I have four washers that aren't going to be used. I don't understand why the cover doesn't need any washers on the bolt head side of the fender delete piece?
Screw heads on the outside look cosmetically pleasing. If you put the screws up top and nuts on the bottom it looks unrefined. Both ways will work just the same, just look different.
i believe im missing some bolts washers n nuts. i have the lower mount fender eliminator but only have 4 total bolts 4 nuts. 2 small washers n 2 big washers. was purchased from yal to
anthony campbell our customer service reps will be happy to straighten this out for you. Please drop them a line through the the support tab on our website.
Has anyone in chat ever removed the front fender? I just ordered the Motard snail front fender and want to remove the stock one. Ive seen pictures of bikes without the stock fender but theres no talk in the forums much less a video on it
You can use a compressor with a blow gun to try to shoot it out. The tube is welded into the frame in a way that it is partially open in the front. You may have to take some fairinggs off to get access. Make sure nobody is standing behind the bike when you do this.
I am assuming that you are referring to the "stock location" bracket and not the stock fender. Ours does but I can't guarantee that for any other brand light.
We sell our part kits in modules and make installation videos about each module. We do have several videos on rear lighting of this bike so check our channel for them. We have several different signals options as well as tail lights.
If you buy just the bracket kit you will not have a place to mount any signals. There is a way to mount up OEM signals to our pod signal mounting kit that can be purchased with this fender eliminator, but our own signal options are a bit nicer than reusing the stock setup. You can watch part 2 and 3 of this video to see the installation of our rear signal kits on this bike. You can also just navigate to each of those parts on our website and see the videos there tstindustries.com/Honda-Grom-2017/
Our website calculates the cost based on your total purchased items. Please visit the product page and have the website quote you the shipping price. Here is the link in case you didn't find it in the video description: tstindustries.com/Honda-Grom-2017/
@@victorboone we don't have a product page set up for just that bracket but if you contact our customer service guys they can probably create a custom order for you.
Our bracket is mainly designed for U.S. plates and fits a hole spacing of 5.4 to 6 inches with 5mm hardware. Therefore, you will have to verify if your plate fits within these dimensions.
Yes but the parts are slightly different. You can see that video here: ua-cam.com/video/z51BRFf4YeA/v-deo.html. This video may also interest you. We developed a really nice undertail / integrated taillight / fender eliminator package for your bike. You can see the video here: ua-cam.com/video/7uVaogjj08E/v-deo.html
No this setup is not the same as the 2016 model. However, we do have a different Undertail Fender Eliminator kit for the previous generation Grom available. You can watch our installation video below: ua-cam.com/video/7uVaogjj08E/v-deo.html
It does make sense to read carefully through the description of the item you are purchasing. In addition we make these nice videos that explain what you are getting and how to install it. I also don't know who charged you $50 for this kit as we sell it for 34.99.
TSTindustries It does make sense but I was excited about my brand new grom and was quick to purchase 😂 After shipping and everything my total was around the 50$ mark
We have a couple already on our bikes. The mass production tooling is going to be finished in a month and we will start manufacturing them. If you want to get on a list to be one of the first to have that setup please contact our CS people through the support tab on our website. I am sure that we will have a launch special for people who get on the list
You have to realize that we make our parts in modules, and shoot individual installation instruction videos. We have a separate one for signals, and another one for license plate light. So if you want a street legal bike it is very simple. Get the parts you need and we support you with the videos needed to install them.
will this work with a subcage?
I have four washers that aren't going to be used. I don't understand why the cover doesn't need any washers on the bolt head side of the fender delete piece?
Can I just take out the stock fender and leave it like that
Can you run this on the 2019 with a subcage as well or no ?
Aka 12bar
So just question, why thread bolts threw the bottom versus the top like they were 'stock'?? Does that matter?
Screw heads on the outside look cosmetically pleasing. If you put the screws up top and nuts on the bottom it looks unrefined. Both ways will work just the same, just look different.
Can I use a toce exhaust with this eliminator on my grom ? Or do I need the other one
i believe im missing some bolts washers n nuts. i have the lower mount fender eliminator but only have 4 total bolts 4 nuts. 2 small washers n 2 big washers. was purchased from yal to
anthony campbell our customer service reps will be happy to straighten this out for you. Please drop them a line through the the support tab on our website.
Has anyone in chat ever removed the front fender? I just ordered the Motard snail front fender and want to remove the stock one. Ive seen pictures of bikes without the stock fender but theres no talk in the forums much less a video on it
What should I do if a washer fell into the tube under the seat?
