Це відео не доступне.
Перепрошуємо.
DJI RS2 vs Zhiyun Crane 2S Stability : Clear Winner? // Mathematic Test with Sample Footage
Вставка
- Опубліковано 18 сер 2024
- DJI Ronin S2 (RS 2) has a payload of 10 lbs. Zhiyun Crane 2S has an unknown payload but has a list of recommended camera setups. This is the ultimate objective gimbal stability comparison test.
🚚Crane 2S from Zhiyun Global Store (to get additional 5% off, use coupon code: s-e-park ): fxo.co/1282115...
🚚DJI Ronin S2 (RS2) from Amazon: amzn.to/2Vj64XF
🎵 Music from this video are from Artlist. Try it FREE for 2 months with my affiliate link: urlgeni.us/sep...
(Hi! Just a quick disclaimer - letting you know the purchase links above are affiliate links. Which means it does not cost any extra amount if you purchase through these links, but I do get a small commission).
🔴Subscribe to my channel here so you don’t miss any future videos: www.youtube.co...
I was guessing on the Crane 2S to get better results and I was right! Zhiyun is killing it when it comes to gimbals. DJI kills it when it comes to drones.
Haha yeh RS2 was not an easy gimbal to beat. Good for them! Hope Sony brings that drone to life to give DJI some competition.
Dji copies freefly and sells it for cheap TBH 😂
@@kritik9.0t dude DJI copied everyone on this one, but just like Apple, they copy but they refined the heck out of it and poured money into marketing. Just like iPhones, it sells. LOL
and again: the most scientific gimbal test ever! Awesome video!
Thanks man! Congrats on your 1k! Keep going dude! 💪
Oh yeahh!! This was the video i was waiting for!
Haha Lucas, this was the comment I was waiting for. You were first! LOL Thanks dude!
This is a brilliant test and appreciate all the time and effort you put into this. As someone who did scientific tests all through university, this was appreciated. Especially doing it 4 times to gather more data sets.
I was a bout to return Crane 2S and try DJI but after watching this super helpful video I decided to keep it. Thanks!
This is a stunning level of work! I owned the very original crane and still convinced it was the smoothest gimbal I’ve owned.
haha thanks Stephen! There are gimbals, and then there are Cranes. LOL
Whaaaaaaa dude, not what I expected but I'm happy i won the 2S. You're the man! Thank you for all the hard work.
Haha you deserve it dude. You walk in rougher terrains than I do! Thanks for watching dude!
You just destroyed standards for gimbal tests everywhere.... good job!!!!!
Haha thanks Johnnie. I now have a big responsibility. LOL
Omg I need this test with the Moza Air 2S added! Great video👌🏽
Thanks Si - I was trying to decide between these two. It seems the Crane came out your best choice 👍
Gracias Mark! 😁 If the smoothness of a gimbal is most important, yes Crane 2S hands down!
This scientific test is insane!!
This is the video that I have been waiting for. really nice
Thanks for that!🙏🙏🙏
Mr Park, you are doing a great job. Thank you for bringing something totally new to the masses and even if i have almost only DJI products in my arsenal, I do enjoy the comparisons between DJI and some other manufacturers like Zhiyun. In fact you are the reason that now, finnaly I have a Zhyiun product : the Crame M3 Thank you and once again keep up the good work.
Hi Daniel, that is so great to hear! Bringing something totally new to the masses is my UA-cam goal! Really appreciate this comment. I do like all gimbal brands. They each bring their own innovations and make each other better - like the M3. 😁🙏🙏🙏
Dude your awesome another crazy gimbal test! Nice job bro!
Haha thanks Paul. Yeh I can’t believe I drove that far to make one UA-cam video. Could have driven to Florida! 😂
@@SePark always welcome!! And you would have your own room so you wouldn’t have to worry about loud snoring man 🤣🤣
@@PaulFeinberg haha dude I'm ready for 2021! Also I lost most of my hearing from filming weddings...
