@@w2aew The 56 people that claim to not like it probably didn’t understand it because they’re too stupid. Sorry for the negative comment but I don’t see nothing wrong with this video except for a A big helped it for somebody that doesn’t know how to put power pole connectors on of all my years an amateur radio which has been 40+ years it’s the best connector out there for connecting power leads he just can’t go wrong but you need to invest in the special crimp tool. It’s well worth it. 73 all
Thank You again for the reference on installing these Anderson power poles. Every time I need to install on of these I always forget which way the hooks should face when putting them into the connectors...... always a pleasure to watch your quick and concise video to remind me. Thank you so much.
I pull this vid up every so often to remind myself how to orient the contacts before I crimp 'em onto the wires. I don't do this often enough to remember. :D
Years ago, when I had to work for a living, I would crimp about 10,000 crimps a year. I used mostly AMP connectors. I was told by the AMP people that a properly crimped connection makes a gas-tight connection and is superior to a solder connection. I also learned from my boss who worked on aircraft, they never soldered the connections, they were always crimped, because at the boundary between where the solder ends, the wire actually becomes more brittle and is prone to breakage, given enough flexing and vibration. I said with a "properly" crimped connection, that means the proper crimping tool and the proper connector for that gage of wire. I like the way the video showed two trains of thought on solder vs crimping. thanks for the video, well done - Jim
I didn't know there were actually recommendations on soldering vs. not soldering, but I believe the advice. Some metals are weakened by heat being applied, or made more brittle like the guy said. I either crimp or solder but very rarely both.
This video is 6 years old now and this is my first time. I now have things that have Anderson power-pole connectors on it. My first and only video I need to watch. Thank you sir well done!
Thank you for actually explaining the different kind of crimper, and how far to go, and not to go, when squeezing the crimper down. I was wondering whether I could just use the general crimper. I watched three other videos before this one and none of them explained it. I almost didn't even bother to watch this video, and now I'm glad I did.
I just watched your video. Bought some Power Pole connectors online with a tool for installing them online with NO directions at all. So, got the instructions here. I've been messing around with radio and electronics for years, and was licensed as a ham in 1970 but this is my first experience with these particular connectors. After destroying two of the metal inserts using a regular electricians crimping tool, I figured the connectors required a special tool so I bought one. It came with several of the connectors. After watching the video, I completed my first SUCCESSFUL Power Pole connector. That tool and your video made all the difference. Thanks. Lynn WB7PTR
You gave several tips that even the instruction manuals for the crimping tools don't cover. Excellent video. Sure wish I had found this video BEFORE I wasted a few terminals and some time figuring it out on my own.
After 17 years I finally had to replace my 12V regulated power supply, and my new one has Anderson connectors. Excellent video, clear and to the point. Well done sir!
I searched UA-cam to ensure I knew which way to orient the conductor inside the housing. I learned how the housings can mate together. I got a two-for-one today. Thank you sir and 73 to you.
Had to crimp some connectors for a new (to me) old radio and could not recall for sure the orientation and didn't want to guess/figure it out based on what I had around. Your tutorial is spot on. This really helped me out, six+ years later. Thank You!
Once I did all my Powerpole crimping the kit went back in the box. Over the years, every so often I get another cable to add connectors to, and when it doubt, I refer to your video which I have bookmarked. Your straight/extrapolation-free narrative makes this a keeper 👍
Very good instructional video, In my time using Powerpoles, about 8 years I've only ever soldered them. Never had a failure. I hold both the connector pins in a bulldog clip thumbtacked to the bench to hold the pins and to ensure correct orientation while the solder cools. The bulldog clip also acts as a heatsink.
This video was the perfect instruction for creating the connectors for my RIGRunner 4008H power bus for my ham radio set up. I had all the tools and necessary connector components but was struggling with the orientation. You made it easy. Great work!!
