6g Pipe Welding Test - Tips for Root Pass
Вставка
- Опубліковано 25 сер 2024
- weldmongerstor...
Tips that might just help you pass a 6g pipe welding test. this video is about the root pass and tips for using the "lay wire" technique. there are definitely other ways that work but this is one technique that has worked for me.
10 years ago... I watched this when it first came out while I was in welding school. These videos helped me a ton. Thank you for your hard work all these years.
i want to personally thank you for doing all of these welding videos, they have helped me a lot. im 18 straight out of high school and i just passed my first weld test for structural MIG welding and i got the job. Thank you and please keep doing these videos. if you could do a video on thick steel MIG welding i would greatly appreciate it. THANKS!!!!
HEY, PRO :) I AM A TIG AND STICK PIPE WELDER AND I CAN SAY THAT THE TIG FINGER AND A COMFORTABLE TORCH ARE THE ANSWER FOR A PERFECT WELD :) TWISTING TORCHES ALLOW ME TO WELD EVENT AT HARD TO REACH PLACES. AND YOUR TIG FINGER WORKS GREAT. KEEP SHARING VIDEOS, PRO... GREETINGS FROM BULGARIA :)
Jody, Never be ashamed of the "commercials". You are worth every bit of them!
Great job on this weeks video!
Every time that Jody puts out a new video, I learn something new. There are jewels of information throughout each video.
I am not a welder by any stretch of the imagination, but with each video, I am learning more and more. As a retired mechanical engineer, these videos make me want to take some welding courses....why....because I can.... :) One should never stop learning, Keep up the great work Jody!!!
Richard
yes that is a leatherman tool. I keep it close all the time. snipping wire, cutting stuff, opening packages, and an occasional beer too.
Hello. Am new to your channel. You have good advice. Ty. I am a 65 yr old ex-gal welder. I was taught in welding school in 1988, to start your welds in an "out of position" position, so that by the time you end it, you can end your weld properly, with less chance of repair. Like grinding out porosity created from bad starts and stops because of fighting for a comfortable position in the end. It creates less tension. And we all know... tension is not your friend when welding. :-)
What a great overview. People usually skip the planning part which indeed saves a lot of time. love from india🇮🇳
Jody. Great tig root talk and walk
I am an old General dynamics EB electric boat welder always can learn new things
You do a great job
Like you Jody I am still welding after 40 years and learning new things from you
USN retired Vet
I have a couple of vacuum tank welds coming up in the next few weeks, nothing that will be inspected, but nothing I don't want to be as good as it can be- this is great information on the technique for a pipe. Thanks so much for sharing!
I ordered these things to specifications. and yes after a while you can pretty much eyeball and tell within 5 degress...but I did put a protractor on it to check it....and 37.5 deg angle is specified by asme section IX code book for welder qualification.
I'm a rank beginner but I've found your videos immensely helpful, even the ones on techniques I'll likely never use.Watching you videos I'm itching to get a real welder like the Everlast. Thanks ever so much for all the knowledge and effort you put into these videos.
IF YOU WANT TO GET A REAL WELDING MACHINE LOOK INTO A CK MT 200.THEIR MADE BY THE SAME COMPANY THAT MAKES TIG TORCHES,CK WORLDWIDE.JODY SELLS THEM HOOK UP WITH HIM.
One major thought that has helped me pass many (all) Nuke sites is to Stay on the wire. Some said that they had suck back after the hot pass. This is most likely due to hitting the bevel too much and of coarse staying to long in that spot. I walk the cup and as long as I keep the tungsten pointed on the wire, it comes out smooth a piece of glass. I which You Tube was available in my day. My man did an excellent job in this Look See!!!
what do you mean to "stay on the wire?" i'm sure that has something to do with the filler rod but not familiar with the term since I am just a student learning how to weld. ( I am pretty much forced to teach myself since my instructor sucks. he is rarely around and mostly spends time looking at his phone. I also don't know what "hitting the bevel too much is." please explain if you could be so kind.
in order to fully penetrate and leave a smooth weld on the inside. also, the pipe welding codes call for a gap.
What size cup were you using
Thanks for the video, from Colombia, the good tig welding technique with good work quality.
Thanks to you I passed both of my certifications!
Sir respect your efforts here BUT! here in Philippines your this accomplished of yours cannot pass the standard of our testing qualifications. Thanks sir God bless you.
Man, I wish this video was published when I was doing my TIG pipe stuff. Excellent stuff as always.