One of the reasons why I switched from Dji to Zhiyun. I had issues with the Ronin S no matter how well it is balanced the footage seems to be a bit jittery in any modes. Right now I am still using the crane 2 and the footage I always get are so buttery smooth. I hope sometime I can finally switch to the Crane 2S. Great video btw!
Thanks man! Crane 2S is here to stay! You’ll probably get a really good sale deal when you are ready.
Thank you for your efforts 🥰🥰
This is impressive ! never seen anything like it...Thanks. subbed
Wow, the Crane 2S crushed RS2.
Haha I have been looking for adjectives for this. “Crushed”. That’s one! Thanks Niko!
Excellent work - great job - thank so you so much for doing this - very impressive
Hey thanks David! I really appreciate that! I try hard most of the times. :)
that was awesome man can't believe you actually took the time to do all this!! so clearly zhiyun wins when it comes to stabilise could you make a review or comparison in terms of functionality and features of the two thanks a lot!
Thanks Adnrea! I appreciate that. Just in case I don't get to make a detailed comparison, I can tell you that RS2 is very sensitive to zoom lens and changing weights. Touch screen is helpful, but not as responsive and accurate as I like for run and gun shoots. Also if you have the Raveneye and zoom motor, the battery drains very fast. During a wedding shoot, the gimbal only lasted 5 hours. Those are the things you probably won't find on UA-cam already. There are lot of videos about features but not many of them talking about the compromises. Hope that helps!
@@SePark awesome thanks for your thoughts!
If only setting up the Crane 2S is as easy as with the RS2!
Haha that would up the game quiet a bit. We'll see how Zhiyun responds to the RS2. DJI RS2 really pushed the design far. In the end we all benefit from this competition. Good times! 👍😁
Great Job! Excellent review.
felicidades sigue haciendo vídeos así de bien planeados, fue muy analítico y fácil de entender.
Great work! Thanks so much..
Interesting yet almost all of your reviews are about Zhiyun tech...
Hey Joshua! I actually like this comment. Now you understand why I had to work very hard to come up with this mathematic gimbal comparison test instead of just stating one Zhiyun gimbal is smoother than the other.
@@SePark brilliant answer... some ninja skills there!!!. Thank you so much for this objective comparisson.
Hoding with my Crane 2S. When DJI RS2 released, I said I want to replace my Crane 2S. After watching this video, I'm gonna stay with my Crane 2S. lol
Haha Jackie, I had no idea how this was gonna go down. Glad I put them together in this test! 🤜💪 Yeh I’m keeping my Crane 2S too! 😂
Great test and sand is the hardest to walk smooth on without the bopping.
nice review..now i know what to buy.. thanks
Amazing work!
This was a really cool test. I'm getting close to buying my first interchangeable lens camera and was looking to buy a gimbal as well. I was pretty set on the RS2 because of the Raveneye, but this test makes me pause a little. Time for me to watch more reveiws!!!
Thanks so much! They both have their advantages and disadvantages. If you interchangeable lens camera is going to be Sony, then I do want to remind people that Sony cameras do not let you preview the shot on the LCD while HDMI cable is connected to a monitor (basically the RS2 mini screen). Kinda defeats the cool feature of the RS2 and instead becomes cumbersome. Crane 2S has some drawbacks also. I have two videos about it ;)
@@SePark it IS going to be a Sony.
@@TheGeocab I'm glad you commented even more then. LOL. So basically if you want to preview your shot while Raveneye is connected, your preview will end up coming through the tiny screen on the RS2, which you can't really see to check your shot. You have to disconnect the HDMI cable each time. It's not really DJI's fault. Just one of the Sony thing. Crane 2S does have the Image Transmission module package, but it requires you to connect it via an app to have lot of the functions.
i like this!! keep it up!!
