The only thing that got me through this install was repeating in my head "it's just clips and screws, it's just clips and screws". Thank you for the guide. The two bolts under the glove box were 13mm not 14mm but most everything else was the same on my 2022 Gladiator. I also installed the Linkswell TS-JPJL12-1RR-6H head unit and for anyone else with the same setup I used the Orange wire labeled AMP EN and wired to the blue wire for the remote wire for the two component amps. There was an open ground bolt on the passenger side (3 bolts total from manufacturer) and a hole in the firewall under the rug (not sure it was oem or done at the shop that installed my subs and amp but that's where I ran the power, or I could have used a distribution block). Also I used two pillows stacked in the front to rest the head unit on when hooking up all the wiring and testing. I cut the 6x9 holes with the sound bar still installed and a Dremel, I didn't remove it from the Jeep. Sounds amazing so far. I still gotta run the 6x9 wire tomorrow morning because I was getting tired and it was dark when I finished the front speakers.
Amazing walk through vid. For the amount of work to get at the dash speakers, i would highly consider leaving them and just upgrading the doors and sound bar lol.
No foam used on the soundbar when attacking the template and speakers won't the eventually start rattling and definitely would have used nutserts to attach them
We run the full MBQ system in our shop JL and we’re more than pleased with the sound. We have the 800 watt stage 6 bundle along with the 400 watt 12” Tailgate sub which is phenomenal!
What an absolutely great video! Perfectly clear and understandable! Great job!
Thank you very much!
The only thing that got me through this install was repeating in my head "it's just clips and screws, it's just clips and screws".
Thank you for the guide. The two bolts under the glove box were 13mm not 14mm but most everything else was the same on my 2022 Gladiator.
I also installed the Linkswell TS-JPJL12-1RR-6H head unit and for anyone else with the same setup I used the Orange wire labeled AMP EN and wired to the blue wire for the remote wire for the two component amps.
There was an open ground bolt on the passenger side (3 bolts total from manufacturer) and a hole in the firewall under the rug (not sure it was oem or done at the shop that installed my subs and amp but that's where I ran the power, or I could have used a distribution block).
Also I used two pillows stacked in the front to rest the head unit on when hooking up all the wiring and testing.
I cut the 6x9 holes with the sound bar still installed and a Dremel, I didn't remove it from the Jeep.
Sounds amazing so far. I still gotta run the 6x9 wire tomorrow morning because I was getting tired and it was dark when I finished the front speakers.
Amazing walk through vid. For the amount of work to get at the dash speakers, i would highly consider leaving them and just upgrading the doors and sound bar lol.
Thank you very much! Yeah the knee speakers are definitely a bit of work.
"It's just clips and screws." :D
Plug and play.... ok!
any good word on 2024 Jeep Wranglers? I have had mine for 4 months now and havent seen any news yet.
Our MB Quart friends are working diligently to release the 2024 package!
No foam used on the soundbar when attacking the template and speakers won't the eventually start rattling and definitely would have used nutserts to attach them
Thank you for your input.
Are all of the Phillips head/7mm screws the same length? Just curious as far as having to keep track of what went where..
Yes, they’re all the same length.
@@trailseven sweet, thank you for your quick reply. That helps my mind.. Lol
@@rickschrunk6266 We can completely relate! 😁
Anything on the new 24’s? I have a 24 392 and the sound bar is designed differently
The 2024’s have been redesigned. We have options coming very, very soon!
Ok cool let me know, the sound system is horrible with the top and doors off
Will the soundbar 6x9 work if replacing speakers from the premium alpine system (w/ amp and sub) that came in a gladiator
Yes- This system is compatible with the Standard (non-factory amplified and sub) AND the Premium (w/ factory amp and sub) systems!
How does it sound 😒
We run the full MBQ system in our shop JL and we’re more than pleased with the sound. We have the 800 watt stage 6 bundle along with the 400 watt 12” Tailgate sub which is phenomenal!