Yeah no doubt that is why they wrapped in with wrap so you could not pull the plugs or do a compression test but that's the shit you have to do when buying a engine anymore or your going to get ripped off. I bought a trans not long ago that was supposed to of been rebuilt a year ago when I pulled the pan off and the bottom of the pan was covered in clutch material I knew I got the shaft because no new trans a year ago with limited miles was looking like a burned up 200 thousand mile trans.
Idk if he got this off Mike Henson or what … Bc I heard talking about him when he said he went and pick tht motor up, and home always saying funny shit … so idk … you think him being a motor/engine builder that he would have known … an would make it right bc he doesn’t want a bad name … but who knows who he got it off of … ?
@@justingilkerson7885if he got it from Henson then Henson didn’t know, these guys are almost millionaires, they aren’t going to scam someone over a 3,000$ engine.
It’s probably a little different when you’re famous. Theres no telling what some nut job would do if you named the guy that you could get blamed for. That’s not to say I disagree because I do believe people should know I’m just saying I can see why he wouldn’t.
Those merge lanes don’t have a speed limit. That is your free pass to try your 30-120. They are not meant for you to get on the interstate at 40 miles an hour when the speed limit is 70.
@ We found the guy nobody likes at the party! FYI, it’s you. if that were the case then there would be a sign on the acceleration lane. How would ppl know what the speed limit is on the road they are merging into.
@@andrewjohnson5275bc if you have driven the road more them a few times you know the speed limit … haha 😅 come on now … we aren’t the police here… sorry officer I didn’t see the sign 🪧… haha 😅I thought the speed limit was 85… wtf … haha you learn that the merging lane is the same speed as the speed limit of the interstate or wherever you are merging …plus common sense… which no one has now days
@ there is no posted speed limit signs on the merge ramp, if that’s your theory then one should assume the speed limit is still the same from the road they got off of say 35 and the speed limit doesn’t change until you get onto the interstate so then that’s where you would come up to speed
I got scammed on a motor recently too. They showed me a video of it running and everything. Got it home and torn down only to find 3 bad lifters and a wiped cam. Luckily I was planning on building it from the short block up anyways Cylinders were all within spec, even the pistons were within spec size wise. Everything looked good besides the lifters and cam. Either way it’s a ground up build anyway
Everyday I am reminded of the lack of INTEGRITY AND DISHONESTY that has become way more prevalent with each passing year... but some of us remember to try and treat folks like we would like to be treated... right? SHAWN and PHANTOM, I hope that you and your families and friends enjoy a HAPPY THANKSGIVING in the next few days and know we are thankful for your friendships and the gifts you share with us weekly. Cheers gents Seth
@ 6:30 as a truck driver, I approve that message. I have to deal with this every day. Im at cruise control between 55 and 59 most the time, and a car right beside me on an on- ramp can't speed up faster than me? Insane. Plus the tesla (which has great acceleration) and the prius cars are the worse to be behind. If you dont hit the throttle while be prepared to hit the brake or be in the gravel 😂.
💯% on the merge, and the NASCAR curve, if you aint 15 to 20 over the speed limit by the time you get to the point where you can merge your not doing it right, i once was driving my bosses 60 Corvette with a really healthy small block and as i hit second gear on the merge curve the other mechanic following me said he thought i was gonna crash the car because once it hit second he said he seen both side doors, and i never let off, thats how you merge, note to self 60 vettes are pretty light in the ass end
Dude they're all light in the ass end cause they're all made from Fiberglass, there'sno weight to them. The only ones that aren't light in the ass is the new mid engine corvettes, and it still gets squirley as fuck.
