@@jareknowak8712 Fun fact: Rolls Royce actually HAS made a diesel rotary engine in the past. It not only had a rotor for compression like all other rotaries, it also had an even larger one in the same engine block to act as a compressor (just like a turbocharger or supercharger). It ended up being one of the most efficient engines ever for its size, but as it was designed for military purposes and they needed it to work slightly more often than a rainstorm in the Gobi, it was scrapped.
@@davekessing2266i think he means they put the shell of a 3 over a whole new chasis; i dont think many actual proper drivetrain swaps have ever been done to these
Imagine being this naive, these tuned rotary motors probably last 1 season if theyre lucky kid youd have to get an engine swap every 6 months. Have to get it warmed up and tune it for 20 minutes before driving, cant fill up on pump gas, wont meet emissions ect
Wow, obviously an unserious comment. I love the car, not demanding it be made for everyone. As a Mazda technician and previous owner of a couple Mazda Vehicles I do not believe that this set up in anyway shape or form would be practical at all. Though a Rotary can be made to be fairly reliable, in this application it’s obviously made for one purpose. Relax.
I read your comment as "mazdaspeed 3 and 6 should come from the factory as rear wheel drive turbo rotary" NOT time attack setup, scratching-the-pavement-low, backfire blowing out windows and shit. Come on, you silly internet fuckers. I agree that MS3 would be awesome RWD! Its a fun car to drive! But, with less torque steer and more oversteer, imagine how shitty-sideways you could get them groceries home! 😃
Yall fellows do know its a special body that LOOKS like a Mazda 3 hatch... This car is actually an awesome custom wankel-powered tube-frame car (like a Nascar racecar) that wears this emaculate detachable body to make it look more interesting, more modern, &/or more relatable.
Thats ignition cut for flat shifting, not anti lag. The strategy being the driver can keep on the gas while pulling the next gear and not lose momentum and the turbo's remain spooled. Rotary engines flow so much air you dont really need an anti-lag strategy, every rotation is a power stroke so its flowing a lot of exhaust gas through to the turbo, and this being a 2 rotor twin turbo its likely a 1 rotor to 1 turbo setup.
So glad to see this car coming back in action.Started to wonder how come it didn't race but now i can't wait to see it in this 2020. season.Looking forward for your video.
its a twin turbod 13b. Mild porting and the two turbos will definitely alter and smoothen out the exhaust pulses/sound. Of course it wouldn't sound anything like a naturally aspirated peripheral ported rotary
If you don´t know, google it and confirm for yourself. It´s not like this is a barely known project. Pretty high profile on the Hillclimb Racing World and its building process was shown at the time in a quite detailed manner.
For those wondering: It's rear wheel drive.
Lol XD
THANK YOU I was wondering the whole time
Yes, but it is a diesel❓
😉
@@jareknowak8712 Fun fact: Rolls Royce actually HAS made a diesel rotary engine in the past. It not only had a rotor for compression like all other rotaries, it also had an even larger one in the same engine block to act as a compressor (just like a turbocharger or supercharger). It ended up being one of the most efficient engines ever for its size, but as it was designed for military purposes and they needed it to work slightly more often than a rainstorm in the Gobi, it was scrapped.
I wondering if some make 4 litre rotary engine:)
Those downshifts at 2:56 are absolutely insane. Goosebumps
I hear shots😂
those downshifts are juts like 3 consecutive gunshots.
Thats Music to my ears
Yes 🙌🏼
Yes, I’ll take 3
Rotors? 😉
Mazda bass drop at 0:50 ❤️ 🔊
Will See 😂😂😂😂😂
😂
I love Mazdaspeed’s, rotary and a rear wheel drive conversion. This thing is crazyyy.
Fivall
There was never a drivetrain conversion..if you get these hints:
(Nascar, DTM, NHRA-Pro stock, JGTC GT500 cars, Australian supercars)
@@MainMite06just look up the production specs of a Mazda 3 mps ,and yes production are FWD ,so yes theres a drivertrain swap.
@@davekessing2266i think he means they put the shell of a 3 over a whole new chasis; i dont think many actual proper drivetrain swaps have ever been done to these
OK, the engine sound sent onboard HD resolution back to dark ages 😂
was thinking that same that how can you get that quality 2020...
