I’m seventy, I’m old school, have worked on two strokes for over fifty years. Everything from go karts to snow mobiles, dirt bikes, etc. your work area, tools and knowledge are as good as it gets. It was a joy to watch a young man with a great skill set. I don’t much care about video editing and that kind of tech but I have to admit I was very well done.
Cameron Niemela..... Ever since I found you and your videos on you tube and then learned about your health, I have been thinking...... I would hate to lose you being the great attitude you have and how I have learned so much about dirt bike repair from you. Your knowledge and skill as a mechanic is second to none. I love watching learn/teach videos and I have found your technique easy to follow but yet straight to the point. Once again, Cameron hang in there we are all pulling for you !! I wish I could help but I know it's out of my hands. I will pray for you tonight . God says " If two or more pray I will be in the mist of you" God bless you !
The most amazing talent that cancer has sought out! I hate to hear that your not feeling well. I came across this most well thought out and precision assembly. Hats off big man hope you get the dreams lived that you want. Never stop doing what pleases man. Great and best assembly video I have seen in a while. I love how you didn't stop by cleaning up the inside. You even coated specific parts and cleaned up the entire outside.
Cameron, I'm more than twice your age (60), but you're a true inspiration bro. Your attention to detail on this engine build is exceptional. I've got two Bultaco Sherpas that need a full rebuild. One is really nasty. Also got a 1983 USA spec VF750F Interceptor that needs a full ground up restoration. Then there are the concept bikes I'm planning...! Just when I feel daunted by the enormity of m these tasks, one of your vids spurs me on. Thank you. Believe me, I don't offer praise or thanks very often. Too old to be a fanboy!!:) Only just discovered that you're not well. Am really sorry to hear that. I hope you're using cannabinol and all the other healthy stuff Mother Nature gave us. Cannabis, Cannabinol kills cancer cells, but if you're going down the allopathic medicine route (chemo etc) then it also helps your immune system fight the negative effects of modern solutions. I'm not an expert. I've just studied this a bit. Hope you have too. Get fully well again real soon buddy. All the best from the UK.
Have to give you an unprecedented amount of respect for your knowledge and craftsmanship. Your work ethic must is out of this world and you can tell you take pride in your work. I applaud you sir for the cleanliness of your work, and your work area as well! Keep it up man!
As an Auto-Mechanic of 30 years, who has watched, and disassembled some shade tree crap in my time... I am truly impressed. It was a dream, a good dream, of watching an engine go together. Subbed, and liked... Dude, you are the shite. I can't wait to see this engine run, run, run, and run some more. It is as good, or better than new. I cant even say how rare this is to see...
This is by far the most beautiful engine build I've ever seen in my life I've been to Supercross races I've been in the pits I've seen the motors on those Bikes their beautiful but this man this smokes them by a mile
I sold my 4 stroke awhile back and am now looking for a 2 stroke that I can put some time into and make nice. Your videos have given me the confidence to start tearing apart engines and customize them on my own!
For the first time in my life I see a relation between an engine and Human, I felt if I was watching a surgical operation beautifully gracefully done 100%.
Got to take my hat off to ya Cameron that was a great pleasure to watch the total transformation of the engine and you have a great eye for detail mate. Wishing you good luck in your recovery much Love from the UK ;)
thank you for taking the time to film, rebuild, video, edit, upload this, thoroughly enjoyed all aspects. would buy again, fast shipper A+++ good communication.
Beautiful job! That engine looked like it was under water or something when you started. Sorry to hear about your illness, I'm sure you'll recover. We need guys like you.
Timothy Taule yes brow...used silencer by accerbis n motul oil thats make my 2 stroke engine have good sound n smell,beside i have high rpm for make best top speed.that like screaming the eagle...
I just happened up on this video and it's great. I rode two strokes back in the day but to answer your question, I think some people just get on here to down grade other people. They are like water. They will just fade away down stream if you pay them no attention. I call them Idiots.
Jason Dinault it does normally look a lot easier on UA-cam than in real life. You are right. I’m an auto mechanic and believe me, they rarely show the aggravating parts.
you just got recommended for me an I already fell in love with you and your work. I want to become motorcycle mechanic and you are my big motivation. my problem is that I do not have anyone around I can learn from so youtube is my biggest help. I know the way is going to be long, hard and full of prejudice because I am a girl (at least in my city) but I don t care. so Thank You.
