Bro, don't you love it when you paid for your shit and can give an honest opinion not only about the product but the customer support after the sale. Love it!
Brother, One thing u will observe about me is I'll give the RAW DEAL even if its sponsored or not....I believe it's the only way to do business. I also thank u for the support!!!
@@WikedWips how have they held up since install? If the harnesses I have on the way wind up not working I’ll probably cave and just do it that way. Only difference is my headlights are the spyders.
I've nevernhad an issue. The taps are still on the harness, but I have the wires plug and play in between the light and the headlight harness to make it easy when I take off my bumper
@@WikedWips between your video and figuring out a few things I got them hooked up and working. Should have went with the regulars instead of the tinted though. They barely show during the day.
I cracked up at the comments about the instructions “red to red” “pointy end first” that was a good review and a good tutorial... they definitely are the best looking ones I have seen and way better than the subispeed ones!!! Looking good bro!!!
Are all these cords on the back of the headlight? I don’t have cords wrapped in a white jacket. I also have Subispeed v2 headlights idk if that makes a difference.
They are the HID lights found in the limited WRX or in the STI. The giveaway is the black bar that goes across the innermost light (which is the high beam on Premium and base trims with halogen projectors). Base and premium trim put the turn indicator in the bumper/fog bezel.
I like the look of these bezels a lot and am considering getting OLM’s version on subispeed. Does the top most bar function as a DRL as well or only a turn signal? Does that bar just stay off until the turn signal is activated then? It’s hard to tell in videos/photos.
I just saw the tri bar bezel while looking on subispeed. Do you know are these the same as Smy? Also did you buy the clear or smoked version? Thanks for the great install video. If I decide to buy these that will help greatly on the install.
Hey thx for watching and plz share!!! Yes, its the same thing and I see that OLM finally copied it 2 their own version!!! Still should work the same!!! I have the clear version!!! Happy install!
My favorite part was when you pulled up the screen record on em. Lol They may need to follow your other installs to get better with their own directions on install instructions on their page. Overall great vid, especially with content on clarity with the small point install sections that most usually forget. I know when I first took my bumper off, I was a bit timid with some clips and pull. Now it's so simple to do. Keep it goin!
Thx josh, I had to pull out the big guns to shine a light on some of these companies that love to take ur money and leave u high and dry!! I appreciate ur support as well😎
Damn good thing I watched your vid my dude, no offense but I won’t be buying these they look dope don’t get me wrong but I’m not looking to cut shit up to get something that’s supposed to fit factory. You said the company’s in Brooklyn? Shit is probably made in Bensonhurst in Asian guys basement
Hulk looking ready to shred the streets
Most def bro, thank u for the support!!!!
thx for making this vid
For sure!
Bro, that looks so aggressive 😍, it’s way better than high beam as DRL, and way cooler and functional
Thx a million Jerry, and yes they def look super aggressive and a great addition to the Hulk!!!
Fucking G!!!! My dude always with the fire videos
😎😎
Love the way these lights came out OCD LUKE with the grand slam again 🥵🥵🥵🥵🥵🥵🥵🥵🥵🥵🥵🥵🥵
Lmaooooooo OCD
Bro, don't you love it when you paid for your shit and can give an honest opinion not only about the product but the customer support after the sale. Love it!
Brother, One thing u will observe about me is I'll give the RAW DEAL even if its sponsored or not....I believe it's the only way to do business. I also thank u for the support!!!
Super detailed install instructions .. looks aggressive on The Hulk!
Thank u Mariah, super glad u enjoyed the vid, and thank u for the support!🤩
Ohhhhh dang. I got these too!! Super helpful for dummies like me 😝😝😝
You are very welcome Shannon!
Lukas and I watched the entire video and we are extremely impressed with the work you do with Hulk.
Why thank u😍😍
Zip-tie saves the day ! Those fogs are 🔥. I’d hate for the Hulk to be driving behind me at night time haha.
😛😛😛😛😛
zip tie. Genius. Love the gloss black look and your excitement when it worked HAHA everything looks amazing
Lmaooooo, thx a million chris!!! I get carried away lmao.
Just facelifted my 15 to the 18 bumper and I’m trying to figure out how to make these bezels work and be pnp instead of t tap.
I feel you but the taps are wayyyy easier man
@@WikedWips how have they held up since install? If the harnesses I have on the way wind up not working I’ll probably cave and just do it that way. Only difference is my headlights are the spyders.
I've nevernhad an issue. The taps are still on the harness, but I have the wires plug and play in between the light and the headlight harness to make it easy when I take off my bumper
@@WikedWips that’s good to know thanks.
@@WikedWips between your video and figuring out a few things I got them hooked up and working. Should have went with the regulars instead of the tinted though. They barely show during the day.
I cracked up at the comments about the instructions “red to red” “pointy end first” that was a good review and a good tutorial... they definitely are the best looking ones I have seen and way better than the subispeed ones!!! Looking good bro!!!
Hey Matt, thx a bunch for the feedback and yes I try my best to help out. I just hate to be taken for a ride if u know wat I mean!!
My man said at the start the hardest part should be jacking up the car or putting it on a ramp. This turned out to be false
Spider-Man `` yuppp, happens when u have shitty people selling products with no support. But hopefully u learned something new
Making me fall more in love with hulk
Looks so good man
Thx Aaron, glad u enjoyed the vid!
Those bezels pop out no problem when you hit a deer, just gotta pick them up from opposite sides of the road 😭
Lmaooooooo deaddddd
which one did you tap into for DRL
It's literally in the video
I like that ! Dope unique work homie fireee
So dope!
Much appreciated!!!!!!