Great video, thank you! Well executed and insightful
Hey Danny, thanks man! To answer your other question, for a6600 Weebill S is a better fit. You would only consider Crane 2S if you want to scale up to a full frame camera in the near future. As for RSC2 vs Weebill S, I made a similar comparison 2 videos before this one, but it will come down to your budget. Both will handle a6600 easily. Hope this helps along with my RSC2 vs Weebill S video.
@@SePark Thanks Se! Budget isn't an issue and feature wise as well, how do you choose between the two? Or is there a clear answer here? Does the more expensive one (DJI) win here? Not many comparison videos between the two so I'm stuck, thanks so much!
@@itsdannyftw if the budget is not in consideration at all, it will just come down to - answering are you okay with built in battery? are you okay with only having 3 modes at a time? (excluding flash light mode - so for example on RSC2 you can have PF, POV, and PTF on the "M" button. If you need to recall any other mode, you have to go back and program it. Where as Weebill S has access to all gimbal modes via 3 buttons). If the answer is "yes" to both, RSC2 is your choice. Also this isn't enough to make or break the decision, but the "underslung mode" is superior on Weebill S. That fold up mode in RSC2 looks cool, but not really practical since it takes forever to fold back. If you don't care much about doing the underslung mode, we're back at RSC2!
@@SePark Thank you. That is really helpful and good points. Underslung mode is definitely way more quicker. If I was thinking of getting a full frame camera in future, would you say getting both the Weebil + Crane 2S is overkill? Because at the same time I want something nimble /light for travelling or vlogs, and not sure if you'd get tired of the 2S after a day trip. What are your thoughts? Thanks so much again!
@@itsdannyftw hey Danny, your message got cut off. I think you were asking if you plan on getting a full frame camera Crane 2S or RS2 is a consideration? Answer is yes especially if you like zoom lenses. Crane 2S does better with the zoom lens. RS2 has a better image transmitter. Haha I know! So many things to consider.
The biggest different is Crane 2s uses 90° Yaw axis but RS2 uses 45° (i think so) for more ez to watch monitor, so crane 2s is more stable. Why dont you take out extended-Yaw axis on crane 2s, then do this test again. And DJI recommended Super Smooth mode need Strap and lens support
Great job ! Keep these excellent videos coming !! btw -- how do you think the 2s might compare to the Weebill 2 (in this type of test) ?
Cool comparison! But one factor that determines the smoothness of the DJI gimbals is the calibration. I always find I have to increase the motor strength a little after calibration as it's not tight enough for my liking. I wonder if you had calibrated and increased motor strength on the RS2 how they would compare.
Thanks man. Zhiyun auto tune calibration is also very conservative. RS2 “super smooth mode” and Crane 2S “high motor” setting is probably the closest thing to a practical upper motor strength comparison. But you’re right, both of these gimbals have some head room in motor power. If I increased one, I would have to do the same for the other.
After getting tired of Ronin M handles breaking and using the stands, I switched to MOZA. Originally bought the Aircross because it was stupid cheap, I had no idea what I was buying and just got it as a backup gimbal while I tried new things out and to my surprise it worked great.
Bought an Air 2 soon after. Bought an Air 2S last week.
It feels great but I’m wondering how it would compare in a test like this. Would love to see you test the MOZA air 2s this way.
I would like yo see the 2s without te extension arm.
But... butt...! Who will stabilize.... your pants!?!? 😱😳🤔🤣😅😱 Zhiyun needs to make a belt stabilizer for those tikthot shaking moves LMAO!!!! Another 🔥🔥🔥 video brotha!!
Haha, I must have lost weight towards the end of the test just by lifting these gimbals. LOL. Thanks for watching until the end!
Thanks for review
Thanks for watching! 🙏🤜
What a arm workout LOL. Great analysis Se!
I do these tests for GAINZ! LOL. Thanks Jacky!
@@SePark 😂😂😂
Great job Se! wonderful comparison! very mathematical and precise :D your arms and back must be ripped by now! :D
Haha Matty thanks, I did quit my gym membership in 2020. I might not need it again... LOL.