Thank you so much for a video that just sticks to the facts without fluff and silly music like too many other UA-cam videos! My grandson and I are into electric RC offroad trucks. We started out using Deans connectors on everything. Man, I hated soldering those things, but I used them on my entire fleet. My grandson, age 8 at the time, said he had trouble pulling them apart. Later, I decided EC5's were much better for his grip. They were also easier to solder. Therefore, I converted my entire fleet and all the batteries to EC5 connectors. My grandson appreciated the effort and said it was better, but he still struggled. I tried a bit of dielectric grease on the connectors and that helped, but not enough. It was then that I read about Anderson Powerpoles and how they are so easy to engage/disengage, have great power transfer and don't have to be soldered. Although I'm pretty good at soldering, I still get the occasional cold solder joint which gets too hot and melts during a run. I really hate it when that happens. Like Tom Maynard said below, it was about $150 later that I had the requisite tools and parts to convert my entire fleet yet again. It was worth every dime and every minute of time. I am happy, my grandson is happy. We both thank you for sharing your time and knowledge with us. P.S. - I was not able to push the pins into place by hand like you showed. However, I found a different video that showed it was OK to push on the back of the pin with a small flat blade screwdriver. I was used to doing that with EC5 connectors, so it was a "snap"!
I used this video 5 years ago to attach power cables together. I used it again to today to do it again, b/c I had forgotten the orientations. GREAT VIDEO...FB!!
i was this days old when i discovered you could crimp these. i have used power pole connectors for well over 30 years. i used them in my rc race trucks back in 1988-1991! the damn tamiya connectors would work loose and the deans connectors of the day back then you could hook them up in reverse polarity and fry you esc. they also didn't handle the high current of a modified motor as well. but the power pole was safe, never ever lost connection and could handle alot of current with out melting. i used a set today to hook up a cb radio!
Thank you for mentioning this info on your description section: "...These connectors are very popular with the amateur / ham radio community as well as emergency and first response teams (ARES, RACES, CERT) as a universal, reliable way to connect radio equipment to power sources (batteries, vehicles, power supplies)..." It solidified my decision to employ them myself in our robot! I really appreciate it!
Excellent! I had no idea by looking at these how they worked, thanks to the tube I no longer waste any time looking at things like this. I figured someone was an expert and it looks like I came to the right place...Thanks
Excellent video. If you're new to these connectors, you must watch this. Before I watched it, I first thought that 9:37 was way too long for a simple connection but it turned out that I was wrong, there is a lot of useful information in this video. Thank you for posting!
Thank you my e bike motor to battery red line the housing crumbled And ,I bought the red and black ! I thought ,I had to resolder all of them ! But they click in so ,I just click knew housing in ! Top stuff no info anywhere else ! Thanx a heap m8 !
Very well made video; I could not have figured it out without watching. I used these to connect my daughter's sub-woofer to the power/ground/remote of the vehicle since she sometimes wants to remove the big box from the truck for extra storage. This way, the 12 volt lead is not exposed to shorting against the chassis ground and there is not way to reverse them on re-install. The connectors are very snug using 8 gauge wire and required a little tapering of the insulation.
Those connectors are a bit strange but they seem to do a good job. The video cleared it up for me. That special tool he mentioned is definitely needed too.
After untold years now I've finally made the commitment to move all my various interconnects to Powerpoles. About $150 later and I have the requisite tools/parts/wire to get the job done. Your video is the #1 hit on the topic, and for good reason: Just the facts, ma'am; straight to the point, clear, and concise. Armed with the hardware and the knowledge gleaned here, I'm ready to rock and roll. Another great job. 73 de WZ9U
I found this instructional video to be very useful. Also, these connectors are new to me and I can see the advantage of their use. One note about soldering the crimp connections. I always solder my crimps keeping in mind to not allow the solder to wick beyond the end of the connector. In this way the point of bending is the same. For indoor use, I usually do not strain relief the connector ends unless the cable is going to be used a lot. For outdoor use, I always use something to waterproof the ends as a minimum means to protect from the elements. I will be looking up any information about UV and environmental restrictions for outside use. Thanks for your time and knowledge in making these videos.
Great video. I'm a new ham, new to powerpole, and was having difficulty getting my connectors to work with some 20GA. Push harder! After your video I'm an expert! thanks!
Great! Everything you said is exactly right. One thing... convention... turning the connector over and looking into it, "Tongue Top / Red Right". Easy way to remember. After you crimp, do a tug test, and if OK, good to go. I don't solder anymore, just the Tri-Crimp.
Nice video, 👍. I'm not a noob with making connections and terminating pretty much every type of wire under the sun, but I have never done a PowerPole. Your video is very straight forward and makes this as simple as it should be. There are waaaayyy too many people with sausage fingers and out of focus cameras out there trying to do how to videos, thanks for the nice video. My first set is on a powerwerx panel mount with dual pair connections at the Nav Station on our live aboard sailboat , its where the Ham set up lives.