I can mentor you if you live in the San Antonio, Texas area. I'm a 54yr old FAA Certificated Airframe and Powerplant Technician. I have a 1991 & a 1994 Honda CR500, a 1981 Kawasaki KX80, a couple motorized bicycles, a lifted Yamaha golf cart with a 570cc snowmobile engine, chainsaw, weedwhacker, etc. for you to learn from. You don't need tools or money, just a willingness to learn & a good positive attitude & work ethic. Just send me a message thru UA-cam here.
Amazing video. The video quality was the best I've personally ever seen .Being a mechanic it was candy . I am sorry to here your sick I will say a prayer for you.
Mate that was bloody awesome to watch, fantastic job. You are not just a dammmmmmmmmmn great mechanic, you are a craftsman big time. Can’t wait to see this bad boy shred!!!!!!!!!!!!!
Thanx for another awesome video!! Only problem is that my CR 250 looks so plain now!! Lol. Sick edit, I've watched it 3 times now... Probably watch it a bunch more. Love your videos, keep up the good work. Super glad to see you doing better. Can't wait for the next video!! STAY PRYME!!! & RIDE RED!!!!
Jeez Christ cam lectron carburetor ..very nice 👍🏻 anyone looking forward to change carbs switch to lectron you don’t have to worry about jetting anymore it does for you don’t ask how but it rips ass ...altitude everything nice motor cam ....lots hours on that...bet keep it up.......
Wow! The Dremel with the polishing wheel!! Never cutting corners. Always building top of the line. Def my favorite dirt bike builder to watch. Hope all is well. Stay strong brother💪
Looking good cam, you definitely look strong and ready to beat cancer's butt! The engine came out great! I'm excited to hear about your opinions with the lectron carb. Keep up the good work brother! I'm going to have to order up one of those sweet pryme hats :)
Damn it's so nice I wouldn't want to ride it. I think I would just put bike in living room as a conversation piece. I have never been into redheads but damn I sure like this one. 😁
@@maxdavies9958 Easy mistake Max, it did sound like transmission, but in context, it could only have been transformation. It's nice restoration work all the same. Wish I had those skills. It's gratifying to see the work of others, that's why YT rocks. If you click on my name thingy I've put up a few horrible videos about my attempts at two strokes, and a couple of other things..
All I can say is your probably one of the best engine rebuilders I have ever seen and how a perfectionist you are at how you take your time and work very careful. Best of the best here bro Keep up the amazing work man. :)
i hope your feeling better buddy. all my friends and family are praying for you. i have only recently became a fan and i love your channel as i am a 2 stroke nut myself. Keep fighting the good figh,t as all of us keep asking and praying to God for your speedy recovery
Engine looks great. Please use gloves when assembling engines. Your body is incredibly weak and you don't need to absorb any chemicals through your skin.
Yo Bro, First of all, hope you are better. I have a video idea: How the clutch works. Would be good to see from *you* Greetings from a 16 Year old German boy🤘😂
ua-cam.com/video/XjWrVOMkCBc/v-deo.html hey Lukas schau dir mal dieses Video an. Dort wird die Funktion der Motorradkupplung sehr verständlich erklärt. Grüße von einem 17 year old german boy ✌
I'm putting together an old CR125 myself man. Doing the same thing you are doing. The frame came out so fresh and so clean using your tips....haha. mag wheel cleaner for the win!
Es un exelente video, muy profesional la grabacion de audio y video, muchas gracias por la traduccion a español, Es un placer ver trabajos tan bien realizados, saludos desde Buenos Aires, Argentina.
What a great engine and video. Thank you for sharing. Hey, in case it helps you or anyone, when the crankshaft end drops into the bearing bore a bit too easy like that, then you can use some Loctite shaft retaining compound to reduce chances of any free-play developing. I learned the hard way.
