Honda Rubicon 500 Repair: Rusted Wheel cylinders!

Поділитися
Вставка
  • Опубліковано 3 жов 2024
  • Let’s get to work on the 2002 Honda Rubicon 500.
    If you like the content please support the channel by liking and commenting on the videos. Thanks!
    Milwaukee screw Driver set
    amzn.to/4cwk7zr
    Milwaukee M18 3/8" impact i use all the time.
    amzn.to/4bXTSBw
    Milwaukee 1/2" impact for getting the stubborn bolts out.
    amzn.to/3IvcF9X
    Tripod used for filming
    amzn.to/49HAS90
    Battery Jump Pack i use.
    amzn.to/3tQOvTm
    Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
    For business inquires please email Rock Ovitt
    R.ovitt@outlook.com
    #hondarubicon
    #atvrepair
    #rockspowersports
  • Авто та транспорт

КОМЕНТАРІ • 66

  • @yeahright302
    @yeahright302 6 місяців тому +7

    rock is the best on you tube for sure! Just regular dude just trying to make a living and seems very genuine!!plus that dude has great hair!!!so jelly of it as I'm balding and miss my great hair!!!

  • @Robbinsbuiltgarage
    @Robbinsbuiltgarage 6 місяців тому +5

    I have never seen snap ring pliers like that! Thats awesome! I will have to get a pair!! Great video!

  • @jamiejohnston4983
    @jamiejohnston4983 3 місяці тому

    You made that look smooth and easy.
    I usually say a lot of choice words and throw a wrench or 2 and swear next time I will hire it done

  • @donwalters8877
    @donwalters8877 5 місяців тому +1

    I have a 09 foreman 500 eps, best machine I ever owned

    • @rockspowersports
      @rockspowersports  5 місяців тому

      I had a 07 foreman 500 without the eps for a little while. It was a great dependable machine.

  • @BenjaminBaker29
    @BenjaminBaker29 6 місяців тому +2

    These videos should be played in school! These videos are fun to watch, but teach a bunch! I live watching them! Jeep up the good work brother!

  • @johnnugent6516
    @johnnugent6516 6 місяців тому

    Another Great Job I like how you’re straight up and no short cuts that’s the way I am do it right the first time Arkansas Wavin

  • @jocoginder2706
    @jocoginder2706 6 місяців тому +1

    Great videós! Greetings from Hungary

  • @luvthesnow
    @luvthesnow 6 місяців тому +2

    Great videos. You must be pretty rural to be able to leave all that stuff out like that!

    • @rockspowersports
      @rockspowersports  6 місяців тому

      Thanks, glad you enjoy them.
      And yes I do live in the middle of nowhere.

  • @joea7697
    @joea7697 6 місяців тому +4

    Love your content, keep up the good work

  • @georgehuffert1800
    @georgehuffert1800 6 місяців тому +3

    I seen you use the same snap ring pliers I use them to it makes taking snap ring off almost effortless and since I do have a 85 Husqvarna that is mostly put together with snap ring

    • @rockspowersports
      @rockspowersports  6 місяців тому +2

      They work great! Much better than the plier style ones.

  • @adrienfortin4411
    @adrienfortin4411 6 місяців тому +3

    Great video as always. I just took my sportsman out of winter storage today. Put air in tires, greased it and did air filter.

    • @rockspowersports
      @rockspowersports  6 місяців тому

      Nice, it’s getting to be that time of year!

  • @grousehunter67
    @grousehunter67 6 місяців тому +1

    Haha your killing me i miss my Rubicon the ride is a back killer for me now

    • @rockspowersports
      @rockspowersports  6 місяців тому +1

      I really do like the Rubicon’s but there is much better riding trail machines for sure.

  • @thomasitta
    @thomasitta 6 місяців тому +1

    I've always wanted to open a small engine repair shop, atv/ and snowmobile

  • @christianstanek8265
    @christianstanek8265 6 місяців тому +1

    Good informative video, keep it up

  • @reddirtrider6190
    @reddirtrider6190 6 місяців тому +1

    Awesome video as always, I’d love to see a shop tour, love seeing people doing great work and not having a top of the line shop to do it in !

  • @nathanhooper6413
    @nathanhooper6413 6 місяців тому +1

    Starts way better than my foreman 450

  • @brucemacdonald4672
    @brucemacdonald4672 6 місяців тому

    Another great job. ☃️👍👍

  • @markbuck9299
    @markbuck9299 6 місяців тому +1

    Simple enough setup !! Not sure why Honda wouldn’t use disc brakes on them ??

    • @rockspowersports
      @rockspowersports  6 місяців тому +1

      It took Honda a while to switch over to disk brakes.

  • @millerbification
    @millerbification 6 місяців тому

    Well that’s a true Honda for that job best in class in my words and plus getting small work done and also I’m planning on buying a new version of Honda foreman rubicon 520CC just cause of work

  • @Williamxmr
    @Williamxmr 6 місяців тому +1

    That claw hammer lol

  • @VopteterjfhhrBhtehd
    @VopteterjfhhrBhtehd 6 місяців тому +1

    Hi love the content

  • @swanson3k
    @swanson3k 6 місяців тому +1

    Hope to see some CF Motos on here soon 😏

    • @rockspowersports
      @rockspowersports  6 місяців тому +1

      Should have a sxs coming soon. Just for a test drive/review.