The information was VERY well done. Only problem with the video was at one point the audio gets distorted. I tend to notice things like that quite a bit too because I work with audio and video a lot and am really picky about my sound. I got around that 15 to 30 second portion just watching what he was doing.
@@wb7ptr Yeah I noticed those things too, we're both from the same industry. I designed, pulled, terminated and installed Audio, Video and automation for decades. I miss it a little but glad I'm done now. Everyone moving to Bluetooth audio and also about every home control off their damn iphones. No money in that, not as cool either.
Thanks, well done I needed this for my E-bike connections and I've been an electrical cont all my life! Its always good to know the proper way of doing things.
Thank you for all your video work. I rarely pop up with anything to comment on. This time I just want to encourage you to do more very simple stuff. You would be surprised how many people don't get the simple things. My only comment on this particular video is that for exterior work a touch of dielectric grease pushed into the crimp before assembly by hand (just a bit, not like caulking a joint) will serve you much better than solder. Solder actually seems to cut the useful life of my crimps for exterior applications. No idea why. DE grease is great stuff to learn to use generally. Try it. You will be surprised.
Dielectric. Not conductive. It is used extensively to prevent what electricians call corrosion. We would call it oxidation. Either way, it greatly helps prevent increase in resistance at an electrical junction due to the effects of weather. I am not thinking of making a better junction. I am thinking of making an electrically stable junction. As to the solder joint failures, I am only guessing. I have emailed back and forth with a variety of crimp manufactures trying to get a document to use with an E inspector who would not allow solder in crimp joints. Bottom line - every company supported the inspector. They strongly condemn soldering crimped joints. They all seem to have different reasons. Mostly focusing on what tests they did to get their product UL/CSA approved. Because solder played no role in their approval, they will not recommend its use. Note: They make a distinction between use of tinned wire, wherein each individual strand is tinned, and amateur tinning of a twisted wad of strands. In my hands, the solder seemed to prevent water from flowing through the junction. Rather, water would sit almost permanently in the small cracks in the joint. After a while, something breaks. I do know that MIL Spec does not allow soldering exterior crimp junctions unless the "termination has been listed for use in solder applications." I think that says it all as far as code thinking people/engineers see things. Use the termination (crimp) as it was listed. Anderson crimps are not listed for use as solder junctions. Look them up in the UL White Book. Use the DVD. The hard copy is impossible to navigate. I hope I am making sense here. Too many words.
@@crocellian2972 You make excellent sense. I will use the dielectric grease for a charging point in the grill of my car. I was concerned about corrosion. Now I have the answer. Thanks for the information.
Great video. I have found that using a small flathead screwdriver to push the connectors in the housing is necessary to get that final click. You want the cupped section to be as far forward as possible and hook around the metal tab.
Soldering these definitely causes metal fatigue where the solder ends. I work with these a lot on autoscrubber battery connections. Past repair people have soldered them and after enough plugging and unplugging, the joint gets weak and eventually just falls off. Great video!
There is a saying to remember the proper orientation. When looking at the plug as if you are going to plug it into your eye, it’s red right, tongue top. I use these in my car. 30 auto breaker connected with 10 awg wire. I have a connector at the front grill and one on the passenger side floor. Works great for connecting inverters, battery chargers, etc. after the cigarette lighter end melted on my 12v tire pump, I cut it off and installed power poles on that as well, doesn’t even get warm. I even cut the house plugs off of a 12 awg extension cord and put Anderson plugs on that so I can stretch the tire pump back to the trailer. These things are great.
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
There is an art to teaching. It's a relief to listen to someone explain and articulate something so thoroughly yet efficiently. Thank you.
As I type this, 218,849 viewers have probably been helped by this clear, concise, and thorough tutorial. Many thanks to W2AEW....
All except for the 56 people that didn't like it.
@@w2aew The 56 people that claim to not like it probably didn’t understand it because they’re too stupid. Sorry for the negative comment but I don’t see nothing wrong with this video except for a A big helped it for somebody that doesn’t know how to put power pole connectors on of all my years an amateur radio which has been 40+ years it’s the best connector out there for connecting power leads he just can’t go wrong but you need to invest in the special crimp tool. It’s well worth it. 73 all
Thank You again for the reference on installing these Anderson power poles. Every time I need to install on of these I always forget which way the hooks should face when putting them into the connectors...... always a pleasure to watch your quick and concise video to remind me. Thank you so much.
