I just purchased a 2022 grom. I'm online this morning Buying a rear Fender delete get for $70 of course They'll offer you a tail light and relay for for upwards of $225. Before I checked out of the shopping cart I wanted to make sure I was getting the best deal I could that's when I ran into your video....... wow good job! you brought me down-to-earth thank you.
If u have a home depot, vice, drill and some metal bits all you need to buy is 1" black strapping and some small nuts and bolts. You can also buy small leds from a autopart store for the tag light. Bend it up and drill your holes paimt it black with epoxy paint and it looks great plus it will hold up for the life of the bike. Ive owned 5 bikes in the past 20 yrs and have done this for all except my first. $200 for a tag holder is outrageous.
If you spray it with black spray on bed liner, the wood grain won’t show and you won’t be able to tell it’s wood. Also, paint those shiny screws. Good job on this project!
Ebays 29.00 integrated tail light for grom works great, don't need the signal flasher either. But cool idea , only thing is go little further and put wood lacquer on it some show the wood grain. Lowes sells 16gauge steel piece for 10.00 you can bend over a table corner and them paint and looks pro. Tst sells 10.00 led plate light that is like mini spot light. On ebays grom integrated lights, all years are good. Tst sells fender eliminater kit for 30.00. Do an exhaust next,lol
Wow this is awesome!!! Good stuff! Such a great video as well even tho you got me in the beginning when you said that where will wrap it up for this video😂😂 I was screaming haha
Worked out pretty well I'd say, wood can be very strong, get some glue in the screws and all the joints, you could even use small angle brackets on the insides to make it even stronger. The key to strong wood construction is glue. Pretty cool I bet you have under $10 bones invested.
That came out good. The only thing different that I would do would be to trim down the face board so that it is just slightly smaller than the license plate.
TST makes the best budget kit @ $34.... my fender eliminator search had a special criteria and that was it had to be compatible with the addition of a subcage later down the road. A lot of kits aren’t compatible with a cage but the TST basic fender kit looks like it will work.
Talked to ya not too long ago when I was wanting to get a Grom...well today made the big purchase and got the Grom abs model. Now time to fix the mirrors and for sure do this. Then subcage
Attention Deficit right on, so far the bars aren't that bad so I'll have to play around with some others. But for the fender eliminator. I was thinking. Get a small sheet of aluminum. Still make the box like your wooden one. But then make a 3/4" lip on the bolt sides so you can bolt on the bottom
I know your new to youtube man but you've steppped it up big time. I really enjoy your videos great quality on video and sound and your so detailed keep it up bro you'll be a 50k subs soon hahaha
I found you on Insta too lol seriously my favorite channel now and that's saying a lot. I'm buying a grom real real soon also looking for a pit bike as well.
AJ Moore I'm glad to have you here on the channel! How did you find my video by the way? And nice man you will have a blast on either, make sure to send me some pics of whatever you get!
Well so I've had 4.5k set aside for quite some time. I was gonna buy a brand new grom. But I really wanted a pit bike and a dirt bike. I've now found me a grom for 2k I'm picking it up in a week. I'm gonna try and find a pit bike and a dirt bike too. I waited until now bc weather is cold lowers the price and people getting tax return and should be selling older toys. LOL I'm watching you race your dog now haha. And I found your channel I was on grom videos and I was watching fooligan I always scroll down and look for less sub channels bc they usually don't get enough respect and I came across your video of buying 4 grom. Since then all my free time I just go through your channel lol. Love all the snow wished we could get some here in TN we just get cold.... shewww sorry for blabbing so much. Have a blessed day bro.
+AJ Moore That's true on the cold lowering the price.. Just picked up something a couple of days ago should be a video up soon✔ Thank you for the support! Have a blessed day yourself👊
I Like the creativity but - the TST fender eliminator looks great for the Grom: it took around 3 days to receive and another hour to install w/ smoked light that eliminates those “shrek ear turn signals.” Smoked integrated taillight Fuse relay Eliminator Kit And relay wires $153 roughly Supper cheap !