You can use a compressor with a blow gun to try to shoot it out. The tube is welded into the frame in a way that it is partially open in the front. You may have to take some fairinggs off to get access. Make sure nobody is standing behind the bike when you do this.
Where can I get license plate light?
Will an LED license plate light fit on the stock mount eliminator?
I am assuming that you are referring to the "stock location" bracket and not the stock fender. Ours does but I can't guarantee that for any other brand light.
Does the indicators still work from the back
We sell our part kits in modules and make installation videos about each module. We do have several videos on rear lighting of this bike so check our channel for them. We have several different signals options as well as tail lights.
@@TSTindustries im talking about the particular light shown in this video, does it have built in indicators??
Will I be able to mount my stock turn signal with this kit? Or will I have to purchase the signal mounting kit as well. Thx
If you buy just the bracket kit you will not have a place to mount any signals. There is a way to mount up OEM signals to our pod signal mounting kit that can be purchased with this fender eliminator, but our own signal options are a bit nicer than reusing the stock setup. You can watch part 2 and 3 of this video to see the installation of our rear signal kits on this bike. You can also just navigate to each of those parts on our website and see the videos there tstindustries.com/Honda-Grom-2017/
Great vid. How much for shipping to Canada??
Our website calculates the cost based on your total purchased items. Please visit the product page and have the website quote you the shipping price. Here is the link in case you didn't find it in the video description: tstindustries.com/Honda-Grom-2017/
Can i buy just the bracket ? To hold the plate
As in the bracket without the closeout and fasteners?
@@TSTindustries yes
@@TSTindustries just to hold the plate
@@victorboone we don't have a product page set up for just that bracket but if you contact our customer service guys they can probably create a custom order for you.
Thank you
Does it come with the parts to do both configurations
No, that would be wasteful. You chose the configuration you want before making the purchase.
TSTindustries I’m saying do you have to buy any extra parts for any of the configurations
Horbert and Marinda they literally just answered that
Hi there,
anybody have installed Stock Mount...? Is it works ok...? No vibrations or noise when you go fast...?
Thanks in advance !
We had that configuration installed on our shop bike for about a month and we didn't have any adverse symptoms.
se sabe si esta moto llega a Colombia?
No lo sé
Is this fender em illegal in C.A ?
DOT laws vary from state to state. It is up to you to verify the legality of any aftermarket part in your state before making your purchase.
Can this also hold European license plates?
Our bracket is mainly designed for U.S. plates and fits a hole spacing of 5.4 to 6 inches with 5mm hardware. Therefore, you will have to verify if your plate fits within these dimensions.
TSTindustries thank you
Our pleasure!
can you do this on a 2015?
Yes but the parts are slightly different. You can see that video here: ua-cam.com/video/z51BRFf4YeA/v-deo.html.
This video may also interest you. We developed a really nice undertail / integrated taillight / fender eliminator package for your bike. You can see the video here: ua-cam.com/video/7uVaogjj08E/v-deo.html
thanks
is it the same on the 2016?
No this setup is not the same as the 2016 model. However, we do have a different Undertail Fender Eliminator kit for the previous generation Grom available. You can watch our installation video below:
ua-cam.com/video/7uVaogjj08E/v-deo.html
Thanks
Just tell me the drill bit sizes in one sentence please
You don't need any drill bits... At the following time stamp 0:23 we list all the tools you need.
@@TSTindustries wrong video my fault Leme just find it here.. 🤔
I read the description wrong. I thought I was going to have turn signals after the installation. Instead I paid 50$ for a license plate mount
It does make sense to read carefully through the description of the item you are purchasing. In addition we make these nice videos that explain what you are getting and how to install it. I also don't know who charged you $50 for this kit as we sell it for 34.99.
TSTindustries It does make sense but I was excited about my brand new grom and was quick to purchase 😂 After shipping and everything my total was around the 50$ mark
TSTindustries If you guys would hurry up and make the intergrated tail lights already I could have ordered that instead!
We have a couple already on our bikes. The mass production tooling is going to be finished in a month and we will start manufacturing them. If you want to get on a list to be one of the first to have that setup please contact our CS people through the support tab on our website. I am sure that we will have a launch special for people who get on the list
or maybe we will see you at the Smoky Mountain Crawl and discuss this :)
Wa....... i want a grom~~
What if I can't get the fucking seat off😤😡😡😡😡
いちこめ
I have no idea here....
aaaah...."first comment"...got it
あなたは最初ですか？
Soooo a pointless delete since you no longer have a street legal bike lmao
You have to realize that we make our parts in modules, and shoot individual installation instruction videos. We have a separate one for signals, and another one for license plate light. So if you want a street legal bike it is very simple. Get the parts you need and we support you with the videos needed to install them.