Thanks for watching the tutorial! Let me know if you have any issues or questions below. If you're looking for more physics tutorials in Blender, check out my Mantaflow Fluid Sim tutorial I just put out: ua-cam.com/video/E50G2wiECwY/v-deo.html
For those of you where the exploded particles stick to the initial mesh: In the Shape section of the Cloth simulation in the Physics tab: change the stiffness value under the Pin group to 0
that music at the end reminded me of vulfpeck, great tutorial very helpful, i had to do something like this with a moving object, and the only thing that I would add is that clicking "Dynamic Mesh" in the cloth "Shape" tab makes it.
Thanks for the tutorial . I can get this to work on a simple cube but that is the only thing I can get to work. Even using suzanne I can't get this to work. It is nice looking if you are looking to shred a cube or a sphere, some simple geometry but any more detailed geometry I have all kinds of messed up results.
@@BlenderTutor is a pleasure. Thank you for sharing his channel I will check it out and it is true what you say it is chill 🤩. Keep it up making awesome tutorials man.
Bake portion at 9:56 seems to take 1 frame an hour. My two models I'm using to transition were about 4,000 faces total. Just, an fyi this is a very intense transition with a lot of calculations going on in the background.
Hey man I'm having issues with my wind, I'm using the silk setting and even lowered my weight per vertex to 0 but it just doesn't seem to to be affecting the simulation despite the strength at 50000, any ideas?
Just go into edit mode, select any vertices of the object move it , get back in to object mode. You are done . It seems a bug but this quickly resets the simulation of me. Do it each time if win does not effect object
Great tutorial! Cheers. I'm having some issues in Blender 2.93 where the particles seem to disintegrate properly when I preview scrolling the timeline but when I bake or export the animation, the balls start clumping up. Any idea why this is happening?
@@Duuude9448 The subdivision settings were different between viewport and render. I set both to one, and issue is fixed. Don't ya hate it when it's the little thing you overlook?
@@ShawnFerrell thx mate ! but i found problem and yes it was subdivision u just need to apply it before render :) i spend like all day to figure it out !
It is hard to tell without seeing for file, but one reason I've experienced is if the modifiers are in the wrong order. Make sure the modifiers are in the same order as in the tutorial, and that the particle system settings are also the same.
Hey, does anyone know if this works in 2.93 everything looks as should in the viewport but in final render cloth doesnt render, furthermor, the problems seems to be the particle sim modifier because when i delete it, obviously the cloth turns into a jumbled mess but it renders where as when i disable all the other modifiers still doesn’t render cloth as long as the particle modifer is there, also tried the project all over again in 2.92 and same issue is this a bug or? Ive searched for hours also for a hidden hide button that i may be missing but everything is activated🥵
Hmm, everything worked ok on my end in Blender 2.93. Eevee or Cycles? And is everything baked? Or possibly the render layer is turned off but the viewport layer is turned on?
Hey so i figured out the problem which in looking back makes more sense now, basically i had set the emitter to not show like in a typical particle simulation but because the emitter is technically what makes up the “cloth” it’s important that it does show up in the render so just ticking that fixed everything, as always it was just a dumb mistake good tutorial and cheers!
it didnt work for me when you press "i" the first time to make a key frame!, blender ask me what kind of keyframe i want, anda there are so many i dont know what is the correct :/
you press I when you select the gravity. first type in the gravity you want then press , move a frame forward and then type in the new gravity and press I again
great stuff! i'm having a problem getting the particles off my cube. I adjusted the strength and flow but still seem to only get the middle faces too clear. Thanks!
Thanks for watching the tutorial! Let me know if you have any issues or questions below. If you're looking for more physics tutorials in Blender, check out my Mantaflow Fluid Sim tutorial I just put out: ua-cam.com/video/E50G2wiECwY/v-deo.html
My weight gradient instead of being a line is a weird circle being projected on the cube. What version of blender were you using, I'm using 2.91?
my gravity doesn´t work it just keeps it in zero gravity alwayz :C
fixed it but now my cloths keep moving by its own not all of them but some
fixed it !!!!!! hahahaha
@@lucasyoshida2274 how did you fix my sim is completey ignoring the vertix proximity
For those of you where the exploded particles stick to the initial mesh:
In the Shape section of the Cloth simulation in the Physics tab: change the stiffness value under the Pin group to 0
Thank you so much 🙏
Life Saver
The best disentigration effect I have seen in blender so far.
that music at the end reminded me of vulfpeck, great tutorial very helpful, i had to do something like this with a moving object, and the only thing that I would add is that clicking "Dynamic Mesh" in the cloth "Shape" tab makes it.
nice and concise
this is seriously underated
This was pretty neat. I'd love to see a tutorial for discombobulation.
Thanks for the tutorial . I can get this to work on a simple cube but that is the only thing I can get to work. Even using suzanne I can't get this to work. It is nice looking if you are looking to shred a cube or a sphere, some simple geometry but any more detailed geometry I have all kinds of messed up results.
Man WTF you deserve alle the subscribers and views existing on youtube!
Great tutorial man. Thanks!!
Thanks, your work is great.
amazing bring tutorial inspiracion
Thanks so much! On the point and so helpful!
This is AWESOME! Thank you for the wonderful video. Subscribed.
didn't know that it's possible to make this effect.