Dear @@SePark what are you thin about your body-weightpoint: is it possible that while are you right handed, you could do more stabilised work with a two-handed instrument on your right side than your left? Because it's much more concise and the osciliation should be less there.
If it's possible, could you repeat the "test" by changing the sides?
@@GirizdL good point. I would consider doing it again if the gimbal on the right side won, but in this case RS2 was on the right side and lost. For my next tests though I should switch it around. Thanks for the advice! 🙏
The only smooth DJI gimbal in my experience was the Ronin-M, which I still have for anything big or heavy like 7-9 lbs. The Crane 2 was very smooth and forgiving; the Crane V2 and the Weebil S were so and so.
This is accurate. I remember Ronin M! I loved it minus the stand. LOL. Crane 2S is like Crane 2 who worked out on steroids.
Hey i was thinking of buying gimbal for Fujifilm xt3, i saw the compatibility list, how can i adjust focous on this gimbal, do i need to buy follow focous motor?
Lol “ my pants coming down” 😂
Haha my dude is the real one! 😆 Watched it until the end! Thanks bro! 🤜
SO GREAT!!!
Hey Michael! Thanks so much!
interesting!!! what a coincidence, i just started learning some statistics and complex operations in MS-Excel for data science programming and in the middle of all that i come across this video and everything you are doing makes sense to me which normally wouldn't (i mean seriously-- look at the huge chart and all those numbers -- it's ridiculous for a common man🤣). so, it's official: i am a nerdy geek and i love it! 😎💻📷
Haha what a perfect timing then Asif! I'm a huge nerd at heart! Spreadsheets and making gadgets make me happy! 😁
Erich one is lighter, which app is better, which Batterie die first. How long to recharge.
honestly I think it has a bit to do with the gimbal design. As much as its great having full view of the camera lcd having gimbal arms/axis that aren't perpindicular to each other I think would have a negative outcome on stability. I have never been a fan of the horizontal axis setup on the ronin s
Hey Jeremy I think so too. The roll motor algorithm somehow has a harder time making the gimbal stable. That's why the original Crane was much more stable than the Weebill Lab. Thank goodness for the flip out screen with my Crane 2S tho... LOL
Do you know if the stabilization provided by the Sony A&sii including the IBIS and Active Stabilization is additive to the stabilization provided by gimbals like the DJI RSC2 or RS2 ? Thank you.
Nice test, however the results would be more determining if you had duplicated the tests switching the gimbals side to side. Most people do not have identical strength in both arms. Is one arm inducing more jitter than the other? Having results with your custom rig from both sides could answer that. Owning both Zhiyun and DJI gimbals I was glad to see the test, thank you.
Thank you! That’s actually a great advice. This is why this test gets better each video. Definitely going to incorporate that! I may also make the rig wider and try to center the gimbals towards the middle more. They are inches apart at the camera center of gravity but I could get maybe 2 inches closer. Thanks for the comment!
Is it just me or is the handle of the RS2 being very wobbly at 2:33? I might be wrong but I suspect the gimbals being connected to the rig at a single point at the bottom (of such a large wooden frame) leaves them open for more cascading frequencies than you'd get holding the gimbal with your hands. In that case a few centimeters difference in size and center of mass of the gimbal, would lead to various cascading frequencies causing one to wobble more than the other. The best way to remove that wobble would probably be tying the top of the handles of the gimbals to the side frames (left and right side) with plastic ties or something that would reduce the bounce.
Oh that's the footage of gimbal auto calibration. DJI gimbals shakes the camera to sense the weight balance. However, how did you know that was one of the things I wanted to improve on this rig? I actually felt that Crane 2S wobbled a little more than the RS2 during this test because Crane 2S is extremely heavy compared to RS2. Since most gimbals have a 1/4-20 mounts on the side, I'll probably use a magic arm to have one more point of contact. Great suggestion! Thanks!
