Hi! Can you tell me the name of the board he repaired? I want to buy a new one for my led tv but i'm not sure wich part is that. Is it the LED driver board? Or the main board?
Look at all the 'bot comments. It's so obvious that this is stolen content because in the background behind the computer voice you can hear the voice of the original person who made the video. Shameless content thievery.
My backlights was spontaneous turned out to be a voltage regulator issue. If you haven't done a video on that subject yet might be worth showing people. As I ordered new backlights for no reason other than getting too far ahead of myself lol
My TV backlight went also. While I am an experienced electronic technician, I have little experience with TV's. I wasn't sure if the fault was in the LED array, or at the inverter, or what the normal output voltage is. So I went online to find out. It turned out to be a defective diode. I looked to where the LED's plug into the board and random checked the diode closest to it, as I was working without a schematic. So in answer to your question, it's speculative. Unless, of course, you have experience repairing LED TV's under your belt. In the early days of my repair work, I resorted to random testing of components. As service manuals and schematics became more accessible, I could fault-find more strategically. But in all cases of repair work, you have to start somewhere. You work from the known to the unknown, picking up clues along the way. Such is the game of repair work. There's no set way to repair every fault. You have to use your due diligence, think logically and methodically. It makes the game all the more interesting and mentally stimulating.
Good video simple and it's easy to find the problem. I wish my Phillips also have the same problem but for mine is quite complicated to analyze the problem I have a TV Phillips the output for the led it's 38vlts when release standby. Before release standby it shows 38vlts. No backlight on dark image Phillips appears. I have check the inverter seems only 38vlts. Do you think the inverter is bad. I have check the resistors smd near the inverter. It's beeping.may be 1 is shorted. It's solder in parallel. That's why all are beeping. In your opinion what would you do? ❓
You try to monitor the voltage in real-time. see if the voltage suddenly went up. It may be that you have an open led. or the driver is the problem. resistor can't be shorted if is damaged, check the resistance value, it will beep if is low resistance.
@@tevzTVTevatronics thanks a lot my friend. No the voltage doesn't not went up. It stay on 38vlts. Yes the resistors is beeping. In my opinion the led driver is shorted.. Thanks a lot for your help. Have a good day 😉. ❤️
Such an amazing skillset to have. My BenQ Curved 30.5" display has faded on the far right hand side. I am getting round it by just avoiding having any windows extend that far....it'd sure be nice to actually have the skill to fix it lol
The switching IC can be a problem, as well as the HDMI chip, and port. Also I know it’s kinda old but if used OTA Over The Air TV RF, it’s still big broadcasted just digitally in a lot of places. with a good antenna it’s quite good, so it’s still used! Lighting strikes to any of the areas “can also effect several other circuits” repetitive surging in the home can also take out components a proper surge protector can help, but it will absorb it too!
Hi Tevz, thanks for sharing your skills!!! I have subscribed to your channel and follow many videos but it's always same kind of content.. why don't you do other like Aircon, Refrigerator or any other variety of electric appliances?
That looks like I have the same issue I’m not sure I still need to test both the transformer & the diode but if they are both working I’ll just have to bypass them if at all possible.
Hi, my LG TV has a problem similarly, If I plugin to wall outlet, the standby LED light is on, but if I switch it on with the remote, the standby LED light blinks several times and stops, but the TV not turning on, it stays on a black screen. Hope you can guide me with my problems. Thank you in advance brother
question- my backlight will come on when fully warmed, takes a while, sometimes doesn't come on at all, intermittent issue. if it's the driver, what does the driver look like and should i test for volts, ohms, continuity? thanks.
Thank you for your video, but, I'd still check for short when there's no diode inside the circuit. I prefer this way cause had some mosftets shorted and they've caused the short of the diode. You've done this test from I've seen after soldering. If I've seen it wrong and you did test before soldering it, sorry :).
They're is saying the mosfets that were shorted have caused the diode to short so if you didn't test the mosfets and just tested and changed the diode it's likely that the diode can short again
@@keronjoeph217 thank you, didn't know this one. But, how to test MOSFETs for short, if everything is fine? Once MOSFETs are shorted, they stay this way and they are damaged. So, don't understand what you mean here. Can you elaborate, please? I've started to use a backlight tester for the backlight and check voltage out of the PSU to the backlight before ordering the backlight. That's all I do. But, happy to learn new ways :) if you know any :).
@@tevzTVTevatronics and thats because of the voltage transformer right? Or is it because the motherboard regulates the needed voltage out off our 110V outlets?
See because i just want to know if its a voltage issue or if the motherboard has a special resistor that allows the leds to turn on? Because i salvaged two tvs n well i wanted to use the led strips on my car as either running lights or the occasional off road adventure.
