Installing a odyssey Gtxs gyro with M2 brake lever on my b.m.x bike.

Поділитися
Вставка
  • Опубліковано 9 січ 2025

КОМЕНТАРІ • 10

  • @juanvalle4766
    @juanvalle4766 3 роки тому +1

    Only video thats shows that gyro spacer
    So thank you for that

  • @Lt_Krispy
    @Lt_Krispy 4 роки тому

    Nice frame

  • @limanovember8435
    @limanovember8435 4 роки тому +1

    Came for the M2 lever. Stayed to listen to you talk lol How's the lever holding up?

    • @robnein2594
      @robnein2594  4 роки тому +1

      Damn good lever. Not broke yet

  • @rusmo27
    @rusmo27 4 роки тому

    Hey Rob - thanks for the vid. I got a gts-x kit yesterday (split upper cable - might upgrade to the m2 later) and the first install attempt was a fail. There's a ton of slop in the upper cable and I'm not sure how to get rid of it. Going to give it a go again this afternoon.
    Everything still good with your gyro and m2 setup?

    • @robnein2594
      @robnein2594  4 роки тому

      Might try to pull some out the back. Get that gyro lower too pull those cables down. Or add a spacer in the head set.

    • @robnein2594
      @robnein2594  4 роки тому

      My set up has yet to screw up on me work really well.

    • @rusmo27
      @rusmo27 4 роки тому

      @@robnein2594 Hey Rob - thankd for the reply. Messed around with it a bunch this weekend with no luck. I think the headtube length on my bike is longer than yours, and the F25's steering tube length is just too short for my frame. My headtube is 5". Can you measure your Haro when you get a sec? Going to send some feedback to Odyssey - my guess is the F25's could use an update to lengthen the steering tube and provide a bit more clearance for bigger tires.

  • @michaelhubbell408
    @michaelhubbell408 3 роки тому +1

    nothing on how to assemble the m2? nvm