Hope you and yours had a great 2nd Birthday celebration with your daughter. After watching your video, I decided to tie up the comments controversy. I grabbed my Wingshot II, a couple #8 shells, a good sized sheet of cardboard, and a tape measure. I put on my stovepipe hat and went out for a pattern test. I shot first at 15 yards and measured my shot spread, which was only 5 inches, and a really nice, tight cluster of shot. I moved the target down to 6 paces past my 25 yard tree (yes, I have a 25 yard tree) and took another shot. This one measured 14 inches, although if I eliminated the one pellet which flew extra wide, it would have been 12. Of interesting note, on the first shot, the center of the pattern was so tight that it left a 1/8 inch hole in the cardboard at the center.
@@eon2330they are made for bird hunting , rabbits etc soft skinned small game it's not supposed to have a lot of power for a shotshell, and the rifled barrel is messing up the performance bad
As always interesting and impressive video. I have learned a lot from your PCP videos and really like them as well. Great work. Beautiful Florida weather, great sights. Congrats hbd to your baby daughter. 🎂🎈🎉🎁
As someone else just mentioned, but should be restated, it would be good to try the shells that are using No. 6 shot instead of No. 8. Each individual pellet will be carrying a touch more mass.
The Wing Shot smooth bore shotgun-version of the Dragon Claw has a removable choke on the barrel, keeping the shot closer together for linger distances. Also, the shotshells with #6 shot should work better.
L'intro è SPETTACOLARE! Quel fucile farebbe la gioia incondizionata dei bracconieri qui, a giudicare dalla rosata non c'è cornacchia che scamperebbe al ruggito del dragon claw!! Con dei bbs più pesanti in cartuccia la rosata sarebbe più compatta e micidiale mi vien da pensare!
I like this weapon very much, but as it's designed to be leathal and isn't semiautomatic, it's has the downsides of N actual firearm, with only questionable effectiveness. You can literally own and travel with ANY .12 Guage shotgun ANYWHERE in the U.S.A., provided it's locked while in transit in a separate box or compartment from the shells and a trigger lock is installed, unless you are parked at which point, even California considers your car, if you're sleeping in it for the night is treated as your home. It gets a bit sticky in New Jersey as self defense with any weapon isn't allowed, but as a truck driver who used to have a Secret Level Security Clearance and routinely transported secret, classified and explosive freight for the DOD, my codriver and myself were issued a shotgun and instructed on its use and legal transport. We had no legal opportunity, latitude of deference that any other civilian traveling with the same weapon in any state for any purpose in any vehicle. Our company stopped having armed drivers and took back our weapons and ammunition, not because of legal changes,but because our drivers has to check their weapons and ammo with base security at all military instillations, the problem being, often drivers forgot to retrieve their weapons and ammo upon exiting the facilities.
PHAWK YEAH BROTHER !! 🥳 🎉 🪅 🎊 🍺 🍻 🥳 🎉 THAT AIRGUN IS SICK aF ×999⁹⁹ !! 😳🫡😳😳🫡😳Much love and respect from over here in North bay area Napa, California 🫡✌️☺️
I think the shot shows are pretty cool and they're pretty useful in the right scenario. Actually Daisy BB guns had come out either in the 50s or in the 60s with an air gun shotgun that shot little shot shells similar to the ones you were using.... You should really look into that hatsan Hydra some of the other hatsan products there is also air gun made by Seneca that is a lever action PCP and hats and makes a lever action PCP
Hatasan Vectis is one such rifle i currently own one in.25 i modded with a huma regulator,donny fl hushcan,added sling posts hawke scope and green laser underneath. That's my squirrely rifle 😂
@@terrylegend7669 no the gun actually fills very fast. In about 5 min or 10 mins, if completely empty. It’s the tank that takes for ever to fill up. In fact, for that I recommend going to a diving shop or anywhere that can fill your tank from a bigger tank…
As do I,modded my CAP ARMS and it is a MONSTER and soooo sexy looking. Im sorry to say the DC might be more powerful modded than the wingshot 2 modded,but the wingshot 2 LOOKS the part of a shot gun. JMO
Interesting but I think I'll stick with my Winchester model 12 in my Alaska bear country and also if I get back down to the Florida glades where I grew up.
