Very well explained. Much better than most instructional videos. I am installing the exact same door tomorrow. I can do it, no problem, but watching your video gave me some very good tips. The instructions that come with the door are okay but not great. Your video cleared some things up for me.
Thank you for this video. My original installer did not install it correctly and I always wondered why the doors keep coming off the rails ? Your video showed the proper installation.
Life saver moved into my new home and previous owner removed door and had a curtain due to breakage. I bought the same door followed your step by step and bam new door in and hour
I just installed a Maxx surround tub/shower and the versa double glass door...nightmare...one of the panels was damaged and obviously fixed but was slightly warped ..the customer couldn't return it so had to install...they even had the logo stickers upside down...I did it...but not a fan of Maxx products.
You mentioned using a rubber gasket for threshold, but that would require screws to hold it tight and in place. The caulk is a sealer and adhesive, so it also holds it in place. On the top of the jamb, that "header lock" goes behind the jamb (you should put it in place before putting the screw through the bumper and jamb). I just installed the exact same model, and the written instructions aren't very thorough.
I just had these doors installed and the morons never tightened the rollers they just left them loose that's why my doors keep getting out of alignment.
Ear protection just bc a guy is cutting metal, haha...clearly you've n😊t been on a lot of jobsites, if any. No one I've worked with complained about an annoying compressor, generator or even the gunshot of a Ramset...yeah basically a . 22 round going off inside of a bathroom only it's a nail instead of a bullet..the only "PPE" anyone bothers with are gloves and a mask or respirator if needed.
Nice to see a father and son work together, son has great attention to detail and listens well, good job
Thank you. I am hoping he would follow in my footsteps. We need more trades people.
Love the two tape measure hack for figuring out the middle of something. Great video. Thank you!
Thank you for watching
Thanks for sharing your knowledge and experience. I couldn't have done it without you.
Thank you for watching
Very well explained. Much better than most instructional videos. I am installing the exact same door tomorrow. I can do it, no problem, but watching your video gave me some very good tips. The instructions that come with the door are okay but not great. Your video cleared some things up for me.
Nice. Thanks for watching.
Very helpful. I'm planning on installing one of these kits soon. Much appreciated, and well done.
I have the same door and I followed your steps..great job. Keep it up buddy..
Great 👍 Thanks for watching!
Thank you for this video. My original installer did not install it correctly and I always wondered why the doors keep coming off the rails ? Your video showed the proper installation.
Thank you for watching.
Thank you so much for such a detailed explanation. God Bless you.
Nice to hear a good comment. Thanks for watching.
Good job I liked it and I like how you explained everything what’s go where
Thanks for watching.
Thank you guys
Thanks for watching
Good video. Unfortunately however, silicon won’t stick to an acrylic surround. An advanced modified polymer sealant is required.
GOOD JOB
THANK YOU WELL EXPLAIN
Thanks for the nice comment
Life saver moved into my new home and previous owner removed door and had a curtain due to breakage. I bought the same door followed your step by step and bam new door in and hour
nice
I just installed a Maxx surround tub/shower and the versa double glass door...nightmare...one of the panels was damaged and obviously fixed but was slightly warped ..the customer couldn't return it so had to install...they even had the logo stickers upside down...I did it...but not a fan of Maxx products.
Been there. Sometimes work is a struggle and you have push through with today's bad products and directions. Thanks for watching.
@@workwithkevin I enjoyed your video, I'm just surprised at the lack of directions and quality of Maxx products. Thanks for making the video!
The inside the bottom rail.. you caulked both sides? What if water gets in.. under how does it drain
caulked as per directions
You mentioned using a rubber gasket for threshold, but that would require screws to hold it tight and in place. The caulk is a sealer and adhesive, so it also holds it in place.
On the top of the jamb, that "header lock" goes behind the jamb (you should put it in place before putting the screw through the bumper and jamb).
I just installed the exact same model, and the written instructions aren't very thorough.
yes caulk works better just messier, thanks, i realized that later. nice doors just super heavy
Great Video. How did you end up securing the Maax cover to the base?
side walls w screws and caulk, the base just caulk as per instructions
About to install mines now. Glad I don’t have to hit studs
Pretty sure the ceramic bit is for the actual ceramic shower
If you pick those doors up with the big handles there is a chance the door will shatter in a million pieces.
Don't think so. They are heavy duty glass panels
Pro tip: put the other door inside before you hang the first
wish you had shown how to install the soft close system and adjust it.
Bummer. I am sorry.
I just had these doors installed and the morons never tightened the rollers they just left them loose that's why my doors keep getting out of alignment.
Bummer. I like to leave the instructions and tool for customer.
You can also provide hearing protection for your employee
It was my son and he doesn't like wearing the headset or plugs in his ears.
Ear protection just bc a guy is cutting metal, haha...clearly you've n😊t been on a lot of jobsites, if any. No one I've worked with complained about an annoying compressor, generator or even the gunshot of a Ramset...yeah basically a . 22 round going off inside of a bathroom only it's a nail instead of a bullet..the only "PPE" anyone bothers with are gloves and a mask or respirator if needed.