Cool vibrations! 😉
@@ruokanen4163 the onboard clip clearly says 2014 in the bottom corner which was around when this car first debuted
2005 Nokia cameraphone.. haha
How the Mazda 3 MPS should have come from the factory - rotary powered! Cant wait to see this beast out again its one of the best swaps iv seen.
We´ll feature it again this year for sure. Now sporting new colours and more Aero ;)
I disagreed,stock one/tuned is cooler..
Holy speed and rotaries....
Man that thing sounds incredible. A swarm of pissed off Japanese Hornets.
Hate Japanese hornets🙄
0:22 it sounds like a sheep 😂 I love the car, but it's just something I can't miss hahahah
Jeez it fucking does as well 😂😂
beeeehhh :P
I wish a 1930s race car driver could see this, I wonder what there reaction would be.
The front of the car seems to be smiling even more.
Without a doubt the coolest engine conversion for any car. Great job!
I feel that this is how the Mazdaspeed3 and 6 should have come from the factory.
Imagine being this naive, these tuned rotary motors probably last 1 season if theyre lucky kid youd have to get an engine swap every 6 months. Have to get it warmed up and tune it for 20 minutes before driving, cant fill up on pump gas, wont meet emissions ect
Wow, obviously an unserious comment. I love the car, not demanding it be made for everyone. As a Mazda technician and previous owner of a couple Mazda Vehicles I do not believe that this set up in anyway shape or form would be practical at all. Though a Rotary can be made to be fairly reliable, in this application it’s obviously made for one purpose. Relax.
I read your comment as "mazdaspeed 3 and 6 should come from the factory as rear wheel drive turbo rotary" NOT time attack setup, scratching-the-pavement-low, backfire blowing out windows and shit.
Come on, you silly internet fuckers.
I agree that MS3 would be awesome RWD! Its a fun car to drive! But, with less torque steer and more oversteer, imagine how shitty-sideways you could get them groceries home! 😃
This thing is mad.
Engineers are amazing they keep creating trophy cars with crazy mix and match parts 👍
0:16 Best part.
Suddenly I like Mazda 3's. Amazing how flat it stays, this beast grips and rips!!
Dud you are my super hero... a rotor in a Mazda..how unusual...
Big fan of the rotary...in anything..hey even in an NSU....
Omg, mental car for a mental driver! This rotary sounds like a beast.
I never thought a mazda 3 could sound like this
Yall fellows do know its a special body that LOOKS like a Mazda 3 hatch...
This car is actually an awesome custom wankel-powered tube-frame car (like a Nascar racecar) that wears this emaculate detachable body to make it look more interesting, more modern, &/or more relatable.
That car is mental. Love it!
This has to be the best tune done for anti Lag Ever....every gear change down and back fire u can hear the turbo wind up and keep high boost
Thats ignition cut for flat shifting, not anti lag. The strategy being the driver can keep on the gas while pulling the next gear and not lose momentum and the turbo's remain spooled. Rotary engines flow so much air you dont really need an anti-lag strategy, every rotation is a power stroke so its flowing a lot of exhaust gas through to the turbo, and this being a 2 rotor twin turbo its likely a 1 rotor to 1 turbo setup.
Mazda with 630hp drives:
Afghanistan veterans: *having flashbacks*😥😥😥
How in the world is it that low and not have a bumpy ride? Barely has any body pitch and roll, and minimal scraping also.
That is one violent Mazdaspeed. Dayum.
Such a good way to start the week
So glad to see this car coming back in action.Started to wonder how come it didn't race but now i can't wait to see it in this 2020. season.Looking forward for your video.
amazing footage to wake up to on a Monday morning
This thing is Crazy 💪
The king of engine
I like this a lot...one of the bests mazda's I've seen so far.
エンジンルーム内を見たいですね。
ロータリーターボでFFだなんて、どんなレイアウトにされているんでしょうね。
Super cool, im curious why they rev so low tho, i mean 7500rpm its pretty low for a rotary even a turbo one atleast when its souped up.
This is a great platform if done right, like this one!
I would be happy too like that Mazda if I have a rotary that sounds like that lol.
This should have been the direction of the rx8 if they were trying to make a practical rotary powered car.
