I just stop the track pick up the mic and scream 'Yo Ultra/Tomorrowland come with me on this one' and then press play on the next track. Just kidding. Fave effect is echo with small amount of high or low pass filter combined.
Such great info, Phil. I am literally a rookie DJ and love learning all your tutorials! I pretty much DJ for family and friends parties and get together. Parties are so much more fun with great music! Thanks for the tips, Phil!
you are seriously the only DJ I am watching on youtube for tips and tricks just because you can explain everything so well and most of the time I emmidiatly understand what you're saying, thanks and go ahead explaining things like you always do
I love using the Echo 1/2, Echo 1/4, Flange and Reverb. I use it mostly in house or deep house music. When a track is playing and is about to come to a long part of the track where there is no drum beats or kicks, I prepare the next songs part where it has just the beat or kick with the high and mid EQ slightly lower depending on the beat's loudness. I slowly bring it in, in a loop just before the start of the "no beats part" of the track that is playing, slowly increasing its volume. Then, I add Flange effects to the 1st song, then add Echo 1/2 to the drum beat track in the middle of the "no drum beat part", then change to Echo 1/4 before the the 1st song restore to its own beat and adding Reverb effects. Just before the beats on the 1st aong comes back, quickly turn down volume fader of track 2 while still pressing Echo 1/4, release Echo 1/4 on track 2, release flange effect of track 1, then release reverb effect of track 1. It's like a soft EDM effect on the music and it will keep everybody dancing, most especially when you come across tracks with long no beats part. Some people gets bored easily or finds it hard to dance without the beats. I hope this made sense. I am not a professional DJ. I only use a DDJ-400 and play just for close relatives and friends. I enjoy your contents...keep it up! Cheers and more power to your channel!👍 www.mixcloud.com/DJ_Nei_Nemo/
Hold echo added with echo can get creative too, creating your own custom tale to any track. Or echo applied to a spin back on platter gets you into alot of track transitions. Great advice to new djs!
I am using DDJ-400 with Recordbox: There are some ways to make echo effect with such a setup: 1) The easiest way is to select "Echo" for the FX, turn the FX knob to the 9 o'clock position (or higher), and cut the volume of the track you applied echo to. 2) Go to Pad FX settings and select "Echo'' , apply to one of your pad buttons. It works with literally just pushing that one button at the moment you want to cut the track (do not forget to hit play on track 2 and pause the track 1 before turning Echo off) If you have intros/outros, you could also beatmatch, but it is much much harder to make smooth transitions that way.. Bonus: You could also use backspin or vinyl brake to add more variety in your sets...
I mostly use the "Spiral" effect on the last beat. Just before the break. From there on you have to time to other track to play. No FX pack needed and free. Did it once from a house track to a happy hardcore track (much faster). People knew the incoming track and got a nice reaction from the crowd.
I have a Pioneer DJM-909 and it has a Ducking Echo effect meaning the echo out effect automagically starts when I bring the fader down on the outgoing track. Can’t live without it. No dial turning!! Plus you can effect only certain frequencies. Meaning if you don’t want the low frequencies to echo out( cuz it usually sounds a bit muddy if you do) you can cut them out. Amazing mixer!
Looping seems to be the most useful tool for transitioning. Ive already seen two different transitions that use it and i'm confident there are more uses for it.
Amazing crystal clear teaching! I learnt much of your lessons just by trial and error, before Djs started to share knowledge. Echo out is a simple and trustful way of transition between genres or tracks with different BPM! I just add it to skills with reluctance, because I believed is a dummy way out! :)) But your lesson confirmed it is a good thing! Note: On Traktor S4, autoloop doesn't give that similar round-sound of echo out, it is just looping brutally. My preferred effects on EDM are Chopping - good for transition between the same BPM-, Flanger and Echo! Thank you, Phil, you are awesome, funny, the video shows exactly what are you speaking about, big Hug!
I don't know if I fully agree with just using "echo out on 1/2". If I want to go from 128 or around it I use it with a "drop" fx so a hard bass fade out and drop something super popular depending on my crowd. As a professional mobile DJ for 8 years different tracks have different transitions. There are also dj tools (songs) that have transitions from a high bpm to a low bpm that help out a lot
Pan delay gives a nice transition effect...put the knob at about 1 to 2 o' clock and when you are about to transition, turn on the effect and fade out.
