Definitely would like to see more about the 7-in dash And what it's capabilities are. Would love to know if the IO set up on it can be viewed in the internal logger of the HPECU without having to do two separate things. Would also be awesome if there's a way to make the 7-inch dash a shift light
Thanks for this video, I am about to install a Terminator X and a 7" dash and the I O information would be helpful as well as any other information you could give.
Do you know of a way to get the 7” dash to recognize a flash drive? Been through 5 or 6 of them and I’m reading everywhere it’s a formatting issue with certain flash drives and don’t know what to format it to.
I don't know if you read the comments or not but my 12.3 with V3 Terminator X sees the thumb drive and it attempts to update the dash but it never takes. It shows the eject button and even blinks the light on the thumb drive and I can see "updating to 6.0.236"scroll across but after it reboots its still on the old firmware. I called tech support and posted on the forums to no avail.
Will the dash input a pressure sensor and send through CAN to be seen in a log same as a simple switch? If so this can save someone lots of money and get a killer dash in the process. Thanks bud for the great video and knowledge.
Yes! You can absolutely use a pressure sensor. I only showed a switch because it was easy to setup at my desk. Any of the inputs can be sent to the ecu to be logged
@@highperformanceconsulting7616 awesome buddy thanks again for all your info. Please send me a PayPal so I can throw ya a little bit for the knowledge and I may need a little bit of help if I get snagged up later. Thanks scottyprochassis@gmail.com
great easy to follow tutorial. It was a simple thing but unclear exactly from holley. Thanks!
Definitely would like to see more about the 7-in dash And what it's capabilities are. Would love to know if the IO set up on it can be viewed in the internal logger of the HPECU without having to do two separate things. Would also be awesome if there's a way to make the 7-inch dash a shift light
Noted!
Thanks for this video, I am about to install a Terminator X and a 7" dash and the I O information would be helpful as well as any other information you could give.
Thanks for the video. I enjoy the tuning videos, but ones like this every now and then are good too. 👍
Thanks for the feedback
Yes a video of how to start a data log through the prodash on an LS terminator X would be greatly appreciated thanks!
Very informative video!
Can you tell me how to get my boost to be displayed as psi instead of kpa and also can traction control be done on Terminator x?
I could use all the info I can get on the 7" with the Super Sniper combo
Do you know of a way to get the 7” dash to recognize a flash drive? Been through 5 or 6 of them and I’m reading everywhere it’s a formatting issue with certain flash drives and don’t know what to format it to.
Very well done. Clear easy to follow.
Thank you
Nice short video with no bs just the info!!
That’s what I try to do!
Thank you for posting this video
I don't know if you read the comments or not but my 12.3 with V3 Terminator X sees the thumb drive and it attempts to update the dash but it never takes. It shows the eject button and even blinks the light on the thumb drive and I can see "updating to 6.0.236"scroll across but after it reboots its still on the old firmware. I called tech support and posted on the forums to no avail.
Did you get this fixed. I’ve got the same problem
@@tmayhew yes the latest patch fixed it. 249 I think it was
Which one to go with 7" or 6.86?
Will the dash input a pressure sensor and send through CAN to be seen in a log same as a simple switch? If so this can save someone lots of money and get a killer dash in the process. Thanks bud for the great video and knowledge.
Yes! You can absolutely use a pressure sensor. I only showed a switch because it was easy to setup at my desk.
Any of the inputs can be sent to the ecu to be logged
@@highperformanceconsulting7616 awesome buddy thanks again for all your info. Please send me a PayPal so I can throw ya a little bit for the knowledge and I may need a little bit of help if I get snagged up later. Thanks scottyprochassis@gmail.com
Email sent
Definitely more pro dash content!
Anything specific you want to see?
@@highperformanceconsulting7616 6.86 and terminator communications
I'm looking to update my 3.5 from v4 to v5 would I use the same steps thank you in advance great video also by the way
Thank you, the 3.5 is a different process. It is still simple but this video does not cover it. I will add a video on it to my list.
Where do you find the files to update 7" digital dash to v6 version
Do you mean more specifically than I showed at 40 seconds? I guess I don’t understand the question.
Wrong!!! My dash has NEVER shown a eject in the bottom right.
Then you’ve never had a usb stick plugged in and recognized by the dash.
Thanks man.
My pleasure