Mine constantly turned on and ran when I shut the door but table didn't turn and light didn't come on. I ohmed out all the switches ,everything checked out good. Watched dozens of vids on what could be wrong, then came across your video. All I can say is "I can't believe it!" Pulling the ribbon cable out and resetting it actually fixed it! I would have never thought. I was about to give up and buy a new one. Thanks for taking the time to make a vid and show what to do.
Hello, sir! Thanks for this video. In my case, it seems there is a short circuit elsewhere. Now I’m thinking of disassembling the entire keypad unit. I’m wondering if the other end of that ribbon could be shorting.
Nice tutorial! I have a slightly different model that looks the same in appearance, but it worked all the same! Currently working fine now (fingers crossed)
Damn didn’t work for me. Same buttons are still out, but it was worth a try. I ordered a replacement control panel from Amazon. A new one was $180, I bought a used one was $60 (can mail back if it doesn’t work).
You could try but it might be tough to do it. Never tried because it's really not that hard to remove them. Let me know if you were able to if you try. Thanks.
I have the same exact model and having the same problem. I didn't disconnect all the connections I was able to reach the ribbon without unplugging all of them. It worked for one use perfectly and then it started doing it again. Any ideas, I wiped the ribbon with a paper towel. Is there any kind of solvent I should clean the ribbon with? Should I have unplugged all connections? Thank you
Mine constantly turned on and ran when I shut the door but table didn't turn and light didn't come on. I ohmed out all the switches ,everything checked out good. Watched dozens of vids on what could be wrong, then came across your video. All I can say is "I can't believe it!" Pulling the ribbon cable out and resetting it actually fixed it! I would have never thought. I was about to give up and buy a new one. Thanks for taking the time to make a vid and show what to do.
I am so glad it worked for you as well.
This worked like a charm for me! I almost bought a new microwave in a rage- I’m so glad I tried this first. Super quick and easy fix!
Glad it helped!
Thank you so much for this! He beeping woke me up this morning and thanks to this video I was able to fix the problem! 🎉
So glad it worked for you.
This worked 100%. Took the ribbon out, wiped it off, put it back in and presto, it worked. I’m very thankful for your video, God bless you!
Your very welcome
Oh man you’re a life saver. This is my exact model in my apartment. Couldn’t get the beeping to stop! Thank you for sharing
Your very welcome please like and subscribe 😊
Hello, sir! Thanks for this video. In my case, it seems there is a short circuit elsewhere. Now I’m thinking of disassembling the entire keypad unit. I’m wondering if the other end of that ribbon could be shorting.
Nice tutorial! I have a slightly different model that looks the same in appearance, but it worked all the same! Currently working fine now (fingers crossed)
Your welcome hope it stays working.
Thank you for sharing 🙌🏼 my microwave it’s working!!!
Your welcome I hope more see this video.
Unreal thank you for this video!!
Your welcome please like and subscribe!!!
Very nice tutorial. Keep up the good work.
Thanks Paul hope it helps.
Damn didn’t work for me. Same buttons are still out, but it was worth a try. I ordered a replacement control panel from Amazon. A new one was $180, I bought a used one was $60 (can mail back if it doesn’t work).
thank you
@@michaeles206 your so welcome
Thank you, well done
Thanks it has seemed to help many.
Thank you! You saved me $360
Your very welcome like and subscribe 😀
Do you absolutely need to remove the blue/red/white attachments, or could you just try reseating the ribbon?
You could try but it might be tough to do it. Never tried because it's really not that hard to remove them. Let me know if you were able to if you try. Thanks.
Worked for me😊!
Great
I have the same exact model and having the same problem. I didn't disconnect all the connections I was able to reach the ribbon without unplugging all of them. It worked for one use perfectly and then it started doing it again. Any ideas, I wiped the ribbon with a paper towel. Is there any kind of solvent I should clean the ribbon with? Should I have unplugged all connections? Thank you
It doesn't always fix the problem forever I ha e heard that sometimes it comes back. You could spray with some electrical cleaner and try again.