we use the exact same setup except we hook the hook in the bottom foot and use a small shackle around the cable and hook it in the top lifting hole. we had a compressor bounce from grazing the ladder and it came un hooked and was trashed. figure this way even of if it came unhooked it would slip a short distance then stop as the hook wouldn't pull through the shackle.
Really cool. Thanks for posting this. Ill be getting one of these unless you re-Post that it is a piece of junk and died, but i looked it up on harbor freight and its $99.00 and has Good Reviews. Like 4.5 stars i think it was. I did notice one thing it needs a cooling cycle every load run. 25%. So if u lift for 2 minutes it needs to be off for 6 minutes. Which can be a pain in the rear if it keeps kicking off on high temp overload. Shielding from the hot sun in the summer prob would help on 100 degree hoisting days. A Fan blowing on motor will help too if your hoisting alot. Key to Hoisting probably --- do the Heaviest item first. Hoist-Gen2 --- combination sun shield & fan assy for mounting above hoist. Lol.
OcRefrigeration,Hvac & Electrical. we use this exact one and pull up 6 or 6 compressors and all tools probably 30 minutes worth of lofting and never waited and ot has done fine. not saying it's right but
OcRefrigeration,Hvac & Electrical. Yeah. That day I ran it and it never shut off. Several trips non stop. I've only had it shut off once a really tall building. Just cooled it down for a few minutes.
Super epic Ulises! Harbor to the rescue. That is the hardest part about roof jobs...getting all the gear up & down. Tie it around your waist hehe! What did u use to secure the unistrut to the ladder cage?
Ulises Palacios Nice Bro, I tried to rig the Supco attic jack to lift a comp today. It didn't work out so well. I need to figure out something. Maybe I will run to Harbor.👍😎
How long did that compressor last? Trane scrolls don’t like 407C. We retrofit 407C all the time and by experience they don’t like 407C. Stick R22 to be safe
Hey Ulises should teach your helper not to stand under the load "never" and if ever does pull him up with that hoist and spin his ass around like a piñata ..jk 😊😁 good video bro...
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
That is a pretty slick set up, I might have to copy that, thanks for posting
Capitol Refrigeration,Heating,and Cooling you will like it.
This is awesome! Is it still working well for you? Any improvements to tricks you've picked up?
Great setup and video man! Your helper... not the brightest but he is much improved now that he's standing. lol
HVAC in SC lol 😂 true. He didn't lay down on the job that time.
we use the exact same setup except we hook the hook in the bottom foot and use a small shackle around the cable and hook it in the top lifting hole. we had a compressor bounce from grazing the ladder and it came un hooked and was trashed. figure this way even of if it came unhooked it would slip a short distance then stop as the hook wouldn't pull through the shackle.
awsom70 damn that sucks. Warranty lol.
LoL
What about regular stores like Starbucks that don't have ladder access? What do you use to hold winch?
I thought only my company had helpers like this....lol.
Tom Bell lol 😂 I think we all have helper like this unfortunately
Really cool. Thanks for posting this. Ill be getting one of these unless you re-Post that it is a piece of junk and died, but i looked it up on harbor freight and its $99.00 and has Good Reviews. Like 4.5 stars i think it was. I did notice one thing it needs a cooling cycle every load run. 25%. So if u lift for 2 minutes it needs to be off for 6 minutes. Which can be a pain in the rear if it keeps kicking off on high temp overload. Shielding from the hot sun in the summer prob would help on 100 degree hoisting days. A Fan blowing on motor will help too if your hoisting alot. Key to Hoisting probably --- do the Heaviest item first. Hoist-Gen2 --- combination sun shield & fan assy for mounting above hoist. Lol.
OcRefrigeration,Hvac & Electrical. we use this exact one and pull up 6 or 6 compressors and all tools probably 30 minutes worth of lofting and never waited and ot has done fine. not saying it's right but
OcRefrigeration,Hvac & Electrical. Yeah. That day I ran it and it never shut off. Several trips non stop. I've only had it shut off once a really tall building. Just cooled it down for a few minutes.
I Been Roping stuff up for 36 Years , time to treat myself to a Hoist.
OcRefrigeration,Hvac & Electrical. Your back will thank you.
Super epic Ulises! Harbor to the rescue. That is the hardest part about roof jobs...getting all the gear up & down. Tie it around your waist hehe! What did u use to secure the unistrut to the ladder cage?
Jon HVAC yup Lol. I use a clamp, Some u bolts and zip ties for added safety.
Ulises Palacios Nice Bro, I tried to rig the Supco attic jack to lift a comp today. It didn't work out so well. I need to figure out something. Maybe I will run to Harbor.👍😎
Ulises Palacios Nice. Good old Harbor town. Seems to fit the unistrut like a glove to.
HVAC/R Junky it will be worth it.
That winch weighs ton by itself. How did you get it up there? Rope it?
Douglas Kahane it's. It not heavy. Yes I roped it up. Along with the unistrut.
Where did you get that from
It’s funny, you never used that contraption when you worked with me as your helper.
Where's Scotty when ya need him?!
That's pretty sweet ....... good idea I do it the hard way and rope everything up and down even the compressor
JUAN JASSO yup. I'm tired of doing it the hard way lol. I'm getting old haha.
What area do you work ???
I saw a video the other day you were in ftw ??
JUAN JASSO yup. Everywhere from Grandbury to Sherman. All over dfw. This was in Decatur.
Preaching to the choir.
Cool video bud!!!
Pedro Rodriguez thanks buddy
Thank you for the good videos and keep the ball rolling buddy!!
How long did that compressor last? Trane scrolls don’t like 407C. We retrofit 407C all the time and by experience they don’t like 407C. Stick R22 to be safe
Yeah i think 1-2 years old. I think the 3D scrolls do worse with 400 series. Refrigerant like 407 or 422b
Worked good.
Nor-Cal Refrigeration & H.V.A.C yes sir.
WHAT S LB 440?.WE USE KG .
Hey Ulises should teach your helper not to stand under the load "never" and if ever does pull him up with that hoist and spin his ass around like a piñata ..jk 😊😁 good video bro...
Man!! that helper need more practique
I just did a video with the same hoist hey great minds.....lol
Joe Shearer lol I just came across it. Very true. Comes in handy. Especially with us that have not so great backs.