Scrap wood to Bandsaw long box. (5000 Subs. Thanks All)

Scrap wood to Bandsaw long box #woodworking #howto
in this video I show you how to make a bandsaw box. this is not your normal bandsaw box it's made from 4)1 x 4's. this video shows you how to Mill your boards square. next I show you how to layout your opening for your drawer, once this is done then you can take your peace over to the bandsaw. I make one cut following the straight line that I drew on the board that connects with the radius at the end of the drawer. I follow the radius with the bandsaw blade and continue on to the next radius on the opposite end. and once I completed the second radius the centerpiece which is the drawer falls right out. now that I've cut the drawer out, now I can cut the front face and the back face of the drawer and create the center section. I take the three pieces to the bench and do a little sanding careful not to send the very ends. after the light sanding now I glue the three pieces back together and you'll see did I have a cavity for the drawer. I finished the bulk of the sanding and install the drawer pull. now the bandsaw long box is completed. I hope you enjoyed the video thanks for watching. if you enjoyed it please hit the like button and subscribe to the channel. also hit the Bell notification for future videos.
Paypal: [e-mail]
Venmo: @Roger-Bell-24
Cafe Press': www.cafepress....
Cafe Press': www.cafepress....

[@lindah1591]

Very lovely.

[@WoodShopStop]

Thank you Linda.

[@garryk3166]

Your video is just what I needed 🙂 perfect for my needs and skill level 😃

[@WoodShopStop]

Glad to hear it. Thanks for watching.

[@woodworkerchris1903]

I've never built a bandsaw box, so you've given me some inspiration. Your build came out great, and congrats on the 5,000 subscribers!

[@WoodShopStop]

Thanks Chris

[@kennethomeara9848]

Congratulations on the 5k. I am sure you will reach the next milestone soon. Thank you.

[@WoodShopStop]

Thank you.

[@RonKillian]

Cool project. You Really need a fence for your bandsaw :) Get so much better results.

[@WoodShopStop]

Thanks Ron, I just made a fence for my bandsaw and it works great. See the video, it's very cool. I guess I just wanted to freehand it.

[@paintingjoy5036]

Nice

[@WoodShopStop]

Thank you

[@halkester9368]

Hals Wood Shop Thanks very clear start to Band Saw box. Thats what you do. And the band saw lesson. I want to testify to 1/4 inch blades, for years that's all I could buy. Recently I bought a Sterrett brand ouch $17 but the change has been like Massive. clean cuts, tracks, ease. Next you mentioned about not being able to follow the line on the drawer cuts, so was there a reason your blade guide was more than 2 inches above the wood, that's a big guide difference for any blade to cut straight. I see this so much on utube like the viewers need to see the bandsaw blade cut the wood and the guide up, almost like no saw guard cause its magic. Was it planned or habit that your guide is high?

[@WoodShopStop]

I'll have to look into that Starrett brand. I usually try to have less space between the guide and the workpiece I must have forgot that time when II switched out my blade. Thanks for the tips you're very observant I like subscribers like you awesome. Have a great day

[@DaveTucker-nx3is]

Great project. I'm inspired.
How did you address the cut line on the box when you went in to cut out the drawer. I'm a beginner so please excuse me if I'm missing something.

[@WoodShopStop]

Hey David, thanks for watching the video. No problem with your question at all. Talking about The first cut, I glued it back together after I cut out the drawer.

[@DaveTucker-nx3is]

Thanks for the quick response! Love your channel.