Compressors for pcp rifles start at $180 not $300, almost all portable compressor are made by the same oem from China, so getting the cheapest fitting compressor is always the best choice. A portable compressor does need quite some maintenance and there are things you can do to keep it running for as long as possible like: letting the fan run for 3 to 5 minutes before and after turning on the compressor and starting the compressor with the bleed valve open and closing it slowly after 10 seconds. It’s also a good idea to use the inline filter in a vertical position and not a horizontal position.
It JUST broke! Literally yesterday! I was filling up a rifle and it started sounding like a dying diesel engine. Until it stopped. I have to say, it’s been a tractor. I’ve filled many guns and many bottles in extremely hot and humid conditions… so I actually recommend it. (Plus the price seemed to have dropped in half)
I look forward to your PCP videos as always you never fail to impress me thanks for sharing and congrats on your daughter's birthday I also have 3 kids with b'days in March cheers from Less Lethal SA 🇿🇦💪
Friend from the old world, Europe, 🇵🇹Portugal 🇵🇹 from the beautiful and beautiful city of Lisbon, to the new world America 🌎 to the sides of Miami ‼️❓I just came to give the channel a helping hand and say that I am very satisfied with the contents , honestly I think it's really the best channel in terms of tests, comparisons etc... Home Defense weapons and as you happened to buy the ammunition at the German Store HOMEDEFENCE-24 so it's the icing on the cake I see the tests on your channel and comparisons, then I already have an idea of what I'm going to buy... I also really like the items from the CODOCO Store I also follow Mr. from Norway Rune Rebel, Keep up the good work.. ‼️Abraço 🤗 Friend...
Good video. That baffle board with the ballistic bust was great a showing the power of the dragons claw. Anyway great video may God bless you and your family.
BTW, how do you change the oil of this compressor older 12v models because the compressor oil can not be changed via drain screw you have to open them and wipe them and put new VDL 100 oil otherwise oil become sticky like a gum and it brake the metal of the piston and you have to keep order new pistons. This was the case with 12v tuxing compressors.
Ironic you decided to discuss intro cost as I was getting ready to ask - thank you. Not sure what if anything those shells would be useful for - maybe small birds - could just be due to them being fired from the wrong type of gun?
Can you please review the dragonslayer airgun 50 cal from India m8? I’ve heard they use them to kill tigers! I’m a animal lover so I’d just like to see how powerful they are? A test on wood and roofing tiles and breeze blocks would be good! I’ve seen that you have to cast your own pellets that you can make solid and over 300 grams which seems a lot! Anyway please investigate! Brilliant work 👍👊🔥!
I really think you can make “ hollow points “ packed with gunpowder and seal them up and have explosive rounds! Anyway always safety first! I showed my friend my recipe for gunpowder and it’s more flammable than real gunpowder! Think I have a bit on a cotton earbud half a foot away and strike a lighter and it goes off from particles in the air! That stuff under pressure and packed is more than tnt! Easy! Anyway it’s late here and I’ll stay in touch with you my friend!🔥👊👍M!
@@AirgunAlley get a old fire extinguisher take out the refillable chamber out! It’s regulated at 9000 psi! You can easily use it for 3000-4000 psi shots and cut the spring down for more easy shots and then even drill the nozzle holes wider for larger dump of ? Air/ co2/ basically the old fire extinguisher used to have a pressure bar that was used to also put pressure back in! Like a bmx inner tube valve! For a styrup pump? They go to 3000 psi! Anyway it’s how you connect it to the barrel and reload? Maybe muzzle load! And paper wad! For pressure! But that’s over 780 psi if you can get it right and just a old fire extinguisher and a pump and paper and a ball bearing! Anyway I’d make it work for you if I was there! M❤️🔥👍!
