PlayStation 3 Slim Disk Drive Repair
Вставка
- Опубліковано 24 сер 2024
- Email me! retrogameon@gmail.com
Facebook: / retrogameon
Twitter: / retro_game_on
I also write! Check out my staff writer profiles here:
Old School Gamer Magazine: www.oldschoolg...
GameCloud: gamecloud.net....
Website (currently inactive): www.retrogameon...
Really wish you'd said the update thing before taking this apart lol. Thanks for showing the steps of disassembly though
Great video. If it doesn’t work and you “make” it work. Then you fixed it. Regardless. Thanks brah!
Exactly! As long as it works,it doesn't matter how it was fixed
I had no idea that there was an extra screw under the warranty sticker, thank you for that.
I watched another video where they remove the sticker but didn’t explain why the screw was under it... I thought to myself that’s a stupid place for a sticker. This dude explained everything
This completely fixed my PS3, had the exact same problem and now it works like a dream! Also, FYI, the ribbon was not off on mine, so I want to think that maybe popped out during your disassembly. Thanks for the great video!
Used your guide to tear down my PS3 tonight. Dusted off the rails that the laser travels on, put it all back together, and fix the problem. Glad I don't have to replace it, and spending zero dollars is a bonus!
Thank you SO much! My ps3 has not recognized games for years. Couldn't believe it when a game actually loaded up. Could not find a fix for this anywhere until your video. Much appreciated man. Subscribed.
Brill pal fixed my PS3 cheers
Every bit of information on this video was extremely helpful. Thanks for including all the parts you left on this video :)
This is the best video out there, bar none. I thought either my disc drive was bad, or had a 'faulty control board', was getting ready to get out my tools and start ordering parts, when I stumbled across this, and saw what NOT to do. All I needed to do was jiggle the disc around a few times and VOILA! Thank you so much Retrogameon.
Been looking for one of these tutorials for years and now I’ve finally got one 😂
watched til the end; will try the full restore then update before diving deeper. Thanks for the video.
2022 This worked for me, I did not need the full reset as shown but a quick one worked just fine and my disks are now working. Amazing!
Did it delete anything
Good one. And bah, if something is not working and you get it working you repaired it. Easy repairs are the best. Keep them coming, it educates those with non working consoles that it sometimes is just dirty.
Exactly. I shudder to think about all the consoles that have potentially gone to landfills over simple problems.
I did a full format. It took 14 hours and didn't fix it. Also I did a software update to the latest version which didn't fix it either. DVDs and CDs work, but when I put a blu ray into it, then the drive does all kind of weird stuff and sometimes the console freezes. So basically now it's a PS1 with integrated internet connection, DVD player and HDMI.
Then your laser is probably messed up
@@rianeuton1251 yes, I think that's it. I didn't do anything with the Playstation after that since I got it for 20€ with 2 controllers and a 250GB HDD, so I don't consider it a loss. Also I had my last year of school, so much stuff to learn and then Covid happened. Maybe I'll buy a new laser if I can get one cheap.
@@Tom2404 right no that's definitely not a loss, especially if you were just fixing it up that's really good. Luckily it's not a complex system so it should be rather easy to troubleshoot
Nice vid ... As i have gone through servicing and repairing my own PS3 Slim 1st gen (as this is) quite a few times, i can confirm and also mention a few things:
1) This machine had been taken apart before - bottom sticker was missing and the screw U found inside was most likely from the button assembly. There is also a black ribbon-like sticker that goes around the disc drive - which was missing here.
2) The Blu-ray lens WILL eventually go out - all these have finite life-spans, which are greatly reduced, when someone "save-scams" on games (save, reload, save, reload). BUT, most Blu-ray chinese replacement lenses - KEM-450AAA, KES-450AAA and other similar types - are actually of decent quality, don't need any soldering and also don't need any calibration (done by the drive board, housed inside the drive).
3) U indeed don't need to take apart the drive's middle section - with all the plastic retainers & springs - but U need to make sure they all work properly, not broken bits e.t.c. Also - important - the spindle motor, as well as the worm-drive motor need to rotate freely, and the worm driver, together with the lens rails need to be greased properly. If the spindle or the worm driver make a lot of noise, they will need to be replaced.
4) Also, there is a tiny motor in the drive's entrance ... This motor actuates when U insert the disc in the drive and needs to be in a good shape (lubricated & dust-free).
