I have a project I would like to do building a big truck with tesla drive train but it seems like such a daunting challenge since I am an electronics novice.
Thanks for another amazing insights video. Wondering if you intend to use the Tesla motor on the Prius chassis? Any particular torque ratio considerations or frame modifications?
I actually quite like the look of a new Prius so I was considering to use Prius gen3 and modify it to look like a new one. But they hold the price quite well so more expensive than other models I am considering
@@LatutaEV I love the prius box too, particularly like the prius 2 (I have a 2008 version). Though I also have a tesla x, I would love to see the hybrid converted electric - without expending an arm and leg for it though.
@@statzietech it was Jlc PCB I have found their software often not interpret the rotation of the components. I actually check but I am guessing not well 😞
No this is an open inverter board I made myself. It's based on Damien Maguire's design. It replaced the Tesla processor board to control the rest of the inverter. If you watch my Prius inverter and gearbox series you will see a variant of that board used as well.
WARNING! When connecting DC power supplies like that in Series, be careful and make SURE that the (-) output connection is not connected to the frame/housing of the power supply. If it is, and you "stack" them as shown, you will be shorting the outputs to ground... from the mechanical connection of stacking them.
@@LatutaEV I probably should have been more specific... and this wasn't really aimed at you, but at viewers. It's relatively common that some manufacturers internally connect the "-" DC output to the metal/mechanical enclosure of the power supply.
@@LatutaEV I appreciate the answer, and it is really nitpicky, so sorry for that, but the exact words I was referring to was: "I couldn't help but admire incredible level of technology Tesla had even in 2013 when this car was built." I reacted to it because the Ebay page showed motor from a 2017 Model X. Again, I wasn't trying to be trolly or a negative commenter, I simply wanted to add a correction in case someone else was confused by the statement. I really liked the video by the way, super informative and clear, so thank you for putting it out there! Have a great day!
@@herrjonna2007 Yes it was a bit nitpicky but I am not a big channel and not running UA-cam as a way to make money but a hobby really. So I welcome any comments. Thank you for your attention and for liking the video 😀. But to be pedantic the eBay title was: "Tesla Model X S 217 AWD Front Engine Drivetrain..." I guess the seller was trying to squeeze as many key words in the title as possible. He even called it an engine 😂. Sorry I AM not responsible for that one either 😭
Truly amazing video! Great ingenuity and craftsmanship!
Thank you so much for your kind words. This will keep me going 😁
well done sir..... very well done!
Thank you very much 😊
Aw shit yeah boiii, got dat telsa drive train.
May Damien M and the openinverter legends grant you simple control of it
Oh yeah baby ⚡⚡⚡⚡
Are you planning on using this in the RX8?
Great you have the motor spinning.
Thanks
I've got a couple applications this would definitely work good in
What do you have in mind?
@@LatutaEV I got an old datsun pickup truck that needs a new drivetrain
I was wondering where the actual inverter is. You can see it for a split-second at 9:49. The hole for molex connector is visible there too.
The inverter is under the processor board if you watch my other video on the Tesla motor play list you will find one
I have a project I would like to do building a big truck with tesla drive train but it seems like such a daunting challenge since I am an electronics novice.
You can purchase ready made controllers to control Tesla motor. If you are in the US there are a number of companies selling this type of products.
awesome)
@@andreyl2705 thank you
Thanks for another amazing insights video. Wondering if you intend to use the Tesla motor on the Prius chassis? Any particular torque ratio considerations or frame modifications?
I am not considering Prius at this stage. I have not started thinking about those things until I sort out batteries
I actually quite like the look of a new Prius so I was considering to use Prius gen3 and modify it to look like a new one. But they hold the price quite well so more expensive than other models I am considering
@@LatutaEV I love the prius box too, particularly like the prius 2 (I have a 2008 version). Though I also have a tesla x, I would love to see the hybrid converted electric - without expending an arm and leg for it though.
I too would like to convert a gen 2 Prius to all EV. Maybe with an obnoxious amount of HP, like an electric muscle car? Any recommendations welcome?
Can a 60v 5amp power supply be used for the initial test HV first run or does the amperage need to be higher?
@@statzietech it was Jlc PCB I have found their software often not interpret the rotation of the components. I actually check but I am guessing not well 😞
... how exactly did this Inverter board even work? was it an aftermarket repaired unit? 🤔
No this is an open inverter board I made myself. It's based on Damien Maguire's design. It replaced the Tesla processor board to control the rest of the inverter. If you watch my Prius inverter and gearbox series you will see a variant of that board used as well.
@@LatutaEV ... oic, thanks for the reply. I thought that the board was manufactured by Tesla 🤔
@@Texaca the Tesla board was replaced
WARNING! When connecting DC power supplies like that in Series, be careful and make SURE that the (-) output connection is not connected to the frame/housing of the power supply. If it is, and you "stack" them as shown, you will be shorting the outputs to ground... from the mechanical connection of stacking them.
Thanks for your advice the outputs are isolated to ensure that they don't touch the chassis of psu
@@LatutaEV I probably should have been more specific... and this wasn't really aimed at you, but at viewers. It's relatively common that some manufacturers internally connect the "-" DC output to the metal/mechanical enclosure of the power supply.
@@beforebefore yes I see what you mean but not on those lambda power supplies they are great
3:08, Model X was not released until 2016
I don't think I have ever said Model X. This motor is actually from the model S. My exact words we ...."technology Tesla had in 2016..."
@@LatutaEV I appreciate the answer, and it is really nitpicky, so sorry for that, but the exact words I was referring to was:
"I couldn't help but admire incredible level of technology Tesla had even in 2013 when this car was built." I reacted to it because the Ebay page showed motor from a 2017 Model X.
Again, I wasn't trying to be trolly or a negative commenter, I simply wanted to add a correction in case someone else was confused by the statement.
I really liked the video by the way, super informative and clear, so thank you for putting it out there!
Have a great day!
@@herrjonna2007 Yes it was a bit nitpicky but I am not a big channel and not running UA-cam as a way to make money but a hobby really. So I welcome any comments. Thank you for your attention and for liking the video 😀. But to be pedantic the eBay title was: "Tesla Model X S 217 AWD Front Engine Drivetrain..." I guess the seller was trying to squeeze as many key words in the title as possible. He even called it an engine 😂. Sorry I AM not responsible for that one either 😭
@@LatutaEV Hehe no I understand, Ebay sellers be Ebay sellers 😂
@@herrjonna2007 true
does this mean I need to cancel your GS450h Mafia T shirt order ?
Yes unfortunately you have to, I am really sorry Elon got me to the dark side 😭. However you can still keep the Zombie T shirt on order for me lol 😂
How much did it cost to build the controller yourself?
A bit short of £200 if you exclude time spent testing and purchasing discovery board I used for testing
That's for two boards of course 😁
Can you make one for me
Sorry I can't at the moment. You can purchase one from Johannes Hubner he is the developer of the open inverter
ua-cam.com/video/D02tjnu4VOY/v-deo.htmlsi=V72HyZOYZqepD1SP