@@AirgunAlley I believe that it’s a Indian brand gun m8! And you have to cast your own giant pellets! Pack them as hollow points with sulphur! At least red match heads! But be careful with red match heads! They can go off under pressure! I know a mixture of brown match heads one! And 2 and a half red! And make 2 grams up slowly gently grinding till you get purple powder! Then half gram cigarette ash for fusion of air and combustion! ! Here’s a good tip! Keep it all separate red match! Brown match and inert! Fag ash! It’s explosive if u mix it right!!! My friends hand is still burnt from 12 years ago !! M🔥👊
I'm not sure that air venture made all this stuff themself 🤔 like daystate with ther "own made" compressor they bought in China and put ther logo on it and told people made in UK but have forgotten to remove the made in China sticker befor sending them to the yt reviewers. 😂
Yea that dragon claw is a beast for sure. I think they should use bigger bbs in the slugs...maybe 60 instead of 120. They'd be heavier so they should cause more damage. You should look into getting a fill tank for your dragon claw so you don't have to run the compressor every time you want to shoot it. Great video as always my friend
Thank you so much man! I 100% agree on the shotshells needing bigger sized bbs! And yes indeed, I will absolutely be going to a dive shop to fill up my tank from now on. 45 mins for two or three refills is a lot! The gun however fills quite fast, with this one compressor. Thanks again my friend!
@@jrstoltzfus958hmmm I dunno. Good question. Maybe if you muzzle load them. But it could turn messy and I don’t know if the HDR 50 was the power for these to open and spread 🤔
Depends on where you live. Here in Florida you must be 16 years old. That’s literally the only restriction on air guns in this state. I don’t know other states’ regulations, vest to check locally
Greetings from the UK, just found your channel and working through your vids. We can only dream of guns like this over here, I'm just starting the long long process of applying for my Fire Arms Certificate, very strict laws over here. I love the Dragon Claw but these shot shells surprised me, I thought with the rifled barrel, the spread would be so much less, this is not really an alternative to a shotgun is it? Amazing rifle with the slugs, definitely need your own pump for this, nothing like the 300 plus shots I get per fill of my Kral Puncher 😂🤣 Regards Mick PS, just a thought, because of the huge size, I'm wondering if you could 3d print your own design slugs and other projectiles for a fun video?
Hi Mick, first off thank you so much for finding and enjoying my channel. Wishing you all the best for your certificate application, I’m sure you’ll get it in no time. I am completely in love with the Dragon Claw. I think these shotshells would be a lot better (and closer to a shotgun) if the bbs were a bit bigger and heavier. While they did make a big spread, I feel like their power was a bit weak. And funny you “requested” that - I actually made two videos with this rifle: one where I shoot the Devastators (made for the T4E series) and one where I shoot 3D printed saboted 308 bullets by an Italian brand called CODODO. They’re among my most recent videos. Thanks again for watching!!
@@AirgunAlley Thank you for your reply, I will check out those videos. It is such a cool looking gun........ I'm into more target focused shooting...... 10m Olympic style with air rifle n pistol and hopefully when I get my licence long range . 22 rifle but I just love watching stuff like this. I also like the fun way you put your videos across with another you..... Does your alter ego have a name? 🤣
Just my 2 cents worth here. I own a C.A.P. SHOT modified wingshot 2,it is a beast for sure. You can send your dragonclaw in to get modded,make a world of difference in power. Additionally,the shotshells if you have the money you can buy bismuth shot and fill empty shot shells. Bismuth is smaller and denser,but if you go this route you may need to mod your dragonclaw if it's stock. I'm currently enjoying 35 yard pass through on cardboard boxes with my wingshot using bismuth loaded shells,and a pretty spread,but if im turkey or bird hunting it is MORE than sufficient at closer range.
Well I understand you... If I lived close to the Everglades I would most likely get up every morning, taking a walk and enjoying the nature :D and shoot PCP rifles too... :D Great video as always :D Thank you for the great videos :D
Alright mate 👍 enjoy your daughters birthday 🎂. Don't mind watching PCP vids something different and that gun is one bit of kit .those shells at close range would hurt like hell would be picking them out of you for days .keep up the good work 👍
Want to buy a .22 Weihrauch HW44 with a bad oring? I'm not even going to attempt to take it apart to fix the leak and there's nobody in America that fixes German guns. When it works, it's a fine pistol.
Dove,squirrels,turkeys,have yet to shoot a duck with one here in Florida,but i also use bismuth shot in equivalence to #6 shot shells from air venturi. Its expensive to use but more pellets more spread.
@@AirgunAlley hello again man i remember a while back you said you sent your HDR to a guy to get it modded i need to do the same can you giveme a trust worthy guy and the version he works with 7.5 or the 11 jouls ?. Please message me back .
@@Bigonewsnetwork808 hey my friend! I wish I could share good news, but the guy is no longer available and I haven’t found anyone since, willing to do it “professionally”. Very sorry. At the moment I can only suggest video tutorials 🤷🏻♂️ good luck!!
