foil label won't lay flat I used Scotch Super 77 adhesive which will allow me to remove the label again next time. For black you only need to remove the label half way. For color remove a third of the label at the top and a third at the bottom.
Thanks for this video. Simple and easy to follow. I bought refill for a printer I had before and had no idea what I was doing. Needless to say, that was a waste of money for me....lol. YOU ROCK!!!
Hell yeah... Stick it to the man! That line right there made me watch to the end... And boy was I glad I did! The vacuum trick is brilliant. I knew that suction thing wasn't really needed but since I've never fooled around with any ink cartridges I figured I'd be sure first... You made me lol because I always say I'm nothing if not resourceful. And people are always amazed at all the stuff I can do... They're like omg where'd you learn how to do that and wow you can fix anything and blah blah blah... My response is always: I've got broke bitch syndrome. Where you better figure that shit out yourself if you want it to get done. And that's literally the story of my life... It's amazing the things we can do when we know we have to.
Thanks for the video. How would I know which holes to fill with which color on a HP 62 ? What if the cartridge stops working from what seems like ink drying up ? Much appreciated.
Thank you, love your video because it's very easy to follow and simple. You said you are going to make a video on color which I wasn't able to find yet. Please shase the link on your description.
No need to take sticker off. Just scrach right upper corner untill you see hole and after refill put it back. Or you can find hole(deepier dot on surface abot half mm) by scarching sticker so you dont peel it off at all.
I tried to prime my cartridge with the clip they sent several times with no success. Then I saw your video and I'm glad I did. That vacuum cleaner trick really works. Thanks.
Ive seen a lot of kits and i wondered why would i need so many things just to put ink inside a plastic box? I thought about just buying the ink bottle plus a syringe, and i also thought about using a vacuum cleaner to do the bottom part XD, your idea of using some paper to protect the cartridge was brilliant. Thanks for the video ^^.
I have an Envy 7640 with 62 cartridge and this works for me but may not work for you but if you follow any of this advice you do so at your own risk: First refill one cartridge and put into machine and then do the next so the head of the cartridges do not dry out as you're doing this. If you get a scratchy copy that might mean you have to clean the cartridge head. I do this by taking a small plate, putting just a bit of hot water in in and letting the head of the cartridge sit in the water for about 5 minutes. Then I gently pat dry the clean the cartridge with a soft wipe and wipe the pins with a q tip... be careful not to damage the pins. Also look at where you install your cartridge and clean that area thoroughly. I bought sponge sticks which work well to soak up any ink residue in the cartridge chamber (including the sponges in them) but again I gently wipe the pins inside the printer cartridge area with a q tips. After the ink is added gently clean the entire cartridge with a wipe and use q tips to clean off the pins in the front. If when you gently wipe the cartridge head you don't see ink, use the apparatus that holds the cartridge and a syringe underneath to draw out the ink through the printhead. If there's no ink take a plate and fill just a bit with hot water and let the cartridge head soak for about 5 minutes... Don't get the entire cartridge wet, just the cartridge head. Then try again... If color you should see small streaks bit blue, magenta and yellow in the water and on your wipes... and for black you'll see black. If you want to try to tape the pin on each cartridge to over-ride the error code -- you must do this very gently and carefully, there is a chance if you don't you can scratch the pins, you could also pull the pins right off the cartridge so you'll have to do this at your own risk (I do and I've not have a problem) Turn the pin head towards you and looking at the pin head: - For color tape the very bottom pin on the bottom right - For black tape the middle pin on the very top How I tape: Without gloves cut a piece of tape into about a 1/2" rectangle... Then cut that into an angle like a long triangle -- have a wider side and then a narrow side just wide enough to cover the pin. Next on the very clean cartridge very carefully cover the pin gently but and then firmly push the tail of the tape onto the plastic... You need a tail in case you have to remove the tape plus if it gets loose you can hopefully grab it gently with a tweezers. After that take a small (but not sharp) object, I use a tiny crochet hook -- press down on the reset button of each cartridge, these are on top of the cartridge and are round with a slight depression. Press down for 12-15 seconds and put back into cartridge holder. This works for me but I cannot guarantee and you should be aware if you use the tape you run the risk of pulling off the pin which I can't guarantee you won't, but if you don't want to do the tape then you might want to try pressing down on the reset button(s) for at least 12 to 15 seconds... hope it works for you :) Reply
I’ve been using hp 92 and 61 for 17 plus years on eBay. Almost every time I refilled the old ones they still didn’t work. After watching this and using the vacuum cleaner suction trick, I tried this on a 21 year old 61xl and it worked only after I used the vacuum trick lmao. Thanks!