Hey bro my name is Thagner, I live in Brazil and I have the dream of having an honda grom. At the moment it is not sold here, and I learned that the nearest country where it is sold is in Paraguay. I won't give up on that, and I'm even trying to contact Honda to make her purchase possible. I really liked the finder eliminator you made. I have no practice at all, but I will ask someone to do it for me as soon as I get the bike. I am already subscribed to your channel and will follow! Keep enjoying the bike and registering! Hugs...
Have a few bikes but decided to pick up a Grom to mess around on. Found the video and heard you mention Ohio. I’m up near Youngstown. Small world man. Creative solution for the tag, far lighter than stock.
There is a lack of fender eliminator for the CRF230M/L's and non of them really got my attention. I tried salvaging a scooter license plate bracket and a water pump bracket and those failed miserably. Then one day I find a satellite dish, took it apart, used those brackets and painted it black to match. It's slightly crooked, yet very solid. You can see it in some of my videos. It's been on there now 2 years, compared to the other junk parts I used.
That is awesome! I'm glad you figured something out, my girlfriend wants a supermoto now and we talked about getting her a 230, how do you like it so far?
So I have 4 bikes. XR250, CR125, CRF230M and just last Friday, a Grom! So now that I have a comparison that we can relate to, I rode around on the Grom putting 100 miles on it(all stock). With the FMF setup and 14/38 sprocket, the power became very noticeable compared to the Grom. I have taken the interstate once with it, still wouldn't recommend taking the interstate like one shouldn't with the Grom. I think it is great for around town and paved farm/county roads. Aftermarket parts are somewhat of a challenge, even with that said, I feel like this is a good bike, I got it 4 years ago and just reached 17K miles.
Wood really lol hey if it works that's why I love your Channel I did something similar to what you did at first I use the license plate bracket off the original fender bent the top a little drill holes to line up with the factory holes in the bike and installed I used it integrated turn signal and then bought a license plate light that goes and where one of the bolts would to hold the license plate on I send you a pic but I don't know how on here
Honestly as I been looking threw ur channel u have done a lot already I got a lot of work ahead lol I’ll let u know if I get stuck or need anything specific thanks again
How did you fix it to the bike? I may have missed it. Lol but I’m with you on the eliminator kit too expensive for what it is. I’m going to try this! Thanks!
You will have to watch the video😂 I just used a couple washers and screwed it from the top into the wood. If I were to do this again I would use a black plastic cutting board like a quarter inch thick or less. Would pretty much last forever. I'm glad I'm not the only one who doesn't like spending money haha. Thanks for watching!
Attention Deficit thanks! Yes, I’ll spend money on actual mods! I appreciate your videos just picked 2 2018 models up within 2 months because they’re just so fun!
Looks great Bro!!! Good job. I have almost Zero fabrication skill. I went to TST and got their kit. $169.95. Then I ordered 2 led turnsignals at $30 a pair. Ouch. Wish I would have seen this before I did that. Oh well........ Your KLX110 bars are next. Loved that video. Thanks for this video
Hey I bet you could wing it! TST was who I was originally going to go with but I'd rather spend that money towards something else. You pop a wheelie yet?? Thanks again for all the support and for being a part of the channel!
Eric Andrikowich it will work with stock tail light. You will need aftermarket LED turn signals. I just got the whole fender eliminater kit. Went together super easy.
'Welcome to Ohio, buddy'. Truer words have never been spoken. Just the other day i posted on facebook... Mother Nature; You can't have all 4 seasons in 1 week. Ohio;...Hold my beer.
@9:07 in the video I watching and hoping you go with a nice cherry stain @9:15 you ruined my dreams🤣Where about in Ohio? I'm up near Cedar Point. Just picked up a Grom and want to fab a bunch of my mods myself. Well done thank you for your time.
Appreciate you responding. I have not rode a lot in my life but all the sources on google are saying it is safer. Even a life saver. I’m not sure. I’m buying one soon idkk what I’m going to get!