Your videos are entertaining, not review. Keep them going plus pcps are entering a new Era with those power plenums so doesn't worth right now to get just avarage pcp couse 2 months later will be outdated either by some smart electronics like daystate or some ultimate budget and in same time powerfull and accurate like Hatsan Factor Sniper or BP or Reximex Meta with some huge aftermarket plenum.
A rifled barrel will make the shot spin causing it to significantly spread quicker than a smoothbore barrel therefore reducing the effective range but much depending on if that plastic cap holds the shot together in the barrel however in my experience with shot shells in rifles the pellets are already free in the barrel.Now the bigger the pellets the less disrupton.14c or 287 Kelvin warm for Mars!
The real problem was the pellets had no real power. They bounced off more than they penned. Weird thing is, each buckshot in a shotty is around normal pistol round. Not sure why people love "tight" groupings. You can only pen the same hole once and pellets bounce off each other if they are too close at impact vs bone/metals and such. Seems like you would want more spread than less. Unless you are sniping 100 yards.
Good Stuff....
Slugs for Long Range and Shotshells for Snakes.
Kaboom! 🙌🏼
And arrows don't forget arrows it can fire arrows made by Air Venturi 100 bucks for 6, and of course, you will have to buy broadheads for it
I ordered a couple hundred of those arrows cause I keep losing them on my ranch 😭 they work great on deer tho :) @@Dadolphinsmakemecry
Hope you and yours had a great 2nd Birthday celebration with your daughter.
After watching your video, I decided to tie up the comments controversy. I grabbed my Wingshot II, a couple #8 shells, a good sized sheet of cardboard, and a tape measure. I put on my stovepipe hat and went out for a pattern test.
I shot first at 15 yards and measured my shot spread, which was only 5 inches, and a really nice, tight cluster of shot. I moved the target down to 6 paces past my 25 yard tree (yes, I have a 25 yard tree) and took another shot. This one measured 14 inches, although if I eliminated the one pellet which flew extra wide, it would have been 12.
Of interesting note, on the first shot, the center of the pattern was so tight that it left a 1/8 inch hole in the cardboard at the center.
Always wondered about shot shells in a rifled barrel, so great to see them given the test. Thanks.
The problem was they have nearly 130 projectiles. The spread isn't the issue, its the force. They seem to be low power.
@@eon2330they are made for bird hunting , rabbits etc soft skinned small game it's not supposed to have a lot of power for a shotshell, and the rifled barrel is messing up the performance bad
As always interesting and impressive video. I have learned a lot from your PCP videos and really like them as well. Great work. Beautiful Florida weather, great sights. Congrats hbd to your baby daughter. 🎂🎈🎉🎁
Thanks you so much hermano from el norte!
As someone else just mentioned, but should be restated, it would be good to try the shells that are using No. 6 shot instead of No. 8. Each individual pellet will be carrying a touch more mass.
Or get the equivalent in bismuth shot like i did with my wingshot 2. It is denser but it is expensive.
The Wing Shot smooth bore shotgun-version of the Dragon Claw has a removable choke on the barrel, keeping the shot closer together for linger distances. Also, the shotshells with #6 shot should work better.
L'intro è SPETTACOLARE! Quel fucile farebbe la gioia incondizionata dei bracconieri qui, a giudicare dalla rosata non c'è cornacchia che scamperebbe al ruggito del dragon claw!! Con dei bbs più pesanti in cartuccia la rosata sarebbe più compatta e micidiale mi vien da pensare!