On a final note, i wish more & more folks would actually learn what a great console the PS3 Slim is ... Very easy to take apart & quite easy to service the majority of faults that (may) occur over the years, unlike the PS3 Fat or the Super-Slim.
Just my two cents here ... Cheers again, man & thumbs-up ... Keep up the good work
I’m thinking of doing the system restore but is there a way I can save PS3 wallpapers Ik I can re-download the games I have but is there a way for me to put my themes on a drive or something or do I have to try to look it all up and download it again and will I lose my accounts on the system?
@@altzerz PS3 System Restore "wipes clean" your console, essentially erases ALL Data on the Hard Drive (just gives U the choice for either a quick or a full Format on the disc) and defaults ALL settings ... U won't be able to retain any themes or wallpapers, game and save data, msgs e.t.c... Wallpapers are simple image files, so U can back-up those beforehand on a USB stick or external HDD - same with your game saves (minus the locked ones), any pictures, music and videos U might have on the PS3. As far as themes go though, U will need to look them up again on the net - when U DL a theme, either from the net or transferring it from your PC to your PS3, the console installs it and deletes the original file .. Your accounts' credentials - IDs, login & password - will be deleted after restoring the system, but U will be able to re-establish the same accounts again with the same credentials (whatever settings they had prior to restore will be gone, as well - U will need to re-set everything)... Just keep in mind that with the latest firmware - 4.89 - Sony took away the ability to create NEW accounts from the console itself, as in creating an account from the PS3 & login-in to PSN. I did the System Restore once myself - when i changed the HDD for a bigger-faster one than stock - and i used my same account as before the System Restore & HDD Swap ... I believe the same will apply with Firmware 4.89 - i don't see any reason why the console won't let U use the same accounts, after restoring the system, with or without changing the HDD ... Cheers
@@DarthSimous Ok thank you for the information I have the same PS4 as the guy in the video and my disc Drive don’t work it doesn’t read the desk what do you think are the chances of me doing the update and it fixing my desk because it will kind of be a bummer if I do the restore and it doesn’t fix my disk
@@altzerz U probably meant to say "the same PS3", not PS4, i believe ... U R welcome, but - and if i understand correctly from your 2nd comment - neither a full system restore, a firmware upgrade, nor a Hard Disc swap will fix your disc drive to read discs (Blu-rays or DVDs), if it doesn't currently read discs, when U insert them ... U - most likely - need to swap the laser lens module, as i said in my first comment ... Don't worry, it isn't that difficult, no special skills required, or any special tools ... Search it up on YT: "PS3 Slim laser swap or change", many tutorial vids ... Cheers again ...
@@DarthSimous Hey Darth I’ve got an issue with a used PS3 slim I picked up recently. I’m planning to crack the disk drive open and have a look myself but you seem very knowledgeable. I’d appreciate your insight greatly
The PS3 Slim in question reads disks just fine but I’ve noticed that it starts to emit a low buzzing sound after a while when running certain games off the disk. Closing the game and ejecting the disk reveals what appears to be white ringed markings slowly expanding from the centre of the disk on the label side of the disk. The damage doesn’t seem to be present on the bottom of the disk. I can only assume that something in the drive is scratching the top of the disk as it spins, creating these ringed spiral markings.
I’ve run another disk in the unit and not encountered this issue. The only relevant distinction I can think of between the two games is that one is a dual layer blu ray and the other is single layer blu ray, but I can’t see how that would cause this issue.
If you have any insight I’d be very appreciative.
I owe you a beer. Been messing about for hours. It was the bloody ribbon 🤣
"I still fixed the damn thing!" Lol.
CheapRedBoy im having problems removing the silver screw can u help me by any chance?
@Javier Justice haha
Nice to see the modern stuff being fixed. :-)
3:01 they aren’t proprietary, those screws need a Torx Security T9H bit, you can buy one at a hardware store like I did today
I bought a backup system for a few parts I damaged during my first thermal paste attempt. I ended up fixing everything with the spare parts, installed an SSD and put a new paste. Once I got the PS3 running, nothing would launch. Apps and games would stall and freeze the system. Thanks to a forum post, I found out that if the optical drive is having issues reading disks, then the PS3 won't launch apps. I finally switched the optical drives from the machines, and all the apps worked. It's back to normal.
I don't know how my teardown broke my original optical drive, but I even tested the ribbon cables individually to see if that's the issue. It's definitely some sort of issue with reading the disks.
Thanks bro. My son and I took it apart 2 times and on the 2nd try I did that thing where u plugged it in while still apart and that did the job. Ps3 back in business...