I pull this vid up every so often to remind myself how to orient the contacts before I crimp 'em onto the wires. I don't do this often enough to remember. :D
Years ago, when I had to work for a living, I would crimp about 10,000 crimps a year. I used mostly AMP connectors. I was told by the AMP people that a properly crimped connection makes a gas-tight connection and is superior to a solder connection. I also learned from my boss who worked on aircraft, they never soldered the connections, they were always crimped, because at the boundary between where the solder ends, the wire actually becomes more brittle and is prone to breakage, given enough flexing and vibration.
I said with a "properly" crimped connection, that means the proper crimping tool and the proper connector for that gage of wire. I like the way the video showed two trains of thought on solder vs crimping.
thanks for the video, well done - Jim
Which makes me wonder how XT60 connectors became so popular
@@cameltoast XT60 connectors are almost certainly more reliable than the wrong size crimp terminal, crimped using pliers. They also look really solid.
I didn't know there were actually recommendations on soldering vs. not soldering, but I believe the advice. Some metals are weakened by heat being applied, or made more brittle like the guy said. I either crimp or solder but very rarely both.
This video is 6 years old now and this is my first time. I now have things that have Anderson power-pole connectors on it. My first and only video I need to watch. Thank you sir well done!
Thank you for actually explaining the different kind of crimper, and how far to go, and not to go, when squeezing the crimper down. I was wondering whether I could just use the general crimper. I watched three other videos before this one and none of them explained it. I almost didn't even bother to watch this video, and now I'm glad I did.
Your video is still helping people in 2022! Thank you sir for helping me wire my battery to my EBike conversion!
I just watched your video. Bought some Power Pole connectors online with a tool for installing them online with NO directions at all. So, got the instructions here. I've been messing around with radio and electronics for years, and was licensed as a ham in 1970 but this is my first experience with these particular connectors. After destroying two of the metal inserts using a regular electricians crimping tool, I figured the connectors required a special tool so I bought one. It came with several of the connectors. After watching the video, I completed my first SUCCESSFUL Power Pole connector. That tool and your video made all the difference. Thanks.
Lynn WB7PTR
I watch this video EVERY time I have to install a powerpole connector. Thanks for the great video!
Seeing how it is done especially the orientation, helped ENORMOUSLY
I am using the Anderson plugs for my Rockpals Solar Generator. Creating an extention cord for my 100 watt solar panal. Thanks for the helpful video.
I rarely use these, but when I do I have to refresh my memory with this video.
THANK YOU!!
This is my "Go To" instruction video.
Thanks, again!
You gave several tips that even the instruction manuals for the crimping tools don't cover. Excellent video. Sure wish I had found this video BEFORE I wasted a few terminals and some time figuring it out on my own.
After 17 years I finally had to replace my 12V regulated power supply, and my new one has Anderson connectors. Excellent video, clear and to the point. Well done sir!
I searched UA-cam to ensure I knew which way to orient the conductor inside the housing. I learned how the housings can mate together. I got a two-for-one today. Thank you sir and 73 to you.
Very useful video. I went from knowing nothing about powerpoles to assembling them correcctly just from watching. Thanks.
Just crimped my first powerpoles and they came out great - thanks!
very useful video, I bought 5 pair from aliexpress, couldnt work out how they go together, you saved me alot of headaches thanks
I am a new user to Anderson Powerpole connectors. Your video explained installation quite well. Thanks for taking the time.
Really clear 'how-to' video. None of the superfluous talking and useless chit-chat that a lot people indulge in. Thanks for posting.
EXCELLENT. TO THE POINT AND REASONS WHY EXPLAINED VERY CLEARLY
Had to crimp some connectors for a new (to me) old radio and could not recall for sure the orientation and didn't want to guess/figure it out based on what I had around. Your tutorial is spot on. This really helped me out, six+ years later. Thank You!
Once I did all my Powerpole crimping the kit went back in the box. Over the years, every so often I get another cable to add connectors to, and when it doubt, I refer to your video which I have bookmarked. Your straight/extrapolation-free narrative makes this a keeper 👍
Great video. I just purchased these connectors and the crimping tool and wasn't exactly sure how to use it but I do now thanks to you! 73
Thanks, man. 9 years after you made this video, it's still useful and awesome.
Top notch DIY instruction - concise, articulate, thorough. Great help for installing these ingenious connectors.