p.s.: io lo caricherei a sale grosso 🤣
Hispanics 4 Trump/DeSantis 2024🇺🇸🇲🇽🤠
Hahaha more like Trump VERSUS DeSantis 2024
Moron
@@AirgunAlley that facts honestly, hopefully descant is keeps Florida strong as gov though and runs in 4 years
More like desantis with trump as running mate
Just As silly as Gays voting for Trump/ DeSantis 🤦♂️
I like this weapon very much, but as it's designed to be leathal and isn't semiautomatic, it's has the downsides of N actual firearm, with only questionable effectiveness. You can literally own and travel with ANY .12 Guage shotgun ANYWHERE in the U.S.A., provided it's locked while in transit in a separate box or compartment from the shells and a trigger lock is installed, unless you are parked at which point, even California considers your car, if you're sleeping in it for the night is treated as your home. It gets a bit sticky in New Jersey as self defense with any weapon isn't allowed, but as a truck driver who used to have a Secret Level Security Clearance and routinely transported secret, classified and explosive freight for the DOD, my codriver and myself were issued a shotgun and instructed on its use and legal transport. We had no legal opportunity, latitude of deference that any other civilian traveling with the same weapon in any state for any purpose in any vehicle. Our company stopped having armed drivers and took back our weapons and ammunition, not because of legal changes,but because our drivers has to check their weapons and ammo with base security at all military instillations, the problem being, often drivers forgot to retrieve their weapons and ammo upon exiting the facilities.
Always have your pew pew higher than the compressor! Less moisture in the air chamber!
Good point! I also change the cotton filters before every fill. That also helps a lot!
PHAWK YEAH BROTHER !!
🥳 🎉 🪅 🎊 🍺 🍻 🥳 🎉
THAT AIRGUN IS SICK aF ×999⁹⁹ !! 😳🫡😳😳🫡😳Much love and respect from over here in North bay area Napa, California 🫡✌️☺️
Happy birthday to your daughter! May she be healthy at all times! 🎉
Amen
I think the shot shows are pretty cool and they're pretty useful in the right scenario. Actually Daisy BB guns had come out either in the 50s or in the 60s with an air gun shotgun that shot little shot shells similar to the ones you were using.... You should really look into that hatsan Hydra some of the other hatsan products there is also air gun made by Seneca that is a lever action PCP and hats and makes a lever action PCP
Hatasan Vectis is one such rifle i currently own one in.25 i modded with a huma regulator,donny fl hushcan,added sling posts hawke scope and green laser underneath. That's my squirrely rifle 😂
Cant wait to FLEE New Jersey with my wife in a couple of days to go live in sunny Florida & do some shooting😎
Hopefully you left the policies behind that caused you to come to my beloved state. Welcome to Florida.
I dig it!
Awesome Terry! It’s a fantastic rifle!
@@AirgunAlley I was thinking of getting one but the compressor takes long to fill the gun.
@@terrylegend7669 no the gun actually fills very fast. In about 5 min or 10 mins, if completely empty. It’s the tank that takes for ever to fill up. In fact, for that I recommend going to a diving shop or anywhere that can fill your tank from a bigger tank…
I have the Wingshot...very powerful air shotgun
Ooohhh I want that one too 🤤
As do I,modded my CAP ARMS and it is a MONSTER and soooo sexy looking. Im sorry to say the DC might be more powerful modded than the wingshot 2 modded,but the wingshot 2 LOOKS the part of a shot gun. JMO
Interesting but I think I'll stick with my Winchester model 12 in my Alaska bear country and also if I get back down to the Florida glades where I grew up.
🙌🏼
I like PCP guns but outside my budget 😢
Compressors for pcp rifles start at $180 not $300, almost all portable compressor are made by the same oem from China, so getting the cheapest fitting compressor is always the best choice.
A portable compressor does need quite some maintenance and there are things you can do to keep it running for as long as possible like: letting the fan run for 3 to 5 minutes before and after turning on the compressor and starting the compressor with the bleed valve open and closing it slowly after 10 seconds.
It’s also a good idea to use the inline filter in a vertical position and not a horizontal position.
Is that Vevor compressor holding up for you a year later?
It JUST broke! Literally yesterday! I was filling up a rifle and it started sounding like a dying diesel engine. Until it stopped.
I have to say, it’s been a tractor. I’ve filled many guns and many bottles in extremely hot and humid conditions… so I actually recommend it. (Plus the price seemed to have dropped in half)
I look forward to your PCP videos as always you never fail to impress me thanks for sharing and congrats on your daughter's birthday I also have 3 kids with b'days in March cheers from Less Lethal SA 🇿🇦💪
police currently have my PCP rifle :[
😢
This ammo is for BUG BLAST’IN at close range.
You should try .50 sabots and .45 slugs. Little faster little sheaper and sabots can often be reused.
