I am no electronics expert... But it amazes me how all the components work so i ENJOY watching your videos Already a suscriber so thanks for posting Greetings from Mexico
dear tavz nice videos. you have good knowledge and experience.but i wana say when you put liquid solder put some flux before it will be more easy to fix and won't leave solder balls but anyway nice work
Greetings from Venezuela, excellent video, thanks for sharing your knowledge. One question on the BL there was 2.7 volts when it didn't turn on, what voltage should you measure there? when you replaced the IC it didn't say the voltage. Greetings
Hi Tevz how did you know it should have been 100 microfarads. 2nd question is are the same identifier on the back side of the board for the lactation of the capacitor.
Hi i have hisense 85h6510g led tv and it has no backlight. Can you help to see which board is bad and what component could be bad. I dont have ser ice manual to check what voltages should be present when off and when on. I just dont want to buy wrong board or led strip for no reason. Thank you.
My TV turns on…but goes black after few seconds. It turns on everytime, and goes off after a few seconds. Sometimes if I’m lucky, it doesn’t turn off, but usually it turns off. Any help will be appreciated.
Hello friend, I am a follower of your channel, ?? You will not have dump from Philips 32PFL5606H/12, SPI and NAND FLASH, greetings, the videos are very good...
I am from India and i love your videos very much.
Thank you so much 😀
You are an expert . You make me fall in love with Electronics
You are the best repair tvs, waiting for next video
Thank you so much 😀
I real real appriciate your work sir and i have get new idea daily thank u so much.... Greatings from Tanzania
So nice of you
So practical & simple. Again, thanks from Nigeria
Best channel Mr Tevz keep up your videos are the best u explain everything very clear until u found faulty component and fix it u are the best thanx
Maraming salamat po Sir Tevz.
God bless po sa inyong pamilya.
salamat
Thanks for your the tutorial, simple, straight to the problem solution, success always👍
great job again uncle tevez i missed the subtitles but i got the gist greetings from hungary robert's fan
kószónőm a feliratot
I wandered the inscription
Thank You Sir! It is very helpful! From ETHIOPIA!
Very Nice. God bless you
Thanks for another great video Tevz. I learn something new every time. Best wishes.
Very welcome
Understand very well and liked.
Mr. Tevz, your explanatory method is very pedagogical. Thanks for sharing your experience. Kind regards. 👍👏🙏🙋♂️
Many thanks
You fix and make us happy, thanks.
Glad to hear that!
Good work the on beatable mechanic
I am no electronics expert... But it amazes me how all the components work so i ENJOY watching your videos
Already a suscriber so thanks for posting
Greetings from Mexico
Thank you very much!
Tanks fore tuturial master watching 👍👍👍🇵🇭🇵🇭🇵🇭💯🆗🆗🆗
I love your videos sir, and thanks so much for sharing
My pleasure
Always first one to comment, well done Sir
Good great best nice job master thanks for sharing ❤️👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👌🙏
Thanks for watching
Newbie is watching master
Watching from north caloocan
Where is Caloocan? I'm watching from South Africa
Muy buena explicación y muy buen video muchas gracias por sus conocimientos con cada video suyo aprendo mucho mas. saludos cordiales
Sir Exelint information vido
Nice work👍👍😎
Thanks 👍
Nice job bro 😊😊😊
Excellent comme d'habitude 👍👍
dear tavz nice videos. you have good knowledge and experience.but i wana say when you put liquid solder put some flux before it will be more easy to fix and won't leave solder balls but anyway nice work
It would be nice if you explained -
The pencil eraser thingy
That’s some weird looking flux , grey
More detail would be nice
Thanks
Bob
And I love the roster in the back ground ! !
Very nice 👍
Thank you 👍
Troubleshooting expert ka sir..❤
Sir matanong ko lang kasi ung tv ko skyworth hindi maadjust ang backlight sa menu setting 0-100 walang pagbabago..
Watching po Master
Great videos
Türkiye den selamlar
Greetings from Venezuela, excellent video, thanks for sharing your knowledge. One question on the BL there was 2.7 volts when it didn't turn on, what voltage should you measure there? when you replaced the IC it didn't say the voltage. Greetings
This are wonderfull ticnition
thanks 👍👍 👍
thank you dearly my question is we can use STR w6000s without drive ic and mosfet for backlight driver?
Good day Mr Tevs I'm loving ur videos I have a question how can I remove the IC Driver without hot gun?
Spread the soldering led and melt it up both side and lift up or slide through the tweezer
Good job😊
terimakasih kawan , sangat bermanfaat bagi saya,...
Sir, can I ask what is the name of the cream used in soldering?
the sn51dp ic as 5 pins and the ob3350dp 4 pins.how did you place the ic on the pad or does it matter.thanks
Nice master
Thank you... What is the source of the voltage on pin No. 8 ic and how do we test the operating voltage from its source?
Hi Tevz how did you know it should have been 100 microfarads. 2nd question is are the same identifier on the back side of the board for the lactation of the capacitor.
Nice
Great...
excellent
Thanks!
Hi i have hisense 85h6510g led tv and it has no backlight. Can you help to see which board is bad and what component could be bad. I dont have ser ice manual to check what voltages should be present when off and when on. I just dont want to buy wrong board or led strip for no reason. Thank you.
Your content 8s good bt when you 7se an analogue meter it's hard to understand what you are measuring
They used pmw ic as switch? Is it possible to build MOSFET as switch if we don't have ic replacement??
mosfet wont work alone, it need a driver.
Super sir
hello dear tevz !! i have the Ic Dap6a i cannot find it in my contry . do you have idea for equivalent ?? than you
Just like in this video, that type of IC are similar, try if you have a power board just like it.
@@tevzTVTevatronics thank you !!!!!
my led tv back light dont turn off if i power it of any ADVICE were to check on the motherboard?
In my case mosfet getting hot and tv turna off after few mintues....plz guide..
I’m guessing the pencil thingy is a wire brush ! ?
Good boy
C'est l'oscilateur?
yes
How did u disconnect the ic driver?
My TV turns on…but goes black after few seconds. It turns on everytime, and goes off after a few seconds. Sometimes if I’m lucky, it doesn’t turn off, but usually it turns off. Any help will be appreciated.
🏆🏆🏆👍👍👍
👏👏
❤👍🏻👍🏻👍🏻
Queremos ver esse tipo de drive em portugues. angola
💝💖💗💙
Hello friend, I am a follower of your channel, ?? You will not have dump from Philips 32PFL5606H/12, SPI and NAND FLASH, greetings, the videos are very good...
good
tq. Sir.
16:01 black capacitor blown
Sony 40w800 kedip 3 kali tolong kerusakan nya apa makasih.
So
Why don’t you tell us why the analog tester ! ?
👍
N-channel: red probe to G & black probe to S to make it ON. but you reversed them & it's for P-channel..
using the reball paste makes my OCD flare like a nuke lol.
Эти тв что в коровнике стояли? Прежде чем нести в ремонт, хотя бы протёрли бы от грязи ! 😱
Fake and fraud
Very nice sir
Kuys tevz pwd mahingi po ung contact number nyu may papa ayos po sana ako laptop
DM ka nalang sa Facebook page ko