Chainsaw not oiling, check this first. Easy fix.

Check the simple stuff first. This chainsaw would not oil and its a common problem and an easy fix.
Chainsaw not oiling, check this first.

[@daveherrin2701]

Son!!! Finally a video for my problem. Plain and simple. Fixed it! Me! Amazing.

[@TheRustyRooster]

Glad it helped! Woo-Hoo

[@rgrea2]

Me too, I like it simple and it worked perfectly. Saw sits there for 2 years and all the junk he showed in video was all it took Thank You SIR

[@TheRustyRooster]

Glad it helped out

[@aeinn5189]

So closed to send to the shop, if not my money get robbed already. Thanks for the video. Really helpful.

[@TheRustyRooster]

Glad it helped!

[@BrucesShop]

Thanks Rusty i am doing an old Pioneer 500 that isn't oiling i will let you now how I make out. I has a worm grad oiler.

[@TheRustyRooster]

Heck yeah I'm sure looking forward to that

[@groundskeeper5292]

Thanks my echo wasn't oiling. I'll do all that. Love how you painted some lines on that box. Good fix. Subscribed!

[@TheRustyRooster]

Thanks ol-buddy I do like it when they sling that oil

[@trailcamerasinnewengland0112]

Another great video. I’m learning more tricks from y’all then I did when I took the OPE classes.

[@TheRustyRooster]

Good to hear!

[@dennislarimore9409]

Thanks for your time on this video. Much appreciated.👍

[@TheRustyRooster]

I appreciate you watching

[@davidfarrar3666]

Maybe you can help me. I have a 445 that is not oiling the bar. I have replaced everything pertaining to the pump and the oil screen inside the sump is clean. There is no adjustment for oil feed on this model. I pressurized the oil sump and it blows out where the oil tube goes free and clear. The bar oil holes are clean as is the chain guide around the bar. From what I gathered the oil sump is not vented BUT my only clue is that with the oil pump assembly completely removed, and the saw laying oil pump/clutch side down on the bench, no oil flows out of the hole where the oil hose goes - until I open the oil fill cap on top at which time it flows freely out the bottom side. My only other clue is something called a duckbill, could this be the problem?

[@TheRustyRooster]

The "duck bill " acts as a vent .. could be the issue 🤔

[@skhetan1]

Thanks man oil port on bar was clogged … now the aul comin out good 😁😁

[@TheRustyRooster]

Glad it helped

[@ivaerak]

My oil filter for chain oil supply line is clogged. How do I clean it? I have succesfully isolated the filter from the chainsaw, but what is the best way to clean it? Water and soap or thinner?

[@TheRustyRooster]

I'd suggest replacing it with a new one but if cleaning is your only option remove and clean with solvent / gas and blow out with air.

[@ivaerak]

@@TheRustyRooster thank you kindly for fast response!

[@mikelewis5152]

Very helpful. Mine is a Stihl MS 29 if I leave oil in the reservoir my case has oil in the bottom . What you think?

[@TheRustyRooster]

When done remove the oil cap to allow pressure to release reinstall and check if it still leakes

[@alkoweski3765]

This guy is a national treasure

[@TheRustyRooster]

Hey Hey Thanks a bunch ol buddy

[@melissatuason2395]

Husqavarna 395xp is there an oiler adjustment to have more oil on the bar ?

[@TheRustyRooster]

I believe the adjustment is on the bottom side of that model saw. Look it up on a parts breakdown to be sure

[@joelalleman9591]

thanks for the great tips on the oiling issue !! I'll check my saw out for this issue , sounds about right !!

[@TheRustyRooster]

hope it helped

[@KensSmallEngineRepair]

Great Vid Rooster! Does that guy run it with No Brake???

[@TheRustyRooster]

Itc been a while since I worked on this, belive the brake was in good order

[@stevep1794]

I saw this vid on tuesday and by today i revisited this and no shit…worked!!

[@TheRustyRooster]

Glad it worked put for you . It's not always the problem but it's the first thing I always check.

[@tomsawer8696]

Fixin Kentucky way - easy first. :) Thanks for sharing.

[@TheRustyRooster]

Thanks for watching!

[@BibbidiBobbidiBoo2023]

You’re funny! Thanks for the video.

[@TheRustyRooster]

Hey hey thanks for watching

[@montehawver8834]

To the point. Love it. Great info. Thanks much.

[@TheRustyRooster]

Glad it was helpful!

[@bouldernelsonbigfoot]

Great Video.

[@DOCREAL1118]

Great video! Thanks for the tips. You saved me some cash this winter. Doing my own saw clean up this winter. WOO HOO 🇺🇸👊

[@TheRustyRooster]

Good deal glad it helped

[@JCO2002]

Subtitles helped a lot. Could barely understand a word he was saying.

[@TheRustyRooster]

Sorry about that... have upgraded the microphone since this video.

[@JCO2002]

@@TheRustyRooster Actually, it was the accent. It was helpful, anyway, thanks.

[@TheRustyRooster]

@JCO2002 lol sorry ol-buddy I can't fix that 😅

[@bestillandknowthatuaregod]

does stihl chainsaw ms290 has an adjustable oiler?