Friend from the old world, Europe, 🇵🇹Portugal 🇵🇹 from the beautiful and beautiful city of Lisbon, to the new world America 🌎 to the sides of Miami ‼️❓I just came to give the channel a helping hand and say that I am very satisfied with the contents , honestly I think it's really the best channel in terms of tests, comparisons etc... Home Defense weapons and as you happened to buy the ammunition at the German Store HOMEDEFENCE-24 so it's the icing on the cake I see the tests on your channel and comparisons, then I already have an idea of what I'm going to buy... I also really like the items from the CODOCO Store I also follow Mr. from Norway Rune Rebel, Keep up the good work.. ‼️Abraço 🤗 Friend...
Good video. That baffle board with the ballistic bust was great a showing the power of the dragons claw. Anyway great video may God bless you and your family.
Many many happy birthday to ur daughter may god bless her always
Thank you so so much!! Blessing back at you 🙌🏼🙏🏽
Have you seen my Sig Sauer MPX videos bro? Awesome PCP bro! 😊😊
Niiice!!
Wonder how these would work in my tdr50
Good question! I need to check if they even fit. One thing is for sure, the soft aluminum tr50 barrel won’t be very happy with them…
How much the price of PCP Air compressor?
It’s funny, the seem to get cheaper by the day. I found one on Amazon now for 260$. The one I have, by Vevor, is around 400$
BTW, how do you change the oil of this compressor older 12v models because the compressor oil can not be changed via drain screw you have to open them and wipe them and put new VDL 100 oil otherwise oil become sticky like a gum and it brake the metal of the piston and you have to keep order new pistons. This was the case with 12v tuxing compressors.
Ironic you decided to discuss intro cost as I was getting ready to ask - thank you.
Not sure what if anything those shells would be useful for - maybe small birds - could just be due to them being fired from the wrong type of gun?
Can you please review the dragonslayer airgun 50 cal from India m8? I’ve heard they use them to kill tigers! I’m a animal lover so I’d just like to see how powerful they are? A test on wood and roofing tiles and breeze blocks would be good! I’ve seen that you have to cast your own pellets that you can make solid and over 300 grams which seems a lot! Anyway please investigate! Brilliant work 👍👊🔥!
I’ll try to get my hands on one my friend 🕵🏻♂️ Thanks for the suggestion!
I really think you can make “ hollow points “ packed with gunpowder and seal them up and have explosive rounds! Anyway always safety first! I showed my friend my recipe for gunpowder and it’s more flammable than real gunpowder! Think I have a bit on a cotton earbud half a foot away and strike a lighter and it goes off from particles in the air! That stuff under pressure and packed is more than tnt! Easy! Anyway it’s late here and I’ll stay in touch with you my friend!🔥👊👍M!
@@AirgunAlley get a old fire extinguisher take out the refillable chamber out! It’s regulated at 9000 psi! You can easily use it for 3000-4000 psi shots and cut the spring down for more easy shots and then even drill the nozzle holes wider for larger dump of ? Air/ co2/ basically the old fire extinguisher used to have a pressure bar that was used to also put pressure back in! Like a bmx inner tube valve! For a styrup pump? They go to 3000 psi! Anyway it’s how you connect it to the barrel and reload? Maybe muzzle load! And paper wad! For pressure! But that’s over 780 psi if you can get it right and just a old fire extinguisher and a pump and paper and a ball bearing! Anyway I’d make it work for you if I was there! M❤️🔥👍!
@@AirgunAlley I believe that it’s a Indian brand gun m8! And you have to cast your own giant pellets! Pack them as hollow points with sulphur! At least red match heads! But be careful with red match heads! They can go off under pressure! I know a mixture of brown match heads one! And 2 and a half red! And make 2 grams up slowly gently grinding till you get purple powder! Then half gram cigarette ash for fusion of air and combustion! ! Here’s a good tip! Keep it all separate red match! Brown match and inert! Fag ash! It’s explosive if u mix it right!!! My friends hand is still burnt from 12 years ago !! M🔥👊
I'm not sure that air venture made all this stuff themself 🤔 like daystate with ther "own made" compressor they bought in China and put ther logo on it and told people made in UK but have forgotten to remove the made in China sticker befor sending them to the yt reviewers. 😂
So what was the point of testing the #8 shells at 30 yards, if its known a real 12gauge shotgun loaded with #8 at 25 yards has poor results?