U r great!! Thank u for sharing. Im planning to refill my cartridge. Can u refill without using syringe. Coz i dont have syringe right now. Good job new friend.
update: refilling the official hp store bought regular and XL cartridges works, the no name refills did not work for me as well. so now i will just refill the 'official' ones.
what happens when you put them back in the printer?? I heard the chips on the cartridges will say the ink is out and possibly not let you print? I have a HP envy 5530 printer. let me know if anyone else has had success with this printer!
Works with my hp2600, it does say it's empty but it keeps printing normally, i got a normal 400ml 4£ ink for markers and a 8 cent syringe from a pharmacy
When you put them back in the printer, initially the printing may be a bit shoddy or it may just print perfectly depending on how well you've primed the cartridge. Sometimes in the case of my printer, whenever I refill the ink it allows me to bypass the cancellation action of it thinking I've refilled the cartridge (which I have) by holding the stop button for 5 seconds. Read the message fully on your printer, most likely it has a bypass option.
Thank you so much, I bought the refill kit from Amazon, No instructions inside, I watched a couple of other videos on line but still no luck in getting it to work, But your Vacuum trick worked ,yes the 3rd time I saw ink seep through. It worked perfectly. With the high cost of refills these days this is a no brainer. Thank you again so much.
I did all of this with my Hp 65ink and I know I did it right And I know it’s full because the ink comes out of the bottom when I put it in the printer the orange light keeps flashing and I’m thinking it’s not recognizing it? Help please
Just the hack I was looking for....same 61 cartridge even! But you didnt say anything about what to do about covering those holes back up? Do you just put it back into the printer with the holes open like that? By the way....I believe those "slick gloves" are part of The Lady of The Night outfit. But don't quote me on that. Thanks for sharing the hack!!!
I bought the kit and have tried to refill my cartridges a few times. For me, this has not worked. I have two black ink cartridges and neither of them are working after i refill them. My belief is you can't re-use them because the cartridge head is clogged, perhaps. I don't know. I'm just saying I bought the kit, did the work, and they are not working! So before you congratulate this video, go out and try it yourself like I did and see if it actually works.
Buy the Kit Here: amzn.to/2waLUBn
Um it's hard to um understand you um! you don''t speak very clear um!
lmao, that scene with vaccum, there is special tool to do that with just syringe
Love your video! Just ordered my ink. Can’t wait to try this.
Several hp inkjets remember the last 3 or more cartridges and keep
complaining that the cartridge is empty by its estimation process. Keep 4
or more cartridges around and install 3 or more old ones till you add
the "NEW" one. it will see the last couple and think it hasnt seen the
"NEW" one before.
This video was the only one who helped me. Follow all the step by step that comes with the recharge and nothing. Thank you so much for sharing this discovery
OMG. The vacuum thing totally worked. You are a genius. Thank you so much.
That vacuum part is amazing, thank you so much for that! I couldn't get my yellow, or cyan, to come out, I knew I needed to suction them but didn't know how without the tool, this worked perfectly the first time!
I watched a lot of refilling videos on UA-cam, but this one is the best.
Thank you very much
That vacuum trick saved me! Refiling was easy but even I waiting for hours the ink wasn't there! Thank you alot.
Glad it helped! Happy New Year!
Thank you, it worked. I ordered my ink from China, it took approx 8 weeks to arrive. To my surprise it still worked, because I ordered when my cartridge it was completely dry. I did take a paper towel and dampened the end where the ink comes out, used about 7 ml, then I put the cartridge in and after a couple of copies I showed my husband who said the better copy is the one I printed.
Awesome instructions. The vacuum trick works perfectly!
