Bancroft RMS Titanic 1/200 Scale RC Boat Overview | Motion RC
Вставка
- Опубліковано 10 кві 2023
- Bancroft’s Elite Series of liners presents the 1/200 scale Titanic! Display this museum piece on your mantle or astonish your RC boat club with this functional RTR (Ready to Run) RC historic piece. Links below:
US Link: www.motionrc.com/products/ban...
EU Link: www.motionrc.eu/products/banc...
Motion RC Merch available here: motion-rc.creator-spring.com
Join this channel to get access to perks:
/ @motionrc - Розваги
Nice video. The curvature that you see in the hull and subsequently the superstructure is called sheer. I've found that to minimize the detachable decks warped appearance required sliding it backwards angled just a tad, thereby landing the aft portion of the superstructure 1st followed by the bridge. It keeps that unsightly gap in the back from showing or becoming so pronounced. Also, don't over tighten the center screws or it bends the deck as well. Cheers
But the remote-controlled iceberg on a scale of 1:200 is still missing.
With titan sub! 😂
@@pricelessppp unable to reach 1/200 of 3800m
It needs to sink too! Add some water tight compartments so it sinks right!!!
I’ve been wanting this for years for my self beautiful ship 🚢
it's even more impressive in person
"Still scale speed" *torpedoes through the water doing maneuvers that would kill more passengers with flying furniture than any iceberg ever could, while casually parting the seas and pushing along a wall of water at least 10 meter high* xD
😂👍
“Scale speed” would look ludicrously slow. Titanic cruised at 21 knots (24 mph). Divide by 200 and that’s 0.12 mph. It would be like watching grass grow.
the "rigging" between the masts at the top is the antenna for the wireless morse system
You actually want to get the waterline about a quarter inch BELOW where the red meets the black. That's the 'antifouling line' where the antifouling paint ends, and that red paint is meant to keep barnacles off the side of the ship. Usually the ship would be riding just below that line to account for wake or other disturbances splashing the barnacles up against the side of the ship. If your waterline is RIGHT at the red paint line, there's no protection just above the water.
G deck is right where the black paint end and the red starts. The ship actually had a bit of red above the water. He added a little too much weight
@@ryans413 That's... exactly what I said
Thats a beauty!
The waterline is a little to high. Aside from that, great model!
so majestic
Why are the life boats uncovered. Doesn’t it rain in the Atlantic?
I have never wanted something more. Just need to save some money now. Lol
Love the detail. Pretty sure the water didn't get that high on the sides when it was underway. May have to buy this just for display.
I don't care what anyone says, this is freaking awesome!
Ordered mine yesterday! Can’t wait for it to arrive!
Where do you order one?
Did it sink on its maiden voyage…? 🌊🚢 🤣
Awesome model
They gotta do Olympic and Britannic as well
Lets see it sink then
that would be the same has flushing 1400 bucks down the drain
Wondering if they ever think about doing our famous great lake ore freighter "Edmund Fitzgerald" that would be my dream to see. Im pretty sure many others.
Edmund Fitzgerald would be awesome. I'm going to put Gordon Lightfoot on right now.
Another orsum detailed Ship. I want her, let’s hope EU store will be back in stock soon. You know I need one James 😉
Wow! I'm sold!
Love it ❤
Pretty cool
Have you ever seen the 2 part tv miniseries from 1996 with Tim Curry & Catherine Zeta Jones? Still not tired of watching that!
When will this be in stock again? Looking to get one ASAP!
The captain you can do whatever you want, better that it didn't come out in the winter time😅
Damn those are SS United States speeds! Ive got the "other" rc Titanic thats much smaller but illuminated and WAY slower. Would you happen to know if the forecastle and bow have a waterproof deck as well? No way i wouldn't be taking this out during a storm. Mine isn't very watertight.
WOW🚢 titanic 👍
Does it come included with a floating iceberg?
Plenty of foam in the box to make one!
@@MotionRCen la caja dices te refieres a la tina pequeña que tienes
Wel uitkijken voor ijsbergen 😊
I Neeed one!!!
Nice nice. Does it come with a titan sub too as a bonus
It’s so beautiful just so expensive
Perfeito!!!!!
Is there a 'SINK NOW' switch, on the Remote Control ?
