This was much more helpful than crankbros official video. They went way too fast and didn’t show the pieces as clearly. Thank you for this great guide 👍🏻
For the Eggbeater 3 you'll have to remove the axle. The body that you have left now is threaded into eachother. So clamping the left side (not the cage) and unscrewing the right side. Tools are needed to clamp, but be carefull of clamping to hard and bending the material (use an insert). After that the cage is loose and you can replace/retension the spring. I don't know if this is the case with all Eggbeater models.
@@Szyszku хороший вопрос, по не помню, мне витачивали из капрлона. По идее можно туда ставить игольчатый подшипник как у 3тих ЭггБитеров. Или юзай старзу 3тие
HI I have another problem ... externally the 4 wings of the pedal have an oscillation as if the central spring could no longer hold them still do you know how to help me? Thanks
It's video's like this that makes UA-cam worth it's weight in gold. Really helped me service my pedals. Ta, Mark
This was much more helpful than crankbros official video. They went way too fast and didn’t show the pieces as clearly. Thank you for this great guide 👍🏻
A GREAT video - Clear and concise...
Really well done! Thanks
Can the roller bearing refresh kit be used on an Egg beater 1 pedal set ?
best Eggbeater rebuild video on youtube. Thank you!
Great job!
Buenas 👋 😉
Yo pienso que usar azeite 2ow50 vegetale es mucho mejor para manteminiento del eje.
Saludos ✌️ 😉
Very detailed video. Great! Thank you! : D
Good Job!! Thanks.
what is the torque setting when tightening the bolt just before end cap is put on?
The torque setting for that nut is 4Nm and for the end cap it's 3Nm.
thnx, what about the coil spring ? Mine is loose, how can i change it? .
For the Eggbeater 3 you'll have to remove the axle. The body that you have left now is threaded into eachother. So clamping the left side (not the cage) and unscrewing the right side. Tools are needed to clamp, but be carefull of clamping to hard and bending the material (use an insert). After that the cage is loose and you can replace/retension the spring. I don't know if this is the case with all Eggbeater models.
@@MTBguide Thank you very much, I will try this I have the Eggbeater 11 TI; I guess they have the same process.
bearings size 6х13х5 686, you welcome
А какой размер бушинга?)
@@Szyszku хороший вопрос, по не помню, мне витачивали из капрлона. По идее можно туда ставить игольчатый подшипник как у 3тих ЭггБитеров. Или юзай старзу 3тие
@@OleksiiGerasymenko да я вот именно так и делать буду, но надо наверное узнать длину бушинга, а выбить пока что не получается
HI I have another problem ... externally the 4 wings of the pedal have an oscillation as if the central spring could no longer hold them still do you know how to help me? Thanks
Hi, you have to remove the spring and make a little turn at its end. You can find this vídeo in UA-cam
@@eng.ricardogarcia Thanks...I can't find the video 😢
@@tommasomonciniI'll try to find
These pedals suck, I have gone through two pairs of them in one year. Back to Time Atac now, life is good again.
Nothing about the spring.
ну так она и не входит в рефреш кит.
@@NitroCyclist Но Ютуб выдал это видео по запросу про пружину.