Sweet build i really liked the way you got that case looking so nice the last one i did i Polished a Honda 650 four with a dremel and the motor stil together on the frame i had never seen the wheels you used although mine came out pretty well yours came out nicer obviously pulling apart the parts was way better unfortunately my project was done in the winter in the northeast and i was working on the bike in my living room
As an engineer myself it's always a treat to see someone do a really decent job on a rebuild, looks great and I imagine it'll go pretty well too. Have you put any coating on the bare aluminium ?. Good job..
Engine is going in the frame soon! What bolt do I put in first?
Swingarm bolt.
Rear engine bolt/ swingarm bolt
swingarm bolt or
I think I would slide in the bottom engine mount Bolt just for support to slide the swingarm bolt in but I could be wrong
@@owenarsenault5955 pivot bolt goes into the swing arm bro
I’m seventy, I’m old school, have worked on two strokes for over fifty years. Everything from go karts to snow mobiles, dirt bikes, etc. your work area, tools and knowledge are as good as it gets. It was a joy to watch a young man with a great skill set. I don’t much care about video editing and that kind of tech but I have to admit I was very well done.
Copisetic 1 where can I get one of those grinder stands with that wheel
yes well done work. im gonna do up my ktm soon. need a stand like yours!
Copisetic 1
yeah not just d skill but
the equipments as well were great
Respect
ty cole
Why, Do you want to Sit on it and tickle your Yam Bag while your Buddy Cranks it !
i really like the clean environment of your workshop. its almost like an operating room in a hospital.
Lol
Well operating rooms look very clean in movies
but in reality it sometimes looks like a slaughterhouse
Cameron Niemela..... Ever since I found you and your videos on you tube and then learned about your health, I have been thinking...... I would hate to lose you being the great attitude you have and how I have learned so much about dirt bike repair from you. Your knowledge and skill as a mechanic is second to none.
I love watching learn/teach videos and I have found your technique easy to follow but yet straight to the point.
Once again, Cameron hang in there we are all pulling for you !! I wish I could help but I know it's out of my hands. I will pray for you tonight .
God says " If two or more pray I will be in the mist of you" God bless you !
Well put Ringo. Life is not fair, the older we get the more evident that becomes. I pray he makes a full recovery.
The most amazing talent that cancer has sought out! I hate to hear that your not feeling well. I came across this most well thought out and precision assembly. Hats off big man hope you get the dreams lived that you want.
Never stop doing what pleases man. Great and best assembly video I have seen in a while. I love how you didn't stop by cleaning up the inside. You even coated specific parts and cleaned up the entire outside.
Cameron, I'm more than twice your age (60), but you're a true inspiration bro. Your attention to detail on this engine build is exceptional. I've got two Bultaco Sherpas that need a full rebuild. One is really nasty. Also got a 1983 USA spec VF750F Interceptor that needs a full ground up restoration. Then there are the concept bikes I'm planning...! Just when I feel daunted by the enormity of m these tasks, one of your vids spurs me on. Thank you. Believe me, I don't offer praise or thanks very often. Too old to be a fanboy!!:)
Only just discovered that you're not well. Am really sorry to hear that. I hope you're using cannabinol and all the other healthy stuff Mother Nature gave us. Cannabis, Cannabinol kills cancer cells, but if you're going down the allopathic medicine route (chemo etc) then it also helps your immune system fight the negative effects of modern solutions. I'm not an expert. I've just studied this a bit. Hope you have too. Get fully well again real soon buddy.
All the best from the UK.
You’re a fighter Cameron no doubt in my mind your gonna’ beat this cancer. Thanks for inspiring people! And the Engine is amazing!
Awesome job!!
Thanks guys!
Jay cutler
It is
Great to watch someone at work, who really knows what they are doing. Good job.
Love the pride you have in your work. Nice clean work area too.
Have to give you an unprecedented amount of respect for your knowledge and craftsmanship. Your work ethic must is out of this world and you can tell you take pride in your work. I applaud you sir for the cleanliness of your work, and your work area as well! Keep it up man!
Top job man, Love how gentle you were with the disassembly and reassembling everything, Looks mint!
As an Auto-Mechanic of 30 years, who has watched, and disassembled some shade tree crap in my time...
I am truly impressed. It was a dream, a good dream, of watching an engine go together.