My disk drive does accept the disk but it won’t read it
probably lazer
Ik I’m 3 years late but for people having this problem tilt it up so the disc slot is looking up
@@HBGaMeZ.how
@@HBGaMeZ.yo wtf it worked yooo😭thank you mayn
With a screwdriver???@@HBGaMeZ.
Bro this is the best. I just got a PS3 Slim 160gb for $10 because it wasn't reading games. I've had it for a Week or so with downloaded games and now since I watched your video and did the 10 hour restore it now reads games. Like holy shit 10 out of 10 bro. Thank you.
10??? Man your lucky as hell
@@perrycoffey5410 yeah this lady was selling it for 10 bucks because it didn't read games. And then I gave her another 24 the two controllers
The only thing that works is my DVD
Zero games and zero blurays
omgolly, this helped! my ps3 hasn't accepted disks for over 5 years!
also, this is the only youtube video i could find that actually worked :P
I haven't played disc-based games in years either and I want to again. :(
But did you do the full restore then?... I do have a bunch of stuff I don't want to get rid of, so hopefully I could also make a backup or whatever and restore that onto the restored system later...
Did you had also the ribbon disconnected. Mine was never opened but it does not accept disks, but it ejects them when inside? the input mechanism is kind of messed up i guess
I have this same issue at the moment so thank you I will try all this, I'm glad your PS3 now works, well done! 👍
Oi, just a heads up, I did some digging and realized that the Disc Drive in that PS3 is not the original PS3 slim version of the drive so the disassembly is a little different, i.e: the screws to remove the ejection system are not in the same spot, if you position the more narrow side facing away from you in the OEM drive you’ll see a screw on the bottom left and three clips on each of the remaining corners, apart from that the laser assembly is the same, good video regardless, Cheers!
Hey! I did the same procedures on my PS3 and it read discs again! Thanks so much for sharing this video with us! Thank you very much ! Success !!!!
Glad to hear it. Enjoy
I bought a PS3 slim on eBay for $17. Would turn on but not read any disc at all. Would then knock once after the disc in for 30-40 seconds. Took apart, cleaned the dead bugs and dust. Wiped the laser. Still no fix. Did the 9 hour update. Made PlayStation account signed in popped in SSX and boom. Works fine now. Ty.
I just found a ps3 in an abandon building. It turns on and works perfectly besides the fact that it won’t accepts disks, like the slot is being blocked.
There is a white plastic in the blu ray. This plastic block the dics. You should remove bottom cover bluray and there is a gear white. When you remove this white gear bluray mechanism will be reset and white plastic will be down. Thre are tutorials in youtube to reset bluray mechanism
You have earned a new subscriber good Sir. This video help me out to bring back to life a PS3 Slim I was also given by a friend because his lil one decided to put some puzzles pieces inside the DVD player and it has been laying around my other stuff “to be repaired”
Thanks to you, one less thing in that list and now time to play some “retro” (not that retro) games! Cheers
You taking apart and putting the mechanism back together fixed it lol
I hope you realize you didn't have to take the power supply or any of that apart. All you had to do was take the ps3 cover off take the metal shield off the disk drive then take one screw out which removes the disk drive cover.
I cant figure out how you would do it without taking the power supply out… i think you may be mistaken
Just to share i followed your tutorial few days ago, it fixed mine! The video helped me get inspired. In my case there was a coin magnetized on the disc “locker” (the white circular thing on the center of the loader). Your video showed it spins everytime you load a disc whereas mine didnt.
I got one to refurb and I found a cache of personal pictures of a nude kind. I am surprised the resell shop didn't find them, but they only do a quick function test.
The ps3 restore fixed my problem. The disc would not go in all the way it would take it just a tad in. The reset fixed it! Thank you man!
I think the previous owner did unplug the drive. Then used the console without the drive and updated. The update could not update the drive so it made it unusable on the updated system. This is why launching new updates after pluging it back fixed the drive.
My PS3 is behaving similarly only it does take in the disc but that's as far as it goes once it does that the laser mechanism clicks rhythmically and then you can quietly hear the disc spinning up and down, then it sounds like it's about to eject but then cancels and pulls the disk back in and the Vicious Cycle continues until it gives up
I have one of these lying around , and was gonna throw it out because the cd drive is done for. but everything else is great, i was thinking that i can take it apart upgrade the HD to an SSD . and just download games via the store. after watching your video i ordered a cd/blu ray drive off ebay from a reputable seller. I cannot wait to upgrade this thing , i already downloaded the software for the SSD upgrade.
