I can't see needing a rasp after the band saw. What I'd do is use sand paper and the inside parts that were cut away, and perfectly fit the curves that need sanding #OccamsRazor
A suggestion when applying a pattern to stocK! Do not spray the adhesive to the wood stock, place painters tape on the wood and spray the tape.This makes for a whole lot easier clean up . i do the same for scroll saw work.
Why do I never see videos where they show how they get the pieces flat enough to glue together without gaps? Was it all done solely on the bandsaw? What brand and model of bandsaw do you use in this video?
One issue guys: When drilling holes for the brass pin, the front has the hole drawn out, but the back, or bottom, doesn't. So what's the best way to drill the same exact place, since there's no pattern to guide us?
This flocking technique is probably the simplest way to cover up any of the rough imperfections left from the band saw. Plus, we just take any excuse we can to use the word "flocking"... Sorry. :)
I don't mind the flocking on the inside, but on the bottom of the lid is downright flogly. Yuck. I prefer felt to this. I just realized I bought a vintage box with flocking and it looks like fur on a rotting mouse.
You did not show tilting the table to 12*. You only spoke it. When doing an I structural video you should not gloss over anything. What’s simple to you is not so simple to others watching. FYI. I am well aware HOW to tilt my bandsaw table.
I just commented asked how they flatten out each piece of wood before gluing them up. I've watched a few box videos, and they never seem to say. Like you, I think it's kind of fundamental to show every step, of which the majority of how-to videos on UA-cam don't.
For the drawer box - getting spray glued paper off is a lot easier if you put blue tape on first, then spray glue the pattern to the blue tape.
Thanks for making it look easy. I feel confident enough to try my hand.
I love doing bandsaw boxes. There are so many fun projects. The limit is your imagination. Thank you for sharing. Have a great day and stay safe.
Thank you! You too!
Thanks for the 3 different approaches. Imagination is your only limitations
using old credit cards cut with pinking shears is a great idea. The boxes are awesome.
Thx for the lidded bandsaw box info!
Thanks Guys, those are awesome…..be safe and take care…..from south africa
Guess I missed the part about cutting out the drawer pieces. Nice boxes.
Definitely a great project to add to the toolbox. Thanks for the video and explanation.
You are welcome!
I can't see needing a rasp after the band saw. What I'd do is use sand paper and the inside parts that were cut away, and perfectly fit the curves that need sanding #OccamsRazor
A suggestion when applying a pattern to stocK! Do not spray the adhesive to the wood stock, place painters tape on the wood and spray the tape.This makes for a whole lot easier clean up . i do the same for scroll saw work.
Excelente trabajo 👌!
Verdaderas obras de ARTE!
Merecidícimo like maestros!
Saludos desde Reynosa México!!!
Wow, Great Job Guys. Just got a "New to Me" 1993 Delta 14... and I need some projects.
Thanks for sharing your boxes with us, please tell me what size blade you are using aswell as the bandsaw being used thanks
I just asked what bandsaw they used, so seeing that someone asked 3 months ago, I'll never be getting an answer.
Awesome job guys.
Great video! If you had done the top plug on the first box before gluing in the bottom you could have done it from the inside...
Why do I never see videos where they show how they get the pieces flat enough to glue together without gaps? Was it all done solely on the bandsaw? What brand and model of bandsaw do you use in this video?
that was very informative. thankyou
Glad it was helpful!
Are you using hide glue on the third box? Is there an advantage to that? Great boxes.
One issue guys: When drilling holes for the brass pin, the front has the hole drawn out, but the back, or bottom, doesn't. So what's the best way to drill the same exact place, since there's no pattern to guide us?
These are some nice box designs, thanks for the video. One note - flocking fiber should *not* be inhaled. Please, wear a mask for safety.
Where do you find the templates to print off?
marvellous
Why does the piece pull away from the fence at 13:13?
Probably just the pressure from the blade pulling it away from the fence. Not perfect but won't really affect the end product that much.
What size blades r u using “
What are the sizes to use
عمل جيد جدا فنان good 👍
I’d recommend wearing a mask or respirator while flocking. Other than that, nice job all of you!
You skipped the very first step. Where did you get the template ?
Watch and Listen. He tells you where to get the pattern.
Boxes are beautiful. But that cheesy felt on the inside, why?
We just want every excuse we can to say the word "flocking"... sorry, but you can dress up the inside however you'd like. :)
This flocking technique is probably the simplest way to cover up any of the rough imperfections left from the band saw. Plus, we just take any excuse we can to use the word "flocking"... Sorry. :)
I don't mind the flocking on the inside, but on the bottom of the lid is downright flogly. Yuck. I prefer felt to this. I just realized I bought a vintage box with flocking and it looks like fur on a rotting mouse.
You did not show tilting the table to 12*. You only spoke it. When doing an I structural video you should not gloss over anything. What’s simple to you is not so simple to others watching. FYI. I am well aware HOW to tilt my bandsaw table.
I just commented asked how they flatten out each piece of wood before gluing them up. I've watched a few box videos, and they never seem to say. Like you, I think it's kind of fundamental to show every step, of which the majority of how-to videos on UA-cam don't.
@adgieem1 That would vary from one bandsaw to another, so it would be best to read your bandsaw manual on how to tilt the table
👍🤝