Tell them the truth, they should buy DC voltage supply and a rosin paste. This one you're doing is stressful. You too need to have it. Soldering paste is not precise but you are doing a great job so keep it up
Fada Joe, this seems confusing. In one of your videos, you said engineers should put the positive probe of their multimeter to the ground (on the SIM card cover) and the negative of the probe to the positive terminal of the battery connector of the phone to know if there is a charging connection. But in this video, reverse is the case. Could you please explain that for us. Thanks for the good job..
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@eightelms In the first video, he used the multimeter to conduct a continuity test from the panel ground (SIM card case) to battery positive and later, the battery negative. On this video, he's sending 5v to the panel, hence, positive wire goes to Vbatt and negative goes to GND.
Boss good please thanks for the update always please having issues with one of my clients please X655 consuming battery and generating heat please how can I identify the damage ic
1 What Rate will my multimeter show me if a capacitor is consuming power 2. If assuming i tested the battery terminal and it shows its been blocked what should i do immediately then.
Hi @fatherjoe my name is Engr Omar from Abuja,Nigeria..... May god almighty bless your good work, i actually have an issue i have a phone from a customer which happens to enter water and i've done service and heating to it but then also the screen is broken and i bought a new one to fix it is 24Leg big and the model of the phone is H-mobile T10. After trying to put the new screen they keep showing white display please how can i solve that problem?
Tell them the truth, they should buy DC voltage supply and a rosin paste. This one you're doing is stressful. You too need to have it. Soldering paste is not precise but you are doing a great job so keep it up
Pls fada joe, why do you connect USB cable to the charge head while the battery is intact?
Yes, I understand the importance of having the right tools for the job. Thanks
THANKS a lot, Father Joe
Thnx alot sir. But how can we apply that knowledge on smartphones ???
After component removal to we replace with the other or we do jumping
Good job Sir
Can it be observed manually by with your body and secondly can be with battery alone without connecting to vbat and gnd
I recommend you connect to vbat
Do you need to replace the capacitor to another one and is it only when you connect the cord and the battery that it's going to show white
You're are the best.👍
What of the button phone that swallow batteries.
What is the solution?
Alright, pls for more explanation pls dm us on whatsapp
Father i recommend rosin atomizer instead of soldering flux anyway thanks for great video
Fada Joe, this seems confusing. In one of your videos, you said engineers should put the positive probe of their multimeter to the ground (on the SIM card cover) and the negative of the probe to the positive terminal of the battery connector of the phone to know if there is a charging connection. But in this video, reverse is the case. Could you please explain that for us. Thanks for the good job..
Video coming soon
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@FatherJoePhoneRepairs Father Joe, please reconcile this for me because I don't know which one to follow! The previous one or this method? Please tell me.
@@eightelms
In the first video, he used the multimeter to conduct a continuity test from the panel ground (SIM card case) to battery positive and later, the battery negative.
On this video, he's sending 5v to the panel, hence, positive wire goes to Vbatt and negative goes to GND.
Understood very well thx
Father Joe pls how could someone flash android phone firmware and will any security plugin remove if the firmware is flash??
It’s simple
Video coming soon
@@FatherJoePhoneRepairs ok I will keep reminding you to upload the video may God bless you for the knowledge you are passing
Nice job
Thank you so much ❤️
Good bless you sir
Amen 🙏
Father Joe is it normal to apply 5 volts when to battery is connected and can't affect the battery 🔋🔋🔋 life
Excellent
Thank you so much
❤ wow engineer that good but why the capacitor is not going to be replaced?
What ic and diodes can consume batteries
Sir Boss I want to ask you a question
what could be the fault of B1G charging but not onning
Is it possible to remove a resistor in a phone and the phone should still work
Is this method possible if you us usb cable only or we have to put battery in phone
I have a question, itel 5606 power on is damage how can solved this problem?
Video coming soon
Since u have remove the capacitor, does it have a side effect on the phone.
is it possible to change another capacitor or no need
replace it
Is Battey connected on the phone along with the cable you connect ?
Yes
Hi, will it not affect the board since the board is make with 3.7v battery
It will not but be careful
Can you use the procedure in android phone
How did you remove the capacitor
So you will not replace another capacitor back
Very nice
Good of you, what about if the phone on and go off on it's own
Father Joe what will cause the phone to be hot when you are making call and after call the phone will not be hot again
Please sir if I want to use power supply how will I do it?