[@TheRustyRooster]

Yes on the bottom of the saw you will find an adjustment screw

[@fxpestoperator5527]

AWESOME video Brotha!!!!!!!!!!!!!!!!

[@TheRustyRooster]

Appreciate it!!

[@TheUltimate65]

Easy when the oilpump its located then , its more job when the pump its located in the underside of the cylinder , like the are on older jonsred 😊

[@TheRustyRooster]

Ain't that the truth

[@mitchcoop1]

Thanks for tips... Ya kinda talk funny though...Sound like Jr. Johnson.

[@TheRustyRooster]

Hey hey sure hope this helps our with your saw. By the way I met Jr. Johnson 1984 Atlanta motor speedway

[@zachr.4711]

Great vid. Very informative

[@TheRustyRooster]

Thanks, hope it helped out

[@_ckr]

Thank you Sir!

[@TheRustyRooster]

Sure thing hope it helped

[@happydays454]

That time again is there better oiling chain

[@TheRustyRooster]

Not that I'm aware of.

[@Staygoldfarms]

Thank you for the informative video.

[@TheRustyRooster]

Thanks really appreciate that

[@alaskalograft]

4 am here in Alaska n thinking bout my no oil bar. I'll try this tomorrow. Bet it works. THANKS Rooster! BTW, you any relation to Rooster Cogburn? 😃 zzzzzzzz

[@TheRustyRooster]

Hope its this simple alot of them are. No relation with Rooster Coburn but do have his picture on my wall. Good luck with your saw.

[@cornfedlife]

Thanks brother!

[@TheRustyRooster]

👍🐓

[@racerlee6580]

Thanks man great tip

[@TheRustyRooster]

Happy to help

[@chrisedward7659]

Good deal Bill!👍😀

[@TheRustyRooster]

Yeah buddy...

[@MrFlockhammer]

Thanks for the Video! Could not for the life of me figure out where the oiler tube went to on my saw.

[@TheRustyRooster]

Thanks so much glad it helped 😊

[@730ROME]

Helped a ton. Thank you good sir

[@TheRustyRooster]

Sure thing glad you found it helpful

[@edwarddenhof8624]

Thanks

[@TheRustyRooster]

Hey hey fella, hope it helped. It's not always the pump and lines. This is what I find most often when folks tell me it stopped oiling

[@joeeliff4233]

THANKYOU"😊

[@TheRustyRooster]

Anytime, thanks for watching

[@jeffkirk9529]

good stuff man thx !

[@TheRustyRooster]

Thank you sir

[@dougie-thugie]

thanks big pimping

[@TheRustyRooster]

Any time

[@lisa9111]

Good info. Thank you!

[@TheRustyRooster]

Glad you enjoyed it

[@TheNovaJohn]

Nize,,,,,,,I cant help myself, I take a hose to them when they are baaaad,,& when the hose aint froze

[@TheRustyRooster]

Heck yeah, hate working on a nasty saw

[@Ludmila2508]

Good chain oil

[@TheRustyRooster]

Sure is

[@Bwkhatongthokbchinnel]

Please help me Sthil guide bar not oil tig

[@TheRustyRooster]

If cleaning the ports don't take care of it check the lines and pump

[@arkbak1333]

Nice

[@TheRustyRooster]

Thanks

[@badbehavior1883]

Short and sweet is the best.

[@TheRustyRooster]

Yes it is , thanks for watching. Have a great new year

[@gravelyman]

I see that happen alot. Good one my friend 👍

[@TheRustyRooster]

Thanks Gravelyman 56

[@allenwadecook4806]

Thank you. I understood perfect. I sub to you.

[@TheRustyRooster]

Thanks a bunch I appreciate it. Hope it helped

[@jameshaliday1929]

USE FILE OR DRILL CHAMFER OPENING FOR OIL ON THE CHAINSAW BAR, or forgett chainsaws use a Excavator,.

[@TheRustyRooster]

All for using an excavator 👍🏻

[@marvinkmooney7744]

NICE

[@TheRustyRooster]

Thanks for watching

[@Lovinflyindrones2022]

Nice video Rooster

[@TheRustyRooster]

Glad you enjoyed it

[@joeo1352]

Nice fix 👍

[@TheRustyRooster]

Hey, thanks Joe

[@rodneygunderson3043]

Darn after checking all that, it is the oiler

[@TheRustyRooster]

I always check this first, unfortunately it's not always the issue.

[@allanlugo8095]

I will look at it tomorrow thanks

[@TheRustyRooster]

Hope it works out for you

[@allanlugo8095]

@@TheRustyRooster just started. Oil coming from the saw. But blade was clogged....should the edge of the bar. Be razor sharp? Or should I get another bar...chain keeps slipping off?

[@TheRustyRooster]

@@allanlugo8095 sounds like the bar is wore out, replace it...

[@TheRustyRooster]

Bar should not be sharp

[@TheRustyRooster]

@@allanlugo8095 I'd replace bar and chain together

[@Lovinflyindrones2022]

Good info R R

[@TheRustyRooster]

Thanks 👍

[@joematus410]

Love you

[@TheRustyRooster]

Thanks for watching Joe

[@interactive1178]

😂👍👍

[@TheRustyRooster]

thanks a bunch

[@zoltantolgyesi3891]

Common sense

[@TheRustyRooster]

Yes exactly.