I had my ps3 with an ssd for a couple of years and sadly it doesn't make much of a difference on it, it's probably that the propietary ps3 file system it's not made to take advantage of the speeds of an ssd.
This video was everything but the problem solving guide I needed for my disk drive, but it was very entertaining nonetheless. Definitely got my like!
This was a helpful guide for me to reference on taking this apart so I could clean it, but I removed a screw from somewhere and can't figure out where the hell it goes now 😭
There are some really detailed photo guides on iFixit. Maybe cross check one of those?
@@retrogameon I found it! Tysfm man
Bro this video is amazing i love the commentary xD Gosh you just earned a sub!!
Restored it and it fixed my problem your a blessing I swear, now only if my ps4 can work again.
I love my Sony equipment.
I can't believe you didn't try the final solution first, being easier and all.
Cool video anyway!
I would have if I knew it was a thing ha. I only discovered it by researching later on (this video was filmed over two or three days).
@@retrogameon what model number is this ?
Thanks for the video, just opened mine up, was having the same challenge as you. Ribbon Cable was disconnected, reconnected & it works great!
Hmm kinda wished I'd watched this video before taking the thing half apart. But I still very much needed to clean the dust out. Guess I'll copy all my saves and try the restart, instead of continuing and getting at the laser. I stopped and switched videos to this one because the two top screws at 5:56, I honestly though the heads had come off mine and I couldn't open the cover. (They are the ends of screws on the bottom of the BRD, lol I'm a major amatuer). OK final results I did continue to the laser and lightly wiped it, put everything back together and it just worked fine, no reset. Not sure if it was dust, laser or loose connection somewhere, but this still was very helpful to the process, thanks!
Good job....thats a real repair...replacing a new lens is not a repair, its a replacement. They're not fixing the broken lens they are just putting in a new one. Because you correctly repaired this you didnt waste money on a new lens. Props!
I too find myself at the end of my rope, took it apart god knows how many times now, cleaned the lenses, put it back together only to not only be able to read disks but also stuck with that dreaded “chunky clunk” sound coming from the disk drive. Now doing a full system restore which hopefully with a little luck, I’ll get to relive simpler times with my console during these COVID times! 🙄
5M1L3Y311 did it work???
Wicks Way Sadly, no. Give it a try though as it’s mos def worth a shot. The “fan trick” is also good:
0. Turn off console.
1. Disconnect the AC cord from console.
2. Press and hold “eject button”.
3. Whilst pressing, reconnect AC cord.
4. Wait until fan kicks in.
5M1L3Y311 dang! I actually did the fan trick before. It didn’t improve the eject sound or read my game. It’s currently 20 mins in to the 7hr restore so I’ll see if anything improves in the morning. If that doesn’t work, then I’ll drop it off at the local retro game shop. They only charge $30-$50 to repair the PS3 so that’s not too bad.
thats called a torx security bit and its not proprietary in case anyone hadn't figured that out
I bought a new laser 1 week ago. Tried to replace it. Didn't work right away. Took apart like 10 times!
Very frustrating. My original laser had gunk on the little bars. (Dirt' dust, n grease) also the door way was dirty. (Used q-tip). The first attempt: disc wouldn't go in anymore! Another attempt: I forgot to put in screw that holds the little plastic parts. Another attempt: I forgot to put back that little magnet disc. Still didn't work. But kept retrying ▶ribbon connectors.◀ The one outside the laser deck. The one that has that grey foam on it. My last attempt finally 'ka chunked' and fitted very solid. Previous attempts it would go on loosely. Never felt it was a super solid connection. On both ends. I also previously secured the ribbon onto the deck with tape. So it wouldn't loosen when putting it back together. My original issue was that laser stopped reading disc. First blu ray. Was playing dvd n ps1 until we tried a cleaning disc. Then stopped playing anything. But would allow discs to go in. I think it was the laser. But when putting it back together I was loosening already loosen ribbon connections. My ps3 is now working again with a new laser. Cleaned out doorway. And put back together with way less screws than originally had.
I paid 30$ for new laser. Was it worth it? Yes. I learned a lot about how my ps3 works and how its built together. Wish you all the best of luck. 👍 And note to PlayStation how this wouldn't be an issue if their new system were backwards compatible. In my frustration I was totally thinking about getting an X1! 😁
Thank you for sharing your experience!