Thank you for your video is answered prayer to this frustration I have had with my printer costing me so much money on the cartridges. I learned the vacuuming part new today from your video. Thanks for sharing.
Amby
Great video. I also bought these inks, and I'm really happy with the quality of the print produced from the refilled cartridges. As with other reviewers, really appreciate the tip on using a vacuum cleaner to prime the cartridges, especially as no priming tool is provided with the kit.
I don't cover them back up and it doesn't seem to matter
Your so ornary like me it's hilarious...Love it. Thanks for the how to!!! Awaiting my kit from Amazon!!
great video, just got refill from ebay for $7.10 great thanks. This is really a great video...
Again thanking you in advance for this...
Wow !! Thank you for sharing this video!! Love from the UK
You're welcome, happy new year!
2 years later...BIG HELP.
Followed the video for HP 63
Filled about 10ml and did the vacuum trick and it worked!
thanks
Thank you was about to ask about the 63 .
The vacuum did the trick for me--thank you thank you!!!
I bought my printer for $20 during Thanksgiving 5 years before. When I checked for a refill, it cost double the price of my printer. So I didn't replace it for more than 4 years since I took all my printouts from the office. During the lock down I had no other option. Since original refills were super costly I thought of buying a new printer. But none of the budget printers were available in stock near my place. So I ended up searching for the third party ink replacement. I found your video. I was not confident but thought of giving it a try since the refill cost was very reasonable. To my surprise, it worked like a charm on my five-year-old printer. But it didn't show ink levels and I get a warning whenever I restart the printer. But I can live without ink levels. Thank you again for sharing.
thanks for the vacuum tip, I'm now starting refilling my cartridges
Thank you for the video just bought the same ones but nobody really shows it well.
As a broke college student, I want to thank you for this video. 📹 🙏
Great video, where's the one for the colored cartridge?!
Thank you so much for sharing this!
You don't know what you've done for me 😭😭😭
Thank you so much !!💪💪
For the coloured the process is the same but unlike the black each colour must go into its perspective holes.....the red that is in the middle goes into the top hole, the blue and yellow goes into whichever sides they are found on.
Tips & Tricks:
1. Wear gloves
2. Make a work space with something you don't mind getting ink on. I used paper grocery bag. I would use something you can throw away. Unless you are hand washing after. I would not put it in the washing machine unless you don't care about ink inside your washer, dryer and other things you are washing.
3. Wear gloves.
4. Wear an apron.
5. Have rubbing alcohol on hand. Near by. At least, it's what I used when I got it on my light beige carpet. 😤😁
6. Have extra paper towels already off the roll ready to use.
7. Wear gloves.
8. If you use the vacuum method, only do 1 or 2 second bursts. Trust me.
9. Don't open the bottle all the way, just poke needle through the foil, it will be better later when you need to tip the bottle some.
10. Wear gloves.
11. If using plastic throw away gloves you can take an unused pair and sips the tips off the fingers to put over the ink bottle and then put the lid back on. I know it's not necessary but it has helped me.
12. Tighten the caps closed. Check again before storing.
13. Did I say wear gloves?? Trust me. You're not that good. I am and I still need gloves. JK 😛 Just get some gloves will ya.. I say trust me but you don't know me so, there's that but I will say... alcohol took it out of my carpet. It didn't take it off my skin...
Your instructions were not clear. Should I wear gloves?
😅😅 *sarcasm*
Don't sit your refilled cartridge upside down for obvious reasons. And put the sticker back over the holes if you don't have any tape.
Everything that you stated in your video was simply brilliant!!! The trick with the vacuum to get the ink flowing was awesome! I did everything that you said, including the vacuum trick, and it worked like a charm as I got my ink cartridge working again. I also liked your advice to fill the ink cartridge BEFORE it runs out and the printer starts detecting and rejecting it to be used again. Yes, these HP cartridges are a pain and a money grabber - they just put all these obstacles in front of a person so that he/she gives up and buys a new cartridge which can get expensive over time. I agree, the best saying of your video - "Stick it to the Man!" I love it! Thank you so much for posting this video that just promotes common sense in order to help others. I can't thank you enough. Your video was well worth it - I Liked it and I Subscribed! Excellent job! Paul.