I love tremolo. Its not quite the same as quickly varying the volume between low or off/mute and high, bevause then i would just use the volume slider...i love tremolo, ill often use it in blending parts of the song im going to play with what im playing. Its also great during long held notes with vocals or just synth. Tremolo is more an oscillating effect using colume vs higher and lower levels
Thank you Phil!! I have always wondered how to echo without having to use the effects. I never ever thot of Autolooping it. You make it look so simple. Thank you. 💯👍
I think the echo out is the most fun loving fx for me, (I'll try that wolf gang pack from sersto) and I'm really willing to learn how to use it effectively and clean thanks for the tips I'm really gonna try it..thanks
How come the track you transitioned out of with the clean echo out didn't keep playing audibly (since it was still playing if there is more time left) when you brought in the next song by Eve ? you didn't pull the fader/volume down on deck 1 and you couldn't hear that song anymore though even with crossfader in middle to hear both decks...
Great video and super useful! Echo and reverb out are great ways to add dynamics to the performance and it provides a great time to talk to the audience.
Echo fx in software like Serato or Rekordbox is beatmatched, which means if you haven't properly analyzed your tracks and aligned the beatgrid your echo fx is going to be off-beat in your mix. As for the 'echo out' effect, you can accomplish the same thing in other software with a simple echo combined with use of the high pass filter. If your filter is an all-kill filter it accomplishes the same thing if you turn up the filter while you turn up the echo.
Echo Out via the one beat Loop, don't like via Effects Button. Your tutorial made it very simple, I tried explaining this to someone and it took too much effort to explain.
Difficult to pick just one effect... Beat Grid, Echo, Reverb, Flanger... I use about half of the default VirtualDJ effects, depending on the song(s). And, then there is the Sampler... A good Bass Drop can help you transition.
No joke, I've actually given up on getting a smooth echo-out after trying for at least 5 years. I've had software and mixer hardware echo-outs and I can never trigger it on the right beat so I stopped trying. Favorite DJ effect that I can't do without is the vinyl brake because I'm Mr. DJ drop mix, rofl. Forreal though.
You are a pro sir. Im fixed on beat matching...but really need to move on. While it's the defacto transition, for genre and big bpm shifts, you need something like this in the tool bag. My DDJ-SB3 has some cool transitions Inc. echo out built into the pads. Thanks Pioneer and thanks muchly to you Phil.
The loop is good ..just best pick loop ...put master tempo on enter the slow track already with short loop but must be compatible and put the master tempo bpm match ... Its tricky ...but with the right tracks and the right loops ... it can be done nicely ... Just add some effects and cut down the loop to going down to the original slow track pitch lock . shorter put some sample for the chop off ...like sound effect ..zap .wind . Jet anything .. :)
I loved the tutorials on drop mixing using the echo and the loop. I had noticed that when you applied the echo and hit the play button , the volume is still on with the up fader, the previous song is still playing although the echo was applied. Shouldn't the up fader be brought down immediately?
Hi Phil! I’ve really enjoyed your tutorials on UA-cam. My name is George I live in Sweden I’m a DJ but I’m not a pro, I would like to take some lessons with you. How can I go about it? Thanks a lot in advance
Even though I have watched so many of your videos, each and every video I feel disconnected xD NOT because of you, just because of the music choices lmao I just like edm progressive house or melodic dubstep xD
I think You can not beat Fade in and out at the right time, Echo out is a great one, When I play EDM I love to have a battle with que points because with stuff Like Excision you can not go wrong. Softer stuff I would say just follow the BPM. Thanks Phil have subscribed.
What is the title of the next soundtrack of yours?? I really appreciate your next track after echoing..it will boom the crowd hearing that soundtrack..
I always watch and follow the things which are showed in the tutorial. It has been very helpful and very useful. I am still new to Serato DJ Pro. I own Rane 72 and Rane 12’s so I am still a newbie to Serato DJ Pro and my Rane system. Please come up with more Serato DJ Pro tips and videos. Thanks a ton Sir. You biggest fan from India 🇮🇳
Not so much of an effect, but just a big record scratch backward when I get hit with a bizarre ass genre change Like... Drake's 'God love' to Frankie Valli's 'Grease'. Some things just can't be mixed (or are probably not worth the effort) so I just highlight the switch up. Come to think about it, I might have seen it on one fo your videos.
Enjoyed the video? 🎧🎶 Take your DJ skills to the next level by clicking here: philharrismusic.com/upgrade!
Also if you want to learn how to produce your own dance music www.edmcoaching.com/ !
😂😂😂😂
Can you make a complete tutorial on serato pro please. Just subbed, you give great info! Thanks!
Thanks that video help me out.
I just stop the track pick up the mic and scream 'Yo Ultra/Tomorrowland come with me on this one' and then press play on the next track.
Just kidding.