This is the easiest to understand PCP tutorial I've seen . Thanks man☀️
Hey Scott! Glad you fond it helpful! Mission accomplished :) Thank you so much
Yea that dragon claw is a beast for sure. I think they should use bigger bbs in the slugs...maybe 60 instead of 120. They'd be heavier so they should cause more damage. You should look into getting a fill tank for your dragon claw so you don't have to run the compressor every time you want to shoot it. Great video as always my friend
Thank you so much man! I 100% agree on the shotshells needing bigger sized bbs!
And yes indeed, I will absolutely be going to a dive shop to fill up my tank from now on.
45 mins for two or three refills is a lot! The gun however fills quite fast, with this one compressor. Thanks again my friend!
Very interesting video as always. Super cool rifle 😎. Cheers from your friend in Norway 😃👍
Its gonna work, but your gonna strip the rifling.
Please tell me those .50 shotshells load into the hdr 50, i know with some minor mods certain led pellets can be used
I just got the bubble shot 50cal having a second follow up shot at the turn of a job is much fun
I want to see 68 caliber shotshells. Would be perfect for the hds 68
Haha that would be cool!!
@@AirgunAlley do you think these shot shells would work for the hdr50?
@@jrstoltzfus958hmmm I dunno. Good question. Maybe if you muzzle load them. But it could turn messy and I don’t know if the HDR 50 was the power for these to open and spread 🤔
Thank you for another amazing video and Happy Birthday to your daughter!! ;-] 💥💥💥
Thank you so much my friend!!! ☺️🙌🏼🤠 have a wonderful day!
Is this legal for teenagers
Depends on where you live. Here in Florida you must be 16 years old. That’s literally the only restriction on air guns in this state.
I don’t know other states’ regulations, vest to check locally
I love it keep it up
Thank you very much Adrian! Much appreciated 🙌🏼
This is awesome ! Been wondering if someone made buckshot for air rifles. Thanks for the video bro!👍👍👍
🙌🏼
damn..... you are getting a belly, buddy
Getting? Always had one ahahaha the 40s sure don’t help! ;)
@AirgunAlley I hear ya on that one. I just turned 40 in May. I can still see my abs etc, but I'm sure not ripped anymore, lol
The compressor is awesome I have one I love it
Just found your channel. Very informative content. Subbed!
Hey George, so glad you found it and liked it! Thanks a lot for subscribing my friend!!
I'd love it ,van you own one in UK without a licence?
Greetings from the UK, just found your channel and working through your vids. We can only dream of guns like this over here, I'm just starting the long long process of applying for my Fire Arms Certificate, very strict laws over here.
I love the Dragon Claw but these shot shells surprised me, I thought with the rifled barrel, the spread would be so much less, this is not really an alternative to a shotgun is it?
Amazing rifle with the slugs, definitely need your own pump for this, nothing like the 300 plus shots I get per fill of my Kral Puncher 😂🤣
Regards
Mick
PS, just a thought, because of the huge size, I'm wondering if you could 3d print your own design slugs and other projectiles for a fun video?
Hi Mick, first off thank you so much for finding and enjoying my channel. Wishing you all the best for your certificate application, I’m sure you’ll get it in no time.
I am completely in love with the Dragon Claw. I think these shotshells would be a lot better (and closer to a shotgun) if the bbs were a bit bigger and heavier. While they did make a big spread, I feel like their power was a bit weak.
And funny you “requested” that - I actually made two videos with this rifle: one where I shoot the Devastators (made for the T4E series) and one where I shoot 3D printed saboted 308 bullets by an Italian brand called CODODO. They’re among my most recent videos.
Thanks again for watching!!
@@AirgunAlley Thank you for your reply, I will check out those videos.
It is such a cool looking gun........ I'm into more target focused shooting...... 10m Olympic style with air rifle n pistol and hopefully when I get my licence long range . 22 rifle but I just love watching stuff like this.
I also like the fun way you put your videos across with another you..... Does your alter ego have a name? 🤣
ok muito top ester videi gostei muitoooo ok ja deixei olike eo 75
Just my 2 cents worth here.
I own a C.A.P. SHOT modified wingshot 2,it is a beast for sure. You can send your dragonclaw in to get modded,make a world of difference in power.
Additionally,the shotshells if you have the money you can buy bismuth shot and fill empty shot shells.
Bismuth is smaller and denser,but if you go this route you may need to mod your dragonclaw if it's stock.