You’re video was the only one that actually Helped me. NowI have a question.. is refilling cartridges good for printing other things besides documents? I’ve tried printing stickers and the ink tends to be textured doesn’t come out smooth, you see lines running through it I’m not sure what I did wrong or if I did anything wrong I clean the cartridges but the problem still occurs. Could it be the ink ?
2:15 - this is your way to stick it to the man 😂😂 (Great video, thank you!!)
Very cool do you know about using tape to cover the e contacts on a HP 63 BLK cartridge to reset the printer ink level? If so please let me know... Thank you in advance ✌️😎👍
I've long thought that this could be done but haven't seen it done. Thanks for sharing! The cost of ink for printers is above and beyond ridiculous for how long it last.
If you calculated the price and amount of ink you get in 1 ink cartridge, it calculates to approx $500 a gallon !!😮 - scam, thieves, rip off !!😡😠
@@user-jo5fz8iw3b I never thought about it by the gallon but it doesn't take a fool to see that ink cost 50 times too much like everything else.
@@RC-Heli835
Some fools never think about it tho😉
@@user-jo5fz8iw3b some fools actually tried it and it is poor quality at best
Thank you for this video. I had the ink package but I wasn't sure how to do it. Pretty resourceful with that vacuum cleaner. Love it!
If you blow into the top where youve filled in the ink, it will help with the ink flow part so you dont have to pull out the vaccum
Interesting, havn't tried it.
Thanks so much ! Great information
Very good thanks especially with the vacuum i wouldn't thought of that work great after trying it out thanks again
How to clean the syringe? Just with water?
I don't know if water will work because i got ink on me and it would not come off.
good question I guess will never know.
I just suck up water and dispense into a paper towel to clean them. My kit is honestly really dirty from years of use, but it keeps on working so 🤷♀
Thank you very much. It worked like a charm for me :-)
I did a refill on an HP 2710 all in one printer. The first one I did was black 63XL I pieced the hole as was suggested and the cartridge was not recognized and the printer would not print. I suspect the label has information on it as it is foil. The second one I did was 63XL tricolor. I used a heatgun but a blow dryer might work and I carefully pealed off the label with a razor blade. I did the refills really loading them with ink and it worked and still working for 2 months. The third time I did a black 63 non-xl. I cut the bottom label corner accidently while removing the label. The cartridge would not stop dripping because when I put the label back on air was getting sucked through the cut label at the top. I sealed it with clear silicone sealant and a piece of shipping label. The label was porous so I had to coat the label surface with silicone sealant as well. I popped it back in and it works great. If the foil label won't lay flat I used Scotch Super 77 adhesive which will allow me to remove the label again next time. For black you only need to remove the label half way. For color remove a third of the label at the top and a third at the bottom.
Thanks for this video. Simple and easy to follow. I bought refill for a printer I had before and had no idea what I was doing. Needless to say, that was a waste of money for me....lol. YOU ROCK!!!
Dang this is genius thnx girl
@Shaikh Abdul aziz scam
sweet.. your vacuum method save me from paying more for the kit.
Very good video save me money..
Omg it worked .........thanks. I couldn't get it to work until I got out the that shop vacuum....works fast thanks
Hell yeah... Stick it to the man! That line right there made me watch to the end... And boy was I glad I did! The vacuum trick is brilliant. I knew that suction thing wasn't really needed but since I've never fooled around with any ink cartridges I figured I'd be sure first... You made me lol because I always say I'm nothing if not resourceful. And people are always amazed at all the stuff I can do... They're like omg where'd you learn how to do that and wow you can fix anything and blah blah blah... My response is always: I've got broke bitch syndrome. Where you better figure that shit out yourself if you want it to get done. And that's literally the story of my life... It's amazing the things we can do when we know we have to.
Thanks for the video. How would I know which holes to fill with which color on a HP 62 ?
What if the cartridge stops working from what seems like ink drying up ?
Much appreciated.