Fave effect is echo with small amount of high or low pass filter combined.
ParadigmShifta lmaooooo so true
*kills track* "I need y'all at about a 10 right now" *drops next track*
I double chin laughed on this
You are my hero 🤣🤣 great comment.
Phil you explain things simply clearly and to the point, you are much appreciated sir 👍
Michael Christopher why don’t you marry him then if you love him so much
Such great info, Phil. I am literally a rookie DJ and love learning all your tutorials! I pretty much DJ for family and friends parties and get together. Parties are so much more fun with great music! Thanks for the tips, Phil!
you are seriously the only DJ I am watching on youtube for tips and tricks just because you can explain everything so well and most of the time I emmidiatly understand what you're saying, thanks and go ahead explaining things like you always do
I like using Flanger. I typically use it on the build up to the drop
Hey Phil,
Just want to say thank you. just started Djing for fun "bedroom dj" lol and your videos have been super helpful! Thanks again!
I love using the Echo 1/2, Echo 1/4, Flange and Reverb. I use it mostly in house or deep house music. When a track is playing and is about to come to a long part of the track where there is no drum beats or kicks, I prepare the next songs part where it has just the beat or kick with the high and mid EQ slightly lower depending on the beat's loudness. I slowly bring it in, in a loop just before the start of the "no beats part" of the track that is playing, slowly increasing its volume. Then, I add Flange effects to the 1st song, then add Echo 1/2 to the drum beat track in the middle of the "no drum beat part", then change to Echo 1/4 before the the 1st song restore to its own beat and adding Reverb effects. Just before the beats on the 1st aong comes back, quickly turn down volume fader of track 2 while still pressing Echo 1/4, release Echo 1/4 on track 2, release flange effect of track 1, then release reverb effect of track 1. It's like a soft EDM effect on the music and it will keep everybody dancing, most especially when you come across tracks with long no beats part. Some people gets bored easily or finds it hard to dance without the beats.
I hope this made sense. I am not a professional DJ. I only use a DDJ-400 and play just for close relatives and friends.
I enjoy your contents...keep it up!
Cheers and more power to your channel!👍
www.mixcloud.com/DJ_Nei_Nemo/
Hold echo added with echo can get creative too, creating your own custom tale to any track. Or echo applied to a spin back on platter gets you into alot of track transitions. Great advice to new djs!
I am using DDJ-400 with Recordbox:
There are some ways to make echo effect with such a setup: 1) The easiest way is to select "Echo" for the FX, turn the FX knob to the 9 o'clock position (or higher), and cut the volume of the track you applied echo to.
2) Go to Pad FX settings and select "Echo'' , apply to one of your pad buttons. It works with literally just pushing that one button at the moment you want to cut the track (do not forget to hit play on track 2 and pause the track 1 before turning Echo off)
If you have intros/outros, you could also beatmatch, but it is much much harder to make smooth transitions that way..
Bonus: You could also use backspin or vinyl brake to add more variety in your sets...
Do you set the "Echo" for the FX at 1 beat or less/more?
Loop with bit of echo and a back spin. Works well.
Hows the 400 working for you
Dude I use this a ton for bar gigs when jumping around music! It works perfectly no matter what you’re gonna jump to/from
I mostly use the "Spiral" effect on the last beat. Just before the break. From there on you have to time to other track to play. No FX pack needed and free. Did it once from a house track to a happy hardcore track (much faster). People knew the incoming track and got a nice reaction from the crowd.
spiral effect? where do you get that.. and for which controller/application.
Me too
I have a Pioneer DJM-909 and it has a Ducking Echo effect meaning the echo out effect automagically starts when I bring the fader down on the outgoing track. Can’t live without it. No dial turning!! Plus you can effect only certain frequencies. Meaning if you don’t want the low frequencies to echo out( cuz it usually sounds a bit muddy if you do) you can cut them out. Amazing mixer!
The echo out is my go to, especially after a certain phrase in a track. Appreciate your channel and content.#Salute
Thanks Phil after watching this video I have been using echo out for most of my mixes with different genre.
Looping seems to be the most useful tool for transitioning. Ive already seen two different transitions that use it and i'm confident there are more uses for it.
Amazing crystal clear teaching! I learnt much of your lessons just by trial and error, before Djs started to share knowledge. Echo out is a simple and trustful way of transition between genres or tracks with different BPM! I just add it to skills with reluctance, because I believed is a dummy way out! :)) But your lesson confirmed it is a good thing! Note: On Traktor S4, autoloop doesn't give that similar round-sound of echo out, it is just looping brutally. My preferred effects on EDM are Chopping - good for transition between the same BPM-, Flanger and Echo! Thank you, Phil, you are awesome, funny, the video shows exactly what are you speaking about, big Hug!