Very good instructional video, In my time using Powerpoles, about 8 years I've only ever soldered them. Never had a failure. I hold both the connector pins in a bulldog clip thumbtacked to the bench to hold the pins and to ensure correct orientation while the solder cools. The bulldog clip also acts as a heatsink.
Well done video. There are many vids on YT that explain this, but this video does it the best. Thank you.
Fabulous job teaching someone (me) with zero experience. Thank you.
Best demo I have watched hands down!
This video was the perfect instruction for creating the connectors for my RIGRunner 4008H power bus for my ham radio set up. I had all the tools and necessary connector components but was struggling with the orientation. You made it easy. Great work!!
Thank you so much for a video that just sticks to the facts without fluff and silly music like too many other UA-cam videos!
My grandson and I are into electric RC offroad trucks. We started out using Deans connectors on everything. Man, I hated soldering those things, but I used them on my entire fleet. My grandson, age 8 at the time, said he had trouble pulling them apart. Later, I decided EC5's were much better for his grip. They were also easier to solder. Therefore, I converted my entire fleet and all the batteries to EC5 connectors. My grandson appreciated the effort and said it was better, but he still struggled. I tried a bit of dielectric grease on the connectors and that helped, but not enough. It was then that I read about Anderson Powerpoles and how they are so easy to engage/disengage, have great power transfer and don't have to be soldered. Although I'm pretty good at soldering, I still get the occasional cold solder joint which gets too hot and melts during a run. I really hate it when that happens.
Like Tom Maynard said below, it was about $150 later that I had the requisite tools and parts to convert my entire fleet yet again. It was worth every dime and every minute of time. I am happy, my grandson is happy. We both thank you for sharing your time and knowledge with us.
P.S. - I was not able to push the pins into place by hand like you showed. However, I found a different video that showed it was OK to push on the back of the pin with a small flat blade screwdriver. I was used to doing that with EC5 connectors, so it was a "snap"!
Yes, I've done the same thing to properly seat the terminal into the housing (small flat bladed screwdriver).
Making up my first Anderson connections today. Your video was perfect to get me started. Many thanks! 73 KQ4AWC
Literally the only useful guide on this
Your method works. Installation of these connectors have been a real mystery, ‘till now. I just installed 6 with no spoils. Thanks!
Made my first connection tonight thanks to your video!
Just did this for the first time, thanks to your excellent video! 73
I used this video 5 years ago to attach power cables together. I used it again to today to do it again, b/c I had forgotten the orientations. GREAT VIDEO...FB!!
i was this days old when i discovered you could crimp these. i have used power pole connectors for well over 30 years. i used them in my rc race trucks back in 1988-1991! the damn tamiya connectors would work loose and the deans connectors of the day back then you could hook them up in reverse polarity and fry you esc. they also didn't handle the high current of a modified motor as well. but the power pole was safe, never ever lost connection and could handle alot of current with out melting. i used a set today to hook up a cb radio!
Thank you for mentioning this info on your description section:
"...These connectors are very popular with the amateur / ham radio community as well as emergency and first response teams (ARES, RACES, CERT) as a universal, reliable way to connect radio equipment to power sources (batteries, vehicles, power supplies)..."
It solidified my decision to employ them myself in our robot! I really appreciate it!
Thank you for showing the orientation of all pieces. Very helpful video! 73
Nicely narrated 👍
I've just used Anderson Power Pole connectors for the first time this evening. Your video was perfect in helping me understand what to do. Thank you!
Excellent! I had no idea by looking at these how they worked, thanks to the tube I no longer waste any time looking at things like this.
I figured someone was an expert and it looks like I came to the right place...Thanks
Excellent video. If you're new to these connectors, you must watch this. Before I watched it, I first thought that 9:37 was way too long for a simple connection but it turned out that I was wrong, there is a lot of useful information in this video. Thank you for posting!
Thank you my e bike motor to battery red line the housing crumbled And ,I bought the red and black ! I thought ,I had to resolder all of them ! But they click in so ,I just click knew housing in ! Top stuff no info anywhere else ! Thanx a heap m8 !
Nicely done. Every ham should be watching your videos.
Thanks Randy! They should be watching BOTH of our channels!
Also, George had a video during Ham Nation showing how to use Power Pole connectors.
@@w2aew Hey! great vid... Can you share what 'MALE' connectors to use with these ? Thanks !
@@silversrayleigh8980 There are no male or female types - these connectors mate with themselves.
@@w2aew Ah very convenient. But admittedly you worded it in a way that left me with a dirty image. Thank you !