Subbed, and liked... Dude, you are the shite. I can't wait to see this engine run, run, run, and run some more. It is as good, or better than new.
I cant even say how rare this is to see...
Hope ur getting better man, your definitely the #1 dirt bike rebuilder on UA-cam
This is by far the most beautiful engine build I've ever seen in my life I've been to Supercross races I've been in the pits I've seen the motors on those Bikes their beautiful but this man this smokes them by a mile
Damn, that motor looks better than new, old man Honda would be proud for sure!
I sold my 4 stroke awhile back and am now looking for a 2 stroke that I can put some time into and make nice. Your videos have given me the confidence to start tearing apart engines and customize them on my own!
This engine is gonna beat cancer keep up The good Work Cameron
Excellent detail and 2 strokes rule , This is the first of your vids i have seen but not the last !
For the first time in my life I see a relation between an engine and Human, I felt if I was watching a surgical operation beautifully gracefully done 100%.
Got to take my hat off to ya Cameron that was a great pleasure to watch the total transformation of the engine and you have a great eye for detail mate. Wishing you good luck in your recovery much Love from the UK ;)
Sick build..keep fighting the fight bro. Keeping you in my prayers.
Your craftsmanship is second to none My Friend ..Praying For You
thank you for taking the time to film, rebuild, video, edit, upload this, thoroughly enjoyed all aspects. would buy again, fast shipper A+++ good communication.
holy shit look at that adjustable engine build stand, you decadent fuck you
did you freeze those case bearings ahead of time, or are they that loose of a fit
Love the attention to detail - a real tradesman
Beautiful job! That engine looked like it was under water or something when you started. Sorry to hear about your illness, I'm sure you'll recover. We need guys like you.
Excellent video, such a quality production, and of course a beautiful, careful rebuild. Well done Cameron
I like the sound of 2 stroke engine,the sound is so crispy...
the sound and smell of aohcal 2 syk
Timothy Taule yes brow...used silencer by accerbis n motul oil thats make my 2 stroke engine have good sound n smell,beside i have high rpm for make best top speed.that like screaming the eagle...
z
Immaculate work! From the video ography to assembly. Love it
I don't get how someone could dislike this
me either....guess people paid to do that
I just happened up on this video and it's great. I rode two strokes back in the day but to answer your question, I think some people just get on here to down grade other people. They are like water. They will just fade away down stream if you pay them no attention. I call them Idiots.
Mainly because after all that work.. he installed a cast piston
It probably had to do with tearing down an already tore down engine. No oil mess, no stuck gaskets, everything just slid apart with no fuss at all.
Jason Dinault it does normally look a lot easier on UA-cam than in real life. You are right. I’m an auto mechanic and believe me, they rarely show the aggravating parts.
Beautiful motor , you made all us 2 stroke lovers proud . amazing craftmanship.
you just got recommended for me an I already fell in love with you and your work. I want to become motorcycle mechanic and you are my big motivation. my problem is that I do not have anyone around I can learn from so youtube is my biggest help. I know the way is going to be long, hard and full of prejudice because I am a girl (at least in my city) but I don t care. so Thank You.
I can mentor you if you live in the San Antonio, Texas area. I'm a 54yr old FAA Certificated Airframe and Powerplant Technician. I have a 1991 & a 1994 Honda CR500, a 1981 Kawasaki KX80, a couple motorized bicycles, a lifted Yamaha golf cart with a 570cc snowmobile engine, chainsaw, weedwhacker, etc. for you to learn from. You don't need tools or money, just a willingness to learn & a good positive attitude & work ethic. Just send me a message thru UA-cam here.
Thanks for showing this. I never had the nerves to do this but at least I can see what's in there.
Amazing video. The video quality was the best I've personally ever seen .Being a mechanic it was candy . I am sorry to here your sick I will say a prayer for you.
Your content deserves over a million subs keep up the great work 🤘🏼
dude that head on that thing is gorgeous ! the hole engine could be in a museum.
You’re an excellent photographer and editor. Great video. I hope you kick cancers ass!!