@Rob_Moilanen it was the first time I ever drove a first gen vette, it didn't help it had 4:11 gears in the rear, a healthy small block not sure exactly what was done to it, but it had a nice chop, aluminum heads, and a double pumper holley, and a pretty crisp shifting turbo 400, boss man bought it already built for his son so didn't really know much more than that about the motor, but it had been in a storage unit for at least a year he sent me over with fresh gas and a battery to get it out and running, I got about midway thru the banked curve popped second and was swatting flys in the driver seat, i laughed when the other mechanic following me said he saw both side doors and the pipes never stopped screaming, he thought for sure i was gonna crack up this beautiful vette, the boss said run it hard and make sure everything is ok, i definitely checked ✔️that box, I may or may not of been doing at least 100 mph+ when I merged, good times thats been about 10 years ago now
I been building a 95 turbo Mustang for ten years and for two years I have been getting screwed over by two machine shops I'm at the point were I'm losing the spark that I once had so I'm going to try my luck at this maybe it's my time😅
@@sirmonkey1985no it’s not you clearly don’t understand how defamation works. You must prove 3 things. 1. The statement made was false. 2. The person making the statement knew it was false and made it anyways. 3. The damages that occurred because of said defamation. This is usually represented as a monetary loss. In a case like this they definitely couldn’t do first two which means they couldn’t do the third by default. Bringing a defamation suit on something like that is a good way to loose money on a lawyer then get yourself sued for defamation because the lawsuit made them look bad publicly causing them loss, you sold them trash so you knew your lawsuit was shit. And you knew you sold them shit on a lie to start out. So by bringing that bad defamation suit you make and prove all three for those you try to sue over your lies.
Any chance you could add some 187 Customs stickers to the website? Ones that look like the keychains? I would like a couple for my garage. MURDER NOVA and/or - 187 - Customs Home of the Murder Nova
I will keep my eyes open for a gen 2 coyote but I’m doing a 3-2-1 build on my 2011 mustang. The engine is around a little over 12k if that’s something that would work for you I have the info for the guys that have the engines.
It’s sad how much people can be pieces of crap and screw over others, hopefully you guys can find another motor. Keep up the great work guys and hope you enjoyed your thanksgiving.
As much partnership as you have done with Texas Speed why not talk to them and see if they will sponsor or give a deep discount for some advertisement. A TSP 427 would be nice
You could keep the 5.3 in there, and just throw in some decent pistons and rods with ARP bolts and shit. And maybe some ported heads or some type of aftermarket head with some good valves and shit in it and have something more reliable than that 6'2 just not with the same displacement but the better internals
With that engine not being good Knowing you and your team I know it's going to come out even better because your going to make sure the engine you put in the pickup is going to be a 100% in good condition.
beware of the 6.2's ive got a 20 silverado, im on number 3. 50k the first one grenaded itself. next ones had lifter and rocker issues. both new blocks from GM
I had the same thing happen to my Hayes converter for my 4l80E, those flat head hex drive converter adapter bolts are too long they bottom out against the converter. I was driving home one day after a high rev launch and it started knocking, I pulled the motor and replaced it but found the loose converter adapter plate bolts halfway through LOL oh well the head gasket was torched too so F it. I ground the ends of the bolts to shorten them a touch and threw red loctite on them because if they loosen again that POS convertor and adapter are going in the trash
Sucks. Exleast you looked it over. Some guys might but it in the truck got it all back together and then found out. Don’t ask how I know lol. Personally I’d still want truck with 5.3. Let’s face it that truck going to need to be worked on time to time. It’s how it is with power vehicles.
Feel your pain happened to me a year ago bought an engine the seller started it up for me sold it with the headers when I was removing the headers the block had a crack and repaired
That sucks! By the time you buy a new one you might as well build this one for boost. 6.2s don’t like boost stock anyways generally speaking so some ring gap will go a long ways
And if your looking for 2nd gen yoty I can possibly get my hands on 2 or 3 of them I'll let you know if I can get them. My really friend owns 3 pull and save wrecking yards
Man that kind of dishonest shit makes my blood boil!! Man peaple like that are so lucky I've gotten older and wiser because in my younger years they would have a serious problem coming there way I'm sure yall feel the same!!
It should have a quality sleeved LS with a forged rotating assembly, heads & valvetrain.. Why y'all didn't just send the 5.3 to someone to make a nice piece out of baffles me.. People are charging waaaay to much for these Gen V motors.. $4-$5k bucks is crazy money.. I bought a LT4 w/ 10spd all harnesses, pcm & tcm, with kooks headers, 11k miles for $7800 & a 2022 LT1 with TR6060 manual for $5,000 even, 22k mi, McCloud Rxt clutch, msd intake, rotofab cai & btr cam/springs/lifters.