Very well made video; I could not have figured it out without watching. I used these to connect my daughter's sub-woofer to the power/ground/remote of the vehicle since she sometimes wants to remove the big box from the truck for extra storage. This way, the 12 volt lead is not exposed to shorting against the chassis ground and there is not way to reverse them on re-install. The connectors are very snug using 8 gauge wire and required a little tapering of the insulation.
Perfect demo, I wouldn't know how to assemble without your video, THANK YOU!
Those connectors are a bit strange but they seem to do a good job. The video cleared it up for me. That special tool he mentioned is definitely needed too.
Thank you. Thorough and succinct. You'd make a great teacher.
Thank you. This is just what I was needing.
After untold years now I've finally made the commitment to move all my various interconnects to Powerpoles. About $150 later and I have the requisite tools/parts/wire to get the job done. Your video is the #1 hit on the topic, and for good reason: Just the facts, ma'am; straight to the point, clear, and concise.
Armed with the hardware and the knowledge gleaned here, I'm ready to rock and roll.
Another great job.
73 de WZ9U
Great! These connectors work great, and it's so nice when you've got everything converted over. Good luck with the project!
Thank you, you answered my question in the first 3 minutes 😃
Thank you for making this excellent video!
Nice video, short and to the point
I found this instructional video to be very useful. Also, these connectors are new to me and I can see the advantage of their use. One note about soldering the crimp connections. I always solder my crimps keeping in mind to not allow the solder to wick beyond the end of the connector. In this way the point of bending is the same. For indoor use, I usually do not strain relief the connector ends unless the cable is going to be used a lot. For outdoor use, I always use something to waterproof the ends as a minimum means to protect from the elements. I will be looking up any information about UV and environmental restrictions for outside use. Thanks for your time and knowledge in making these videos.
Great video. I'm a new ham, new to powerpole, and was having difficulty getting my connectors to work with some 20GA. Push harder! After your video I'm an expert! thanks!
Thanks for this. Very clear. If it has been a long time (years) since I last used Anderson power pole connectors, I like to review with your vid.
Nicely done and very helpful. Thanks for a great and very useful video!
I had to install some powerpoles to fix an underrated connector on my 3D printer and this video was really helpful...thank you!
Glad to help!
@@joeboxter3635 30. But you must match your cable with the current draw of the appliance.
Great! Everything you said is exactly right. One thing... convention... turning the connector over and looking into it, "Tongue Top / Red Right". Easy way to remember. After you crimp, do a tug test, and if OK, good to go. I don't solder anymore, just the Tri-Crimp.
Very helpful. Thanks for making my first experience with these connectors successful.
Hats Off!
Perfectly explained, great voice, good image.
I use liquid electric tape at the entrance to avoid dust and water from condensation.
You can use language very effectively to explain things. Very few people can do that. Thank you!
Thank you.
Thank you sir!
@@w2aew You are a Gentleman and a scholar.
Perfect presentation. Thanks.
Excellent presentation, clear, concise, just what I needed! Thank you for posting!
I'm just transitioning to power poles and this video was very informative! Thanks for the demonstration!
Nice video, 👍. I'm not a noob with making connections and terminating pretty much every type of wire under the sun, but I have never done a PowerPole.
Your video is very straight forward and makes this as simple as it should be. There are waaaayyy too many people with sausage fingers and out of focus cameras out there trying to do how to videos, thanks for the nice video.
My first set is on a powerwerx panel mount with dual pair connections at the Nav Station on our live aboard sailboat , its where the Ham set up lives.
The information was VERY well done. Only problem with the video was at one point the audio gets distorted. I tend to notice things like that quite a bit too because I work with audio and video a lot and am really picky about my sound. I got around that 15 to 30 second portion just watching what he was doing.
@@wb7ptr Yeah I noticed those things too, we're both from the same industry. I designed, pulled, terminated and installed Audio, Video and automation for decades. I miss it a little but glad I'm done now. Everyone moving to Bluetooth audio and also about every home control off their damn iphones. No money in that, not as cool either.
Your video was VERY helpful, now i KNOW that i need this system. Thank you (well done).
Thanks for the great video I’m new to the radio hobby
Everyone who do some radio stuff should really follow
I'm new to this thanks for showing connectors and how to cramping them !
Excellent and simple Explanation Good.. Thank you
Very good presentation. Thank you.