Daniel p☺☺😊😢😊😢👍👍👍👍😢😢😢5?!🎂👍
Mate that was bloody awesome to watch, fantastic job. You are not just a dammmmmmmmmmn great mechanic, you are a craftsman big time. Can’t wait to see this bad boy shred!!!!!!!!!!!!!
Can't wait to see the final product
Beautiful video! 10 minutes rarely passed this fast on UA-cam! Good luck with your health and your awesome bike!
Thanx for another awesome video!! Only problem is that my CR 250 looks so plain now!! Lol. Sick edit, I've watched it 3 times now... Probably watch it a bunch more. Love your videos, keep up the good work. Super glad to see you doing better. Can't wait for the next video!! STAY PRYME!!! &
RIDE RED!!!!
I have a 02, I’ve been sitting on for a few years, definitely going to follow your build! Awesome work!
Poland keeps my fingers crossed for you
bartek poland keeps fingers crossed for you
@@piotrekzerzuch38 what do you want?
You’re the master. Nothing but respect! Video looks amazing, the same as the engine! Just WOW!
Jeez Christ cam lectron carburetor ..very nice 👍🏻 anyone looking forward to change carbs switch to lectron you don’t have to worry about jetting anymore it does for you don’t ask how but it rips ass ...altitude everything nice motor cam ....lots hours on that...bet keep it up.......
Wow! The Dremel with the polishing wheel!! Never cutting corners. Always building top of the line. Def my favorite dirt bike builder to watch. Hope all is well. Stay strong brother💪
Wish you would have showed mountkng the carb and reeds
I like the no talk high resolution video of the process with chill background music
Clean work, nice video 🔝👍🏼
Cameron, I hope you feel better. Great videos. You have inspired me to get back in the garage.
Sweet build man, love the music.
One of the most beautiful and serene video I have ever seen. Thank you!
Looking good cam, you definitely look strong and ready to beat cancer's butt! The engine came out great! I'm excited to hear about your opinions with the lectron carb. Keep up the good work brother! I'm going to have to order up one of those sweet pryme hats :)
renault 4 gtl
how i wish i have a shop like this ,complete tools..i love engines
Damn it's so nice I wouldn't want to ride it. I think I would just put bike in living room as a conversation piece. I have never been into redheads but damn I sure like this one. 😁
This is by far the best 2 stroke rebuild I have ever seen!
Hahaha, you said “wow it’s so cool to see the transmission this engine went through”. Brilliantly done though mate! Great work!
Transformation I think. Hard to hear it though...
@@logotrikes I don't remember posting that comment XD i'm reading it now thinking why did i say that?
@@maxdavies9958 Easy mistake Max, it did sound like transmission, but in context, it could only have been transformation. It's nice restoration work all the same. Wish I had those skills. It's gratifying to see the work of others, that's why YT rocks. If you click on my name thingy I've put up a few horrible videos about my attempts at two strokes, and a couple of other things..
@@logotrikes Yeah i'm not gonna watch back the video to see what he said, i will take your word for it haha. I will check out your channel too.
As My 12 Year old Son Says Kick Ass Man You're The Best. Up here in Canada wee love you!!!
Your the best UA-camr I've seen so far. Your content deserves a Lot a Lot of views
I hope you feel better and we're always here to support you❤🔛🔝
All I can say is your probably one of the best engine rebuilders I have ever seen and how a perfectionist you are at how you take your time and work very careful. Best of the best here bro Keep up the amazing work man. :)
Thanks man! Much appreciated
Gorgeous 😍😍😍😍😍
Genios espectaculares.Maravilloso trabajo profesional y estético.Saludos y admiracion desde Argentina!!!!
This engine became a dream
And it started as a turd.
Honda CR125 Motard ghgngb
i hope your feeling better buddy. all my friends and family are praying for you. i have only recently became a fan and i love your channel as i am a 2 stroke nut myself. Keep fighting the good figh,t as all of us keep asking and praying to
God for your speedy recovery
I love tearing stuff apart, it's the putting it together again where my brain locks up and I can't remember anything...
u built your engine wth passion and love. i rly enjoy
Engine looks great. Please use gloves when assembling engines. Your body is incredibly weak and you don't need to absorb any chemicals through your skin.
@@thisisdeafening9933 he is fighting cancer smart ass. And yes, I am old enough to be his father.