Would never expect it to see so much hp comin from a 13b
the 13b is for mazda what the b18 is for honda :P little engine that can hehe
I just got my first car mazda 3 hatchback yesterday all stocks 😳 then im watching this 🤤 i want that
God I wish my MS3 was that sick
What a car...awesome
Damn... that was amazing to listen to.
Anyone know a build video or some sort of online page. This is amazing.
Thats sick
Mazda needs to bring back the speed3 in rear wheel drive too
I'll have 3 of each please...
Good stuff dude
Awesome sound
Fantastic on board as well
Love it
Thanks for sharing
😊
Our Pleasure Syd ;)
The engine sound bass boosted made the whole video better
Like a hoard of angry bees. Sounds amazing.
That thing is soo sick!
Sounds really good on one of the best European hill climb racing.
Falperra 🇵🇹🇵🇹🇵🇹
Lovely sounds from the inside...
i love Mazda
Damn I wish my 3 sounded this good. It sounds great with its catback but it’ll never sound this good
When did guns get blow off valves? 🔥
I’m just speechless
Sounds amazing!!
Certain clips it seems like he’s taking it easy, still a sick car though
I'd take it pretty easy in that monster
Now thats a real devil swap
Was it AWD in this video or RWD? Cheers. Totally epic!
I looove sound engine rotary!! 😨😍Monster Sound Mazda !! 😈 Monster Anti-Lag !! Monster Rotary!!
WOW !! awesome.
God the Speed3s should’ve been a rotary. I wish mine was
I wanna go fast
I love this car
RX7 is still the beast !!
Beautiful sound . nicely done
That thing is savage
WTF with the people who dislikes this!?
Junge knallt das Teil 😳
Mazda MPS shotgun...💪💪
Me: *Seeing this monster*
Also me: *my new dream*
What aro Is he running? Looks clean as hell
This is it. Boys, I think I have found the peak of humanity
Super like 😀👍
That noise like a Swarm of pissed of killer 🐝s! Love it and if you know you know.
What a weird rotary... Sounds like a 4cyl with a turbo and antilag, and revs only to 7.5k...
I dont know...
its a twin turbod 13b. Mild porting and the two turbos will definitely alter and smoothen out the exhaust pulses/sound. Of course it wouldn't sound anything like a naturally aspirated peripheral ported rotary
If you don´t know, google it and confirm for yourself. It´s not like this is a barely known project. Pretty high profile on the Hillclimb Racing World and its building process was shown at the time in a quite detailed manner.
Yeah, you two are right.
What if use Mid rpm Turbo?No need 9K rpm now..
And custom titanium exhaust pipes?
@@joe125ful yeah, still weird for a rotary tho
Love it, great car amazing sound 👍👍👍👍👍🏁
I want one...
ZOOM ZOOM ... bang crackle pop :)
This is beyond amazing, buuuut the first gen platform is beyond better
The in-board camera is cursed
what an evil car 😱
Thunder
Doesn't look like 600+ BHP
glad im not the only one who thought this
And it sounds weird for a rotary... It doesnt rev too much. It's like a i4
@@suprvrmedia6235 It depend what turbo kit is used right+titanium custom exhaust pipes?
@@joe125ful I think so, but It's still weird to see a rotary with a 7.5k redline.
It sounds like a Sr20 beefed up with titanium exaust jajaja
@@suprvrmedia6235 See?No need hear typical boring Zzzzzzztttt..you can hear very different sound.
It's glorious 😭 I'm gonna do this with my ms3 😂
good luck bro, you'll need it
what more could you want!
More development was the only thing needed by this machine. Hopefully it´ll get it now.
👌
What shop did this engine build?!?
is it rwd or fwd
looks like it's rwd, saw some wheel spin near the beginning.
why on earth would they keep it fwd
It is Rear Wheel Drive ;)
WAO!
Does it have brake lights? Or does it just have so much aero that it doesn't need to brake for corners.
Who stuck a cannon in the car's exhaust ?
Your mother
@@electronbeing5473 oh a little child who thinks he's funny.
Congratulations
0:14
omg
Bang bang skeet skeet nigga
Dude like honestly I replayed 3 times it sounds like cannon fire my god
I love this carro
sound wow
Is a red conversion possible with the original motor and transmission?
Can we get lap times please?
Here my question
Turbocharger is on -5 or +5?
Ride Weight is on -5?