+Deric Watson Hmm if you plan on financing you might as well just pay a little bit extra for the SF. But if you are paying cash for a brand new one at the dealer you will get screwed with tax and fees so I'm not sure on that one..
Gotcha, thx man, I’ll find out the details from them. I grew up riding dirt bikes, 4 wheelers etc and sold me street bike when I got married. With 3 kids depending on me, I think the Grom may scratch the riding itch just messing around the neighborhood and town with a little less risk than getting another big bike. Your videos are really good...and don’t have a bunch of trash language so my 11 yr old son can watch with me!!
If you're going to do something like that, you should at least spray over it with something like truck bed liner that way it doesn't have a wood appearance at all and it's more weather resistant.
It's mounted using 4 screws with washers, coming through the top of the 4 holes left under the seat screwed directly into the wood. I hope that helped and good luck with the project!
Really nice. If youre doing it again sometime, consider using a thick black nylon cuttingboard instead of wood - they are only like 10$, easier to work with and you can modify without having to repaint. Can even get a pretty decent finish on them with abit of work
Yooo do you remember by any chance when you took your motorcycle permit how many questions and tests it was and what some of the questions were going Tuesday trying to get the grom and go to bike week in wildwood nj next week
Lol did you say wanker ??? Didn’t think you guys used that cuss though it was mainly over here in the uk . At first I thought you was crazy using wood but for a low cost upgrade at home it worked great
smugBBQ I'm glad you caught that😂 I use it more as a joke than anything, I wish more people used that word over here haha. And thank you I'm pretty happy with it for not costing me a dime!
A+ for ingenuity but really come on... wood?? this bike has been out for like a hundred years you mean to tell me nobody has a simple fender eliminator kit that is worth a damn??
please do not make your subcage out of wood don't know if I would have went with wood only because when it gets wet things do happen to Wood I guess it was pretty creative I want with a hot bodies Fender Eliminator kit and made my own bracket so my plate tucks under and flips back so you can't see my plate and when I want you to see it I flip it forwards
You’re forgetting to take into account how much machinery for making a “piece of bent” metal costs. Or the amount of research you need to do to get it done and looking nice it. And to texture and color match. You get what you pay for. Lol probably why this looks like shit up close. A lot better than the fender tho
Wood,,,, ah hell NO! Your garage is FULL of metal stuff. Wood is a poor vibration manager. Bikes are made of metal because of how steel/aluminium handles vibration One piece of 3/16th's steel or Aluminium. Cut into a "T" with each side about 6 inches by 4 inches. Bend the vertical midway to 30 degrees. Bend each side 1.5 inches in. Find your OEM fender screws and remount the "NEW" plate holder. Drill for OEM plate light mount and holes on each side for OEM blinker lights. Connect electricals, and plate. GET OUT OF YOUR GARAGE and RIDE. Hopefully this wood obsession will disappear with the ride thrills. Your welcome.
I just purchased a 2022 grom. I'm online this morning Buying a rear Fender delete get for $70 of course They'll offer you a tail light and relay for for upwards of $225. Before I checked out of the shopping cart I wanted to make sure I was getting the best deal I could that's when I ran into your video....... wow good job! you brought me down-to-earth thank you.
Damn dude I was thinking 🤔 no way at first. But after seeing the final result I’m really impressed. Great job 👍🏻
Thanks man! you can't beat free haha, it'll do for now.
I was thinking the same thing, no he didnt use wood. But did turn out not to bad.
It's only temporary, thanks for watching!
If u have a home depot, vice, drill and some metal bits all you need to buy is 1" black strapping and some small nuts and bolts. You can also buy small leds from a autopart store for the tag light. Bend it up and drill your holes paimt it black with epoxy paint and it looks great plus it will hold up for the life of the bike. Ive owned 5 bikes in the past 20 yrs and have done this for all except my first. $200 for a tag holder is outrageous.
