I would like to make this as a 5 stone ring and I seem to be running into trouble trying to do a proper curve from 2 views for the additional stones, because it's not a curve I can make from the right side view when the first side stone becomes the reference point. Any tips for using this method to make it a 5 stone? I'm also having one pipe end be, say, .6mm radius and then it tapers down to .5mm radius at the other end of the pipe, etc and so on. Thanks!
I am assuming (roughly measured) that the Main Stone is 5mm (0.50 carat) and the side stones are 4mm (0.25 carat) so the Total carat of this ring is 1 carat? :)
Hi PJ, I have 6 years experience with 3Design CAD and Zbrush, I want to bridge over to Rhino to increase my knowledge of all things Jewellery CAD. Do you have a video on CADing with cushion and emerald cut stones?
HI Joe, My course "Rhino 6 Jewelry Stone Setting 3D Modeling" cover everything about the stones from model to setting. Please check it out at pjs-school.thinkific.com/courses/StoneSettingModeling
Mam I don't know whearther you will check it or not.. I really want a vedio with accurate measurements so that it's more suitable and convenient for us to learn better. As cad is all about accurate measurements right.. I really want to r Learn from you..
Hi Anuja, Yes, CAD is meant to be accurate. If you like to learn from beginning, you can check out my new Jewelry CAD Course that cover most of everything you need to know to do the Jewelry CAD Design. www.pjchendesign.com
if you want to know how to build stone. I have couple videos here for you to check it out. ua-cam.com/video/hOyFO5pScoc/v-deo.html and ua-cam.com/video/JsXg10lhGm4/v-deo.html
Thank You much for spending Your valuable time with teaching the community, Mrs. Chen !
You are very welcome
고맙습니다.
You are welcome!
Every time I watch your video I learn something new..... Thank you very much Ma'am....
My pleasure 😊
thanx PJ . I have done a lot of these type of rings but the long way around you make it look so easy
😀, It takes me few times to try but come out a good result to share.
I would like to make this as a 5 stone ring and I seem to be running into trouble trying to do a proper curve from 2 views for the additional stones, because it's not a curve I can make from the right side view when the first side stone becomes the reference point. Any tips for using this method to make it a 5 stone? I'm also having one pipe end be, say, .6mm radius and then it tapers down to .5mm radius at the other end of the pipe, etc and so on. Thanks!
Great video PJ!! Thank you.
You are welcome, Karen!
Hey where are you from?
Is this a trellis Setting and if yes then why don't you make collate of these stones
Super, buen vídeo PJ Chen!!
Thanks
Awesome as usual 👍
jawbreaker thank you 😄
Hello, I can't find the stones in Rhino 7. Could you please help me ? Thanks
Rhino 7 doesn't include the stone. I have round stone for download in the description.
Thank you very much for your response. I appreciate it
I still couldn.t find the stone, sorry. Please, could you do me a favor and paste the link here for me? Thank you!
Very helpful video PJ! I have RhinoGold but I really want to do it with Rhino itself. These videos are great!
David Conger thanks David. I do everything with Rhino barebones. It is a cool App.
I am assuming (roughly measured) that the Main Stone is 5mm (0.50 carat) and the side stones are 4mm (0.25 carat) so the Total carat of this ring is 1 carat? :)
You can use any desired size stone for this type of ring 3D modeling
sir Thank you very much sir you are very easy and simple language teaching sir very helpful your all series sir
Shiv a glad to help.
Thank u so Much...❤️❤️
Most welcome 😊
Hi PJ, I have 6 years experience with 3Design CAD and Zbrush, I want to bridge over to Rhino to increase my knowledge of all things Jewellery CAD. Do you have a video on CADing with cushion and emerald cut stones?
HI Joe, My course "Rhino 6 Jewelry Stone Setting 3D Modeling" cover everything about the stones from model to setting. Please check it out at pjs-school.thinkific.com/courses/StoneSettingModeling
Nice! 👍
Thank you!
Great video
Glad you enjoyed it
Very nice and simple...thanks
You are welcome!
Thanks for Sharing..!!!
Thanks for watching!
Thanks PJ
You are welcome!
Very thank you P J sir
Shiv a You are welcome!
Wts size of stones roughly...
It was long time ago when I made the video. I don't quite remember, but any size around 4-6 mm should work fine.
Nice work
john singh thanks, John.
Mam I don't know whearther you will check it or not.. I really want a vedio with accurate measurements so that it's more suitable and convenient for us to learn better. As cad is all about accurate measurements right.. I really want to r Learn from you..
Hi Anuja, Yes, CAD is meant to be accurate. If you like to learn from beginning, you can check out my new Jewelry CAD Course that cover most of everything you need to know to do the Jewelry CAD Design. www.pjchendesign.com
@@PJChenJewelryDesign thank you for the reply, and yes I want to learn, so how can I get to you. Can I have your email ID mam.
some new commands there for me, thankyou
Wildtrout you are very welcome !
beatiful thanks
You are welcome, Henry!
Nice
Thanks
ainda chego la...linda peça
Thank you!
1:34 How did you do that? I dont really understand it. how its coming from the same line?
Sir new video matrix na upload karo
Very nice bro but plz make free stone video
if you want to know how to build stone. I have couple videos here for you to check it out. ua-cam.com/video/hOyFO5pScoc/v-deo.html and ua-cam.com/video/JsXg10lhGm4/v-deo.html
you made wrong that is not proper way is lazy way
Interesting! could you share your way to build this model?