Here are the links for the trailer Kit - bit.ly/2ZSyREh Pre-built - bit.ly/3flgCha Links for the parts needed for the car build FS-L200 ➜ bit.ly/34ocd9N Starter Kit ➜ bit.ly/38fwzTD Toyan Engines ➜ bit.ly/3mvJRRh Toyan Parts ➜ bit.ly/2WsqvSg Noble NB4 ➜ goo.gl/s4MBTC
They should make a full wrecker body with a wheel lift so you can replace it with the factory truck bed and you can go tow a broken down scale truck or car.
Wow! Fantastic ingenuity mate. Here’s an idea: You could try some thin gasket material (or a piece of bike inner tube) between the bracket and the shell. It would serve two purposes: protecting the shell body and filling in the tiny gap or at least reducing it.
Awesome idea Steve! Keep us posted with the spring updates and drive. Now you just need another trailer to match the sweet color of the truck! Aaaah how projects evolve.....great truck!
IT LOOKS GREAT!! But I think you have the skid plate installed backwards? The opening normally goes to the back so the tractor can slid under the kingpin on the trailer. No big deal, just putting in my "2cents" .
Hi buddy love the rig. Question for the tamiya coupler connection. What tow ball would fit in that mechanism a normal say crawler tow ball or does it need to be a specific ball to lock in? Cheers can't find the part
Hey man my engine (fs 100) finally got here but the building manual isn't in there and the QR code won't work😡 but I am SOOOO GLAD you made a FULL video on building it that is DEFINITLY going to save me a ton of time!!! Love your Videos:)
Great project! I’m going to copy you but would you mind explaining how you provide power to the servos please? I’m using a Toyan FS-S100 engine but the starter ESC doesn’t have a BEC to provide ancillary power to servos etc. Thanks!
Cool ... I have a old Axial SCX10 2 Blazer the blue one .. 74 or 72 Blue Chevy Blazer. I was gonna get a Trx 4 then I seen the F-450 and I was 🪝hooked ..lol Long story short I plan to do the same thing when I get my F-450. #RC4LYFE
I need the measurements... Ground to 5th wheel. 5th wheel to rear bumper. Basically I need the neck measurements for the bed clearance. I'm building a gooseneck trailer for a guy that wants to use the same truck as the tow vehicle.
omg i have to get this im gonna get it right now and make it haul my 2 rc bulldozers, I might even make it faster somehow.. I'm not really into nitro rc cars
Here are the links for the trailer
Kit - bit.ly/2ZSyREh
Pre-built - bit.ly/3flgCha
Links for the parts needed for the car build
FS-L200 ➜ bit.ly/34ocd9N
Starter Kit ➜ bit.ly/38fwzTD
Toyan Engines ➜ bit.ly/3mvJRRh
Toyan Parts ➜ bit.ly/2WsqvSg
Noble NB4 ➜ goo.gl/s4MBTC
this makes me wanna subscribe
What’s the difference between a he kit and the pre-built?
P
I need the 5th wheel Hitch
I have been waiting for this for a wile. Thanks for the awesome content.
Hope you enjoyed it!
You are really loving this rig
Hey Steve. That is a great idea. Maybe put some camo on the truck. You don't have to. Just thinking. Take care Steve.
That would be cool
They should make a full wrecker body with a wheel lift so you can replace it with the factory truck bed and you can go tow a broken down scale truck or car.
That thing is so cool.You took an awesome rig and made it better. I gotta get one of those trailers. Well done mate
Thanks 👍
Wow! Fantastic ingenuity mate.
Here’s an idea:
You could try some thin gasket material (or a piece of bike inner tube) between the bracket and the shell. It would serve two purposes: protecting the shell body and filling in the tiny gap or at least reducing it.
Great idea man
Those are the simplest ideas that don’t come around often. Great fast thinking Steve. Like it.🇨🇱👍
That was a great idea Steve! Super clean looking!
Much appreciated brother. Nice and simple
Would love to see a tamiya semi truck build with a toyan engine in it pulling this trailer.
Great video mate :)
That would be cool!
Awesome idea Steve! Keep us posted with the spring updates and drive. Now you just need another trailer to match the sweet color of the truck! Aaaah how projects evolve.....great truck!
Looks good nice work keep on truckin 😀
Hi Steve, I thought you were going to use the body clips from the very start of the video lol 😂
I love it man it’s coming along great!!! 👍
It's a great job.~~~🚙🚑🚜
Thanks for sharing the good footage. ~~~^_^
Thank you 👍
Very nice idea! Great job! 👏
Great idea and that works out great I love how you can either have the 5th hitch on or off
Glad you like it
Looks pretty good. It will be interesting to see it pull the trailer, if you could find some aluminum body posts that should make it a solid set up.
Nice! This is exactly what I am going to do when my truck gets here. Thanks!!
Right on!
Where did you the hitch for the king pin?
AWESOME RC CAR MY FRIEND🙌🙌👏👏👏👏👏👏👏
Great job Steve now lets see the beast of an f450 in action pulling that heavy trailer full of cargo.
