Installation - Finesse Peak Pivot Shower Doors

Поділитися
Вставка
  • Опубліковано 10 вер 2024
  • Step-by-step installation instructions for STERLING Finesse Peak Pivot Shower Doors.

КОМЕНТАРІ • 10

  • @robinkaiser5171
    @robinkaiser5171 Рік тому +4

    the bottom "seal" is ineffective, with a 1/2" to 3/4" gap underneath, water can easily bounce under the "seal" over the lip in the threshold and out onto the floor. I would appreciate someone from Sterling explaining how that "deflector" is supposed to work 100%.

  • @micahrandolph4397
    @micahrandolph4397 2 роки тому +4

    The seal is not very well explained at the bottom of the door

  • @hibanacigam772
    @hibanacigam772 10 місяців тому +1

    If the bottom is leaking and you're stuck with this door, you're better off spending $5-10 on a 0.165 inch T-style seal than using the poor excuse for a seal that's included. Cut it to the appropriate height and length and you'll greatly reduce or eliminate water getting beyond the threshold.

  • @CindyGrapperhaus
    @CindyGrapperhaus 2 роки тому +1

    What do you do when the bottom of the shower is a quarter of an inch off? I have had 3 people try to install this with no luck. They say the difference is too large to shim.

  • @TheDarkHour684
    @TheDarkHour684 3 роки тому +2

    My shower door exploded at 5:25 in the instructions :( It left us cut up. We were very careful, and put no pressure on the glass at all. Kohler is replacing it, but I am scared to try again at this point. This should not have happened!

  • @chachmedrano4119
    @chachmedrano4119 2 роки тому +1

    Dose the magnetic permit the shower from leaking

  • @johncarrillo7467
    @johncarrillo7467 3 роки тому +3

    why you dont play the video in spanish lenguage will be very improve thank you very much!!!