In my case is capacitor 470uf and 330uf became bloated.. that is why the screen is pop up quickly while turn on the tv then it's dark, btw my backlight totally is fine
I have a 2018 lg 60 inch led. For a while after turning on the screen would be very dim. I could make things out but barely.After 10 to 30 minutes the picture would pop back up bright and normal.now it’s just staying very dark and dim all the time. Wondering if this could be my problem. I bought a new tv was just wanting to tinker with it
I live in mexico my lcd tv show black screen but when i mobile light on screen seem is working show me very few light on screen like 1 %something like that.can you help me this what should i do?please
Can you tell me what is the name of the board you fixed? I want to order a new one but not sure what the name is. Is it the led driver board? Or main board? I have a e-motion led tv.
I dug into my tv for this and shocked the piss out of myself I’m changing the diode that hurt me thank you for your video but I’m retarded so fingers crossed 🤞
How much you charge for repair electronic where you are can i send you for repair electronic and pay all to send me back the device to Greece THESSALONIKI city where you are how much you charge repair
I changed my backlight it was working, after one week backlight dont come on, when I toched the connector of wire that connects power board with mother board backlight come on and works for 1h after that they work dimed barely see the screen, anyone nows?
I changed them all was working for 1 week and then stop working, I opened it touch connector and it made spark and start working and again not working after 1h(connector of power board and motherbord)
Yeah. No this is not a DIY for me. I hate Samsung. They honestly make junk. 50in flat screen not even a year old half screen is to dark. I don't see myself being able to fix it.
Many techs call it an inverter. Yes, it's not an inverter. What about this www.amazon.com/Backlight-Universal-Inverter-c80-480mA-32-65Inch/dp/B07VVKS35L
I have 85h6510g hisense led tv and backlight not working. I can see images when use flashlight. I dont have service manual to check any of these boards. It has main, driver and tcon separately. Please help to diagnose correct problem before i buy any unnecessary boards or led strips. Tv is only 2.5years old. I speak hindi so if i could call you if you could provide contact number i would really appreciate it thank you.
It is legit, i had been repaired 3 EZY32 inches led tv by this tutorial and it’s worth it.. thanks to u guys..and god bless
Hi! Can you tell me the name of the board he repaired? I want to buy a new one for my led tv but i'm not sure wich part is that. Is it the LED driver board? Or the main board?
Well done tevz, another one on the scoreboard! Good job.
Look at all the 'bot comments. It's so obvious that this is stolen content because in the background behind the computer voice you can hear the voice of the original person who made the video. Shameless content thievery.
Wonderful as always... Learnt something
I'm glad you've learned something.
My backlights was spontaneous turned out to be a voltage regulator issue. If you haven't done a video on that subject yet might be worth showing people. As I ordered new backlights for no reason other than getting too far ahead of myself lol
check led driver firs before buying leds
Okay thank you for the heads up will remember this on future sir
I just made the same mistake by ordering led back lights. My Samsung tv is having the same issue as the tv in this video.
great,great, and simple repair well done sir😊👍
Many thanks
Hi. Thanks for the video.
Excuse my fault of knowledge. How do you know the diod is the inverter??
My TV backlight went also. While I am an experienced electronic technician, I have little experience with TV's. I wasn't sure if the fault was in the LED array, or at the inverter, or what the normal output voltage is. So I went online to find out.
It turned out to be a defective diode. I looked to where the LED's plug into the board and random checked the diode closest to it, as I was working without a schematic. So in answer to your question, it's speculative. Unless, of course, you have experience repairing LED TV's under your belt.
In the early days of my repair work, I resorted to random testing of components. As service manuals and schematics became more accessible, I could fault-find more strategically. But in all cases of repair work, you have to start somewhere. You work from the known to the unknown, picking up clues along the way. Such is the game of repair work. There's no set way to repair every fault. You have to use your due diligence, think logically and methodically. It makes the game all the more interesting and mentally stimulating.
Отличный ремонт! Лайк!
Good video simple and it's easy to find the problem.
I wish my Phillips also have the same problem but for mine is quite complicated to analyze the problem I have a TV Phillips the output for the led it's 38vlts when release standby.
Before release standby it shows 38vlts.
No backlight on dark image Phillips appears.
I have check the inverter seems only 38vlts.
Do you think the inverter is bad.
I have check the resistors smd near the inverter. It's beeping.may be 1 is shorted. It's solder in parallel.
That's why all are beeping.
In your opinion what would you do? ❓
You try to monitor the voltage in real-time. see if the voltage suddenly went up. It may be that you have an open led. or the driver is the problem. resistor can't be shorted if is damaged, check the resistance value, it will beep if is low resistance.