Thank you I didn’t see the second ribbon and it really saved my life great video
Not me searching for this video because my 2 year old put a jigsaw piece in the disk drive..
Still saving PlayStations over here in 2020
Im glad I found this video, I found a ps3 slim from Value village for 25$ and i THOUGHT it was working properly outside of the hideous dust buildup but then the drive would not work, but after watching this, opening up and trying to remove more dust from the blu ray drive, I couldn't find anything weird with it. So I tried putting in a DVD like you did and APPARENTLY that still works, just not the blu ray like you. So I'm now trying out the system restore to see if that'll fix the issue on my end.
Did it work?
@@alessiocinalli8315 Only for single layered disc games at the time. Double layered gmes like metal gear solid 4 and blu ray movies will STILL not work. So " I concluded it needs either a laser replacement or a drive replacement.
My PS3 was gifted to me but before it was in my possession it was dropped and the disc drive now sounds like a paper shredder trying to shred metal
I have an old PS3 that I picked up cheap because it was overheating.. Replaced the fan and that problem was fixed.. But, similar to yours, no Disc Drive.. Replaced the laser assembly, no go.. Bought a whole new drive... No Go... Tried new cables, still no go.. So I threw it in a box in the closet.. After watching this video I'm going to dig it back out and see if the long format will fix it.. Thanks for the inspiration and hope!
Good luck! Let me know how it goes
What’s the update ?
Has anyone heard of a similar issue where a PS3 slim will accept discs and you can hear them spin up, but then you hear a CHUNK CHUNK pump shotgun reloading sound and the PS3 eventually says "cannot read the disc" ? I once got it to accept a disc by trying it like 40 times. Feels like something mechanically is failing. Dried out belt or something.
o consider even simple things like cleaning out the console from the inside, repluging in loose or disconnected cables, updates or system restores Fixes if the system was not working properly before it was cleaned out, system restored, etc. because although easy and simple it resolved the issue whatever that issue is and most people would not put the time in or not know how to do even the simple stuff to resolve/fix the system's issue/issues
I had the same issue but i just hard resetted and it now works so just hard reset first
Do you have a video on how to put it back together
Just watch it in reverse duh
Just watch it in reverse duh
Just watch it in reverse duh
Just watch it in reverse duh
Just watch it in reverse duh
How you fix when it eject randomly but the disc doesn't come out then a few seconds later it reads the disc
2024, the full restore and quick restore did not work for me.
It absolutely was the ribbon cable, mine was plugged in. My issue was my kid shoved a nickel in there.
I have the Gran Turismo 5 Race Pack Dark Blue PS3 Slim from 2010 and it won't read PS3 games but it does read PS1 games.
It's still a repair because it wasn't accepting the disc in the first place so it's a repair. I'm having the same issue, my PS3 is not reading the disc, I hope it's the same issue you had because that's pretty simple. People always got to remember it could be a simple fix but we're always looking for something harder. Thanks good video and it makes sense, I should of known better to try that first after taking it apart a few times, lol.
P.s you should of added putting it back together in your video because that would help alot of people that way also.
The restore worked for me! Thanks for doing this. I installed a larger HDD years back so the restore took a lot longer.
The white thing at the bottom in the middle is sticking up and i cant put any discs in it. May you please help me ?
Same
I’d just like to let you know that I haven’t been getting notifications of your videos for the past few months, and because of that I haven’t seen any of your latest videos.
Did you hit that bell icon thing'o?
I reckon I should, but I don’t have to for any other channels I’m subscribed to. Probably because your in the land down under.
Just went to try this after like 7 or so years of mine not working. I ordered a replacement disk drive earlier today but then stumbled onto this video, so if this works I'm gonna be mad at myself lol. The seller I ordered the replacement from at least offers returns if I need to but I've caused myself way more of a headache than needed if a full restore does work.
I remember I thought I tried to restore it back in the day but my stupid younger self probably just did the quick restore to be honest.
Where did you find a replacement disk drive. I think I need 1
Mine everything insert and eject disc is alright but since the technician we buy to fix the system bcz when it’s been update the ps3 somehow prob so we sent to technician but after that I can’t play all my ps3 game disc do you know what’s actually wrong here
i followed the same steps in your video but my disk drive still wont accept disks. Do you have any alternative methods??
edit: my ps3 runs on 4.85
Was the whole reset really needed? My whole family including me is upset about losing everything we had on it.