I'm currently enjoying 35 yard pass through on cardboard boxes with my wingshot using bismuth loaded shells,and a pretty spread,but if im turkey or bird hunting it is MORE than sufficient at closer range.
Happy birthday to your daughter.
Well I understand you... If I lived close to the Everglades I would most likely get up every morning, taking a walk and enjoying the nature :D and shoot PCP rifles too... :D Great video as always :D Thank you for the great videos :D
Alright mate 👍 enjoy your daughters birthday 🎂. Don't mind watching PCP vids something different and that gun is one bit of kit .those shells at close range would hurt like hell would be picking them out of you for days .keep up the good work 👍
I just modded my first TR50 from 7 to >20 at least as advertised. These would be good for snakes 🐍
Thanks,, Great vid,, as always,,, Good for small game, birds or self defense close range,,
$1k? Wtf
Oh heck yeah buddy 🇨🇦👍
Edit: it's -5°c here this morning
Love the pcp and yes its a investment miss the glades....well done bro💨💥💨💥
I've wanted a Dragon Claw since I first laid eyes on one. They're such pretty air rifles.
They truly are!! And the power on it 😱
Not as pretty as the Wingshot 2
Would love to try one out and compare to my shotguns
Want to buy a .22 Weihrauch HW44 with a bad oring? I'm not even going to attempt to take it apart to fix the leak and there's nobody in America that fixes German guns. When it works, it's a fine pistol.
Nice pcp rifle 😊👍🖖
How heavy is it?
The t is silent
Those shotshells are good for small spaces and crowd control.
😂 with an emphasis on crowd control!
Dove,squirrels,turkeys,have yet to shoot a duck with one here in Florida,but i also use bismuth shot in equivalence to #6 shot shells from air venturi.
Its expensive to use but more pellets more spread.
Very impressive ammunitions 💀👍
❤❤❤❤ nice . Where find head balistic gel ?
Hello my friend! Try this link amzn.to/3JE5DzF
Really interesting to see how the shot shells preform you are the first to show how the populair dragon claw preforms with these! Keep it up!
Hey thanks so much for this my friend!! Much appreciated and will do!!
@@AirgunAlley hello again man i remember a while back you said you sent your HDR to a guy to get it modded i need to do the same can you giveme a trust worthy guy and the version he works with 7.5 or the 11 jouls ?. Please message me back .
@@Bigonewsnetwork808 hey my friend! I wish I could share good news, but the guy is no longer available and I haven’t found anyone since, willing to do it “professionally”.
Very sorry. At the moment I can only suggest video tutorials 🤷🏻♂️ good luck!!
Dobar video.
Your videos are entertaining, not review. Keep them going plus pcps are entering a new Era with those power plenums so doesn't worth right now to get just avarage pcp couse 2 months later will be outdated either by some smart electronics like daystate or some ultimate budget and in same time powerfull and accurate like Hatsan Factor Sniper or BP or Reximex Meta with some huge aftermarket plenum.
What about buck and ball shot?
I shot a few aluminum balls with the Dragon Claw 2 in my latest video. Never the buckshots
OK but what are the specs?
Of what? The gun, the ammo? I’m always giving out specs :)
A rifled barrel will make the shot spin causing it to significantly spread quicker than a smoothbore barrel therefore reducing the effective range but much depending on if that plastic cap holds the shot together in the barrel however in my experience with shot shells in rifles the pellets are already free in the barrel.Now the bigger the pellets the less disrupton.14c or 287 Kelvin warm for Mars!
The real problem was the pellets had no real power. They bounced off more than they penned.
Weird thing is, each buckshot in a shotty is around normal pistol round.
Not sure why people love "tight" groupings.
You can only pen the same hole once and pellets bounce off each other if they are too close at impact vs bone/metals and such.
Seems like you would want more spread than less.
Unless you are sniping 100 yards.
what is the name of the rifle?
Hi, it’s a Dragon Claw by Seneca Air Venturi
50 caliber
@@AirgunAlley categori D ?
From a power and destruction point of view BB's are a waste of time where as the other ammo is effective for sure.Enjoy your family celebration.
Espetacular👍👍
You absolutely talk too much during your videos. Get to the point, get to the message.
Have a nice birthday with ur sweet family dude....great video btw. Some bets for the 5o k til end of the year?