@@tevzTVTevatronics thanks a lot my friend.
No the voltage doesn't not went up. It stay on 38vlts.
Yes the resistors is beeping.
In my opinion the led driver is shorted..
Thanks a lot for your help.
Have a good day 😉. ❤️
Such an amazing skillset to have. My BenQ Curved 30.5" display has faded on the far right hand side. I am getting round it by just avoiding having any windows extend that far....it'd sure be nice to actually have the skill to fix it lol
Your videos are very educational.
Thank you. What’s the music artist in background?
Thank you so much, from India
Shout out to you
@@tevzTVTevatronics me too
Thanks I like ur video
Great tutorial thank you for sharing this video
Thank you too for watching.
Is the inverter diode the most common issue for LED backlights?
The switching IC can be a problem, as well as the HDMI chip, and port. Also I know it’s kinda old but if used OTA Over The Air TV RF, it’s still big broadcasted just digitally in a lot of places. with a good antenna it’s quite good, so it’s still used! Lighting strikes to any of the areas “can also effect several other circuits” repetitive surging in the home can also take out components a proper surge protector can help, but it will absorb it too!
His bench is so messed up, that I know for sure the guy is good.
Hi Tevz, thanks for sharing your skills!!!
I have subscribed to your channel and follow many videos but it's always same kind of content..
why don't you do other like Aircon, Refrigerator or any other variety of electric appliances?
That looks like I have the same issue I’m not sure I still need to test both the transformer & the diode but if they are both working I’ll just have to bypass them if at all possible.
Very nice 👍 Thanks for sharing.
Very nice video sir 👍
Keep watching
Nice video, thanks for sharing it :)
Thanks for watching!
Thank you so much!
Thanks for that!
Great job......thanks 👍
Welcome 👍
Good 👍 thanks 🙏
Very good
Robot voices - the bane of UA-cam.
Thanks for sharing boss 👍
No problem 👍
Well done
Thanks for the video! When you do this do you discharge the capacitors first? Thank you!
Yes, first discharge the main capacitor before doing the repair.
@@tevzTVTevatronics Thank you very much!!!!
I am from Bangladesh
Thanks for watching
Hai myself from india enjoying ur video I request u if u can do in English
IT is English.
LOL.... It is English 🥶
@@tevzTVTevatronics Dont worry we understand you haha ;p
Congratulations master 🥰🥰🥰🥰🥰🥰🥰🥰🥰
Thanks
Master your contact number plese 🙏🙏🙏🙏
Thanks Bro...
Thank you sir
🤗🤗😃👍👍
Hi, my LG TV has a problem similarly,
If I plugin to wall outlet, the standby LED light is on, but if I switch it on with the remote, the standby LED light blinks several times and stops, but the TV not turning on, it stays on a black screen.
Hope you can guide me with my problems.
Thank you in advance brother
question- my backlight will come on when fully warmed, takes a while, sometimes doesn't come on at all, intermittent issue. if it's the driver, what does the driver look like and should i test for volts, ohms, continuity? thanks.
good warks
Great video 👌
I wanted to know what. ml vin stand for in tcon board
Vin volt s in
Ml ? Main line? ??
👍👍
Please explain how I can identify ckv lines if not marked
by group of lines
Sir what is diode number pls tell me and it can be used in other leds also
MUR460
Please make a video for beginners
Good thanks
Thank you too!
Thank you for your video, but, I'd still check for short when there's no diode inside the circuit. I prefer this way cause had some mosftets shorted and they've caused the short of the diode. You've done this test from I've seen after soldering. If I've seen it wrong and you did test before soldering it, sorry :).
I don't get it, what is your point...?
They're is saying the mosfets that were shorted have caused the diode to short so if you didn't test the mosfets and just tested and changed the diode it's likely that the diode can short again
@@keronjoeph217 thank you, didn't know this one. But, how to test MOSFETs for short, if everything is fine? Once MOSFETs are shorted, they stay this way and they are damaged.
So, don't understand what you mean here. Can you elaborate, please?
I've started to use a backlight tester for the backlight and check voltage out of the PSU to the backlight before ordering the backlight. That's all I do. But, happy to learn new ways :) if you know any :).
@@screen-protector I'd like your help with my tv
Maybe I can email you?
Ok .🌷🌹🌷
where are these tvs used, it's always filthy
The "arcade" section of an adult book store most likely....
I had a question just regarding the LED strips in the inside of the TV. So those LED strips need the TVs motherboard for them to function?
Yes, of course.
@@tevzTVTevatronics and thats because of the voltage transformer right? Or is it because the motherboard regulates the needed voltage out off our 110V outlets?