I'd love to do a metal one in the future. Thanks for watching I hope you stick around!
I am watching from the UK .Bought my husband a Grom . Your videos are informative and enjoyable. We love all your videos. Keep up the good work.
That's awesome thank you for sharing!! I appreciate the support and hope you stick around here on the channel😁
nice job.
ps: pls dont ever think of making wooden Rims okay.
Aliana khamitova Now that's an idea😂😂
If you spray it with black spray on bed liner, the wood grain won’t show and you won’t be able to tell it’s wood. Also, paint those shiny screws. Good job on this project!
People pay for wood grain😂 Thanks I appreciate it!
Came out way cleaner than I thought it would, looks great dude. Awesome vid.
Thank you John! Glad you enjoyed it👍🏻
Did you keep a template to make this for all our groms? Love, Mom
Katie Nicholson Dad gave me too much crap for using wood haha😂 Love you guys and thanks for watching!
Ebays 29.00 integrated tail light for grom works great, don't need the signal flasher either. But cool idea , only thing is go little further and put wood lacquer on it some show the wood grain. Lowes sells 16gauge steel piece for 10.00 you can bend over a table corner and them paint and looks pro. Tst sells 10.00 led plate light that is like mini spot light. On ebays grom integrated lights, all years are good. Tst sells fender eliminater kit for 30.00. Do an exhaust next,lol
Wow this is awesome!!! Good stuff! Such a great video as well even tho you got me in the beginning when you said that where will wrap it up for this video😂😂 I was screaming haha
Careless Chip Thanks again Chip! And lol I wouldn't do that to ya😂
Amazing, although I'm trying to see where you mounted it to the bike ! Looks great
Lools great. If i get a Grom, i am definitely doing that mod myself
Here in L.A. there are very few days the weather affects riding. Oh... that's lower Alabama! Sweet
I thought it was going to look like crap but when you painted it it looked really good
Thanks man!
Worked out pretty well I'd say, wood can be very strong, get some glue in the screws and all the joints, you could even use small angle brackets on the insides to make it even stronger. The key to strong wood construction is glue. Pretty cool I bet you have under $10 bones invested.
BarnStangz $0 it was all scrap wood haha!
That came out good. The only thing different that I would do would be to trim down the face board so that it is just slightly smaller than the license plate.
Thank you Jerry! I actually have it installed on my Mom's bike and it is still going strong👍🏻
I love these DIY projects, I will wait for your one year update on how it holds up, but good job using materials on hand
Thank you man! It's holding up great still I'm surprised actually! I've gotten plenty of compliments on it as well. You just can't beat free!
I laughed when you said you were using wood. BUT it came out great looking. Good thinking!
How has it lasted?
Bro, you're so good. Your videos are like 10 million sub channel. Just saying, I've been here since the begging 😂
Also, let me buy one 😅
Thank you! Comments like that keep me going, I put a lot of time into my content so that's always nice to hear! Thank you for sticking around💯
Any time Bro! I'll stick around for sure!
Taro Meron If you really want one i can make it happen haha! It would be cheap
Attention Deficit please! Haha I just got a grom bc of you haha literally only 230 miles
TST makes the best budget kit @ $34.... my fender eliminator search had a special criteria and that was it had to be compatible with the addition of a subcage later down the road. A lot of kits aren’t compatible with a cage but the TST basic fender kit looks like it will work.
Definitely one of the better options.
This man is 24kt 420,,,chop 0n🍀💪
Talked to ya not too long ago when I was wanting to get a Grom...well today made the big purchase and got the Grom abs model. Now time to fix the mirrors and for sure do this. Then subcage
That's awesome congrats! All of those are a must.. and bars!
Attention Deficit right on, so far the bars aren't that bad so I'll have to play around with some others. But for the fender eliminator. I was thinking. Get a small sheet of aluminum. Still make the box like your wooden one. But then make a 3/4" lip on the bolt sides so you can bolt on the bottom
That would be perfect!
