Це відео не доступне.
Перепрошуємо.
Decanting and Airbrushing Tamiya Spray Cans
Вставка
- Опубліковано 16 чер 2020
- Tamiya Primers www.umpretail....
Thinners www.umpretail....
Products I use in my videos can be found following this link
intscalemodell...
Feel free to ask any questions and/or leave any comments on the uploaded video and don't forget to like the video :)
Don't forget our live shows, every Friday from 7:30pm Uk time live on this channel :)
Links can be found below:
Join our friendly forum here www.intscalemod...
Our Facebook page here www.facebook.c...
Ultimate Modelling Products can be found here www.umpretail.com
The live at the bench group
/ 120548821977514
The Off Air Hangouts group
/ 1101894376662686
My Facebook Modelling page Paul-ISM
/ thebenchwithpaul
My Instagram paul_ism #international scale modeller
"Music: www.bensound.com"
Great tutorial, I will definitely be giving this a try!!
Fantastic tutorial! 😊 It helped me a lot with my first ever project ( even done a video) ! I needed to decant TS-8 and there were no issues along the way! Decanting was the part of preparation proces that I was afraid most. As I have never worked with airbrush I didn't know how much thinner should I add (if any?) but thanks to your video I was able to find the right ratio! Thanks! 😀
I love how these contain 2 marble balls for mixing instead of the typical 1 ball xD recycled a can of this today for free sheet metal not much bit for small washer/mounts fabs it'll do!
Another great tip. Thank you! I use mostly airbrush paints and clear (splash) but have always stayed true to Tamiya Primer.. love the stuff. Looks like it’s time to decant it!
Yep works alot better imo - Paul
Paul your whole channel is a free tutorial. Keep up the good work. I miss my old neighborhood model shop and this channel is the next best thing.
Thanks, will do!
Hi Paul,
I expect a lot of people do this, that is clean the straw with a pipe cleaner dipped in
lacquer thinners. Thought it might help someone who is new to modelling. I have used the same straw for decanting for a year or two. ( Tight begger ) Cleans it perfectly, no matter what colour. Thanks for an interesting video.
No problem, I just find it easier to throw them away, wasteful I know but hey - Paul :)
Paul, Tamiya sells there Grey & White primers in bottles ready to thin and spray. The bottled primers are far more economical than their canned primers. Have you tried them yet???
No because you cannot get them readily in the uk - Paul :)
Thank you for this I have to try this thank's
Another great video tutorial on a subject I would like to try but have avoided due to lack of detailed instructions until now. Thank-you for sharing your knowledge.
Glad it was helpful!
Thank you. I was wondering what to do with my spray cans now that I've added an airbrush to my bench.
Another primer for me to try. Might stick to the overnight/24 hours though just to make sure. Thanks for the update vid Paul.
No problem 👍 Cheers buddy
Good vid. Techniques are always changing and an update/refresh is always worth doing. Cheers and thanks for sharing.
Cheers buddy, thanks for watching - Paul
Well... Few things become much clearer for me now. I recently tried to decan TS-55 and closed it in a bottle just after the process. It almost exploded with bubbles, when I tried to put it in airbrush a bit later. Very helpfull video, thx a lot Paul.
Glad it helped- Paul :)
Thanks Paul. great vid. Handy for the AS aircraft colours.
Glad you enjoyed it
Paul, thanks for your wisdom, knowledge and videos. Super helpful as always. 🙏
My pleasure - Thanks for watching - Paul :)
Paul, you are selfless and have a golden heart. Thats all i will say.
Cheers buddy :)
Great video Paul. I decant a lot, so many great colors I’m rattle cans and gives me more options for my car builds.
Thanks 👍 yes great colours in the ts range, check out the lp range too very good pants very similar - Paul
Excellent and very informative thanks
good work, this solved exactly my problem facing with
Nice tip. I have a set of track to paint, going to give your technique a try.
Go for it! cheers - Paul
Just a quick thanks.. my airbrush hasn't been good for months, followed your cleaning guide and it's like new. Making models is fun again... Cheers Paul... Next stop evil photo etch :(
Excellent glad it helped - Paul :)
Good lesson. I get the outgas advice, but I’ve had success decanting straight into my airbrush cup. The paint bubbles in the cup, but seems to spray just fine.
Yeah im happy to let it off gas for safety
Can you get a new color if you spray a certain TS paint over a different one on a piece? I'm thinking about spraying TS 93 on top of TS57
Another question ✋ can also do this on all primer spray cans thank you
Primed my first model kit today. Was very surprised to empty a full can of Tamiya primer on it. So much waste. Will definitely use this technique to save some in the future.
Yes you get a lot of wasted overspray from the can, much better to decant . thanks for watching - Paul :)
Great video Paul, thanks for the information 👍
Glad you enjoyed it
Can i sealed now the paint jar after 2days of releasing propellant
Yes you should be fine now
Hey Paul just a small question on Tamiya LP paint what is the best airbrush cleaner to use?
General lacquer thinner as I use in this video, you can find a link in my products list in the video description
Thank you Paul good update
Glad you enjoyed it, cheers _ Paul :)
This is really helpful, thanks. I have been using Tamiya Surface Primer from the rattle can on my Bandai models which work well but I would prefer to airbrush it, not least because you probably get more economical paint coverage. Can I use the same technique for spraying TS-13 (Gloss Clear) and TS-80 (Flat Clear)? Again it would give me more control and I always feel like most of the spray is disappearing around the model in a big cloud! incidentally I use Vallejo Model Air colours for the paint coats.
Any thoughts on airbrushing TS-13 and TS-80 Paul?