Are all these cords on the back of the headlight? I don’t have cords wrapped in a white jacket. I also have Subispeed v2 headlights idk if that makes a difference.
Hey Kyle, if you have Instagram message me @WikedWips
Same here
What headlights do you have? those aren’t oem?
Official A. B my headlights are oem! Why?
They are the HID lights found in the limited WRX or in the STI. The giveaway is the black bar that goes across the innermost light (which is the high beam on Premium and base trims with halogen projectors). Base and premium trim put the turn indicator in the bumper/fog bezel.
niceeeeeee
Thank u!
Holy shit they as bright as regular fogs
Yupppp
I like the look of these bezels a lot and am considering getting OLM’s version on subispeed. Does the top most bar function as a DRL as well or only a turn signal? Does that bar just stay off until the turn signal is activated then? It’s hard to tell in videos/photos.
These bezels really bring out the front end of the subie....the top is the turn signal and not a running light/DRL.
Thx 4 watching!!
Great content as always 💯 💯
Thank u brother!!!!!
They look super dope!
Yessssirrrrrr, thank u for standing by me bro!!
Good video! Looks great! Love the gloss black! 👊😎
Thx Tommy, great product from shitty ass people!!
Love the bezels man!! 😍
Thx brother!!! Much appreciated!!
Love the vid🔥
Yasssssss, thank u!!!
Loved the victory holler when you first tested it 🤣🤣 SSSWWWEEEEEETTT
Great content and the look amazing
Hulk happy
Lmaoooooooo, thx man, I get carried away sometimes!!!!! Tjx for the support!!
Entertaining but also very informative video as always. Thanks Luke!
Lmaooooooo, I try bro....🤓🤓
Yooo that’s so dope! 🔥🔥🔥🔥
🤩🤩thank u 4 supporting me!
Looks awesome as usual. 👍👍
I just saw the tri bar bezel while looking on subispeed. Do you know are these the same as Smy? Also did you buy the clear or smoked version? Thanks for the great install video. If I decide to buy these that will help greatly on the install.
Hey thx for watching and plz share!!! Yes, its the same thing and I see that OLM finally copied it 2 their own version!!! Still should work the same!!! I have the clear version!!! Happy install!
Thanks bro for the vid. Just install mine following you instructions. That shit nice. My bezels fit perfectly tho.
That's awesome 2 hear and I'm glad I could help 😀
✌🏾 this car gets better and better I swear 👀
Thank u!!!! I really appreciate the feedback!!!
Yeah man this look real great I like that alot!!
Thx a lot Rich, I appreciate your input, much luv!
Those headlight turn signals are dope how did you get them like that?
Here u go! ua-cam.com/video/aVJs88SizDo/v-deo.html
I need these in my life !!!
Thx 4 the feedback and yessss it's a very nice piece!!! Jus shitty people who sell it!
What mod do the headlights have for that sequential?
It's the turn signal that's sequential
@@WikedWips is it an add-on or some aftermarket full headlight set? Looks great
Oh I’m sorry you were speaking about my headlights? I have sequential led strips on there
ua-cam.com/video/aVJs88SizDo/v-deo.html
What wiring harness do you use man can you help me out. Thanks
Hey how are u...are u on Instagram or Facebook messenger?
@@WikedWips yes Facebook
Look me up on messenger my name is Luke Beharry
Someone forgot to pop that out. Nooooot gonna say who but... *ahem* it was me. 🤣
🤣🤣🤣
This turned out so well man, love seeing more custom jobs done, gives the car more personal character 😎🔥🔥
Most definitely Francis, thank u for all ur support as well!!
My favorite part was when you pulled up the screen record on em. Lol They may need to follow your other installs to get better with their own directions on install instructions on their page. Overall great vid, especially with content on clarity with the small point install sections that most usually forget. I know when I first took my bumper off, I was a bit timid with some clips and pull. Now it's so simple to do. Keep it goin!
Thx josh, I had to pull out the big guns to shine a light on some of these companies that love to take ur money and leave u high and dry!! I appreciate ur support as well😎
Yo what custom led strip did you use on your headlights?!? Looks hella dope!! 🔥
I used a brand called carlits from amazon but this one is better amzn.to/2yxTsUp
🔥🔥🔥🔥
Thx homie!!!
Those look sick! What company makes them? I need some products like this for my car
Thx for the love Matt!!!!
@@WikedWips damn products are nice and all but if they don't have good customer service it kinda ruins the experience
@@islandz33 and now u understand!!
im gonna drive up to New York when i get my sti so you can help me out lol
Absolutely bro!!!
Looks amazing love the build keep up the good work🤘
Thank you for the support & feedback as well, more great things to come!
Damn good thing I watched your vid my dude, no offense but I won’t be buying these they look dope don’t get me wrong but I’m not looking to cut shit up to get something that’s supposed to fit factory. You said the company’s in Brooklyn? Shit is probably made in Bensonhurst in Asian guys basement
Lmaoooo, many companies make them now but you still have to slice some pieces off to make it fit!! Thx for watching
“Look at this flimsy a$$ $hit” Lmao
Sometimes you just gotta Macgyver your own workaround. Looks sick tho!! 🔥🔥
Thx Ken, but we both know I shouldn't have 2 Macgyver shitttt with the price I paid for it!!!
Another dope vid! Very well done altough it wasn't easy to install! Looks perfect on tha Hulk and in the night - awesome!💯🔥🙌🏻
Those made hulk look even more aggressive 😈 Great video homie! & Nice STI seat belt covers, those are dope! Can't wait for the next one. -brandyns_sti
Thank u for checking out the vid bro, I really appreciate the love as well as the feedback!!!!😎
Full send it! Jk 😂
😉😉