Bloody good job mate looks wicked
Thank you! I appreiciate it
Gotta admit I was a bit skeptical but it turned out awesome!
Thank you Wade! Hope you stick around here on the channel.
Bad ass dude!! Very talented
I know your new to youtube man but you've steppped it up big time. I really enjoy your videos great quality on video and sound and your so detailed keep it up bro you'll be a 50k subs soon hahaha
AJ Moore Thank you man I appreciate it👊
I found you on Insta too lol seriously my favorite channel now and that's saying a lot. I'm buying a grom real real soon also looking for a pit bike as well.
AJ Moore I'm glad to have you here on the channel! How did you find my video by the way? And nice man you will have a blast on either, make sure to send me some pics of whatever you get!
Well so I've had 4.5k set aside for quite some time. I was gonna buy a brand new grom. But I really wanted a pit bike and a dirt bike. I've now found me a grom for 2k I'm picking it up in a week. I'm gonna try and find a pit bike and a dirt bike too. I waited until now bc weather is cold lowers the price and people getting tax return and should be selling older toys. LOL I'm watching you race your dog now haha. And I found your channel I was on grom videos and I was watching fooligan I always scroll down and look for less sub channels bc they usually don't get enough respect and I came across your video of buying 4 grom. Since then all my free time I just go through your channel lol. Love all the snow wished we could get some here in TN we just get cold.... shewww sorry for blabbing so much. Have a blessed day bro.
+AJ Moore That's true on the cold lowering the price.. Just picked up something a couple of days ago should be a video up soon✔ Thank you for the support! Have a blessed day yourself👊
I Like the creativity but - the TST fender eliminator looks great for the Grom: it took around 3 days to receive and another hour to install w/ smoked light that eliminates those “shrek ear turn signals.”
Smoked integrated taillight
Fuse relay
Eliminator Kit
And relay wires
$153 roughly
Supper cheap !
Can't beat free!
Attention Deficit won’t say you’re wrong there -
Hey bro my name is Thagner, I live in Brazil and I have the dream of having an honda grom. At the moment it is not sold here, and I learned that the nearest country where it is sold is in Paraguay. I won't give up on that, and I'm even trying to contact Honda to make her purchase possible. I really liked the finder eliminator you made. I have no practice at all, but I will ask someone to do it for me as soon as I get the bike. I am already subscribed to your channel and will follow! Keep enjoying the bike and registering! Hugs...
Have a few bikes but decided to pick up a Grom to mess around on. Found the video and heard you mention Ohio. I’m up near Youngstown. Small world man. Creative solution for the tag, far lighter than stock.
Welcome aboard!
Great job!! Only thing I could've recommended would've been to paint the screws so they wouldn't stand out. Thanks for the videos!!
There is a lack of fender eliminator for the CRF230M/L's and non of them really got my attention. I tried salvaging a scooter license plate bracket and a water pump bracket and those failed miserably. Then one day I find a satellite dish, took it apart, used those brackets and painted it black to match. It's slightly crooked, yet very solid. You can see it in some of my videos. It's been on there now 2 years, compared to the other junk parts I used.
That is awesome! I'm glad you figured something out, my girlfriend wants a supermoto now and we talked about getting her a 230, how do you like it so far?
So I have 4 bikes. XR250, CR125, CRF230M and just last Friday, a Grom! So now that I have a comparison that we can relate to, I rode around on the Grom putting 100 miles on it(all stock). With the FMF setup and 14/38 sprocket, the power became very noticeable compared to the Grom. I have taken the interstate once with it, still wouldn't recommend taking the interstate like one shouldn't with the Grom. I think it is great for around town and paved farm/county roads. Aftermarket parts are somewhat of a challenge, even with that said, I feel like this is a good bike, I got it 4 years ago and just reached 17K miles.
Wow thanks for the detailed response! Sounds like a great option for her!