@@SePark Wood is usually a flexible material with a lot of give. I guess the DJI shake is intentional (haven't bought any gimbal yet, but planning to so thanks for the videos!), but that shake was in my opinion hinting that it didn't have optimal support.
I'm guessing you could force the horizontal beams on this frame to bend 1-2 CM up/down if you put your foot on the bottom and pulled/pushed with a few kilos of force at the top one. If you installed a metal square pipe profile or u-profile over the bottom beam that you connected the bases of the gimbals to, you'd probably reduce the amount of springiness of the wood and the gimbals would have a firmer base... but it wouldn't really change much because it's still standing on one leg. A Magic arm to the side sounds like a solution that will give you 2-3 times as good results.
The next thing that in my opinion would potentially improve your rig after that, would be to find a way to stabilize the Z-Axis of your then stabilized X and Y axes. Then you'd need to add another frame behind the gimbals to hook up behind them. I don't know if the result would be worth the added weight though. X and Y stabilization would be a big improvement on its own.
@@SteinarHusby wow love the way you think! Thanks for all these ideas. I'll definitely keep this in mind. I'll need to either invest in metal welding equipment or start working out even more. I appreciate you being into it as much as I am. :)
Did you compare the crane s2 with weebills? Because I just got the crane2s and it so insane,
Haha congrats on your new gear! Just by filming for one normal clip I could tell Crane 2S was much more powerful and smoother than the Weebill S I didn’t do this test. It’s like in a separate category tho.
Pretty much one of the more scientific tests I've seen!! Thanks! I got a question about the Crane 2s, is there a difference in performance when you use the lower arm in angled mode? I've seen so little people removing the part of the lower arm so that it lets you see the screen. It would be interesting to see if the angled arm has something to do with the performance of the gimbal or not. Thanks again!!
Hey Matias, I personally could not remove the arm because the screw stripped. I have heard however that will make the gimbal slightly less stable. Which makes sense since just for simple roll, both the roll motor and tilt motor has to work together to counter it. I recommend people not remove the extra arm to go 45 degrees. Thanks for watching dude!
@@SePark thank you very much for the answer!
Does anyone think that the issues with the RS2 could be solved with a software update or do you think this is a fundamental hardware difference?
Good question David! To certain extent, it's mostly just raw motor power. Side by side, Crane 2S has a much bigger motor, and both at full motor power, you can feel the torque difference. Yes, if the firmware set the motor more aggressively so when it auto calibrates, it overshoot what is considered normal operation, technically RS2 could close in that gap at 70mm. I don't think they will since over powering a motor results in gimbal vibrating especially during underslung mode. I tried the second RS2 firmware they just released. It's smoothness is about the same, but it did get rid of the constant error message suggesting that I need to calibrate my gimbal again when you zoom the lens.
@@SePark After the upgrade, what is your final choice?
@@SHLEE-yi5li after filming couple weddings with the RS2 and RSC2 my main driver is back to Crane 2S now unless I do my family vlog, which case I stick with Weebill S.
There are quite a few Zhiyun product videos on your channel
Exactly! 😁You know why I had to create this method of test. 🤙 (hopefully you got to watch the origin story of this test)🙏
@@SePark they definitely make a great product! I would not have the patience to do an in depth test like this!👍🏾
nice!! that is impressive!
Thanks Jeff! Lot of behind the scene triple checking calculations. More than my college math finals. :)
Hello ❄️Very good video and vlog 👌Good work my friend 🎄Thank you for sharing☃️
Great test, but you wouldn't shut off IBIS in real life.
Please do the test both identical setup. From camera setup to motor setting at the app. As a control test. Let's see If identical gimbal can score 0% difference. Theoretically, both identical gimbal should score 0% difference as they will react the same using the same algorithm. If identical setup couldn't score 0%, then what's the point of comparing different setup.