Thanks, well done I needed this for my E-bike connections and I've been an electrical cont all my life! Its always good to know the proper way of doing things.
YAH ! Never be afraid to not know. You don't know what you don't know. Especially with e-bikes. Even if you think you know...it's still a puzzle.
Something comes up every no and then that baffles even the experts :)
Excellent demo. Thank you. 👍
Thanks for the concise instruction. Kudos!
Yes indeed...Nicely Done. This has helped me to understand the procedure before assembling my power poll kit... Thank You...
a one stop view only once video. Thank you very much for your efforts!
Slick system. Thanks for showing 👍🇨🇦🍻
Very Nice job explaining the Powerpole connections. Thanks much.
Alan, thanks for the powerpole video. It was very straightforward.
Thank you for all your video work. I rarely pop up with anything to comment on. This time I just want to encourage you to do more very simple stuff. You would be surprised how many people don't get the simple things.
My only comment on this particular video is that for exterior work a touch of dielectric grease pushed into the crimp before assembly by hand (just a bit, not like caulking a joint) will serve you much better than solder. Solder actually seems to cut the useful life of my crimps for exterior applications. No idea why. DE grease is great stuff to learn to use generally.
Try it. You will be surprised.
Dielectric. Not conductive.
It is used extensively to prevent what electricians call corrosion. We would call it oxidation. Either way, it greatly helps prevent increase in resistance at an electrical junction due to the effects of weather.
I am not thinking of making a better junction. I am thinking of making an electrically stable junction.
As to the solder joint failures, I am only guessing. I have emailed back and forth with a variety of crimp manufactures trying to get a document to use with an E inspector who would not allow solder in crimp joints.
Bottom line - every company supported the inspector. They strongly condemn soldering crimped joints. They all seem to have different reasons. Mostly focusing on what tests they did to get their product UL/CSA approved. Because solder played no role in their approval, they will not recommend its use.
Note: They make a distinction between use of tinned wire, wherein each individual strand is tinned, and amateur tinning of a twisted wad of strands.
In my hands, the solder seemed to prevent water from flowing through the junction. Rather, water would sit almost permanently in the small cracks in the joint. After a while, something breaks.
I do know that MIL Spec does not allow soldering exterior crimp junctions unless the "termination has been listed for use in solder applications." I think that says it all as far as code thinking people/engineers see things.
Use the termination (crimp) as it was listed. Anderson crimps are not listed for use as solder junctions. Look them up in the UL White Book. Use the DVD. The hard copy is impossible to navigate.
I hope I am making sense here. Too many words.
@@crocellian2972 You make excellent sense.
I will use the dielectric grease for a charging point in the grill of my car. I was concerned about corrosion.
Now I have the answer.
Thanks for the information.
The man the myth the legend keep it up thank you
That was a very helpful video! You obviously know your stuff and explain everything thoroughly. Thank you!
Great video. Easy to understand. Was able to crank out a couple cables tonight.
thank for your precise explanation .
Great video. I have found that using a small flathead screwdriver to push the connectors in the housing is necessary to get that final click. You want the cupped section to be as far forward as possible and hook around the metal tab.
Thank you. Excellent demo and helped me out a lot.
Excellent video. Clear and concise and well executed. Thank you.
This was a excellent demonstration. I used this video as a tutorial for my first powerpole installation. Thanks,
I'm sold. I wasn't aware of this type of connectors.
Thank you for vid. Made job much easier!
That was very comprehensive - many thanks.
Thanks, a good tutorial for me as a first time, one time user, of this type of connector.
Good to know about the orientation of red and black plugs. KB8AMZ
Great information in your video, thanks so much! You also did a great job in filming it, it flowed nicely and was easy to watch. Thanks!
Soldering these definitely causes metal fatigue where the solder ends. I work with these a lot on autoscrubber battery connections. Past repair people have soldered them and after enough plugging and unplugging, the joint gets weak and eventually just falls off. Great video!
There is a saying to remember the proper orientation. When looking at the plug as if you are going to plug it into your eye, it’s red right, tongue top. I use these in my car. 30 auto breaker connected with 10 awg wire. I have a connector at the front grill and one on the passenger side floor. Works great for connecting inverters, battery chargers, etc. after the cigarette lighter end melted on my 12v tire pump, I cut it off and installed power poles on that as well, doesn’t even get warm. I even cut the house plugs off of a 12 awg extension cord and put Anderson plugs on that so I can stretch the tire pump back to the trailer. These things are great.