I love using echo out ....that's my favorite way to transition ...as a apprentice...home dj..😅😂👍
echo out is a major key!!! 🔑
Hey Phil, your videos are really helpful. I'm getting better by the day.Thank you for what you do. Keep em coming.
Been watching your stuff for a bit now and you're killing bruv! Keep it up!
I don't know if I fully agree with just using "echo out on 1/2". If I want to go from 128 or around it I use it with a "drop" fx so a hard bass fade out and drop something super popular depending on my crowd. As a professional mobile DJ for 8 years different tracks have different transitions. There are also dj tools (songs) that have transitions from a high bpm to a low bpm that help out a lot
i use echo out the most and thank you for this video its so simple its insane :)
I like the glass break fx. That works too. But thanks for your makeshift echo out. Definitely will be using that. Good stuff bro
Pan delay gives a nice transition effect...put the knob at about 1 to 2 o' clock and when you are about to transition, turn on the effect and fade out.
Got myself some ddj 200 just 2 start me off a few days ago and your vids are helping alot thank you
love to use echo out along with one or 2 others to give different effects.. echo out and phaser gives a cool sound
I love tremolo. Its not quite the same as quickly varying the volume between low or off/mute and high, bevause then i would just use the volume slider...i love tremolo, ill often use it in blending parts of the song im going to play with what im playing. Its also great during long held notes with vocals or just synth. Tremolo is more an oscillating effect using colume vs higher and lower levels
Thank you Phil!! I have always wondered how to echo without having to use the effects. I never ever thot of Autolooping it. You make it look so simple. Thank you. 💯👍
Thank you man!! Absolutely a great tutorial 💯 My favorite DJ effect is the Echo using the microphone 🎤 Dont know what I would do without it!!!!
Reverb is the fx I like the most✌️
This!
I think the echo out is the most fun loving fx for me, (I'll try that wolf gang pack from sersto) and I'm really willing to learn how to use it effectively and clean thanks for the tips I'm really gonna try it..thanks
You can also teach how to transition with LOW PASS & HIGH PASS FILTER please ;)
Wow Thank You for a great tutorial it helped me especially the wet dry knob explanation
How come the track you transitioned out of with the clean echo out didn't keep playing audibly (since it was still playing if there is more time left) when you brought in the next song by Eve ? you didn't pull the fader/volume down on deck 1 and you couldn't hear that song anymore though even with crossfader in middle to hear both decks...
That’s a cool alternative with the loop feature!
Great video and super useful! Echo and reverb out are great ways to add dynamics to the performance and it provides a great time to talk to the audience.
Echo fx in software like Serato or Rekordbox is beatmatched, which means if you haven't properly analyzed your tracks and aligned the beatgrid your echo fx is going to be off-beat in your mix.
As for the 'echo out' effect, you can accomplish the same thing in other software with a simple echo combined with use of the high pass filter. If your filter is an all-kill filter it accomplishes the same thing if you turn up the filter while you turn up the echo.
Thanks you for these absolutely simplified videos.
I love the pan effect on rekordbox. At 1/16 time it can really emphasize a small portion of the song
Great video 🔥🔥🔥 I'm exactly the 200th comments 😆😆
The epic reverb is a good one I use alot too.
TS Prod yup! The transition always sounds super clean
@@bassfixproductions6143 absolutely, it surely is.
Echo Out has a tempo. Reverb doesn't. Therefore Reverb is the way superior effect to transition song with varying bpm range.
Favorite effect is low pass/high pass, use those way too much in transitions.
Hi dj phil I learnt to blend your video
I like to to spin out of control in the right momment then relesed it like chop off with echo then drop the downtempo track.
Really Enjoyed this video Phil! Thanks for the detailed Tutorial! Subbed!
Great work! Like always!!
Great video. Personally i like the echo brake fade out, but this will be usefull💽🙏💜
Echo Out via the one beat Loop, don't like via Effects Button. Your tutorial made it very simple, I tried explaining this to someone and it took too much effort to explain.
Difficult to pick just one effect... Beat Grid, Echo, Reverb, Flanger... I use about half of the default VirtualDJ effects, depending on the song(s). And, then there is the Sampler... A good Bass Drop can help you transition.
No joke, I've actually given up on getting a smooth echo-out after trying for at least 5 years. I've had software and mixer hardware echo-outs and I can never trigger it on the right beat so I stopped trying. Favorite DJ effect that I can't do without is the vinyl brake because I'm Mr. DJ drop mix, rofl. Forreal though.