Awesome video man. The music in the beginning of the video is like I was watching Animal Crossing New Horizon game 😃😄😁
Thank you! And yeah, its so chill, its from an artist Louie Zong, here is his channel, so much good music!
ua-cam.com/users/everydaylouie
@@BlenderTutor is a pleasure. Thank you for sharing his channel I will check it out and it is true what you say it is chill 🤩. Keep it up making awesome tutorials man.
to fast for me ... i am from Romania, not speak english very good, but appreciated your work and i follow - start to finish!
Bake portion at 9:56 seems to take 1 frame an hour. My two models I'm using to transition were about 4,000 faces total. Just, an fyi this is a very intense transition with a lot of calculations going on in the background.
Thnx a lot for this but how do i make it loop like the animation in the start?
Great
Hello, it's great but how do you make disintegration for Spider-Man??
yes
I did it fine with a cube. But when intry it on my ownnobject (door knob) i cant get it to atop exploding immediately
well, thanks for the tutorial but that earth distruction is...is...I wish I can UNSEE IT!
Hey man I'm having issues with my wind, I'm using the silk setting and even lowered my weight per vertex to 0 but it just doesn't seem to to be affecting the simulation despite the strength at 50000, any ideas?
Just go into edit mode, select any vertices of the object move it , get back in to object mode. You are done . It seems a bug but this quickly resets the simulation of me. Do it each time if win does not effect object
i have a problem in render , when i render in cycles my particles dissapears
Wow thanks :D
Great tutorial! Cheers. I'm having some issues in Blender 2.93 where the particles seem to disintegrate properly when I preview scrolling the timeline but when I bake or export the animation, the balls start clumping up. Any idea why this is happening?
The earth disintegration effect was beautiful. Did you use again cloth simulation for that effect? what are the differences?
This looks great in my preview render. But when I render it, the cloth doesn't tear, it stretches and bends. Can't figure out why.
Before baking the cloth go back to object mode,dont stay at weight paint mode.
did u fix it ? cause i have same problem in view port all looks good when i press f 12 ( render ) its a stretch mess !
@@Duuude9448 The subdivision settings were different between viewport and render. I set both to one, and issue is fixed. Don't ya hate it when it's the little thing you overlook?
@@ShawnFerrell thx mate ! but i found problem and yes it was subdivision u just need to apply it before render :) i spend like all day to figure it out !
Hey. I can't keyframe the gravity. My only option is to keyframe location and stuff.
When I try to render the clip. It's not working right. It doesnt look like what I have in the viewport.
I bet thank is watching this tutorial
thx!!!!
😁😁😁thankssssss
Now I know "once your happy with..."
I have a problem, my cube won't dissolve, it just become simple cloth.
Any solutions ?
It is hard to tell without seeing for file, but one reason I've experienced is if the modifiers are in the wrong order. Make sure the modifiers are in the same order as in the tutorial, and that the particle system settings are also the same.
@@BlenderTutor
i think i've done it wrong because at the weight paint view, my model(?) doesn't tear off.
But no, it works.
Thanks.
how do i bake in eeve faster?
13:03 WTF? did you do some change with Wind or not?
showed deep understanding I guess
when i render all th peices seem to attach to the original shape could someone help?
Hey, does anyone know if this works in 2.93 everything looks as should in the viewport but in final render cloth doesnt render, furthermor, the problems seems to be the particle sim modifier because when i delete it, obviously the cloth turns into a jumbled mess but it renders where as when i disable all the other modifiers still doesn’t render cloth as long as the particle modifer is there, also tried the project all over again in 2.92 and same issue is this a bug or? Ive searched for hours also for a hidden hide button that i may be missing but everything is activated🥵
Let me try this in 2.93 and get back to you
Hmm, everything worked ok on my end in Blender 2.93. Eevee or Cycles? And is everything baked? Or possibly the render layer is turned off but the viewport layer is turned on?
Hey so i figured out the problem which in looking back makes more sense now, basically i had set the emitter to not show like in a typical particle simulation but because the emitter is technically what makes up the “cloth” it’s important that it does show up in the render so just ticking that fixed everything, as always it was just a dumb mistake good tutorial and cheers!
is there a reason why this would work with a cube but not with a more complex object?
Not that I can think of, this should work on any object that you can follow this workflow with.
How do you do it this is my 14th time trying,ican't just remember
dosnt really work, main problem is, that the particles are disappear very fast.
Yes great, but i think your missing a few thing. you have a displace mod which you don't mention and I recon a few other things you haven't exspained.
it didnt work for me when you press "i" the first time to make a key frame!, blender ask me what kind of keyframe i want, anda there are so many i dont know what is the correct :/
you press I when you select the gravity. first type in the gravity you want then press , move a frame forward and then type in the new gravity and press I again
@@lmckeown123 ok i'll try! Thanks!
use location
@@issacike2868 thanks Issac!
outer square won't pin..
Elegans
great stuff! i'm having a problem getting the particles off my cube. I adjusted the strength and flow but still seem to only get the middle faces too clear. Thanks!
You're not alone. I have restarted the tutorial a third time now and the same results each time.
Default Cube I don't feel so good...
Pacing started out great, then you sped up and started flying through the steps, making hard to follow. whether following along or just watching.
3:07 *wireframe mode
abal
It's not a good tutorial at all, everything went above my head, I don't know what am I doing actually
In my View port all good but when i render its a stretch mess can some1 help plz