See because i just want to know if its a voltage issue or if the motherboard has a special resistor that allows the leds to turn on? Because i salvaged two tvs n well i wanted to use the led strips on my car as either running lights or the occasional off road adventure.
In my case is capacitor 470uf and 330uf became bloated.. that is why the screen is pop up quickly while turn on the tv then it's dark, btw my backlight totally is fine
How do I identify ckv lines in tcon board hv320whb - n55
group of lines
My tv also have problem of the back right sir
I have a 2018 lg 60 inch led. For a while after turning on the screen would be very dim. I could make things out but barely.After 10 to 30 minutes the picture would pop back up bright and normal.now it’s just staying very dark and dim all the time. Wondering if this could be my problem. I bought a new tv was just wanting to tinker with it
Probably the backlights
I live in mexico my lcd tv show black screen but when i mobile light on screen seem is working show me very few light on screen like 1 %something like that.can you help me this what should i do?please
check the back light bulbs
Super super super
Super
Sir may flat tv frestiz 50 inches is not open the backlight.. where is problem
one of the leed is busted
The All backlight is test is light... where is problem sir
@@dodflores1192 Check the led driver
Can you tell me what is the name of the board you fixed? I want to order a new one but not sure what the name is. Is it the led driver board? Or main board? I have a e-motion led tv.
I don't note it sorry.
Yes it is the main board or also known as combo board, board model no is TP.MS3393.PB801 hope this helps you 👍
I dug into my tv for this and shocked the piss out of myself I’m changing the diode that hurt me thank you for your video but I’m retarded so fingers crossed 🤞
wat if the backlight turns on when i turn the tv on , but only stays on for like 10-20 secs n image goes black. but can see the menu up close.
How much you charge for repair electronic where you are can i send you for repair electronic and pay all to send me back the device to Greece THESSALONIKI city where you are how much you charge repair
It's too risky to ship a flat-screen TV, It ends up with broken panels.
Watching SKILL TV
thanks for watching
My own is not backlight it show but the picture will went off after 5 minutes what could be the problem
My tv flickers fast at first and it’s noticeable at the top
Too confusing sorry but im so annoyed that my tv stopped working
Same but after remove caps, no power on, no lights
I have same issue with my akira led tv
how should i fix my tv backlight without service? i dont have that much money to pay for it
Superman,,,
Newbie is watching
How can i cut ckv lc pt320at02-1-xc-1
My tlc screen has no light in it but i still can hear the sound wat must i do
What are you watching in the background
kuya, pa-help naman po. jvc lt-65c880 no image at backlight is working..
Im not touching the inside of a tv i been shocked before when i was little very unpleasant
Why don't you use digital multimeter
We Don't understand this meter
That panel give me mini heart attack
WATCH OUT! If you turn on the tv and can see the pixels but without the backlight, it's just the led bars
👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾🙏
Saan shop nyo
laoag city
SIR, MODEL NUMBER PLEASE!
sorry not noted
I changed my backlight it was working, after one week backlight dont come on, when I toched the connector of wire that connects power board with mother board backlight come on and works for 1h after that they work dimed barely see the screen, anyone nows?
do you changed all the led backlight? if not. try to change them all.
I changed them all was working for 1 week and then stop working, I opened it touch connector and it made spark and start working and again not working after 1h(connector of power board and motherbord)
Now backlight is working 20% even less
@@rokoperaic8243 it is probably the led driver is now the problem.
@@tevzTVTevatronics you maybe have some video about that one?
Yeah. No this is not a DIY for me. I hate Samsung. They honestly make junk. 50in flat screen not even a year old half screen is to dark. I don't see myself being able to fix it.
Your location
Island of the Philippines
Did you steal this video and just put a AI voice over the creator's?
Don't say "inverter"
It is "LED DRIVER" SO SAY DRIVER CIRCUIT
Many techs call it an inverter. Yes, it's not an inverter. What about this www.amazon.com/Backlight-Universal-Inverter-c80-480mA-32-65Inch/dp/B07VVKS35L
He said Inverter ua-cam.com/video/WxGP96HLZas/v-deo.html
Dude, you spent almost 10 minutes in your video changing a single diode? What a timewaster.
The 10 minutes content the more adds youtube gives.
You're abusive
fukn awsome mi g
I have 85h6510g hisense led tv and backlight not working. I can see images when use flashlight. I dont have service manual to check any of these boards. It has main, driver and tcon separately. Please help to diagnose correct problem before i buy any unnecessary boards or led strips. Tv is only 2.5years old. I speak hindi so if i could call you if you could provide contact number i would really appreciate it thank you.