The person that tested me on my first tig root 30 years ago made push the root out like that . I did it a little different than you I walked the cup ,and made are tight weave . Like what you show you are an excellent welder . I am also a cwi it really bugs me when testers try to go a little farther than the code . The first weld I inspected looked real good . The person in charge of the R stamp said to alow no undercut but the code alows some.
This video just passed 100000 views today Thanks to everyone who helped make that possible
This man makes it look easy I want to be like him one day
If you learn the cup walking Technic, your inside weld would be like a machine. I orbital GTAW as well. Once you get the perimeter set right its awesome. The Technic above's difference is the free handed feeding style, almost. I lay the wire to the contour of the pipe and not feed it but weave over it directly in the center of the wire just as above but allowing the cup to guide the welding time and direction. When I seen it done by the orbital process it verified this method for me. My timing,as mentioned above, is much faster with the cup to keep the consistency.
Super video
Find the videos for me teaching, because I myself have done a welding training.
The root seam looks great, good when you can weld right and left. I am a right-winger, one could "bend" around a root in a pipe to weld.
Greetings from Germany.
In welding school on 6G pipe now. I weave and have good success with it most times, but have problems with a below flush root in some places. The locations are inconsistent, but my technique is seemingly consistent. The pipe is donations from the local shipyard. It's pre-beveled and is the same coupons they use on their testing. May give this technique a try to see if it helps.
How in the hell are there close to to 300 dislikes in this video ??? This is UA-cam platinum!!!!
Chines troll farm maybe
Wow Jody. Great job on the videos this past few weeks. I recently passed the D.1 overhead test and the 6g 2inch pipe tig root stick all out in the same day.
i love the length of the video Jody, you should keep them around this long
Damn Jody. You should make a contest to all your viewers. Best 6G six inches test root wins a tig finger!
Can't wait to try this tomorrow at the Hall... thanks!
seems to be a thing in Australia...
"Certificate No. 8G - Gas Metal-Arc Welding (GMAW) of plate and pipe "
this is really good stuff. I learned to weld many years ago with my dad stick welding. now I mostly do tig because the parts I make are all done in .063 aluminum. I am starting to look into certification so I can apply for an actual job and "weld" it to my home shop work, which includes milling, and welding proton guns for unlicensed nuclear accelerators. I want to be very familiar with the whole testing process because being under unnecessary pressure can't be beneficial to the task you're trying to perform successfully.
Jody when I grow up, I want to be like you !!!! you are the best!!!!
Thanks for sharing. I busted on my last schedule 120-6" 6G pipe test. It sucked! I drove 5 hours to get to the place and the welding equipment they provided was JUNK! They wouldn't provide any help, tools or even answer any questions. l had to do three sample coupons. Frist one was TIG root and hot pass with TIG filler and cap. Second was TIG root and hot pass with 7018 filler and cap. Third was 6011 root and hot pass with 7018 filler and cap. Luckily I had brought all my own grinders and stuff I needed. I used my own TIG torch and electrode stinger... their stuff was broken junk! Anyways, it took me 9 and ahalf hours to complete everything. My welds looked okay, so the inspectors did not run me off. They cut my first coupon up and set the first test sample in the bender and as I watched... it CRACKED!!! And that was it. See you later and down to road I went. That company was Kiewitt located in Corpus Christi Texas. I have a 6" schedule 80, 6G pipe welding test on Monday. It's 6011 root and hot pass, 7018 fill and cap. Hopefully I can pass this test for the job. I haven't welded on a single pipe since I busted at Kiewitt back in May 2013. So it's been 4 years since I have scratched an arc on any pipe... God have mercy on me for ALL of my past welding sins!!! LOL. :D
I worked on this for a whole semester doing the root pass with 6010. Totally blew it.
Tank, I need an upload on how to pipe weld like Jody. 😂
Hi KRS 1, you answered your own question at the end of the statement about "hitting the bevel too much", by doing that you create suck-back or flattening of the weld inside. The instructor in the video mentioned travel speed also so you need to pay attention to your speed which is fast but not rapid and keep your torch on the wire, in the center if possible as you Walk the Cup. In other words don't race past your puddle which may cause too large of a keyhole. My method is using what is called "Walking The Cup". Look up a few You Tubes on this. If we have a heavy item and want to move it we walk it left to right till its in place. Walking the cup is like that too, we walk the torch cup as if on its heel left and right but again in tig welding we need to find the comfortable speed. If we stay in the weld to long it will suck back. Temperature is key also, not to hot not to cold, very important. After your root pass then you can cut it up a couple of AMPs, not much though.