And don't use gloves with grinder/ buffing wheels!
M Bourke health and safety butt face you have been corrected.
Most oil-based products only take about 10 mins for properties thereof to be absorbed into the bloodstream.Many chemicals likewise.
@@rattusnorvegicus4380 I'm typically not very careful around these chemicals bur I'm realizing that is very foolish.
BEAUTIFUL!!! Keeping you in my prayers too!!
What a pleasure to "swallow" your images. Thanks a lot for sharing
This garage is insane. This guy has everything. Epic!!
Yo Bro,
First of all, hope you are better.
I have a video idea: How the clutch works. Would be good to see from *you*
Greetings from a 16 Year old German boy🤘😂
Lukas Radzimski Servus! :D
Hallo, wenn du Bock hast kann ich dir erklären wie ne Kupplung funktioniert✌️fänds aber auch geil wenn Cameron nen Video drüber macht
Thanks dude! I did cover a lot of that in this video ua-cam.com/video/C7cl2vgUA_4/v-deo.html
ua-cam.com/video/XjWrVOMkCBc/v-deo.html
hey Lukas schau dir mal dieses Video an. Dort wird die Funktion der Motorradkupplung sehr verständlich erklärt.
Grüße von einem 17 year old german boy ✌
Danke für die ganzen Antworten, werde mir mal das videos geben 😇
I'm putting together an old CR125 myself man. Doing the same thing you are doing. The frame came out so fresh and so clean using your tips....haha. mag wheel cleaner for the win!
Un unbelievable
Great video mate!... and how important is not only having the right tools but also on hands!
If I order some stickers will you sign them?!?!?
Yeah absolutely! Just make a note when you order
Es un exelente video, muy profesional la grabacion de audio y video, muchas gracias por la traduccion a español, Es un placer ver trabajos tan bien realizados, saludos desde Buenos Aires, Argentina.
2 stroke engine use Accerbis silencer wow that good sound to my ear...
ITS NOT ABOUT THE SLIENCER ITS ABOUT THE PIPE THEY ARE THE HEART OF A 2 STROKE
Awesome job Cameron, hope you get well soon bro and keep working on 2 strokes bikes for ever...
Excelente 🇩🇴🇩🇴🌎
Mantab pakdhe...👍👍👍
bensalenkkari
So glad to see your feeling better! Cant wait for more vidz to come!!
"It is incredible to see the transmission this engine went through" :-D
What a great engine and video. Thank you for sharing. Hey, in case it helps you or anyone, when the crankshaft end drops into the bearing bore a bit too easy like that, then you can use some Loctite shaft retaining compound to reduce chances of any free-play developing. I learned the hard way.
OMG this is better than porn
видео завораживает, люди которые что то делают своими руками, в наше время, просто Very gud!
Best dirtbike channel on youtube, God bless you bro stay winning
Sweet build i really liked the way you got that case looking so nice the last one i did i Polished a Honda 650 four with a dremel and the motor stil together on the frame i had never seen the wheels you used although mine came out pretty well yours came out nicer obviously pulling apart the parts was way better unfortunately my project was done in the winter in the northeast and i was working on the bike in my living room
Engine come up Beautiful man! Love those engines and also the KX250 version they are weapons....
Woooow....you’re a master in restoration..
When you love Cameron’s vids so much you watch them over and over until he posts a new one
Wishing you, all the Best Cameron, for a full Recovery. Love the Video,s
Malc from the U.K.
Excellent work Cameron !!! really enjoy the rebuilt and your craftsmanship, is a Masterpiece !!!. Please show more videos. Thanks.
This looks so easy with the proper tools.
As an engineer myself it's always a treat to see someone do a really decent job on a rebuild, looks great and I imagine it'll go pretty well too. Have you put any coating on the bare aluminium ?. Good job..
凄く丁寧な仕事で見ていて気持ちいい
DUDE! You are the GOAT! Mad props on the skills, work ethic, and precision. Cheers.
Great job! You've inspired me to begin the refurb of my 1998 KX250. Stay strong and keep fighting!
Something very calming and relaxing about these videos.
This is the ART that brought me to this channel to begin with.