How To Replace The Primer Bulb On A Toro Snowblower
Вставка
- Опубліковано 8 січ 2021
- In today's video, I show you how to replace the primer bulb on a Toro CCR 3650 single stage snowblower.
The content in this video might not be applicable to your exact piece of equipment. Any damage or loss to persons or property that may result from use of information contained in this video is the sole responsibility of the user and not Brant Small Engine Repair.
Brant Small Engine Repair encourages the use of safe practices and safety equipment while working on your machines and therefore assumes no responsibility for personal injuries. The information contained in this video shall be used at viewers discretion. - Навчання та стиль
Thanks much - this just wore out on my dad's CCR 3650. Got the part in hand, just needed to know how to fix it. Thank you very much!
Glad I could help Tony. Thanks for watching. Cheers
I have the ccr 2450 and ill be doing this today thx to your great video. Thanks
Glad I could help.
Thank you (and Taryl)!!! Today I found my primer bulb detached on the first use of my Toro 3650 this winter season with 4 inches outside. Dang it! I really shouldn't be complaining being that this will be the first repair done on my 20 year old Toro 3650. I've ordered the replacement part and your video will be helpful with the repair.
Glad to help. Thanks for watching and taking the time to leave a comment. Cheers
FYI. It wasn't necessary to remove the front panel. After removing the prime line from the primer bulb, you simply squeeze the two clips on the primer bulb and pry up on the white base of the primer bulb and the entire assembly comes out. Easy peasy. I also found a five pack of the primer bulb fully assembled on the base on Amazon for $9.
perfect timing of your video. mine just broke. this was helpful, thanks.
Glad I could help Rick. Thanks for watching
Just found this! Looks so easy. Will get on it before our next snow. I've been cheating all this time. I saw a video where the guy sprayed some carb/choke cleaner in the hole and it fired right up! Worked for me as well..first pull!! Thanks, time to do it right now.
These primer bulbs are the weak point of this machine. It's a beast otherwise. Thanks for watching and hope your replacement goes smoothly. Cheers
@@brantsmallenginerepairs I think they sell the white primer part as well with the bulb.
@@Zibby2 they definitely do. It's more money so I just try to replace needed parts to keep the costs done for my customers. Thanks for watching. Cheers
Ok
Thank you! Worked great. Change spark plug while I was at it!😊
Glad I could help and congrats on fixing your machine. Cheers
Awesome tutorial - kudos!
Glad I could help George
Changed mine in 30 seconds with a new primer assembly (white and black piece together) simply by gently prying out the old, pulling off the hose, reconnecting and pushing it back in.
Glad to hear. Thanks for watching and taking the time to leave a comment. Cheers
Brant what perfect timing here!! Now my primer bulb broke on my CCR 3650 probably with the very sub zero temps of sitting in the garage. I have not gotten the clutch spring on yet because its just way too cold to be working in the garage (but I have it here). I also ordered the screw that I have here for the cable clamp too. I just ordered a new primer bulb a few mins ago on Ebay and while I was at it ordered a new spark plug, I figured if I had the cover off might as well get the spark plug while I'm in there anyways, and not sure how old it is as it was in the machine when I bought it. We got snow today, and I did get it started, without priming it but it took plenty of pulls to get it started. I am from Chicago and I figured after this sub-zero stuff ends and I may end up using the machine once or twice more (most snow here is little just to shovel) and then I can atleast do the spring, the primer bulb and the spark plug when it is a decent temperature outside. Atleast I can still use it just to get by to the end of the season, I just used it earlier without the clutch spring but kept the handle engaged the whole time.
Glad the video was helpful. Good thinking with the spark plug.
I live in southern Ontario in Canada about an hour from Toronto. Our winters are pretty similar to you guys in Chicago. I only use my machine a handful of times most winters. But sure beats shovelling. Take care.
@@brantsmallenginerepairs LOL Brant you make everything look so easy in the videos, I should just bring the machine over by you with all the parts I ordered!!! LOL! I do like the CCR 3650.
Thanks for the video
You're welcome James. Glad I could help.
Well done. Thanks
Hope it helped or was informative. Thanks for watching and taking the time to leave a comment. Cheers
Thank you very much!
Glad I could help. Thanks for watching. Cheers
This was very helpful. Thanks
I'm glad it helped. Thanks for watching. Cheers
Thank you! I totally forgot I cracked mine at the end of the snow season and was wondering if I was going to have to send it in. Found a primer bulb kit (bulb mounted on the base, hole line, and filter) on Amazon for $10!
Congrats on fixing your machine. Glad I could help. Cheers
Nice
Glad you enjoyed it. Thanks for watching and taking the time to leave a comment. Cheers
Thanks I’m replacing one tomorrow
Good luck with your repair. Hope this helped. Take care
@@brantsmallenginerepairs
Running perfect with your help thank u
@@robertjames6255 glad I could help. Happy blowing
Very ez fix, drained the gas, fresh spark plug
40$ snowblower 13.00 in parts total with an extra spark plug
I’m very grateful I found your channel
@@robertjames6255 nice find. Love it when I can get stuff cheap and can get it fixed up and back in service.
Hot water. I was scratchig my head, no way that was going to fit. Thanks
Glad I could help. Thanks for watching and taking the time to leave a comment. Cheers
All you need to do is shoot some canned air into the primer hole. Can also use starter fluid, carb cleaner etc, as long as the straw fits in the primer hole.
That might work but the video is for people who want to replace the primer bulb. Thanks for the tip though. Cheers
@@brantsmallenginerepairs Thanks, just a quick tip if you need to get it running and do not have the new bulb, I have used it and it works.
@@4tsixer I'm sure everyone appreciates any tips. This is a learning community after all. Thanks again. Cheers
I can not get the white clip back in. 🤦🏼♂️
You can't get the black rubber piece on the white base or you can't get the whole thing to clip into the snowblower?
@@brantsmallenginerepairs its cool, I finally got it. I bought a new plastic piece with the rubber on it. I finally ran it under some water and it locked right in. Thank you for a great video!
@@larrytabor2099 Appreciate the kind words. Good job getting yours fixed up. Take care
Worthless....where does the other end of the primer hose go?
Worthless. Really???? It connects to the carburetor.