I didn't answer my own question because I said, " I also don't know what "hitting the bevel too much is." How is that answering my own question? I still don't know what that means. you say it creates suckback, but what is it? do you mean when you're walking the cup on the root and not progressing that fast and just staying in one spot a bit too long? can't think of anything else you might be talking about.
hello
hello
hello
That fit up was incredible
exactly how i weld my 6g! good video!!!
Up until my last job I have always beck fed the bottom and keyholed the top. I was laid off in NC so I went to a nuke plant in GA and laid my best root. It was slick. Basically a perfect 3/32 wedding band but they did not like 3/32 reinforcement. Too heavy. I was stressing out to put it lightly. Had one baby girl and a son on the way and not much $ in the bank. They gave me a second shot and I'd never used this technique but having seen this vid I gave it my best and passed both coupons. I would say if you have any skills you have to be drunk to screw this up. It is so easy.
This is a test I need to do ASAP . It’s $1000 and has only a 20% success rate according to the instructor . Wouldnt stepping the torch back and fourth cause pin holes? That’s what I’ve been told
yes, we do ship to Sweden
I think you did a real good job Joe
great job, I'd love to see more 6G tig stuff from you.
Just failed my b pressure test with tig root… I’m only a 2nd year, but I feel so defeated. 4 weeks of practice and failed for the first time. Have one more chance to get my c pressure ticket but hard to stay motivated.
Thanks Jody for another one. Since we are making requests if u can ever do a d1.1 3G on one inch plates that would be sweet. I failed that damn test last week.
Why do you leave a gap between the two pipe ends? Why do you not "butt them together" to make the join? I'm not a welder (you guessed, right!) but I do simple repair and maintenance "farm" type welding and I find your videos really interesting and informative. Thanks if you have time to answer.
How to do this with pipe diam. 80 sm and with the not stable gap about 3-4.5 mm? This is the problem especially on the bottom.
Hey Jody, can give us some, "Do's and Don'ts", tips on how to prep pipe and plate, to get ready to take a test?
Nice job, sound advice. Excellent vid.
Keep up the awesome work. I learn something new on almost every video. I can sit though a few commercials ;-)
Thank you for youre work and videos Mister...Hurry up! From Belgium...
I graduated with five certifications and aluminum tig being my forte'. Love it!! Was wondering, though, I'm looking to buy a new tig welder and am not sure what to buy. They've changed alot. Would you happen to have any advice on a good efficient welder that won't cost me an arm and a leg? One with a "foot " peddle? Has to do aluminum as well as other metals and run hot. If not, that's ok. I thank you anyway. Love your channel! Ty.
Thank you your a great help I love your advice and videos . Appreciate it
congrats on your certs. that was a long day eh?
What kind of grinder is that that you first used? I've been looking for one like that
Staying on the wire means not breaking the walls of the bevel down at all. As you move your cup lef and right ,stay in the weld as shown above. He does not touch the walls of the bevel at all, he stays on the WIRE
You make great videos for TIG guys, would love to see more DC Stick videos. :-)
Where I test they make you run a good size tack holding your test pipe to your holding arm and then they come in and stamp your tack so they know it hasn't been moved.
Hello all. I am an electric welder for 6g pipes, ten years ago from Egypt. I would like to work abroad. We do not differ in wages according to your evaluation. Thank you.
3/16 gap works best for me...regardless of pipe size. I use a 1/8th wire.
6:00 Who doesn’t have back trouble 😢
Hi, Love your instructional vids,,,I have a question regarding the stick welding or fill up
of a joint.?.Wondering if you may have any tips regarding how not to get porosity on the overhead when using 7018 low hydrogen electrodes..Seems that I have experienced this many times over the years..Just seems to occur on the overhead like when you strike up your arc on a test comming off the six o'clock position. Not a good thing when doing the two inch test in particular..I've tried numerous methods but occaisionally still get porosity down there. I have taken into consideration rod angle, amperage settings, the surroundings like if there is a breeze, even magnetism of the fixtures that the coupon is attached to..checked out the electrode batch numbers and rod oven heat settings..The only thing I could contribute to this problem was the fact that the gasious shield that is formed when the electrode burns is heavier than air and thus drifts away from the weld puddle due to natural gravity..Any suggestions welcomed....Thank you Dber..