Wood really lol hey if it works that's why I love your Channel I did something similar to what you did at first I use the license plate bracket off the original fender bent the top a little drill holes to line up with the factory holes in the bike and installed I used it integrated turn signal and then bought a license plate light that goes and where one of the bolts would to hold the license plate on I send you a pic but I don't know how on here
Haha it works for now! If you have an Instagram you can send it to me on there, or on my FB page. Thanks for the comment!
good job man can i ask how does it bolt to the grom i didnt catch that bit
Using screws in stock fender holes
Sweet man looks great man
Maxwell Rundle Thank you!😁
The 4 corners of the square plate holder: u should add a nice curvy or beveled it a bit to give nice look
Great idea!
looks awesome way better than stock anyway
Thank you! I'm pretty happy with it for now.
Pretty good! what u should do is put a sheet of metal over the wood so it won't look home made. Great Job
Enrique Diaz If I had metal I would have made it out of metal🤣 Thanks for the comment though!
Nah it looks great even up close as is.
Thanks bro good video again I just got a 17 grom so I’m needing ur knowledge I’m picking ur UA-cam brain right now lol
Thank you man and what do you need to know?
Honestly as I been looking threw ur channel u have done a lot already I got a lot of work ahead lol I’ll let u know if I get stuck or need anything specific thanks again
Haha okay good luck man let me know if you need anything!
use rubber plugs to eliminate the issues with the hollow frame
This is clean! You should sell these!
with a plate at the bottom it might make a good spot to stash some small stuff in like registration insurance. a joint whatever.
He's in Ohio, they all use Opiods
Ima get a grom soon love the vids
How did you fix it to the bike? I may have missed it. Lol but I’m with you on the eliminator kit too expensive for what it is. I’m going to try this! Thanks!
You will have to watch the video😂 I just used a couple washers and screwed it from the top into the wood. If I were to do this again I would use a black plastic cutting board like a quarter inch thick or less. Would pretty much last forever. I'm glad I'm not the only one who doesn't like spending money haha. Thanks for watching!
Attention Deficit thanks! Yes, I’ll spend money on actual mods! I appreciate your videos just picked 2 2018 models up within 2 months because they’re just so fun!
Looks great Bro!!! Good job. I have almost Zero fabrication skill. I went to TST and got their kit. $169.95. Then I ordered 2 led turnsignals at $30 a pair. Ouch. Wish I would have seen this before I did that. Oh well........ Your KLX110 bars are next. Loved that video. Thanks for this video
Hey I bet you could wing it! TST was who I was originally going to go with but I'd rather spend that money towards something else. You pop a wheelie yet?? Thanks again for all the support and for being a part of the channel!
Attention Deficit
Yea!!! A really gay wheely. Lol. I'm learning though
Haha I'm sure you will get it
Without any turn signals or anything.. Literally just a piece of metal
Eric Andrikowich it will work with stock tail light. You will need aftermarket LED turn signals. I just got the whole fender eliminater kit. Went together super easy.
Don’t catch that fender eliminator on fire doing a Smokey burnout 🤙🤙
It survived all of the hell I put it through haha very happy with it.
'Welcome to Ohio, buddy'. Truer words have never been spoken. Just the other day i posted on facebook...
Mother Nature; You can't have all 4 seasons in 1 week.
Ohio;...Hold my beer.
Sonic Rainboom Gotta love it. At this point I'm ready for spring lol
Awesome work
Thank you👊
Attention Deficit hope to see more videos from u I’m ur huge fan now
Dara Morm Plenty of videos to come! Thanks for the support I hope you stick around!
@9:07 in the video I watching and hoping you go with a nice cherry stain @9:15 you ruined my dreams🤣Where about in Ohio? I'm up near Cedar Point. Just picked up a Grom and want to fab a bunch of my mods myself. Well done thank you for your time.
Sad face, my licence plate is bolted directing to the plastic, no metal piece holding the plate or reflectors.
i think if you check, you are suppose to have the reflectors installed
Not mandatory in my state but definitely recommended!