Instead of taking the time to mail 187 Customs a card for an entry just steal $30 from your girls purse and buy a shirt. The guys need it for a new 6.2!
Gtfoh lol there's a 99% chance he's doing better than everybody in this comment section 😂 don't tell people what to do with their money if they can swing it that's what they will do because it gives them a way higher probability of winning just through the amount of entries...
Big boy power coyote cars lock there cams usually but ive heard of a few ppl who dont lock them it helps with spooling etc. send that 6.2 to henson have him fix it
I love Aiden saying "they are giving my truck away"! lol
I was thinking the same thing!
Take that boat anchor ⚓️ back and get your cash back!!
Yea, go back and shove it up his ass.
Amen brother You got the right idea about merging on to a highway people don't know how to do it
Wasnt expecting a 2nd video this week let alone so late at night. Mallory is keeping them boys in check and pumping out content.
Damn man takes a real slime ball to sell someone a bad engine knowing you're a well-known person in the car community. Crazy shit...
Yeah no doubt that is why they wrapped in with wrap so you could not pull the plugs or do a compression test but that's the shit you have to do when buying a engine anymore or your going to get ripped off. I bought a trans not long ago that was supposed to of been rebuilt a year ago when I pulled the pan off and the bottom of the pan was covered in clutch material I knew I got the shaft because no new trans a year ago with limited miles was looking like a burned up 200 thousand mile trans.
Idk if he got this off Mike Henson or what … Bc I heard talking about him when he said he went and pick tht motor up, and home always saying funny shit … so idk … you think him being a motor/engine builder that he would have known … an would make it right bc he doesn’t want a bad name … but who knows who he got it off of … ?
@@justingilkerson7885if he got it from Henson then Henson didn’t know, these guys are almost millionaires, they aren’t going to scam someone over a 3,000$ engine.
Im dying how the Trophies are sitting on the Floor with all the parts lmao .Love you guys happy ThanksGiving
Man if that was me id name and shame....
All car guys should do it make and shame so the best shops and dealers survive
It’s probably a little different when you’re famous. Theres no telling what some nut job would do if you named the guy that you could get blamed for. That’s not to say I disagree because I do believe people should know I’m just saying I can see why he wouldn’t.
Sorry about the problems with the 6.2L, but I hope y'all had a Happy Thanksgiving!! Thanks for the video!!
Thanks for educating ppl on how to merge. As a trucker ppl need to know that and also know if I’m on the freeway I don’t have to YEILD TO RAMP TRAFFIC
Happy Thanksgiving, Shawn, Phantom, and family! Peace 🦃🍻💨
Happy Thanksgiving to you too!
Your son is your legit twin. Talks exactly the same.
Those merge lanes don’t have a speed limit. That is your free pass to try your 30-120. They are not meant for you to get on the interstate at 40 miles an hour when the speed limit is 70.
They do have a speed limit the same as the lane you’re merging into.
@ We found the guy nobody likes at the party! FYI, it’s you. if that were the case then there would be a sign on the acceleration lane. How would ppl know what the speed limit is on the road they are merging into.
@@andrewjohnson5275bc if you have driven the road more them a few times you know the speed limit … haha 😅 come on now … we aren’t the police here… sorry officer I didn’t see the sign 🪧… haha 😅I thought the speed limit was 85… wtf … haha you learn that the merging lane is the same speed as the speed limit of the interstate or wherever you are merging …plus common sense… which no one has now days
@ there is no posted speed limit signs on the merge ramp, if that’s your theory then one should assume the speed limit is still the same from the road they got off of say 35 and the speed limit doesn’t change until you get onto the interstate so then that’s where you would come up to speed
I hate it when people do 40 up the ramp but its worse when they do 40 untill they hit the highway and then pass me when im doing 75.
Sucks… it happens. Usually when we least expect it.