12:45 THE ART OF BUTTON MASHING REARS IT'S HEAD ONCE AGAIN! lol But I'm trying this now! I have the exact same issue on my PS3 Slim so I hope it works! Mainly because like you said it seems like it would be a hardware issue but it's apparently a software issue. And that's really interesting and funny to me! Even if it doesn't work great video!
I still have my PS3 but the disc drive is almost on its way out. When I press the eject button it will slowly eject the disc drive, other times it would come out with slowly ejecting. Would any suggestions on the type of disc drive I should get for my PS3?
this problem make the person really angry and sad
"Hey lets do a system restore. What is there to lose?" Ehm perhaps all your safe data?
Hm. I wonder if the big restore and update will work for mine. It accepts discs, but won’t read them. Wouldn’t hurt to try before I get into ordering components.
Did it worked
Toasty Hoodie did it work
I updated my PS3 did the quick format and at first I thought it was working and tried to play Far Cry 3 only to be met with a 80010514 error. Then it wasn't reading the game anymore. I put in a blu ray movie and got nothing but DVD movies worked fine. I also tried full formatting and was met with a 8001002F error. Probably will try both quick and full formatting again, but at this point I think I might end up getting another PS3 (or get a PS4) since it is apparently banned from using PSN for no apparent reason.
Update: Both quick and full formatting still did fix my issue. I guess I'm buying another PS3...
Mine has a ribbon under the disk drive that I can’t get reconnected
yooo no way, never thought it'd just be an unplugged ribbon cable! drive is working great now lol. I took it apart anyway cause there was something rattling inside, found a penny lol.
Score!
I'm looking how to put back this spring cause i have this problem too right now
Thank you so much this helped a lot
Does the restore delete anything from the ps3?
My ps3 takes the disc but it tryes to eject the disc automaticly but it doesnt eject it makes the sound. And if l press the eject button it eject normaly? And it doesnt detect the game
I remember when I accidentally got coke on my PS3 and now my disc system doesnt work. I’m worried if I have to dissemble it or wait 7 hours and reinstall everything. The ps3 works fine digital games work.
My fricking spring fell off and I don’t know how to put it back on help!!!!
haha
Well, I have similar problem right now... kinda. I had a non-working laser, it was reading DVD's but not Blu Ray games and similar. So I went and ordered replacement laser and I just replaced it yesterday. And guess what, now my PS3 refuses to pull DVD's in. I'm sure I assembled it right, and I checked it few times, even unplugged and plugged everything back but nothing is happening. And I'm sure I did not break anything, since all cables and everything else went out easily. I'm kinda lost now, and I really have no idea how to fix it. I might try to take it apart one more time, but it's strange that it was working normal with the old laser, and now it won't even pull DVD's in, and even when I force one in it just ejects it with three beeps.
Update. I took it apart again and I realized that I did not push one of the cables till the end, so it was like more than a half inside but not fully and it was not working properly because of that. Now my PS3 reads games normally and everything works fine.
How the hell do u get the safety screws off it’s so hard
This is absolutely a repair...a simple one but that doesn't matter. I once bought a DS Lite that didn't play games. Turned out it did but the previous owner only had an R4 card with the wrong software on it so it didn't boot. The DS was just fine.
I can’t get the disk drive to come out any tips?
I found a PS3 basically brand new but it will take the disc it just won't read it or even try
That white arm thats bt the laser spring poped off how do i put it bak on
well now i gotta do a full restore on mine to see if that fixes my bluray issues
Mine is doing this now.. thx
I tried to clean my PS3 Slim a few years ago, and afterwards it wouldnt read any discs. I found it pretty strange and decided just to put the PS3 away because I thought the disc drive broke in the process of trying to clean it.
A few hours ago I decided to try to find out why it wouldnt read discs and guess what... I forgot to connect the big wide ribbon cable underneath the disc drive... I feel pretty stupid lmao
I have a problem with the white thing on the right in 7:33 it doesn’t bounce back it jus comes off and really loose
The update FIXED mine!!!
You didn't actually showed the most important part, and that is putting the tech in hybrid and installing it on gaming menu. Can you do that?
Restoring the system fixed mine
6:23 ok so a few questions. I've noticed the middle piece is magnetic and attaches to the rotating part. are they supposed to go completely together? another question I need answered is does the white magnetic piece go over or under the two white arms. if so, is it supposed to be taken out so easily?
Sadly this didn’t work for me still only plays dvds