Thank you, love your video because it's very easy to follow and simple. You said you are going to make a video on color which I wasn't able to find yet. Please shase the link on your description.
girl you rock! i love my vacuum now that i have a use for it
استخدام المكنسة الكهربائية لسحب الهواء فمرة جميلة .. شكراً لك
LOVE the vacuum bit! I was pissed when my kit didn't come with one of those priming tools.
do you really need priming tool?
Thank you so much! It worked.
Here is the link to the Hp 93 color cartridge i found ua-cam.com/video/ZTVOyZuxItc/v-deo.html
Great video keep your channel going.
Do a video on the color cartriges..
No need to take sticker off. Just scrach right upper corner untill you see hole and after refill put it back. Or you can find hole(deepier dot on surface abot half mm) by scarching sticker so you dont peel it off at all.
I filled my cartridge as instructed, but it’s still not printing. Showing like it’s almost out of ink. :(
Thank you soooooo much💕💕
Love it !!😊
Where is the color ink cartridge refill video - please post a link to it
This is amazing especially for right now HP 902 has been out of stock from the manufacturer for WEEKS now!! Needed this for my office printer.
FYI cyan is pronounced with the soft c sound. phonetically its si-an
I tried to prime my cartridge with the clip they sent several times with no success. Then I saw your video and I'm glad I did. That vacuum cleaner trick really works. Thanks.
Thank you very much it worked👍❤👍❤💕
Keep up your awesome videos they are very helpful..Do the color one .. on the ink check on ebay as well i did.
Ive seen a lot of kits and i wondered why would i need so many things just to put ink inside a plastic box? I thought about just buying the ink bottle plus a syringe, and i also thought about using a vacuum cleaner to do the bottom part XD, your idea of using some paper to protect the cartridge was brilliant. Thanks for the video ^^.
other videos say to be careful not to touch the bottom filter thing.
you are the best thank you !!!!
color video? please :)
How do you reset the cartridges? Will it still print if the printer show that is empty?
I have an Envy 7640 with 62 cartridge and this works for me but may not work for you but if you follow any of this advice you do so at your own risk:
First refill one cartridge and put into machine and then do the next so the head of the cartridges do not dry out as you're doing this. If you get a scratchy copy that might mean you have to clean the cartridge head. I do this by taking a small plate, putting just a bit of hot water in in and letting the head of the cartridge sit in the water for about 5 minutes. Then I gently pat dry the clean the cartridge with a soft wipe and wipe the pins with a q tip... be careful not to damage the pins.
Also look at where you install your cartridge and clean that area thoroughly. I bought sponge sticks which work well to soak up any ink residue in the cartridge chamber (including the sponges in them) but again I gently wipe the pins inside the printer cartridge area with a q tips.
After the ink is added gently clean the entire cartridge with a wipe and use q tips to clean off the pins in the front. If when you gently wipe the cartridge head you don't see ink, use the apparatus that holds the cartridge and a syringe underneath to draw out the ink through the printhead. If there's no ink take a plate and fill just a bit with hot water and let the cartridge head soak for about 5 minutes... Don't get the entire cartridge wet, just the cartridge head. Then try again... If color you should see small streaks bit blue, magenta and yellow in the water and on your wipes... and for black you'll see black.
If you want to try to tape the pin on each cartridge to over-ride the error code -- you must do this very gently and carefully, there is a chance if you don't you can scratch the pins, you could also pull the pins right off the cartridge so you'll have to do this at your own risk (I do and I've not have a problem)
Turn the pin head towards you and looking at the pin head:
- For color tape the very bottom pin on the bottom right
- For black tape the middle pin on the very top
How I tape: Without gloves cut a piece of tape into about a 1/2" rectangle... Then cut that into an angle like a long triangle -- have a wider side and then a narrow side just wide enough to cover the pin. Next on the very clean cartridge very carefully cover the pin gently but and then firmly push the tail of the tape onto the plastic... You need a tail in case you have to remove the tape plus if it gets loose you can hopefully grab it gently with a tweezers.
After that take a small (but not sharp) object, I use a tiny crochet hook -- press down on the reset button of each cartridge, these are on top of the cartridge and are round with a slight depression. Press down for 12-15 seconds and put back into cartridge holder.