Scammers suck! Guess we need to buy more merch to pay for a lil something from Texas Speed.
I got scammed on a motor recently too. They showed me a video of it running and everything.
Got it home and torn down only to find 3 bad lifters and a wiped cam.
Luckily I was planning on building it from the short block up anyways
Cylinders were all within spec, even the pistons were within spec size wise. Everything looked good besides the lifters and cam.
Either way it’s a ground up build anyway
This is why I appreciate your videos. Truth and honesty
That’s exactly the way merge like a nascar driver I fill like that lane is a legal way to floor it 😂
Everyday I am reminded of the lack of INTEGRITY AND DISHONESTY that has become way more prevalent with each passing year... but some of us remember to try and treat folks like we would like to be treated... right?
SHAWN and PHANTOM, I hope that you and your families and friends enjoy a HAPPY THANKSGIVING in the next few days and know we are thankful for your friendships and the gifts you share with us weekly.
Cheers gents
Seth
Always love seeing your videos guys much love and respect thanks for sharing ❤❤❤
Happy Thanksgiving guys and everyone watching ❤
Integrity is everything, and you guys have it. 👍
@ 6:30 as a truck driver, I approve that message. I have to deal with this every day. Im at cruise control between 55 and 59 most the time, and a car right beside me on an on- ramp can't speed up faster than me? Insane. Plus the tesla (which has great acceleration) and the prius cars are the worse to be behind. If you dont hit the throttle while be prepared to hit the brake or be in the gravel 😂.
13:33 I will be now using that term "well machined oil" 😂😂
Man that sucks. Yall will figure out something I'm sure. Would still be proud to get this truck.
Yes, driving and cruising down the road, listening to some Van Halen cranked is awesome.
Personally, I would take that back to the guy and drop it on his front room floor and get my money back
That sucks, I know there are drop in forged pistons and rods for a Gen 5 6.2 L but the bores have to be clean for it to work out.
Time for some WD style scammer retaliation.
It's so sad it's getting to where you can't trust anyone when buying used parts
Just here for the algorithm… love the 2 videos this week
Wow ur son Aiden does an amazing job at talking. Takes after Dad.
💯% on the merge, and the NASCAR curve, if you aint 15 to 20 over the speed limit by the time you get to the point where you can merge your not doing it right, i once was driving my bosses 60 Corvette with a really healthy small block and as i hit second gear on the merge curve the other mechanic following me said he thought i was gonna crash the car because once it hit second he said he seen both side doors, and i never let off, thats how you merge, note to self 60 vettes are pretty light in the ass end
Dude they're all light in the ass end cause they're all made from Fiberglass, there'sno weight to them. The only ones that aren't light in the ass is the new mid engine corvettes, and it still gets squirley as fuck.
@Rob_Moilanen it was the first time I ever drove a first gen vette, it didn't help it had 4:11 gears in the rear, a healthy small block not sure exactly what was done to it, but it had a nice chop, aluminum heads, and a double pumper holley, and a pretty crisp shifting turbo 400, boss man bought it already built for his son so didn't really know much more than that about the motor, but it had been in a storage unit for at least a year he sent me over with fresh gas and a battery to get it out and running, I got about midway thru the banked curve popped second and was swatting flys in the driver seat, i laughed when the other mechanic following me said he saw both side doors and the pipes never stopped screaming, he thought for sure i was gonna crack up this beautiful vette, the boss said run it hard and make sure everything is ok, i definitely checked ✔️that box, I may or may not of been doing at least 100 mph+ when I merged, good times thats been about 10 years ago now
Pride in workmanship is why I'm in on this giveaway!
Thank you and good luck!
Here in Mississippi we call those dirt dobbers...
I been building a 95 turbo Mustang for ten years and for two years I have been getting screwed over by two machine shops I'm at the point were I'm losing the spark that I once had so I'm going to try my luck at this maybe it's my time😅
Give them a chance to make it right and if they don’t, Name him. Call em out.
not worth it.. that's an easy defamation lawsuit win for them especially if it's a private seller.
@@sirmonkey1985no it’s not you clearly don’t understand how defamation works. You must prove 3 things.