  • @jamesstewart3785
    @jamesstewart3785 6 місяців тому

    Should have done a dics brake conversion

  • @Jonathan_From_TT
    @Jonathan_From_TT 6 місяців тому +1

    Howdy duty from indiana love to when you upload

  • @kraftcraft2934
    @kraftcraft2934 6 місяців тому

    Changing that frunt diff is a mother smoke cigs n drink beer before tackling that lol

  • @lordpyrjzn1859
    @lordpyrjzn1859 6 місяців тому +1

    16in of snow here in Maine

  • @motofarmmx2430
    @motofarmmx2430 6 місяців тому +2

    This is the one thing I hate most about hondas especially used ones. Every used Honda I've encountered always at minimum needed the wheel cylinders adjusted. Most of the used ones around me have no brakes.

    • @rockspowersports
      @rockspowersports  6 місяців тому

      For sure! They really need to be taken apart every couple of years and the adjusters should be cleaned and greased.

  • @adrienfortin4411
    @adrienfortin4411 6 місяців тому +1

    You have a old engine you can put on a stand and torture test? Would be awesome 👌

    • @rockspowersports
      @rockspowersports  6 місяців тому +1

      Unfortunately a good running spare engine is few and far between around here.

  • @Pjw350
    @Pjw350 6 місяців тому +2

    Love the content. Do you typically use all balls bearing kits? What about the wheel cylinders? What brand do you trust for those?

    • @Pjw350
      @Pjw350 6 місяців тому +2

      Those drum brake setups are lots and lots of labor- you make it look easy.

    • @rockspowersports
      @rockspowersports  6 місяців тому +1

      I do use All balls quite a bit, I actually use them for the wheel cylinder rebuild kits as well. These wheel cylinders were a cheaper set from Vito’s.

    • @Pjw350
      @Pjw350 6 місяців тому

      @@rockspowersports i have used all balls for years without issues. I wont trust anything for brake calipers/cylinders from amazon.

  • @Williamxmr
    @Williamxmr 6 місяців тому +1

    If you have a race stuck just run an inch long bead on it with a MIG and let it cool, itll fall out.

    • @rockspowersports
      @rockspowersports  6 місяців тому +1

      If they are really stuck I’ll usually weld a bolt or something inbetween the outside bearing race. The heat helps tremendously and this give you something to press or hammer on evenly.

  • @hydrafishy9367
    @hydrafishy9367 18 днів тому

    What’s squeezing bc my rubicon does the same exact thing?

  • @pyralux01
    @pyralux01 6 місяців тому

    No alignment needed or possible?

  • @Hyngyynj
    @Hyngyynj 6 місяців тому +1

    I’ve always been scared of those Honda transmissions, are they fairly reliable?

    • @rockspowersports
      @rockspowersports  6 місяців тому

      I have a grave yard full of Rubicons that have bad transmissions. Maintenance is a huge key for the hondamatic. The earlier models were known to have more problems than the 05+

    • @Hyngyynj
      @Hyngyynj 6 місяців тому

      @@rockspowersports good to know! I bought those push pin pliers from harbor freight the other day. Absolute lifesaver and I prob wouldn’t never knew about them if it wasn’t for your videos haha thank you!

  • @nickingram9640
    @nickingram9640 6 місяців тому

    Why two wheel cylinders per side??

  • @StarknightMT_official
    @StarknightMT_official 6 місяців тому

    Hello, Are you interested in testing our products? We would like to invite you to test the Air Vent Windshield for your 2012 polaris RZR S 800

  • @brandonharrison4919
    @brandonharrison4919 6 місяців тому +1

    How do I get ahold of you and do you answer questions

    • @rockspowersports
      @rockspowersports  6 місяців тому

      What question do you have?

    • @brandonharrison4919
      @brandonharrison4919 6 місяців тому

      @@rockspowersports I have 2003 handa 500 rubicon its hard to get started it will crank until the battery is dead but if it starts it runs like a top until you shut it off then it won't start again

    • @rockspowersports
      @rockspowersports  6 місяців тому

      I’m not sure if you saw my last video of this one but I had to use the primer on the bottom of the carburetor to start this before cleaning the fuel system. Have you tried to use the primer on your Honda?

    • @brandonharrison4919
      @brandonharrison4919 6 місяців тому

      So yea I seen that one and tried it but the same thing I rebuilt the cab that's on it and tried 2 Amazon cabs but the something I can't even get it to start on Starting fluid

    • @brandonharrison4919
      @brandonharrison4919 6 місяців тому

      I have plenty of spark
      And fuel When I bought this thing.The transmission wasn't working so I replaced the oil pump drive chain and timing change.
      But had this problem before I did that work

  • @Robbiemega
    @Robbiemega 6 місяців тому +2

    Love the videos mate keep the good work up