If someone wants a ready to run 1/200 titanic then i could see this ond being tempting. I would personally just buy the trumpeter kit and convert that to rc. It'd be more work but probably a bit cheaper and it includes lights.
Cheaper? Highly unlikely. Reliable? Not even remotely.
@@StreamwoodExplorer the kit can be bought for 350€ where i am at and the rc equipment would je around 150-200€ at least.
@@emilbt7588 How much is your time worth? It would take MANY man-hours to complete the Trumpeter to a high RC standard.
@@ministryofanti-feminism1493 I don't think anyone would really want to build one just to save money. Upfront cost can be lower, as you can spread out your purchases as you build. But primarily people who build them would do it because that's a huge part of the fun for them. Obviously that's not true for everyone, so it's great that those people have this option.
But I thought the same as OP, for that amount and given I'd still change quite a lot of things. I'd rather build my own.
(And then end up spending the same if not more and work on it for half a decade. But that's fine by me ;)
These going back in stock soon?
Awesome! I'll have to purchase one! Thanks for sharing!
I need this, Where did you buy this!
Actually should make a larger version, maybe 1/190 or 1/175
The model they had at the traveling Titanic museum display was 1/48 scale.
Is that a Trumpeter 1/200 kit? 🎉
Well done you got the funnels right , i see so many great detailed models but they get the funnels wrong , because they go by the james cameron model in the movie and its wrong.
I got a suggestion for a 2.0 version of that ship (if there ever be one) could you add the watertight bulkheads aka big non roof top walls in the bottom, and if possible could you add an iceberg that can float as well as make a small door at the front right bottom side of the ship and make it open and close to let water in? As well as make it all water proof? That would be amazing if you did that!
When do you think these will be in stock again ?
My problem is those screws, the lack of windows in the hull, and NO LIGHTS, also the hull is too thick wich would be unrealistic. I prefer the trumpeter model
Is the realistic, ship sinking iceberg, sold separately???
Is the Trumpeter 1:200 kit your base model? - the stern screw warning sign is on the wrong side of the railing
Will it be available in Europe?
Technically the waterline should be just ever so slightly below the line where the black and red meet like 1-2 millimetres below it
Does it come with a raft and 2 certain people? Xd
I have a burnt out hull of an rc titanic my parents found it in the mud when they were docking the canoe had it for years now I've been temped to put it in resin
I wish you sold the old Graupner 1:150 scale Titanic!
@Motion RC I have a question. Could you buy it already built or you have to build it yourself?
This model comes ready to run. All built up, just have to add a few accessories
I wanna buy one but they’ve been out of stock for months 😭
Can you guys do a Bismarck rc battleship review?
Eventually will I am sure. Going through them all one by one
That's good to hear.
How does it look at night?
Maybe stupid idea but why don't replaced these screws with some strong magnets and opening without screwing?
hello, this model of the titanic has a smoke effect and a lighting effect, thank you
👏🏼 👏🏼 👏🏼
Does it come with its own iceberg?
I will buy that with website, did you get it on?
our website. motionrc.com or motionrc.eu depending on where you reside in the world
is it true this 1/200 scale Titanic has been discontinued ? This is what I'm hearing , the manufacture of all the 1/200 scale has closed up the 1/220 scale line
Is it available in asia?
omg i want it 😭
Always out of stock. And I never get a notification when back in stock, even though I have both my emails listed.
Cool but it should move at half that speed for “fast” for scale
so how much? Websites dont work
If it comes with a mini submersible I’m in.
So funny. 😐
Now get an RC iceberg
That’s really cool, could have a lot of fun with this and customisation. 🫡
You missed the most important piece of information about the ship. How much did it cost?
This is always unavailable unfortunately...
Add some coal as a historically accurate ballast
You added a little too much weight there was a little red above the waterline when the ship sailed
Now all they need to do is make one that sinks and splits and I will be happy for the rest of my life.
Now you need an Rc titan sub💀
price?
Your Titanic model is low in the water and off kilter! Meaning she’s leaning toward one side!
Dónde lo venden?