Same way, just with the clears spray very fine mist coats if you have decals as to not melt them
Yes it helps alot :)
Very good information. Thank you
Glad it was helpful!
Paul would you do the same with the TS spray cans ?
Yes exactly the same
Can the Tamiya primers and AS range be decanted and stored into plastic dropper bottles or is glass the safest?
I would stick with glass for long term storage
Hello sir,can i also decant tamiya spray top coats..thank for the reply☺️
Hi Paul.. love your channel and your work. I cannot use 2 pack clear coat because i'm in the house.. What is a great alternative clear coat please. And what Respirator is suitable for airbrushing please.
Hey Steve, tamiya Lp9 or mr hobby gx100 but they both smell, alclad aquagloss al600 doesn't though but needs more work to get a shine
Very helpful. Thanks.
Glad it was helpful!
Hi, I’m looking to decant TS-17 (gloss aluminum) to airbrush a P-51 build. I understand this paint is thin. Would you recommend using the Leveling Thinner? Ratio? TIA.
I'm just learning airbrushing, and have tons of spray cans. The cans say 100ml volume. I'm trying to figure out how much actual paint is in the can to know what size container to decant into. Like a jar with lid for storage. Can you offer any advice? Thank you so much for your videos!
Hi I tend to just decant what I need at that time and I would say you get about 60-70 ml of paint but you can thin it anot 10-15% giving you more
@@InternationalScaleModeller Thank you for the info.
Hello Paul great vid can I decant acrylic paint the same way
If it’s a spray can yes mate
Hey Paul, thanks for showing this tip.......very helpful sir, speak to u soon & stay safe.
Thanks, you too!
Hi Paul, how much actual primer do you reckon you get out of a 180ml can?
About 80ml roughly
@@InternationalScaleModeller Paul, many thanks. Very helpful as always.
Hi Paul - love all the videos. Looking for an Airbrush with a suitable needle (size). I do Tamiya cars and bikes and use Tamiya TS Sprays but want to get into Airbrushing. Can you please recommend a suitable (good) Airbrush and needle. I want a good quality one like you use, so if I get poor results I know its me!! Also, what compressor would you recommend. Keep up the good work.....Many thanks Phil
Hi Phil, all I use is our Ultimate Apex airbrush. You can get it from us at www.umpretail.com, there's also a link in the description to all the products and tools I use in my videos you will find my compressor in there, thanks for watching - Paul :)
Have you any experience/advice for decanting from cans that have flat nozzles without boss to fit straw over.?
I've not sorry no maybe spray into a tall cup directly?
So if I use the decanted paint with a brush for some fine work on a lexn body, then what do I use to clean the brush? Yes I can buy some Tamiya sovlent, but what else will clean brushes that I have used with Tamya Polycarbonate PS spray paint. There's nothing really positive on the internet. What do you suggest?
Just cheap lacquer thinner will do
@@InternationalScaleModeller Thanks for amzingly quick rely, most helpful.
If you look on eBay you can get 5l for a approx £12 delivered
Hi Paul, I tried to decan the Tamiya primer because I like the airbrush more than the spray cans and everything went well. Got the primer in the plastic cup without any mess, but after an hour or so the plastic cup started to melt completely waisting all the paint. Any idea how that's possible?
It’ll be because your cup isn’t lacquer proof. Some of the cheaper shot glasses and medicine cups melt with lacquer. Get the proper medical grade ones they are not much more expensive
How long will paint last once decanted if I decanted to much ? Please Paul ?
I’ve done thats years old and still good. Glass bottles are better for storage
@@InternationalScaleModeller would I be better decanting straight into a glass bottle then but leave the lid off ? Cheers Paul
Yes always leave the lid off
@@InternationalScaleModeller ok, thanks Paul
nice update
Thanks mate - Paul
Good Stuff thanks
Glad you enjoyed it
Hi Paul,
How long does the paint normally last once decanted in a sealed container?
Im trying to kick up in the hobby a bit more, unfortunately i work away a lot.
Cheers
It should last years as long as properly sealed in a glass jar
@@InternationalScaleModeller
Legend,
Thank you for the response mate
Would you thin an acrylic primer, such as Stynlrez?
You can, but it gives inconsistent results. The best thinner i have found for acryl primers is illustration base for fabric airbrushing. It seems to have a slightly elastic nature to it.
You can but I wouldn't, sprayed right and with the right needle size .3 and bigger it should spray fine
which primers can I use with tamiya LP paints?
Any really as long as they are fully dry, I use Ultimate Modelling primer and this Tamiya primer, Cheers mate, thanks for watching - Paul :)
Is it normal for straw to get cold?
I think it's because it has butane and propellants in it
This is pretty common physical process. You just experienced how a refrigerator works ;-)
Yes as the guys below say :)
Has UMP primers been discontinued
steve177cal no not at all. We’re just waiting for a restock
@@InternationalScaleModeller Thanks for the reply.
Also... if i get black and white primer why not mix my own grey any shade i want to.
steve177cal yes you can
I personally think Tamiya LP paints stink worse than anything else I've sprayed but they are great to use.
They dont smell to bad to me- thanks for watching Paul :)
Use Aluminum tubes and just clean with thinner
You can do yes I find starts easier, Paul :)
Probably a stupid question: can tamiya acrylics be applied over tamiya spray primer?
Yes any paint can be :)
Cheers
@@InternationalScaleModeller can I thin the primer with white spirits after decanting it?
I don’t understand the purpose of decanting, why not just spray from the can?
Better control and much less waste.
Yes as replied below :)
))