You are a pro sir. Im fixed on beat matching...but really need to move on. While it's the defacto transition, for genre and big bpm shifts, you need something like this in the tool bag. My DDJ-SB3 has some cool transitions Inc. echo out built into the pads. Thanks Pioneer and thanks muchly to you Phil.
mark seymour
If you’re looking for a good effect for deep bass drops, I use just a little bit of LPF with the HPF rising as the song is about to drop.
I like the echo effect done on your voice in this video. Very 😎
Very good explanationof the wet- dry knob!
The trick with loop saved me
Amazing! Thank you.
The loop is good ..just best pick loop ...put master tempo on enter the slow track already with short loop but must be compatible and put the master tempo bpm match ...
Its tricky ...but with the right tracks and the right loops ... it can be done nicely ...
Just add some effects and cut down the loop to going down to the original slow track pitch lock .
shorter put some sample for the chop off ...like sound effect ..zap .wind . Jet anything .. :)
WOW that's awesome again, I think it's super Cool
I'm trying to get into djing and your vids be on point. Very hepfu man🙏🏿
I think mine has to be reverb for when I'm throwing acapellas over the top of an instrumental so it sits into the track better!
Thank you. Great video!
I know you from your Ableton live course! :D
On Denon you can use the wash out effect under the sweep effects section.
I loved the tutorials on drop mixing using the echo and the loop. I had noticed that when you applied the echo and hit the play button , the volume is still on with the up fader, the previous song is still playing although the echo was applied. Shouldn't the up fader be brought down immediately?
Another great video! What is that hip-hop song you were using? Love that hook.
The name of the song is, let me blow ya mind by Eve
Donald Ray Thank you very much, such a dope hook!
Phil you are great thank you
Is there a difference between echo out and clean echo out?
Good dj technic..very helpfull..thanks
Excellent tutorial! Thank you!
Wonderful video dude, thank you!
My favourite fx is the filter and reverb
Thanks for your explain
be careful, the beatgrid must always be adjusted since the effects processor is the serato and it reads the information you give it.
Hi Phil! I’ve really enjoyed your tutorials on UA-cam. My name is George I live in Sweden I’m a DJ but I’m not a pro, I would like to take some lessons with you.
How can I go about it? Thanks a lot in advance
Fuck DJing!
That slapchop is something I need in my life!
Even though I have watched so many of your videos, each and every video I feel disconnected xD
NOT because of you, just because of the music choices lmao I just like edm progressive house or melodic dubstep xD
For an old DJ like me We called “Chop Mix”
I think You can not beat Fade in and out at the right time, Echo out is a great one, When I play EDM I love to have a battle with que points because with stuff Like Excision you can not go wrong. Softer stuff I would say just follow the BPM. Thanks Phil have subscribed.
Hey you explained it well thanks !
hi phils my favorite effect is flanger
my favourute effect is ofcourse echo
I've been making the same effect on Traktor for a while with a combination of Reverb + Delay and freeze
How do you use more than one effect at a time on traktor?
thanks i really will love to SAY AM GRATEFUL......
Nice!! Thx for sharing mate.
@9:17
"...a really cool trick that every DJ should have in their arse..."
-Phil Harris
Heyy phill,
Can make tutorial on how to do transition of any genre using dj echo out effect on rekordbox software
nancy fernandes it’s all the same, just use your effects. Any echo will work with those parameters turned up
You can just bring in a jingle at the end off a track then overlap the next track .
What is the title of the next soundtrack of yours?? I really appreciate your next track after echoing..it will boom the crowd hearing that soundtrack..
U da man!!
What if you're using traktor and it doesnt have Echo ?
You have freeze on delay on traktor
What’s up Homie I just scribe to your channel.
I want to see some Bollywood transitions.
Great video!
Does Rekordbox have "clean echo out" you may get from anywhere?
Yes it does
I always watch and follow the things which are showed in the tutorial. It has been very helpful and very useful. I am still new to Serato DJ Pro. I own Rane 72 and Rane 12’s so I am still a newbie to Serato DJ Pro and my Rane system. Please come up with more Serato DJ Pro tips and videos. Thanks a ton Sir. You biggest fan from India 🇮🇳
Keep it up brother.
Awesome thanks Dude
Not so much of an effect, but just a big record scratch backward when I get hit with a bizarre ass genre change Like... Drake's 'God love' to Frankie Valli's 'Grease'. Some things just can't be mixed (or are probably not worth the effort) so I just highlight the switch up.
Come to think about it, I might have seen it on one fo your videos.
REALLY HELPFUL