Is it odd that so many of us are having this issue at the same time? In the middle of making dinner after a crappy week and I have half raw chicken and an err8 code. I am already dealing with stuck rusty screws trying to replace the inside of the toilet tank and now this. I don’t even know if I feel like this thing won’t catch on fire if I try following directions in Spanish when I don’t know Spanish. I should’ve taken Spanish, auto shop and plumbing in school. 🤷🏼♀️😫 if anyone is laughing at my crappy week so far, that’s a plus!!🤪😂
He said there are some fuses that je already replaced, and that did not fix his issue, so he connected those two wires, one coming from the resistor and the other from the relay on the left. As to why and how that works, I'm not sure, he's kind of vague about it.
it’s supposed to be to those fuses. You said that you tried the fuses, were they in the lid or did you just try the cables like this man in the video is showing?
Tried this fix but didnt work. Maybe i needed a translator to understand the reason the power was on when he removed the hinge post & then magically makes the err8 message disappear by reconnecting the 2 wires.
First wire he says comes from the resistor, second wire comes from the relay on the left side. He said there are some fuses that he replaced already, but that didn't fix it, so he touched them together and the error goes away. His way of explaining it is kind of hard to understand so I'm not sure why he did what he did, but this is what he said in Spanish. Maybe try finding those fuses and replacing them, cheers.
I just completely ruined my machine trying to take the side panel off because I couldn't figure out how to do it properly. Apparently There are two screws on the bottom and there are two on the handle. You have to remove the handle cover to get to them though. originally, my issue was a bad coil so I bought a new one and replaced it and after I did that I got the error eight. I think I got the error, because when I removed the fan and coil housing there is what I believe is the thermal fuse wrapped in a U shaped plastic like straw, and it's tucked into a slot below the temp gauge in the housing that holds the fan. When you remove the fuse that's in the straw like tube, and then you go to reinstall everything there is no way to fit your fingers back behind the housing and tighten the Lugnut. I think not being able to tighten things back caused the error to appear. In conclusion, they don't want anyone replacing anything, they want us to go out and buy a brand new machine 🙄 You shouldn't have to throw it away because the heating element goes out 🤦♂️
Yo había visto tutoriales malos pero este está a otro nivel no se para que los realizan si no ofrecen una solucion
Is it odd that so many of us are having this issue at the same time? In the middle of making dinner after a crappy week and I have half raw chicken and an err8 code. I am already dealing with stuck rusty screws trying to replace the inside of the toilet tank and now this. I don’t even know if I feel like this thing won’t catch on fire if I try following directions in Spanish when I don’t know Spanish. I should’ve taken Spanish, auto shop and plumbing in school. 🤷🏼♀️😫 if anyone is laughing at my crappy week so far, that’s a plus!!🤪😂
Thanks for just rubbing it in our faces that you fixed it 😂
¿Puedes mostrarme/explicarme cómo quitar el panel lateral sin romperlo? Tienes uno de los pocos vídeos sobre este artículo. Gracias.
Y para que sacar la tapa y los tornillos si el hilo rojo ya esta ahí disponible en tu cara.
Deberias explicar como desamblar las partes Para poder reparar
could you please share this in english as well if possible?
He said there are some fuses that je already replaced, and that did not fix his issue, so he connected those two wires, one coming from the resistor and the other from the relay on the left. As to why and how that works, I'm not sure, he's kind of vague about it.
Any idea whats code 8 is? Tried fuse but didnt work. Also those red wires already connected! Why to disconnect them?!
it’s supposed to be to those fuses. You said that you tried the fuses, were they in the lid or did you just try the cables like this man in the video is showing?
Tried this fix but didnt work. Maybe i needed a translator to understand the reason the power was on when he removed the hinge post & then magically makes the err8 message disappear by reconnecting the 2 wires.
First wire he says comes from the resistor, second wire comes from the relay on the left side. He said there are some fuses that he replaced already, but that didn't fix it, so he touched them together and the error goes away. His way of explaining it is kind of hard to understand so I'm not sure why he did what he did, but this is what he said in Spanish. Maybe try finding those fuses and replacing them, cheers.
I just completely ruined my machine trying to take the side panel off because I couldn't figure out how to do it properly.
Apparently There are two screws on the bottom and there are two on the handle. You have to remove the handle cover to get to them though.
originally, my issue was a bad coil so I bought a new one and replaced it and after I did that I got the error eight.
I think I got the error, because when I removed the fan and coil housing there is what I believe is the thermal fuse wrapped in a U shaped plastic like straw, and it's tucked into a slot below the temp gauge in the housing that holds the fan.
When you remove the fuse that's in the straw like tube, and then you go to reinstall everything there is no way to fit your fingers back behind the housing and tighten the Lugnut. I think not being able to tighten things back caused the error to appear.
In conclusion, they don't want anyone replacing anything, they want us to go out and buy a brand new machine 🙄
You shouldn't have to throw it away because the heating element goes out 🤦♂️
It’s in Spanish. Do you have one in English??
I tried it did not work and like you.Said the red wire was already eight together but I unsnapped it and Retide them did not resolve issue
i’m pretty sure the fuse is in the lid and those red cables that he’s showing go to them.
I need it translated into English
explicacion, fatal
Please in English
Tutorial muy malo
Muy muy mal 😂
No explicó nada