Do you think the abs takes away from the fun or worth it?
It's not worth it in my opinion! I don't see a need for it
Howcome? What about for someone new to bikes
Personally I don't trust them I think they can be a bit unpredictable at times.
Appreciate you responding. I have not rode a lot in my life but all the sources on google are saying it is safer. Even a life saver. I’m not sure. I’m buying one soon idkk what I’m going to get!
I'm sure it can be in some cases but at the end of the day it's a Grom.. I could see it being helpful on other motorcycles though
That looks good.
c v Thanks man!
I can't find this question in the comments or in the video but what did you use to mount it to the bike??
Screws!
Sweet Thanks brother
Looks good to me, Go Brownies!
☝🏻Wish I would have seen this before I did what I did lol!
Hey whatever works haha.
Found a used 2014 w/ only 300 miles for $2400, debating that or $3150 for new. What are your thoughts...i like the 2018 styling a little better
+Deric Watson Hmm if you plan on financing you might as well just pay a little bit extra for the SF. But if you are paying cash for a brand new one at the dealer you will get screwed with tax and fees so I'm not sure on that one..
Sorry should have said that. The used is at a dealer also...will be cash either way. I expected tax, but what other “fees” should I expect. Thx!
Deric Watson Well it depends on the stealership hopefully just tax and title fees, some charge assembly, etc.
Gotcha, thx man, I’ll find out the details from them. I grew up riding dirt bikes, 4 wheelers etc and sold me street bike when I got married. With 3 kids depending on me, I think the Grom may scratch the riding itch just messing around the neighborhood and town with a little less risk than getting another big bike. Your videos are really good...and don’t have a bunch of trash language so my 11 yr old son can watch with me!!
+Deric Watson Let me know what you end up with! And that's just about the same reason I got one, I appreciate the support and hope you stick around!
i know i’m late but if i install a sub cage do i need to do the eliminator
Nope!
Attention Deficit Thanks! i thought so but i wasn’t sure
If you're going to do something like that, you should at least spray over it with something like truck bed liner that way it doesn't have a wood appearance at all and it's more weather resistant.
What happens when u rush stuff. Before I send you say that would happen
going to this on the weekend, kinda puzzled on how you mounted it to the bike tho. hope ill get a reply
It's mounted using 4 screws with washers, coming through the top of the 4 holes left under the seat screwed directly into the wood. I hope that helped and good luck with the project!
Yo thanks for the reply. Will send u a dm when i get it done!
Awesome man can't wait to see it! If you send a nice horizontal photo I'll put it in a video!
Awesome! I'll sure do it.
I think I’m going to do this for my Razkull
Great work man what size wood did you us for it
On the sides what side did you cut it
Really nice. If youre doing it again sometime, consider using a thick black nylon cuttingboard instead of wood - they are only like 10$, easier to work with and you can modify without having to repaint. Can even get a pretty decent finish on them with abit of work
Whats the point in having a fender eliminator on a grom?
When did you get the subcage for the rear turn signals?
Yikes, i wouldn't pay $100 for the plate! Wait a minute i paid $100 for a dope fender illuminator.
Davin Link 😂😂
What model of handle bar you are using?
Do you not need rear view mirrors on the grom I see people have and some people don’t is it legal to not have em
Depends on the state! Here in Ohio you are required to have at least one👍🏻
Yooo do you remember by any chance when you took your motorcycle permit how many questions and tests it was and what some of the questions were going Tuesday trying to get the grom and go to bike week in wildwood nj next week
I believe 40 or so, I hope you get it! Thanks for watching man!
Just got my permit now to get a grom and bike week here I come thanks man
Lol did you say wanker ??? Didn’t think you guys used that cuss though it was mainly over here in the uk . At first I thought you was crazy using wood but for a low cost upgrade at home it worked great
smugBBQ I'm glad you caught that😂 I use it more as a joke than anything, I wish more people used that word over here haha. And thank you I'm pretty happy with it for not costing me a dime!