Maybe use styrofoam props for cargo 😂
Sucker is 10 Kilo
Mint dude shes perfect 👌
Absolute genius mate... looks amazing and really was simple as!!! Awesome!
Cheers man
Thats an awesome idea!! I still dont have the f450 but i do plan on getting one and setting it up like a hotshot truck
Nice bro
WOW wow 👍👍👍
Brilliant mate, can't fault it.
That's bang on mate, 👍
IT LOOKS GREAT!!
But I think you have the skid plate installed backwards? The opening normally goes to the back so the tractor can slid under the kingpin on the trailer.
No big deal, just putting in my "2cents" .
Dam good job do more like that
Very cool! 👌
That was a nice set up....
Great video 👍😊👍~~!!!
Hi buddy love the rig. Question for the tamiya coupler connection. What tow ball would fit in that mechanism a normal say crawler tow ball or does it need to be a specific ball to lock in? Cheers can't find the part
Hey man my engine (fs 100) finally got here but the building manual isn't in there and the QR code won't work😡 but I am SOOOO GLAD you made a FULL video on building it that is DEFINITLY going to save me a ton of time!!! Love your Videos:)
Cheers man
Thanks for the tip awesome idea!!!
No worries mate. Glad you liked it
Good idea buddy!
Ya good friend 👍🔔
Thanks for coming
Super like 👍
Thanks
Love the build 👍
Cheers man
So I went to a local hobby store here in Cali but drove 2 hrs to finally buy the cen Ford f 450 gray titanium
Nice, congrats bro
So I installed a curve light bar to the front bumper and now I’m going to add a led amber emergency light bar from my truck rc in a few day hopefully.
Nice
That’s perfect
Cheers mate
Super like, 😀👍
Thank you 👍
wow👍👍💯💯
AWESOME!
Get a cheap 2wd 1/10 buggy body cut out a section, it will make a perfect hood scoop.
Great project! I’m going to copy you but would you mind explaining how you provide power to the servos please? I’m using a Toyan FS-S100 engine but the starter ESC doesn’t have a BEC to provide ancillary power to servos etc. Thanks!
Power is supplied when plugged into the receiver
I just bought one just like that. Maybe I’ll do something like that
It's fun man. Good luck with it
Wow looks great works awesome, what kind of trailer is that?
HG brand, Check out the link in the description
excellent
I’m thinking about buying the Ford f 450
Good choice
Sticky rubber padding to stick on the bottom of the plate would work
Cool ... I have a old Axial SCX10 2 Blazer the blue one .. 74 or 72 Blue Chevy Blazer. I was gonna get a Trx 4 then I seen the F-450 and I was 🪝hooked ..lol
Long story short I plan to do the same thing when I get my F-450.
#RC4LYFE
Very cool!
Freakin sweet 👍
Cheers man
Hey what fifth wheel connection do I need to use to make this connection work
I wish these had leaf springs in the rear.
Ok,I know I Asked a lot of questions,but,does the metal plate and the black part of the trailer both come with the trailer?
No, they are custom
@@RCTanksTrucks247 ok
Where would I find a goose neck like hitch thing for my f450 rc truck
You have to custom make one
Can you do a drag set up with that 4c?
The trailer hitch for the goose neck where you get it
Where did you get all these trucks how much is it because I really want one so bad
You can buy the truck as a RTR electric kit from CEN
I need the measurements...
Ground to 5th wheel.
5th wheel to rear bumper.
Basically I need the neck measurements for the bed clearance.
I'm building a gooseneck trailer for a guy that wants to use the same truck as the tow vehicle.
You need second petrol tank :) it will last for longer
Where did you get the kingpin mounting plate?
I can’t seem to find out in 1/10 scale..
I made it
omg i have to get this im gonna get it right now and make it haul my 2 rc bulldozers, I might even make it faster somehow.. I'm not really into nitro rc cars
Awesomeness 👍
@@RCTanksTrucks247 Very.
What did you do to that cen 🤯🤯🤯
Made it a beast
I have to see if it pulls it. Do you have a run video?
Not yet, coming soon
What’s the part number for the hitch. I can’t find it. Thanks again.
We’re did u get that trailer
Here are the links for the trailer
Kit - bit.ly/2ZSyREh
Pre-built - bit.ly/3flgCha
1
What trailer is that
Links in the description bro
Where can I get that 5th wheel
Custom made
What scale 5th wheel is it 1/14th?
Yeah I think so
As far as I understand, you are no longer interested in tanks?
Yeah I am. Just want something new. There is nothing at the moment
@@RCTanksTrucks247 You said you wanted to install the new HL 6.0 equipment on some tank ... it was in the video about the T-34/85 with 6.0 ...
Were do you get the 5th wheel
Spare tamiya I had and I made the removal system
What 5th wheel hitch is this one
I made it myself but the unit is similar to the Tamiya ones
looks great but 800 dollars for something of that speed is not cheap
But it is not meant to be fast
What is the Trailer called?
Edit: just saw the link for it in the pinned comment
In the description bro 👌
All good mate
Nói nhiều quá
WHAT THE FUCK 400/600 FOR THE TRALER
Yeah all metal, what do you expect? $50?
Nói nhiều quá