*That's a great Titanic.What a great video! So cool!!!~ I have an RC Titanic!~~~^_^*
No extra lifeboats then 🙄
What
😂🤣😅
Its not neccesary. That ship is unsinkcable. Basically the boats its for transporting from one ship to another in normal dock operations. Extra boats only makes ugly the upper deck.
@@RmasterD At least you got it 🙄
Does it split in half?
do you want it to sink?
@@emilbt7588 yes
Hey I have one of their underwater drones, and can take the scale next level.
Where can you buy that RC titanic
Motionrc.com
Convert it to run on live steam 😏
to bad it does not have lites that would really add to this ship
How much?
No lifeboats?? Why am I not surprised. Nice use of Celine Dion though
Can you still buy this and Where?
Motionrc.com
Scale model of an iconic ship that sank on a moonless night - without lighting? Bummer.
Design flaw; they used unfinished plywood under the superstructure which warps badly and causes excessive sheer (curvature) which looks horrible. The only solution is to drill and glue nuts under the rear deck near the aft part of the superstructure. Drill through the superstructure and deck on top of the main hull so the holes align perfectly. When the nuts are good and dry, screw the aft part of the superstructure down flush. You can heat the bottom of the superstructure with a hairdryer on medium or high heat and it will flatten out so it will be easier to screw down flush. Why they did not add screws to the rear of the superstructure is a good question. Motion didn't have any parts. So I purchased small machine screws and nuts and washers from Home Depot. I glued the nuts to washers before attaching them under the holes drilled in the deck. The washers add extra reinforcement in the area. Maybe overkill but I didn't want any deformities in the deck from warping pressure. Looks much better.
6:59 In fact, no one knows how many blades the central propeller had. All available photos are photos of Olympic propellers, not Titanic. It is known that the White Star Line Company experimented with different propellers with different numbers of blades. There are reports of this. The three-blade gave more speed, but also more vibration compared to the four-blade. The central screw of the Titanic is hidden under the soil. The central screw did not have a reverse and worked only in the forward direction. The drive was from a steam turbine using exhaust steam after reciprocating engines (the energy of such steam was still enough to spin the steam turbine). Piston engines drove the side propellers.
I think a few years back, they found a Harland & Wolff Engineering Book with all their Ships Config. Stating that Titanic and Britannic both used 3 Propeller Blades where Olympic used 4 Blades to Test it out. But i think they changed it back afterwards to 3 Blades on the Olympic. ua-cam.com/video/HZrm79glrgE/v-deo.html
They showed them on one of the dives down to it's rusting place in the Atlantic, on a documentary. I can't remember witch one. But they found the number 401 on the propeller, and that's how they proved that it was the Titanic, and wasn't switched as the conspiracy theory said!
@@alfda_ came here to say that
And what would this cost?
www.motionrc.com/products/bancroft-rms-titanic-1-200-scale-1360mm-53-5-british-liner-rtr-bnc1024-003
The windows are not cut out properly on A deck, the super structure decks are painted plastic that clash with the wood veneer stuck on rest of the decks. Those square white boxes hiding the retaining screws look ridiculous and the water line is to high. You would be better off building the 1:200 Trumpter kit with wooden deck extras motorizing it.
The Trumpeter is for very experienced modelers and requires hundreds of hours of work, especially when you add the upgrade kits.
Those who will buy this RC model will do so precisely because it is ready to use, with an amazing level of detail for a model already assembled and painted. This is not the same audience at all. Just like me who, at the same scale, chose the Lego version...😅
It might collide with a swan and sink , thats me 1and half grand at the bottom of the lake.😢
Cheesy
You would think for $1400 you would have provided brushless motors ???
niatnya
It's nothing without lights
I'm almost certainly wrong about this but I feel like the Titanic might have been more than 200 times bigger than this model. I say that not knowing how big the titanic actually was. Just a hunch.
It's simple math. This model is 53.5" long. The real Titanic was 883' long. So first lets convert 883' to inches (883 x 12) which is 10,596". Now divide 10,596 / 53.5 and you get 198.05, or about 1/200 scale.
Not so Fast
Thought he was gone
Who?
@@MotionRC James! Thought he went into the I.T. side of motion
@@charlesrestivo870 I am still here Charles! I'm a marketing guy, just got some help now with Wesley as we have far to many products for me to do all alone
OK cool Your segments are always spot on .