1. The statement made was false.
2. The person making the statement knew it was false and made it anyways.
3. The damages that occurred because of said defamation. This is usually represented as a monetary loss.
In a case like this they definitely couldn’t do first two which means they couldn’t do the third by default. Bringing a defamation suit on something like that is a good way to loose money on a lawyer then get yourself sued for defamation because the lawsuit made them look bad publicly causing them loss, you sold them trash so you knew your lawsuit was shit. And you knew you sold them shit on a lie to start out. So by bringing that bad defamation suit you make and prove all three for those you try to sue over your lies.
Ilove you too murdernova and phantom 4.05 and the 55 187customs ❤️
Hope yall had a good Thanksgiving fellas,,,, and we need a update on ur wifes mustang phantom......❤
Love an honest guy.
The blue donk is badass are you guys taking anything to PRI this year?
Any chance you could add some 187 Customs stickers to the website? Ones that look like the keychains? I would like a couple for my garage.
MURDER
NOVA
and/or
- 187 -
Customs
Home of the Murder Nova
Man what a kick in the nuts. I feel for yall and respect yall for not going with that motor.
Rebuild the motor that’s in it. It would be a dream to win something like this let alone from the 187 crew!!!
Oh man, so sorry to watch this. May God save the 187 Customs !
I love merging too!! 75 South through Cincinnati I'm typically running 70 at the merge, it's a speedway
First time merch buyer in Seattle - will rep 187 proudly. Think I could do a better job by driving that truck around up here though..
I will keep my eyes open for a gen 2 coyote but I’m doing a 3-2-1 build on my 2011 mustang. The engine is around a little over 12k if that’s something that would work for you I have the info for the guys that have the engines.
Some people just suck but thank god Shawn and crew are not that way and won’t give away junk.
Run that down to Texas Seed and have them clean it and re-sleeve it for a 427 boost friendly short block.
Can't be too bad on price.
Dang that sucks guys!!!!! Thanks for the video tho happy Thanksgiving
Thanks for clarifying how to merge people still don’t get it.
Video on the DONK please 🙏🏾
Now, I cant wait to see what yall put out Thursday!
It’s sad how much people can be pieces of crap and screw over others, hopefully you guys can find another motor. Keep up the great work guys and hope you enjoyed your thanksgiving.
Take a shot every time he says “ guys “… drink up!
0:06 Great to see your Son finally sayi g something 😂😂😂lol hes usually running around getting this or that but hardly ever hear him talk 👍👍👍💯💯💯🍻🍻🍻
Whoever sold this knowing it was junk you do know your daily driver is blowing up this week if it hasn’t already.
As much partnership as you have done with Texas Speed why not talk to them and see if they will sponsor or give a deep discount for some advertisement. A TSP 427 would be nice
I hope who ever sold you this engine reads the comments so they know what a POS they are !
You could keep the 5.3 in there, and just throw in some decent pistons and rods with ARP bolts and shit. And maybe some ported heads or some type of aftermarket head with some good valves and shit in it and have something more reliable than that 6'2 just not with the same displacement but the better internals
Happy Thanksgiving everyone
With that engine not being good Knowing you and your team I know it's going to come out even better because your going to make sure the engine you put in the pickup is going to be a 100% in good condition.
Yo, y'all should do what Ryan Martin just did to his 2015 and swap in a 10speed! Talk about make it a complete package
I LOVE the look of that truck!!
Somebody would be getting 3500 dollars worth of ass kicking, cause I wouldn't, won't, and couldn't accept that loss
Why just spend 100 bucks file small claims on them get the money back plus keep the engine 😂
I see SS stripes.. what is that Chevelle? Is that same one thats been there?😊
I’m digging the beard and goatee,bad ass looking.Congratulations on your championship….
beware of the 6.2's ive got a 20 silverado, im on number 3. 50k the first one grenaded itself. next ones had lifter and rocker issues. both new blocks from GM
I had the same thing happen to my Hayes converter for my 4l80E, those flat head hex drive converter adapter bolts are too long they bottom out against the converter. I was driving home one day after a high rev launch and it started knocking, I pulled the motor and replaced it but found the loose converter adapter plate bolts halfway through LOL oh well the head gasket was torched too so F it.