Use 4.7 voltage
Boss good please thanks for the update always please having issues with one of my clients please X655 consuming battery and generating heat please how can I identify the damage ic
Video coming soon
Very nice but a good dc power supply is the best.
Yes, you are right
But can you remove the capacitor
1 What Rate will my multimeter show me if a capacitor is consuming power
2. If assuming i tested the battery terminal and it shows its been blocked what should i do immediately then.
Why you didn't replace a new resistance
So the phone can still function very well without the capacitor you removed cause you didn't replace the capacitor
Thank you boss
❤️❤️❤️
Please i love ur job how can i locat u, u have allot to do for me
Ok, pls dm us on whatsapp
+234-7058779633
Pls I want to know if there is any machine that can be used to dictate fault aside from multiple meter? what's the name Pls.
kindly dm us on whatsapp
Hi @fatherjoe my name is Engr Omar from Abuja,Nigeria..... May god almighty bless your good work, i actually have an issue i have a phone from a customer which happens to enter water and i've done service and heating to it but then also the screen is broken and i bought a new one to fix it is 24Leg big and the model of the phone is H-mobile T10. After trying to put the new screen they keep showing white display please how can i solve that problem?
ok,pls kindly message us on this whatsapp number +234-7058779633, let see how we can help you
@FatherJoePhoneRepairs okay thank you so much
Thanks Father joe
❤️❤️❤️❤️
Do you replace the capacitor or not
I replaced it
@FatherJoePhoneRepairs that's have polarity
That's have polarity
I think it would work better if that capacitor is replaced back
Yes I replaced it
Father Joe please I want to know the scream will not spoil
Sir pls v charge can also be connected as v batt as u said earlier that they are both positive
Join my channel to see the full tutorial.
The capacitor u removed why not replace it with another one and secondly one of the Base removed during the process of you removing it
Perfect
What if the capacitor is working and the phone still consuming battery ?
But father joe must I use only 5volt cable and charger to connect on the vbat and GND
Sir my own is samhe button phone it is heating when I plug battery please what should I do
kindly dm me on whatsapp
Pls bro how do I fix Infinix smart 2 consuming battery.. it always drain fast after charged full
pls dm us on this whatsapp number +234-7058779633 ,let see how wecan help you
Hi boss father joe please show us how to test very well all components on the panel
I will on my next video
@@FatherJoePhoneRepairswe really need it
Father Joe will it not burn punnel because of increased current?
It will not but be careful
What the point of pix in Android phone
But what about charging error?
Thank you, very good
❤️❤️❤️
Wau, capacitors on pretense mood.
What of T528
pls kindly message us on whatsapp +234-7058779633
The negative of the charger was not conected to it to complete the circuit. Thsts whay i took
Did you apply heat in order to remove the capacitor
No my engineer
I need ur vedio on sim /memory slot tutorial
ok pls kindly dm us on whatsapp
+234-7058779633
Thank you so much
❤️❤️❤️
Hello bro, can you help me with my alcatel tab pixi 7 chargin port damage, please can you help me to jumper this connector charge??
Thanks alot father joe....... What about android. Very important in android phone.
Is still the same process
Can the roop work the same as pest
But the components on Android phone are much so how can one know it
It’s simple to know
You did not explain how to know when is on Android phone. You just said is simple. So explain it.@FatherJoePhoneRepairs
Good morning sir, please some phone doesn't hot but it drain battery 🔋 how do you TREAT such issues
pls simply,dm us on whatsapp
What about phone that is getting hot
Video coming soon
How can I get it done on smart phones
simple,message us on whatsapp to get started +234-7058779633
We didn't replace the component
Where can we get that screen??
pls message us on whatsapp
For this keyboard phones, we have understood. But what about if it's an android phone like Samsung : a13, a12, or a series ....
Alright, kindly dm us on whatsapp
I need the password for frp
Father Joe I need your contact
Check description
Pls I need your contact for more clarity
Ok I will drop soon
We need a whatsup number
It will soon be available
I need u contact
What about Itel 2160 that overheats and drains batterry
ok,here +234-7058779633
Boss
Am a learner pls can I get yo WhatsApp number plsss .. I need a mentor
ok, here is our whatsapp number +234-7058779633 ,you can now message us