Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Beautifully done, sir. Thank you for sharing.
4:35 - There's a lot of high difficulty woodworking here - but this is the one that would stress me out the most - one slip and you're back to square one!
Yes. It takes a lot of focus.
Great chair! I like to notice the changes in technique from each of your chairs to the next.
I'm glad it helped:)
아 역시 제취향엔 루프백이 원탑이네요. 아름답습니다.
욷은님. 1등! ㅋㅋ
깨알같은 해빙기 ㄷㄷㄷ 락클러 두대로 빡세게 굴리다가 깨달음 얻고 갑니다 엄지척
저는 락클러가 빨리 고장나는 바람에 해빙기를 구입했지요 ㅎㅎ 락클러가 주전자라면, 해빙기는 전기주전자입니다. 얼릉 업글하세요^^
멋진 영상 멋진 의자..^^
고오맙습니다. 유튜브 컴백 기다립니다.
벤딩을 저렇게 하는거였군요. 의자도 멋있고 만드는 모습도 너무 멋있으세요. 맨날 직사각형 형태의 가구만 보다 밴딩하는걸 보니 너무 멋있네요
TAA 66 벤딩은 목공 속의 또다른 장르인것 같습니다. 영상속 벤딩은 테스트 중의 영상이라서 제대로 보여드리지 못했어요. 벤딩만 정리한 영상도 준비중입니다^^
@@bilimwoodworks 또 다른 장르라는 말이 맞는거 같습니다. 아루 돌리는 것도 신기했는데 정말 밴딩은 다른 세계네요. 벤딩 정리한 영상도 기대하겠습니다 !
말루프도 그렇고 체어는 거의 GOD 입니다.~~한 수 배우고 싶습니다!
아휴 과찬이십니다. 감사합니다^^
멋지네요^^
감사합니다^^
Просто круто!
Спасибо!
이쁩니다 ^^
도현아빠님^^ 감사합니다.
Hi there - lovely chair. What is the drill jig that you have used to get the correct angle to drill the legs into the seat? Thanks again, James
Good evening. Could you list the whole process of bending please? Was the wood before bending kiln dried?
멋지십니다. 마감 오일은 어떤건지요?
오스모 포릭스 (유광 3011)입니다 ^^
Hello Bi Lim. I also make chairs like you. Could you help me to know where your reamer tool is purchased. I'm from VN
www.amazon.com/Yankee-Automotive-Repair-Reamer-0-5000/dp/B00UHFXUGE/ref=sr_1_5?dchild=1&keywords=yankee+taper+reamer&qid=1598625354&sr=8-5www.amazon.com/Drill-America-Joint-Taper-Reamer/dp/B07NDBLSZ9/ref=pd_sbs_328_1/143-4226299-6192054?_encoding=UTF8&pd_rd_i=B07NDBLSZ9&pd_rd_r=8c642de0-9142-4acd-809c-870de5f20ae3&pd_rd_w=UVdbs&pd_rd_wg=ZCW9k&pf_rd_p=703f3758-d945-4136-8df6-a43d19d750d1&pf_rd_r=7CQK9387MWC2ED3RRF9X&psc=1&refRID=7CQK9387MWC2ED3RRF9X
Mine is yankee 5inch long. but I can find it. there is only 3inch.I think 5inch is good. because of taper degree.
@@bilimwoodworks Thanks you so much
Beautifully done, sir. Thank you for sharing.
4:35 - There's a lot of high difficulty woodworking here - but this is the one that would stress me out the most - one slip and you're back to square one!
Yes.
It takes a lot of focus.
Great chair! I like to notice the changes in technique from each of your chairs to the next.
I'm glad it helped:)
아 역시 제취향엔 루프백이 원탑이네요. 아름답습니다.
욷은님. 1등! ㅋㅋ
깨알같은 해빙기 ㄷㄷㄷ 락클러 두대로 빡세게 굴리다가 깨달음 얻고 갑니다 엄지척
저는 락클러가 빨리 고장나는 바람에 해빙기를 구입했지요 ㅎㅎ
락클러가 주전자라면, 해빙기는 전기주전자입니다. 얼릉 업글하세요^^
멋진 영상 멋진 의자..^^
고오맙습니다. 유튜브 컴백 기다립니다.
벤딩을 저렇게 하는거였군요. 의자도 멋있고 만드는 모습도 너무 멋있으세요. 맨날 직사각형 형태의 가구만 보다 밴딩하는걸 보니 너무 멋있네요
TAA 66 벤딩은 목공 속의 또다른 장르인것 같습니다. 영상속 벤딩은 테스트 중의 영상이라서 제대로 보여드리지 못했어요. 벤딩만 정리한 영상도 준비중입니다^^
@@bilimwoodworks 또 다른 장르라는 말이 맞는거 같습니다. 아루 돌리는 것도 신기했는데 정말 밴딩은 다른 세계네요. 벤딩 정리한 영상도 기대하겠습니다 !
말루프도 그렇고 체어는 거의 GOD 입니다.~~한 수 배우고 싶습니다!
아휴 과찬이십니다. 감사합니다^^
멋지네요^^
감사합니다^^
Просто круто!
Спасибо!
이쁩니다 ^^
도현아빠님^^ 감사합니다.
Hi there - lovely chair. What is the drill jig that you have used to get the correct angle to drill the legs into the seat? Thanks again, James
Good evening. Could you list the whole process of bending please? Was the wood before bending kiln dried?
멋지십니다.
마감 오일은 어떤건지요?
오스모 포릭스 (유광 3011)입니다 ^^
Hello Bi Lim. I also make chairs like you. Could you help me to know where your reamer tool is purchased. I'm from VN
www.amazon.com/Yankee-Automotive-Repair-Reamer-0-5000/dp/B00UHFXUGE/ref=sr_1_5?dchild=1&keywords=yankee+taper+reamer&qid=1598625354&sr=8-5
www.amazon.com/Drill-America-Joint-Taper-Reamer/dp/B07NDBLSZ9/ref=pd_sbs_328_1/143-4226299-6192054?_encoding=UTF8&pd_rd_i=B07NDBLSZ9&pd_rd_r=8c642de0-9142-4acd-809c-870de5f20ae3&pd_rd_w=UVdbs&pd_rd_wg=ZCW9k&pf_rd_p=703f3758-d945-4136-8df6-a43d19d750d1&pf_rd_r=7CQK9387MWC2ED3RRF9X&psc=1&refRID=7CQK9387MWC2ED3RRF9X
Mine is yankee 5inch long. but I can find it. there is only 3inch.
I think 5inch is good. because of taper degree.
@@bilimwoodworks Thanks you so much