I ground the ends of the bolts to shorten them a touch and threw red loctite on them because if they loosen again that POS convertor and adapter are going in the trash
Man that grey Chevelle is NICE 👌🏻
The best one yet ❤💪🏼👌
Damn, yall got got. Did yall tell them ya was a OKe from Fenoke !
Looks like the cats like the roof of the blue donk judging by all the foot prints on the front window.😂
U need a USB memory saver to keep you radio and stereo setting while battery is disconnected
So awesome 2 videos this week.
Yall drove it,idled it,and dynoed it,,,and the rings weren't seated???after the build,????From Henson???
You didn’t listen to the whole story
Sucks. Exleast you looked it over. Some guys might but it in the truck got it all back together and then found out. Don’t ask how I know lol. Personally I’d still want truck with 5.3. Let’s face it that truck going to need to be worked on time to time. It’s how it is with power vehicles.
Needs that 10 speed that Ryan Martin just posted
Feel your pain happened to me a year ago bought an engine the seller started it up for me sold it with the headers when I was removing the headers the block had a crack and repaired
That sucks! By the time you buy a new one you might as well build this one for boost. 6.2s don’t like boost stock anyways generally speaking so some ring gap will go a long ways
And if your looking for 2nd gen yoty I can possibly get my hands on 2 or 3 of them I'll let you know if I can get them. My really friend owns 3 pull and save wrecking yards
Man that kind of dishonest shit makes my blood boil!! Man peaple like that are so lucky I've gotten older and wiser because in my younger years they would have a serious problem coming there way I'm sure yall feel the same!!
Hell ya get on the road and jam some Nickleback….or whatever shawn jams to.
Need to make a video of u going to get ur money 💰 back !
It's sickening how some people work extra hard to pull off a freaking scam
Is the draw available to Canadians
It should have a quality sleeved LS with a forged rotating assembly, heads & valvetrain.. Why y'all didn't just send the 5.3 to someone to make a nice piece out of baffles me.. People are charging waaaay to much for these Gen V motors.. $4-$5k bucks is crazy money.. I bought a LT4 w/ 10spd all harnesses, pcm & tcm, with kooks headers, 11k miles for $7800 & a 2022 LT1 with TR6060 manual for $5,000 even, 22k mi, McCloud Rxt clutch, msd intake, rotofab cai & btr cam/springs/lifters.
lol no you didn’t
Shawn pr phantom you should get ahold of James goad im sure he may have a 6.2 or know someone that has a good one for sale.
What about a Gen 1 block with Gen 2 heads??
Drove past today and seen the blue donk out enjoy the cruising weather while it last
That donk is sick
Instead of taking the time to mail 187 Customs a card for an entry just steal $30 from your girls purse and buy a shirt. The guys need it for a new 6.2!
Gtfoh lol there's a 99% chance he's doing better than everybody in this comment section 😂 don't tell people what to do with their money if they can swing it that's what they will do because it gives them a way higher probability of winning just through the amount of entries...
Apparently this guy thinks that you have to psychically mail your entry like online sales are the same
Don't forget that they will make 3 times or 4 times what the truck is worth...😂😂
An odd way to scare people away from the giveaway.
@@BelleTx214
Please explain to us, who know...?
Bought my shirt, can’t wait to get it, hate someone would scam yall but I know yall will make it right.
I love what you are doing mat
Did you see the Hemi Lutz and Millican teamed up w that guy thats making kits so you can turn hot rod engines into hydrogen engines put it in that 57
Can you get merch delivered to the uk?
Yep! We ship world wide
I love seeing Aiden take charge doing a good job I can't wait to your Chevelle is up and running and you're on the streets
Just curious what music does Shawn like to jam out to? Oh btw I’m winning that truck!!
Big boy power coyote cars lock there cams usually but ive heard of a few ppl who dont lock them it helps with spooling etc. send that 6.2 to henson have him fix it
Where did you get the engine from??