Shove the rod up into the puddle, alot of times a small deviation in the amount of arc lenght will give you porosity, so try burying it an see if that helps
At 7:54 i assume you were kneeling to weld at the 6 O clock position. Might be obvious to others but for newbies its an important matter to see how you get correct posture as without that you cannot do a good weld in the first place. I think there should be more emphasis on this point in youtube videos in general and not just yours. Thanks for great training. Mike
You are an artists .thank you.
What did ya do with your 1/8 wire spacers? I still mine in my work bag after watching your video with that little tip in it. Thanks again for another great video
My welding teacher made everyone learn to weld with both hands said out in the field you my have to use the other hand. I am left handed and learned all my life doing right handed so no problem
Is there a amperage difference going from layin the wire to keyhole method?
WAOO NICE VIDEOS BOSS
I AM FROM INDIA
I AM IMPRESSED TO WELDING VERY NICE DOING WELD
Jody, love your vids man, and thanks BTW. But please can you use metric measurements as well- the only 2 countries still using Imperial are the US and Burma...
your an awesome welder!!!
You teach very well! I also am a welder. You have great technique.
but I noticed your bottom half of the root pass looked concave Am I wrong?
I like to use Aluminum rod because it is easier to pull it back out
Place can i know about the argon welding plant welding voltage 120 for or not for 6g welding
Do you see any key hole using this laywire technique on the root. Anyone have the answer ???
Jodi, any tips for stick welding a stainless steel gas tank?
I'm building one from 1.5mm sheet metal with 2.5mm sticks.
thanks
muchas grasias a este gran samaritano me ayudado mucho sus video lo felizitoo
Hello, Student welder here, just getting into a little bit of pipe now. When you say your using 120A for your root pass, are you %100 down on your pedal, using all 120A or are you closer to using 90A?
Jody, your amazing Bud!
Does the amperage apply to 4” sch 40?
Iam a pipeline welder I love this
Stephen Amadi puto.pipe line haha
What do you use for beveling/how do you get it so pristine looking, also what kind of setup do you use for recording weld shots ie do you just put a filter lens in front or do you use a special type of camera?
Hey Jody,
Great videos, been a shop fabricator for over 30 year's and am currently looking for work. I keep running into add's for 8g certified welder's. could you explain what this test consist's of. Thanx
Penetration not enough should be 1.6 mm correct if I m wrong
what do u use for beveling? can u make a video on differant techniques, and tool u use. angled torch, plasma, grinding or do u have a pipe beveler?
questions from a beginer. When you go take the test, do they assigne for you what your going to use? or do they just test you on all three? ( stick, mig, and the one you are doing). Can you also use your own machine or you have to use their own machine? thanks in advance.
REAL PROFESSIONAL!!!
Im a tig welder and it has been a 10months till i last welded with gap that required the root and reinforcment on inside...i welded the stainless steel tanks and pipe that only required no root only full one pass...but now they are asking from me to do 45°degree angle weld (6g) with root reinforcment and i have tryied today and it doesnt go out,even though i keep the wire inside and go left to wright...what is your tip for me,and how to make a small ring on the inside like a 1mm of all around?
no e visto la primera prueba que no leden vueta al tubo hacy es muy facy cualquier principiante lo logra
Love your videos, have you done a 6g schedule 10 ss video yet? I can't seem to find it if you have. I'm having issues with my ss roots coming out way too flat.
Do you have a video on tiging a5g root
Hi jody ,on min 7.17 is that a leatherman multitool on the table !!! For what do you using it for , tigfinger great invantion.severino belgium
Hello we use a E6010 3.2 for the root Do you have any idea or tips for us about the AMB and the movement. Thanks
very nice tip's buddy keep up...
Es posible traducirla a español sol de colombia soldador calicado gracuas
What called that stuff in your handgloves?.the white small one?anyone??
I was wondering how far of a gap should you have between your tacks?
Thanks for share
What heat are you using
Whats size cup head do you recommend for root
i have a combination test of tig/SMAW to do, please i need more info on how to go about it,, thanks,
What kind of welding LENS did you used.? Thanks
requested information in order to adjust the machine to the material to be welded agree amps, voltage, and choose gas welding material handling also can fit the torch movements welding position.
Thank you.
Hello sir am a welder i don't have a job pleas can you just help me please for anything like money i don't have food to eat just help me