Nah we don't use that word here lol.
Nice 😎
Alin Thanks👊
I wanna eliminate my fender bro! How do I do that bro?
😮wow👍👍👍
Lets go ohio boys!!! Nice content keep it up 👍👍
Thank you my guy!
A little bit of Bondo or fiberglass work would have completely eliminated that wood look. But good job fam
Redesign it send out the design and have someone 3d print it . Then market it and sell it yourself great money maker.
The market is too saturated with eliminators, not worth my time really. I'd rather spend my time making more videos for you guys!
A+ for ingenuity but really come on... wood?? this bike has been out for like a hundred years you mean to tell me nobody has a simple fender eliminator kit that is worth a damn??
Still going strong 2 years later!
nice bike , i need to know the profile size of tire , , , , , , ,
I made a piece at work I'm about to bend up today I'll take some pics
That's awesome can't wait to see it!
@@AdventureDaily let me see if I can post it I can't figure out the wiring with the new tail light so I kept the stock turn signals on for now
How do you screw that to the bike?
The two holes where the stock fender was attached! Under the seat near the rear.
Thanks!
Life tip: Time is money. Don't waste dollars to save cents. Save your time and buy one
please do not make your subcage out of wood don't know if I would have went with wood only because when it gets wet things do happen to Wood I guess it was pretty creative I want with a hot bodies Fender Eliminator kit and made my own bracket so my plate tucks under and flips back so you can't see my plate and when I want you to see it I flip it forwards
I just might😂 That's why I painted it. It's still going strong months later so I can't complain. Nice man that sounds cool!
i wouldve used some of the stock fender plastic instead of wood... nvm rewatched vid not much plastic to make a flat piece like the wood lol
I've got a woody
lol u are god damn right about piece of bent metal
They are bending you over at the prices they are selling them for!! But hey that's business. I'd just rather spend that money elsewhere.
Am I the only one that dont mind having the fender ? lol
Yes
Step 1 remove fender
Step 2 zip tie license plate
😂😂 Yeah if you don't want signals or a license plate light.
You’re forgetting to take into account how much machinery for making a “piece of bent” metal costs. Or the amount of research you need to do to get it done and looking nice it. And to texture and color match. You get what you pay for. Lol probably why this looks like shit up close. A lot better than the fender tho
Why is it so bad to show your license plate
People can get your address with your plate number. I'm not really worried about it though that's what the second amendment is for😂
Bro i had to lift my grom to get the dam bolt out
Noooo
Wood,,,, ah hell NO! Your garage is FULL of metal stuff. Wood is a poor vibration manager. Bikes are made of metal because of how steel/aluminium handles vibration One piece of 3/16th's steel or Aluminium. Cut into a "T" with each side about 6 inches by 4 inches. Bend the vertical midway to 30 degrees. Bend each side 1.5 inches in. Find your OEM fender screws and remount the "NEW" plate holder. Drill for OEM plate light mount and holes on each side for OEM blinker lights. Connect electricals, and plate. GET OUT OF YOUR GARAGE and RIDE. Hopefully this wood obsession will disappear with the ride thrills. Your welcome.
This thing has lasted for almost 3 years now😂 I’d do it again if I had to.
Jesus fuck dude just get some scrap metal, same price as wood 🤣🤣🤣
Vagabond Fender Eliminator. 70 bucks.
rdizzo1313 $70 I can spend on something else..
I love my Vagabond kit. Looks great.
I was thinking about a DIY, but I ended up buying the Vagabond kit too, bolted right on the my clone. No regrets.
Nice!
Ohio, go figure 🤦🏼♂️
My neck is red and proud.
omg that looks like sh*t dude, who does that?? who makes this out of wood.
Where’s your eyebrows?
Above my eyes
great response! !!
Buy a $120 welder... start working in metal.... wood?! really?
Working with what I had. This thing has taken a beating and is still working strong.
Open your fuckin eyes
Are you okay?
Can someone please tell me how the wood is mounted to the bike