This works for me but I cannot guarantee and you should be aware if you use the tape you run the risk of pulling off the pin which I can't guarantee you won't, but if you don't want to do the tape then you might want to try pressing down on the reset button(s) for at least 12 to 15 seconds... hope it works for you :)
Reply
The vacuum trick worked like a charm.
Helpful thankyou
Awesome Video! It Worked!!! Thank You!
That helped, thank you.
Where is the video for the Color one?
You really "stuck it to the Man" by refilling your ink cartridges! Bless your heart!
Thanks for the tip! You’ve just saved me hundreds!
I ordered. And this worked like a charm. Thank you!!!!!!!!!!!!
Thanks, it prints great!!!!
I’ve been using hp 92 and 61 for 17 plus years on eBay. Almost every time I refilled the old ones they still didn’t work. After watching this and using the vacuum cleaner suction trick, I tried this on a 21 year old 61xl and it worked only after I used the vacuum trick lmao. Thanks!
Thank you. I will try this.
Grammarly is for .......
U r great!! Thank u for sharing. Im planning to refill my cartridge. Can u refill without using syringe. Coz i dont have syringe right now. Good job new friend.
Easy instructions and it worked. Thanks!
used this method and then the vacuum method in the end - wish I had stumbled upon this video 5 years ago - tysm!!!
That's great, happy new year!
update: refilling the official hp store bought regular and XL cartridges works, the no name refills did not work for me as well. so now i will just refill the 'official' ones.
what happens when you put them back in the printer?? I heard the chips on the cartridges will say the ink is out and possibly not let you print? I have a HP envy 5530 printer. let me know if anyone else has had success with this printer!
Works with my hp2600, it does say it's empty but it keeps printing normally, i got a normal 400ml 4£ ink for markers and a 8 cent syringe from a pharmacy
When you put them back in the printer, initially the printing may be a bit shoddy or it may just print perfectly depending on how well you've primed the cartridge. Sometimes in the case of my printer, whenever I refill the ink it allows me to bypass the cancellation action of it thinking I've refilled the cartridge (which I have) by holding the stop button for 5 seconds. Read the message fully on your printer, most likely it has a bypass option.
Thank you so much, I bought the refill kit from Amazon, No instructions inside, I watched a couple of other videos on line but still no luck in getting it to work, But your Vacuum trick worked ,yes the 3rd time I saw ink seep through. It worked perfectly. With the high cost of refills these days this is a no brainer.
Thank you again so much.
I did all of this with my Hp 65ink and I know I did it right
And I know it’s full because the ink comes out of the bottom when I put it in the printer the orange light keeps flashing and I’m thinking it’s not recognizing it? Help please
Thank you ... It worked!
Awesome! Did you ever do the color ink video or does anyone have a good one to recommend
Just the hack I was looking for....same 61 cartridge even! But you didnt say anything about what to do about covering those holes back up? Do you just put it back into the printer with the holes open like that? By the way....I believe those "slick gloves" are part of The Lady of The Night outfit. But don't quote me on that. Thanks for sharing the hack!!!
I don't normally comment on videos but your vacuum hack is awesome!👍
Thank you! 😊
Thank you so much. Just if you refill the colors to make sure how many mm.
How much ink does the Hp XL cartridges hold?
I bought the kit and have tried to refill my cartridges a few times. For me, this has not worked. I have two black ink cartridges and neither of them are working after i refill them. My belief is you can't re-use them because the cartridge head is clogged, perhaps. I don't know. I'm just saying I bought the kit, did the work, and they are not working! So before you congratulate this video, go out and try it yourself like I did and see if it actually works.
The vacuum cleaner method saved my color cartridge. Great video!
Please can someone tell me a good ink that I use deskjet printer HP 2700. I Litra ink just name ?
Do you have a video on doing the color ones ?
An empty HP 63/302 ink cartridge for instance, typically weighs around 20 to 25 grams.
Are the Jetsir ink quality? I'm interested in buying, but hows the quality when printing?
Im not buying another ink jet. Ordered, thanks.
ts3100 series canon. Anybody got a link for the correct refill kit. Or any relevant info?? TY!!!