Brand New Range Rover Sport - Wash, Polish & Ceramic Coating ASMR
Вставка
- Опубліковано 2 жов 2024
- In this video, I take you through the full process of perfecting and protecting the paint on a brand-new Range Rover Sport! I start with a deep exterior clean, followed by decontaminating the paint, and finish with a full paint polish to remove even the finest imperfections. To ensure long-lasting protection, I apply a premium ceramic coating, leaving the Range Rover’s paint with a flawless, high-gloss finish.
Make sure to subscribe to my channel, leave a comment, and follow me on Instagram @XtremeAutoDetail for more high-end detailing content!
PRODUCTS:
PRE-WASH: Autosmart
SHAMPOO: Autosmart
IRON REMOVER: Autosmart
CLAY BAR: www.waxit.com.....
PADS: www.waxit.com.....
CERAMIC COATING: iglcoatings.co...
Compound: www.waxit.com.....
MICROFIBER: autofiber.com.au
► FOLLOW US!
Instagram: Xtremeautodetail
Facebook: Xtreme Auto Detail
#cardetailing #autodetailing #detailing
hi, I’m wondering what dilution ratio you use in the foam cannon?
@@andreas3727 100ml of snow foam for 900ml of water
Hey nice vidéo 😉👍
Nice job mate. IGL coating?
@@rooboy99 thanks mate, yea IGL coatings 🙂
Add "ASMR" to the title of this video.
@@mrplay4874 done ✅ 🙂
And what foam cannon do you use?
@@andreas3727 from bigboi, same brand than my washer pressure
Nice video love your setup 💯
@@UnknownPerson-oh1px thank you,
I ordered lights and floor so soon it will be better.
The shop is new 🙂
Great job keep going, i wanaa to advise u to try nasiol or onyx ceramic coatings 🔥
I am with IGL COATINGS, I can't change like that haha
Was that 7:30 AM to 8:30 pm?
@@DBLG65 from the start to the end on the job.
Wash, decontamination, polish, ceramic 2 layers
Love it!! Your work shop is amazing. What did you use to make the wash bay? Also how cheap are the temu clay bars😂
@@shawnybdmc I bought the wash bay online.
The clay bar is ok, it does the job but I’m not a bit fan. Haha
@@Greg_the_detailer hey Greg, was just wondering. With your mobile setup, do you have a generator to power the Bigboi? If so, which one do you use? I’m looking at getting a generator, but unsure which one to get. Bigboi recommend 4000watt minimum.
@@shawnybdmc hey,
No I don’t have, when I do a client I use his power mate.
I never needed one so no point to spend money on and it takes so much space and it’s noisy..
@@Greg_the_detailer ah ok. I live rurally and service a lot of farmers. Fortunately I’ve been lucky enough to always have a power supply. But there’s going to be a time where there’s no power and I just want to be prepped.
Much appreciated brother.
@@shawnybdmc “I understand, I thought the same thing, but it’s going to cost you a lot of money and space for maybe 1 or 2 jobs once in a while, no?
Or maybe it could be a good idea as well, since you can tell them you can detail their car anywhere.”
Great job Greg
@@aaal6462 thank you ☺️
You didn’t pre rinse the wheels before contact wash. Bad practice 😮
@@darrenwootton2007 the car is brand new, it wasn’t even dirty. And this kind of wheel are the best, I would have pre rinse if it was black glossy for exemple, but in this one in this condition zero point of doing it 🙂
A dirty wheel even with a pre rinse is worse than doing no pre rinse on brand new wheels
What soap do you use in the foam cannon?
@@andreas3727 Autosmart snow foam
Why the air pressure on the pad with ceramic on it in the beginning?
@@pipolebnene To make sure the pad is clean. A year ago, there was debris on the pad, and I lightly scratched the black paint on the bonnet. I had to repolish and reapply the ceramic coating again 😅
@@Greg_the_detailer ok i thought this at first but to me this would have made more sense before pouring the ceramic on the pad but thanks for the answer
@@pipolebnene I do before and after most of the time..
sometimes when you use the ceramic bottle for the second time, the ceramic can crystallise on the bottle so when you put the ceramic on the pad you may get some crystal ceramic and then you scratch the paint…
I do this to keep it safe 🙂