Hey Hafiz, haha that's kinda extreme but actually that's a pretty good idea for all my super skeptical viewers. I thought me putting in a identical camera rig setup in a home made cage was extreme enough. This test just keeps getting more expensive! You know I gave my extra Crane 2S away on a giveaway. LOL I do love this idea tho. Thanks man!
My only draw to the rs2 is the tilta ecosystem to be honest.
Not surprising, crane 2s is stronger than RS2... The only reason I got the RS2 is because the raven eye... New generation of gimbal of any top brand is crazy good... So the next thing to consider is extra features that comes with it...
Haha, right! Motor size on the Crane 2S is almost ridiculous as this test. The Raveneye with little video monitor on the gimbal is so next thing. My only thing was hoping DJI will put zoom/focus motor control directly alongside with the image transmission from the phone app so you can see the image while you pull zoom\focus. Haha but yeh, gimbal game all the sudden got exciting.
Bro, in 1 hour I'll be buying a gimbal, but noticed a video where rsc2 is smoother than rs2, do you have data to backup this?
You are the boss
Is there any friemware update to rs2 from then? Or results are still the same...?
Yessiirrr
Make a deep comparison about these gimbal
haha I am working on a deep detail video of RS2. Trying to hit the topics that no other UA-cam videos talk about.
Tomorrow i want to buy gimbal your video confused me
@@Snapit0 haha I'm glad to hear that I have done my job. I'm sure you have done enough research on both gimbals. My video was the last video you needed to see. LOL
Well this is great. But to be just switch sides for the gimbals and do the same run and moves. In case your hanger frame shakes rs2 side more for whatever reason! Ha ha
Okay i got my answer!!! It's Crane 2s
Haha it's gonna be the answer for awhile.
The problem with experiment is that both images looks horribly shaky and both footages is useless, so results within the margin of error. Personaly i willl never buy zhiyun again because i own crane 3 lab and its horrible as on these footages. Previously had ronin s with no such problems with ergonomics etc.
Hey Tim, I respectfully disagree with part of this. The margin of error actually is greater if the gimbals were tested with a ninja walk. The pixel shift difference is smaller, whereas if you push the gimbal towards the motor limit, then the delta between the two is greater. If I just told thousands of people Crane 2S is smoother than the RS2 just by showing you some comparison b-roll footage, some people will call that bias. Nothing wrong with that. I just wanted to provide people different tests for them to decide. Crane 3 Lab on the other hand, yes it had motor power but the algorithm wasn't very good. You could call it rough around the edges and not graceful. So that part I agree. They improved the algorithm tremendously on Crane 2S.
i see what you mean, but you know maybe i'm a hater of zhiyun... I just really disrespect that they release top gimbal and after maybe a half of a year i dont remember they release new gimbal with "new algorithm" but my is still sucks and they hasn't firmware update to this new algorithm previous models... its such a bummer to buy top product to realise that the company give a shit to customers. And even new gimbals have same ergonomic issues as previous that really disturb opportunity to use they products as pro tools. I like new design of crane 3 and 3s but that huge battery holder and grip and same as on 2s battery compartment that i cant detach breaks flexibility and i pushed to use zhiyun products only one way. All of that really makes me despite of better stabilization thinks i will not prefer zhiyun over dji
subed right away
Thanks Danny! Welcome to the channel!
The Se-style gimbal review!
Haha I like that Ty! Se-Ty-Le review. Ok we just need to find someone named Le 😂😂😂
@@SePark sounds interesting haha
Don't even need the math stuff. You can see it in the footage LOL
LOL, I drove almost 200 miles to make this one video so I had to do it. I thought it would be close. I came back and saw the footage and.... FML
I have to agree. Too obvious in the footage. Btw, why are you not the “X” right now?
@@ralphdayot9444 i got fired
@@ralphdayot9444 Haha Ralph! I posted on Craigslist “who wants to be my X?” And didn’t get any response 😂😂😂 I should have brought Phuc Mai Bich from Vu’s channel.
Dude just looking at the footage you can see crane 2S killed it
Plot twist... LOL
To add insult to injury at my expense, DJI costumer service is horrible. I got a faulty motor and because I didn't respond until just after 15 days of owning it (I run my own business, it gets busy), they took about a week to tell me they're essentially not fixing it.
Moral of the story, avoid DJI.
Oh wow, man I'm sorry that happened. Yeh good support is something that's hard to get in the tech field especially with the ones with the monopoly.
@@SePark Indeed.. It sucks but fortunately it's just the motor and not something major. After this experience I'm probably going with someone else when I eventually upgrade.
All that said, man thanks for your content! Great screen presence and I love what you're doing.
I think the massive difference in weight of the rs2 might have played a significant factor here since you weren't actually able to hold it firmly within your grip, and it was instead left standing within the frame you constructed, whereas the heaviness of the crane 2 (almost double the rs2) would have 100% helped it here.
however, still a dope video and thanks for sharing!
I welcome these comments! Seriously dude, it helps me to think differently and make things better. The gimbals were mounted on a Manfrotto 500 plate system which is quad screwed into a 2X4. There is no give on this thing. I went heavy on the bottom build for this reason. If this was little weaker, Crane 2S would shake more because it is top heavy with much bigger motors. This does give some ideas for next test if it involves the Crane 2S. Thanks for watching man!
@@SePark haha I'm glad my input is useful in some way, and thank you for clarifying! I based my comment on watching your original build of the frame, and though I understand what you mean, I was referring more to the wobble caused by the lack of a direct firm grip which you can even see in your original video (of the 2s vs the ronin s) at around 2:09
I have no bias here as I don't own either and only have experience with the ronin S and crane 2, but am definitely in the market for either of these so it's also in my best interest to have a fair winner haha :):)
I love math
super
Thanks Roland!
Ok now you need a showdown, double elimination. Straight Gimbal winner vs what ever the non straight gimbal winner is called.
Haha, sounds expensive but interesting. Once you get into Ronin M territory, I'll have to sell my camera. LOL
@@SePark I was thinking straight stick gimbal vs the crazy non straight ones like the Weebill Labs.
@@therealjimmy5411 ah ok! Haha, still expensive. I do rent the second identical camera to do these test. LOL. I did want to do this series as a elimination style video until the one before this one where DJI RSC2 barely beat Weebill S. Anything vs Crane 2S is like watching a football game score 31 to 3. :)
Your RS2 doesn't behave like others units, it shakes too much. Could it be a faulty unit?
I had a 10 hour shoot for a client with the same gimbal that week. It worked fine. These are some extreme tests. Despite how it looks on screen it didn't do bad. Comparing the data from my first mathematic gimbal test, RS2 did better than the first gen Ronin S.
Rs2 it’s worst than Ronin s!
I Don’t trust these results
Then I encourage you to watch why I started doing this test to begin with: ua-cam.com/video/2jT1AM_cVGQ/v-deo.html
I don't trust Math in pretty much the same way I don't believe in vaccines. LOL
Wow Roland...LOL. All I can say is 2020 is not the year to get vaccinated or buy a DJI RS2 unless you have to. 2021 is gonna be a good year. Zhiyun will probably have a new gimbal out and RS2 price will drop.
Paid review for sure🙄
Bro, you need to watch the origin video of why I started doing this method of test to begin with.
F@ck, wish I have seen this video before getting my RS2 😫
Hey Giannis, haha it's not that RS2 is not stable. It's that Crane 2S motor is insanely smooth. The technology that went into RS2 is incredible. I'm sure you'll make the best of what you have. You also won't have a sore arm after a day of filming. LOL
@@SePark haha exactly, that's the reason I sold my Crane3lab and upgrade to RS2, it's lightweight with many great features.
It makes a great combo with my C70.
Great video my friend, keep up!
@@SaroukosG c70! Dang! haha this has been a good year for you. Thanks dude! You too!